arch/arm/mach-sa1100/neponset.c

   1 /*
   2  * linux/arch/arm/mach-sa1100/neponset.c
   3  *
   4  */
   5 #include <linux/kernel.h>
   6 #include <linux/init.h>
   7 #include <linux/ptrace.h>
   8 #include <linux/tty.h>
   9 #include <linux/ioport.h>
  10 #include <linux/serial_core.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/slab.h>
  13
  14 #include <asm/hardware.h>
  15 #include <asm/mach-types.h>
  16 #include <asm/irq.h>
  17 #include <asm/mach/map.h>
  18 #include <asm/mach/irq.h>
  19 #include <asm/mach/serial_sa1100.h>
  20 #include <asm/arch/assabet.h>
  21 #include <asm/arch/neponset.h>
  22 #include <asm/hardware/sa1111.h>
  23 #include <asm/sizes.h>
  24
  25 /*
  26  * Install handler for Neponset IRQ.  Note that we have to loop here
  27  * since the ETHERNET and USAR IRQs are level based, and we need to
  28  * ensure that the IRQ signal is deasserted before returning.  This
  29  * is rather unfortunate.
  30  */
  31 static void
  32 neponset_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  33 {
  34         unsigned int irr;
  35
  36         while (1) {
  37                 struct irqdesc *d;
  38
  39                 /*
  40                  * Acknowledge the parent IRQ.
  41                  */
  42                 desc->chip->ack(irq);
  43
  44                 /*
  45                  * Read the interrupt reason register.  Let's have all
  46                  * active IRQ bits high.  Note: there is a typo in the
  47                  * Neponset user's guide for the SA1111 IRR level.
  48                  */
  49                 irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
  50
  51                 if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
  52                         break;
  53
  54                 /*
  55                  * Since there is no individual mask, we have to
  56                  * mask the parent IRQ.  This is safe, since we'll
  57                  * recheck the register for any pending IRQs.
  58                  */
  59                 if (irr & (IRR_ETHERNET | IRR_USAR)) {
  60                         desc->chip->mask(irq);
  61
  62                         if (irr & IRR_ETHERNET) {
  63                                 d = irq_desc + IRQ_NEPONSET_SMC9196;
  64                                 desc_handle_irq(IRQ_NEPONSET_SMC9196, d, regs);
  65                         }
  66
  67                         if (irr & IRR_USAR) {
  68                                 d = irq_desc + IRQ_NEPONSET_USAR;
  69                                 desc_handle_irq(IRQ_NEPONSET_USAR, d, regs);
  70                         }
  71
  72                         desc->chip->unmask(irq);
  73                 }
  74
  75                 if (irr & IRR_SA1111) {
  76                         d = irq_desc + IRQ_NEPONSET_SA1111;
  77                         desc_handle_irq(IRQ_NEPONSET_SA1111, d, regs);
  78                 }
  79         }
  80 }
  81
  82 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
  83 {
  84         u_int mdm_ctl0 = MDM_CTL_0;
  85
  86         if (port->mapbase == _Ser1UTCR0) {
  87                 if (mctrl & TIOCM_RTS)
  88                         mdm_ctl0 &= ~MDM_CTL0_RTS2;
  89                 else
  90                         mdm_ctl0 |= MDM_CTL0_RTS2;
  91
  92                 if (mctrl & TIOCM_DTR)
  93                         mdm_ctl0 &= ~MDM_CTL0_DTR2;
  94                 else
  95                         mdm_ctl0 |= MDM_CTL0_DTR2;
  96         } else if (port->mapbase == _Ser3UTCR0) {
  97                 if (mctrl & TIOCM_RTS)
  98                         mdm_ctl0 &= ~MDM_CTL0_RTS1;
  99                 else
 100                         mdm_ctl0 |= MDM_CTL0_RTS1;
 101
 102                 if (mctrl & TIOCM_DTR)
 103                         mdm_ctl0 &= ~MDM_CTL0_DTR1;
 104                 else
 105                         mdm_ctl0 |= MDM_CTL0_DTR1;
 106         }
 107
 108         MDM_CTL_0 = mdm_ctl0;
 109 }
 110
