2 ------------------------
3 - kernel modules are renamed. openvswitch_mod.ko is now
4 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
5 - Increased the number of NXM registers to 8.
6 - Added ability to configure dscp setting for manager and controller
7 connections. By default, these connections have a DSCP value of
8 Internetwork Control (0xc0).
9 - Added the granular link health statistics, 'cfm_health', to an
12 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
13 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
16 - Added the "dump-ports-desc" command to retrieve port
17 information using the new port description multipart messages.
19 - Added support for spawning ovs-test server from the client.
20 - Now ovs-test is able to automatically create test bridges and ports.
21 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
22 - The "coverage/log" command previously available through ovs-appctl
23 has been replaced by "coverage/show". The new command replies with
24 coverage counter values, instead of logging them.
28 ------------------------
30 - LACP bonds no longer fall back to balance-slb when negotiations fail.
31 Instead they drop traffic.
32 - The default bond_mode changed from SLB to active-backup, to protect
33 unsuspecting users from the significant risks of SLB bonds (which are
34 documented in vswitchd/INTERNALS).
35 - Load balancing can be disabled by setting the bond-rebalance-interval
38 - Added support for bitwise matching on TCP and UDP ports.
39 See ovs-ofctl(8) for more information.
40 - NXM flow dumps now include times elapsed toward idle and hard
42 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
43 controllers more precise control over which OpenFlow messages they
44 receive asynchronously.
45 - New "fin_timeout" action.
46 - Added "fin_timeout" support to "learn" action.
47 - New Nicira action NXAST_CONTROLLER that offers additional features
48 over output to OFPP_CONTROLLER.
49 - The default MAC learning timeout has been increased from 60 seconds
50 to 300 seconds. The MAC learning timeout is now configurable.
51 - When QoS settings for an interface do not configure a default queue
52 (queue 0), Open vSwitch now uses a default configuration for that
53 queue, instead of dropping all packets as in previous versions.
55 - Logging to console and file will have UTC timestamp as a default for
56 all the daemons. An example of the default format is
57 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default
59 - The syntax of commands and options to set log levels was simplified,
60 to make it easier to remember.
61 - New support for limiting the number of flows in an OpenFlow flow
62 table, with configurable policy for evicting flows upon
63 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
65 - New "enable-async-messages" column in the Controller table. If set to
66 false, OpenFlow connections to the controller will initially have all
67 asynchronous messages disabled, overriding normal OpenFlow behavior.
68 - ofproto-provider interface:
69 - "struct rule" has a new member "used" that ofproto implementations
70 should maintain by updating with ofproto_rule_update_used().
72 - The new option --timestamp causes the "monitor" command to print
73 a timestamp with every update.
74 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
78 ------------------------
80 - Added support for querying, modifying, and deleting flows
81 based on flow cookie when using NXM.
82 - Added new NXM_PACKET_IN format.
83 - Added new NXAST_DEC_TTL action.
85 - Added daemonization support to the monitor and snoop commands.
87 - The "find" command supports new set relational operators
88 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
89 - ovsdb-tool now uses the typical database and schema installation
90 directories as defaults.
94 ------------------------
95 - Compatible with Open vSwitch kernel module included in Linux 3.3.
96 - New "VLAN splinters" feature to work around buggy device drivers
97 in old Linux versions. (This feature is deprecated. When
98 broken device drivers are no longer in widespread use, we will
99 delete this feature.) See ovs-vswitchd.conf.db(5) for more
102 - Added ability to match on IPv6 flow label through NXM.
103 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
104 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
105 - Added ability to modify ECN bits in IPv4.
106 - Added ability to modify TTL in IPv4.
108 - Don't require the "normal" action to use mirrors. Traffic will
109 now be properly mirrored for any flows, regardless of their
111 - Track packet and byte statistics sent on mirrors.
112 - The sFlow implementation can now usually infer the correct agent
113 device instead of having to be told explicitly.
115 - New "fdb/flush" command to flush bridge's MAC learning table.
117 - A new distributed testing tool that allows one to diagnose performance
118 and connectivity issues. This tool currently is not included in RH or
120 - RHEL packaging now supports integration with Red Hat network scripts.
122 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
123 to active-backup. SLB bonds carry significant risks with them
124 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
125 users from running into. Users are advised to update any scripts or
126 configuration which may be negatively impacted by explicitly setting
127 the bond mode which they want to use.
131 ------------------------
133 - Added an OpenFlow extension which allows the "output" action to accept
135 - Added an OpenFlow extension for flexible learning.
136 - Bumped number of NXM registers from four to five.
138 - New "version" command to determine version of running daemon.
139 - If no argument is provided for "cfm/show", displays detailed
140 information about all interfaces with CFM enabled.
141 - If no argument is provided for "lacp/show", displays detailed
142 information about all ports with LACP enabled.
144 - New "set-if" command to modify a datapath port's configuration.
146 - The software switch now supports 255 OpenFlow tables, instead
147 of just one. By default, only table 0 is consulted, but the
148 new NXAST_RESUBMIT_TABLE action can look up in additional
149 tables. Tables 128 and above are reserved for use by the
150 switch itself; please use only tables 0 through 127.
151 - Add support for 802.1D spanning tree (STP).
152 - Fragment handling extensions:
153 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
154 fields are made available for matching in fragments with
156 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
157 via "ip_frag" in ovs-ofctl).
158 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
159 fragment handling policy.
160 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
161 By default it remains compatible with the old version and other
162 standards-based implementations.
163 - Flow setups are now processed in a round-robin manner across ports
164 to prevent any single client from monopolizing the CPU and conducting
165 a denial of service attack.
