2 * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
4 * Written 1994-1999 by Avery Pennarun.
5 * Derived from skeleton.c by Donald Becker.
7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8 * for sponsoring the further development of this driver.
10 * **********************
12 * The original copyright of skeleton.c was as follows:
14 * skeleton.c Written 1993 by Donald Becker.
15 * Copyright 1993 United States Government as represented by the
16 * Director, National Security Agency. This software may only be used
17 * and distributed according to the terms of the GNU General Public License as
18 * modified by SRC, incorporated herein by reference.
20 * **********************
22 * For more details, see drivers/net/arcnet.c
24 * **********************
26 #include <linux/module.h>
27 #include <linux/init.h>
28 #include <linux/if_arp.h>
30 #include <linux/netdevice.h>
31 #include <linux/skbuff.h>
32 #include <linux/arcdevice.h>
34 #define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
37 static unsigned short type_trans(struct sk_buff *skb, struct net_device *dev);
38 static void rx(struct net_device *dev, int bufnum,
39 struct archdr *pkthdr, int length);
40 static int build_header(struct sk_buff *skb, struct net_device *dev,
41 unsigned short type, uint8_t daddr);
42 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
46 struct ArcProto rfc1051_proto =
49 .mtu = XMTU - RFC1051_HDR_SIZE,
51 .build_header = build_header,
52 .prepare_tx = prepare_tx,
56 static int __init arcnet_rfc1051_init(void)
60 arc_proto_map[ARC_P_IP_RFC1051]
61 = arc_proto_map[ARC_P_ARP_RFC1051]
64 /* if someone else already owns the broadcast, we won't take it */
65 if (arc_bcast_proto == arc_proto_default)
66 arc_bcast_proto = &rfc1051_proto;
71 static void __exit arcnet_rfc1051_exit(void)
73 arcnet_unregister_proto(&rfc1051_proto);
76 module_init(arcnet_rfc1051_init);
77 module_exit(arcnet_rfc1051_exit);
79 MODULE_LICENSE("GPL");
82 * Determine a packet's protocol ID.
84 * With ARCnet we have to convert everything to Ethernet-style stuff.
86 static unsigned short type_trans(struct sk_buff *skb, struct net_device *dev)
88 struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
89 struct archdr *pkt = (struct archdr *) skb->data;
90 struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
91 int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
93 /* Pull off the arcnet header. */
94 skb->mac.raw = skb->data;
95 skb_pull(skb, hdr_size);
97 if (pkt->hard.dest == 0)
98 skb->pkt_type = PACKET_BROADCAST;
99 else if (dev->flags & IFF_PROMISC) {
100 /* if we're not sending to ourselves :) */
101 if (pkt->hard.dest != dev->dev_addr[0])
102 skb->pkt_type = PACKET_OTHERHOST;
104 /* now return the protocol number */
105 switch (soft->proto) {
106 case ARC_P_IP_RFC1051:
107 return htons(ETH_P_IP);
108 case ARC_P_ARP_RFC1051:
109 return htons(ETH_P_ARP);
112 lp->stats.rx_errors++;
113 lp->stats.rx_crc_errors++;
117 return htons(ETH_P_IP);
121 /* packet receiver */
122 static void rx(struct net_device *dev, int bufnum,
123 struct archdr *pkthdr, int length)
125 struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
127 struct archdr *pkt = pkthdr;
130 BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
137 skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
139 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
140 lp->stats.rx_dropped++;
143 skb_put(skb, length + ARC_HDR_SIZE);
146 pkt = (struct archdr *) skb->data;
148 /* up to sizeof(pkt->soft) has already been copied from the card */
149 memcpy(pkt, pkthdr, sizeof(struct archdr));
150 if (length > sizeof(pkt->soft))
151 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
152 pkt->soft.raw + sizeof(pkt->soft),
153 length - sizeof(pkt->soft));
155 BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
157 skb->protocol = type_trans(skb, dev);
159 dev->last_rx = jiffies;
164 * Create the ARCnet hard/soft headers for RFC1051.
166 static int build_header(struct sk_buff *skb, struct net_device *dev,
167 unsigned short type, uint8_t daddr)
169 struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
170 int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
171 struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
172 struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
174 /* set the protocol ID according to RFC1051 */
177 soft->proto = ARC_P_IP_RFC1051;
180 soft->proto = ARC_P_ARP_RFC1051;
183 BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
185 lp->stats.tx_errors++;
186 lp->stats.tx_aborted_errors++;
192 * Set the source hardware address.
194 * This is pretty pointless for most purposes, but it can help in
195 * debugging. ARCnet does not allow us to change the source address in
196 * the actual packet sent)
198 pkt->hard.source = *dev->dev_addr;
200 /* see linux/net/ethernet/eth.c to see where I got the following */
202 if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
204 * FIXME: fill in the last byte of the dest ipaddr here to better
205 * comply with RFC1051 in "noarp" mode.
210 /* otherwise, just fill it in and go! */
211 pkt->hard.dest = daddr;
213 return hdr_size; /* success */
217 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
220 struct arcnet_local *lp = (struct arcnet_local *) dev->priv;
221 struct arc_hardware *hard = &pkt->hard;
224 BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
225 lp->next_tx, lp->cur_tx, bufnum);
227 length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
230 /* should never happen! other people already check for this. */
231 BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n",
235 if (length > MinTU) {
237 hard->offset[1] = ofs = 512 - length;
238 } else if (length > MTU) {
240 hard->offset[1] = ofs = 512 - length - 3;
242 hard->offset[0] = ofs = 256 - length;
244 lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
245 lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
247 lp->lastload_dest = hard->dest;