 111 static u_int neponset_get_mctrl(struct uart_port *port)
 112 {
 113         u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 114         u_int mdm_ctl1 = MDM_CTL_1;
 115
 116         if (port->mapbase == _Ser1UTCR0) {
 117                 if (mdm_ctl1 & MDM_CTL1_DCD2)
 118                         ret &= ~TIOCM_CD;
 119                 if (mdm_ctl1 & MDM_CTL1_CTS2)
 120                         ret &= ~TIOCM_CTS;
 121                 if (mdm_ctl1 & MDM_CTL1_DSR2)
 122                         ret &= ~TIOCM_DSR;
 123         } else if (port->mapbase == _Ser3UTCR0) {
 124                 if (mdm_ctl1 & MDM_CTL1_DCD1)
 125                         ret &= ~TIOCM_CD;
 126                 if (mdm_ctl1 & MDM_CTL1_CTS1)
 127                         ret &= ~TIOCM_CTS;
 128                 if (mdm_ctl1 & MDM_CTL1_DSR1)
 129                         ret &= ~TIOCM_DSR;
 130         }
 131
 132         return ret;
 133 }
 134
 135 static struct sa1100_port_fns neponset_port_fns __initdata = {
 136         .set_mctrl      = neponset_set_mctrl,
 137         .get_mctrl      = neponset_get_mctrl,
 138 };
 139
 140 static int neponset_probe(struct platform_device *dev)
 141 {
 142         sa1100_register_uart_fns(&neponset_port_fns);
 143
 144         /*
 145          * Install handler for GPIO25.
 146          */
 147         set_irq_type(IRQ_GPIO25, IRQT_RISING);
 148         set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 149
 150         /*
 151          * We would set IRQ_GPIO25 to be a wake-up IRQ, but
 152          * unfortunately something on the Neponset activates
 153          * this IRQ on sleep (ethernet?)
 154          */
 155 #if 0
 156         enable_irq_wake(IRQ_GPIO25);
 157 #endif
 158
 159         /*
 160          * Setup other Neponset IRQs.  SA1111 will be done by the
 161          * generic SA1111 code.
 162          */
 163         set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ);
 164         set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
 165         set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ);
 166         set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
 167
 168         /*
 169          * Disable GPIO 0/1 drivers so the buttons work on the module.
 170          */
 171         NCR_0 = NCR_GP01_OFF;
 172
 173         return 0;
 174 }
 175
 176 #ifdef CONFIG_PM
 177
 178 /*
 179  * LDM power management.
 180  */
 181 static int neponset_suspend(struct platform_device *dev, pm_message_t state)
 182 {
 183         /*
 184          * Save state.
 185          */
 186         if (!dev->dev.power.saved_state)
 187                 dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
 188         if (!dev->dev.power.saved_state)
 189                 return -ENOMEM;
 190
 191         *(unsigned int *)dev->dev.power.saved_state = NCR_0;
 192
 193         return 0;
 194 }
 195
 196 static int neponset_resume(struct platform_device *dev)
 197 {
 198         if (dev->dev.power.saved_state) {
 199                 NCR_0 = *(unsigned int *)dev->dev.power.saved_state;
 200                 kfree(dev->dev.power.saved_state);
 201                 dev->dev.power.saved_state = NULL;
 202         }
 203
 204         return 0;
 205 }
 206
 207 #else
 208 #define neponset_suspend NULL
 209 #define neponset_resume  NULL
 210 #endif
 211
 212 static struct platform_driver neponset_device_driver = {
 213         .probe          = neponset_probe,
 214         .suspend        = neponset_suspend,
 215         .resume         = neponset_resume,
 216         .driver         = {
 217                 .name   = "neponset",
 218         },
 219 };
 220
 221 static struct resource neponset_resources[] = {
 222         [0] = {
 223                 .start  = 0x10000000,
 224                 .end    = 0x17ffffff,
 225                 .flags  = IORESOURCE_MEM,
 226         },
 227 };
 228
 229 static struct platform_device neponset_device = {
 230         .name           = "neponset",
 231         .id             = 0,