166 - Added support for native VLAN tagging. A new "vlan_mode"
167 parameter can be set for "port". Possible values: "access",
168 "trunk", "native-tagged" and "native-untagged".
169 - test-openflowd has been removed. Please use ovs-vswitchd instead.
172 ------------------------
173 - New "ofproto" abstraction layer to ease porting to hardware
175 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
176 - Datapath support for Linux kernels up to 3.0.
178 - New "bundle" and "bundle_load" action extensions.
180 - Implement table unique constraints.
181 - Support cooperative locking between callers.
183 - New "-s" option for "show" command prints packet and byte
184 counters for each port.
186 - New "--readd" option for "replace-flows".
188 - New "show" command to print an overview of configuration.
189 - New "comment" command to add remark that explains intentions.
190 - ovs-brcompatd has been rewritten to fix long-standing bugs.
191 - ovs-openflowd has been renamed test-openflowd and moved into the
192 tests directory. Its presence confused too many users. Please
193 use ovs-vswitchd instead.
194 - New ovs-benchmark utility to test flow setup performance.
195 - A new log level "off" has been added. Configuring a log facility
196 "off" prevents any messages from being logged to it. Previously,
197 "emer" was effectively "off" because no messages were ever logged at
198 level "emer". Now, errors that cause a process to exit are logged
200 - "configure" option --with-l26 has been renamed --with-linux, and
201 --with-l26-source has been renamed --with-linux-source. The old
202 names will be removed after the next release, so please update
204 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
205 datapath/linux-2.6/compat-2.6 directories.
207 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
208 Please use the extensible match extensions instead.
209 - Removed the Maintenance_Point and Monitor tables in an effort
210 to simplify 802.1ag configuration.
211 - Performance and scalability improvements
215 ------------------------
216 - Ability to define policies over IPv6
219 - Support for extensible match extensions to OpenFlow
221 - Support for HFSC qdisc.
222 - Queue used by in-band control can now be configured.
224 - Kernel<->userspace interface has been reworked and should be
225 close to a stable ABI now.
226 - "Port group" concept has been dropped.
227 - GRE over IPSEC tunnels
229 - New active backup bonding mode.
230 - New L4 hashing support when LACP is enabled.
231 - Source MAC hash now includes VLAN field also.
233 - Greatly improved handling of large flow tables
235 - "show" command now prints full vport configuration.
236 - "dump-groups" command removed since kernel support for
237 port groups was dropped.
239 - New commands for working with the new Managers table.
240 - "list" command enhanced with new formatting options and --columns
242 - "get" command now accepts new --id option.
243 - New "find" command.
245 - New "queue-stats" command for printing queue stats.
246 - New commands "replace-flows" and "diff-flows".
247 - Commands to add and remove flows can now read from files.
248 - New --flow-format option to enable or disable NXM.
249 - New --more option to increase OpenFlow message verbosity.
250 - Removed "tun-cookie" command, which is no longer useful.
251 - ovs-controller enhancements for testing various features.
252 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
253 bugs. New ovs-vlan-bug-workaround command for enabling and
254 disabling a workaround for these driver bugs.
256 - "Resubmit" actions now update flow statistics.
257 - New "register" extension for use in matching and actions, via NXM.
258 - New "multipath" experimental action extension.
259 - New support for matching multicast Ethernet frames, via NXM.
260 - New extension for OpenFlow vendor error codes.
261 - New extension to set the QoS output queue without actually
262 sending to an output port.
263 - Open vSwitch now reports a single flow table, instead of
264 separate hash and wildcard tables. This better models the
265 current implementation.
266 - New experimental "note" action.
267 - New "ofproto/trace" ovs-appctl command and associated utilities
268 to ease debugging complex flow tables.
270 - Schema documentation now includes an entity-relationship diagram.
271 - The database is now garbage collected. In most tables,
272 unreferenced rows will be deleted automatically.
273 - Many tables now include statistics updated periodically by
274 ovs-vswitchd or ovsdb-server.
275 - Every table now has an "external-ids" column for use by OVS
277 - There is no default controller anymore. Each bridge must have its
278 controller individually specified.
279 - The "fail-mode" is now a property of a Bridge instead of a Controller.
280 - New versioning and checksum features.
281 - New Managers table and manager_options column in Open_vSwitch table
282 for specifying managers. The old "managers" column in the
283 Open_vSwitch table has been removed.
284 - Many "name" columns are now immutable.
286 - Dropped support for XenServer pre-5.6.100.
287 - Dropped support for Linux pre-2.6.18.
288 - Dropped controller discovery support.
289 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
290 Statistics reporting in the database is a rough equivalent.
291 - Dropped the "corekeeper" package (now separate, at
292 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
293 - Performance and scalability improvements
296 v1.1.0pre2 - 13 Sep 2010
297 ------------------------
300 v1.1.0pre1 - 31 Aug 2010
301 ------------------------
302 - OpenFlow 1.0 slicing (QoS) functionality
303 - Python bindings for configuration database (no write support)
304 - Performance and scalability improvements
309 - New "patch" interface type
314 - Configuration database with remote management
317 - Support for XenServer 5.5 and 5.6
318 - Performance and scalability improvements
321 v0.99.2 - 18 Feb 2010
322 ---------------------
325 v0.99.1 - 25 Jan 2010
326 ---------------------
327 - Add support for sFlow(R)
328 - Make headers compatible with C++
331 v0.99.0 - 14 Jan 2010
332 ---------------------
333 - User-space forwarding engine
336 v0.90.7 - 29 Nov 2009
337 ---------------------
338 - Add support for NetFlow active timeouts
345 v0.90.5 - 21 Sep 2009
346 ---------------------
347 - Generalize in-band control to more diverse network setups