 232         .num_resources  = ARRAY_SIZE(neponset_resources),
 233         .resource       = neponset_resources,
 234 };
 235
 236 static struct resource sa1111_resources[] = {
 237         [0] = {
 238                 .start  = 0x40000000,
 239                 .end    = 0x40001fff,
 240                 .flags  = IORESOURCE_MEM,
 241         },
 242         [1] = {
 243                 .start  = IRQ_NEPONSET_SA1111,
 244                 .end    = IRQ_NEPONSET_SA1111,
 245                 .flags  = IORESOURCE_IRQ,
 246         },
 247 };
 248
 249 static u64 sa1111_dmamask = 0xffffffffUL;
 250
 251 static struct platform_device sa1111_device = {
 252         .name           = "sa1111",
 253         .id             = 0,
 254         .dev            = {
 255                 .dma_mask = &sa1111_dmamask,
 256                 .coherent_dma_mask = 0xffffffff,
 257         },
 258         .num_resources  = ARRAY_SIZE(sa1111_resources),
 259         .resource       = sa1111_resources,
 260 };
 261
 262 static struct resource smc91x_resources[] = {
 263         [0] = {
 264                 .name   = "smc91x-regs",
 265                 .start  = SA1100_CS3_PHYS,
 266                 .end    = SA1100_CS3_PHYS + 0x01ffffff,
 267                 .flags  = IORESOURCE_MEM,
 268         },
 269         [1] = {
 270                 .start  = IRQ_NEPONSET_SMC9196,
 271                 .end    = IRQ_NEPONSET_SMC9196,
 272                 .flags  = IORESOURCE_IRQ,
 273         },
 274         [2] = {
 275                 .name   = "smc91x-attrib",
 276                 .start  = SA1100_CS3_PHYS + 0x02000000,
 277                 .end    = SA1100_CS3_PHYS + 0x03ffffff,
 278                 .flags  = IORESOURCE_MEM,
 279         },
 280 };
 281
 282 static struct platform_device smc91x_device = {
 283         .name           = "smc91x",
 284         .id             = 0,
 285         .num_resources  = ARRAY_SIZE(smc91x_resources),
 286         .resource       = smc91x_resources,
 287 };
 288
 289 static struct platform_device *devices[] __initdata = {
 290         &neponset_device,
 291         &sa1111_device,
 292         &smc91x_device,
 293 };
 294
 295 static int __init neponset_init(void)
 296 {
 297         platform_driver_register(&neponset_device_driver);
 298
 299         /*
 300          * The Neponset is only present on the Assabet machine type.
 301          */
 302         if (!machine_is_assabet())
 303                 return -ENODEV;
 304
 305         /*
 306          * Ensure that the memory bus request/grant signals are setup,
 307          * and the grant is held in its inactive state, whether or not
 308          * we actually have a Neponset attached.
 309          */
 310         sa1110_mb_disable();
 311
 312         if (!machine_has_neponset()) {
 313                 printk(KERN_DEBUG "Neponset expansion board not present\n");
 314                 return -ENODEV;
 315         }
 316
 317         if (WHOAMI != 0x11) {
 318                 printk(KERN_WARNING "Neponset board detected, but "
 319                         "wrong ID: %02x\n", WHOAMI);
 320                 return -ENODEV;
 321         }
 322
 323         return platform_add_devices(devices, ARRAY_SIZE(devices));
 324 }
 325
 326 subsys_initcall(neponset_init);
 327
 328 static struct map_desc neponset_io_desc[] __initdata = {
 329         {       /* System Registers */
 330                 .virtual        =  0xf3000000,
 331                 .pfn            = __phys_to_pfn(0x10000000),
 332                 .length         = SZ_1M,
 333                 .type           = MT_DEVICE
 334         }, {    /* SA-1111 */
 335                 .virtual        =  0xf4000000,
 336                 .pfn            = __phys_to_pfn(0x40000000),
 337                 .length         = SZ_1M,
 338                 .type           = MT_DEVICE
 339         }
 340 };
 341
 342 void __init neponset_map_io(void)
 343 {
 344         iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
 345 }