1 /* Driver for USB Mass Storage compliant devices
2 * Transport Functions Header File
4 * $Id: transport.h,v 1.18 2002/04/21 02:57:59 mdharm Exp $
6 * Current development and maintenance by:
7 * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
9 * This driver is based on the 'USB Mass Storage Class' document. This
10 * describes in detail the protocol used to communicate with such
11 * devices. Clearly, the designers had SCSI and ATAPI commands in
12 * mind when they created this document. The commands are all very
13 * similar to commands in the SCSI-II and ATAPI specifications.
15 * It is important to note that in a number of cases this class
16 * exhibits class-specific exemptions from the USB specification.
17 * Notably the usage of NAK, STALL and ACK differs from the norm, in
18 * that they are used to communicate wait, failed and OK on commands.
20 * Also, for certain devices, the interrupt endpoint is used to convey
21 * status of a command.
23 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
24 * information about this driver.
26 * This program is free software; you can redistribute it and/or modify it
27 * under the terms of the GNU General Public License as published by the
28 * Free Software Foundation; either version 2, or (at your option) any
31 * This program is distributed in the hope that it will be useful, but
32 * WITHOUT ANY WARRANTY; without even the implied warranty of
33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
34 * General Public License for more details.
36 * You should have received a copy of the GNU General Public License along
37 * with this program; if not, write to the Free Software Foundation, Inc.,
38 * 675 Mass Ave, Cambridge, MA 02139, USA.
44 #include <linux/config.h>
45 #include <linux/blkdev.h>
51 #define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
52 #define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
53 #define US_PR_BULK 0x50 /* bulk only */
54 #ifdef CONFIG_USB_STORAGE_HP8200e
55 #define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */
57 #ifdef CONFIG_USB_STORAGE_SDDR09
58 #define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
60 #ifdef CONFIG_USB_STORAGE_SDDR55
61 #define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
63 #define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
65 #ifdef CONFIG_USB_STORAGE_FREECOM
66 #define US_PR_FREECOM 0xf1 /* Freecom */
69 #ifdef CONFIG_USB_STORAGE_DATAFAB
70 #define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
73 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
74 #define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
77 #define US_PR_DEVICE 0xff /* Use device's value */
80 * Bulk only data structures
83 /* command block wrapper */
85 __u32 Signature; /* contains 'USBC' */
86 __u32 Tag; /* unique per command id */
87 __u32 DataTransferLength; /* size of data */
88 __u8 Flags; /* direction in bit 0 */
89 __u8 Lun; /* LUN normally 0 */
90 __u8 Length; /* of of the CDB */
91 __u8 CDB[16]; /* max command */
94 #define US_BULK_CB_WRAP_LEN 31
95 #define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
96 #define US_BULK_FLAG_IN 1
97 #define US_BULK_FLAG_OUT 0
99 /* command status wrapper */
100 struct bulk_cs_wrap {
101 __u32 Signature; /* should = 'USBS' */
102 __u32 Tag; /* same as original command */
103 __u32 Residue; /* amount not transferred */
104 __u8 Status; /* see below */
108 #define US_BULK_CS_WRAP_LEN 13
109 #define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
110 /* This is for Olympus Camedia digital cameras */
111 #define US_BULK_CS_OLYMPUS_SIGN 0x55425355 /* spells out 'USBU' */
112 #define US_BULK_STAT_OK 0
113 #define US_BULK_STAT_FAIL 1
114 #define US_BULK_STAT_PHASE 2
116 /* bulk-only class specific requests */
117 #define US_BULK_RESET_REQUEST 0xff
118 #define US_BULK_GET_MAX_LUN 0xfe
121 * usb_stor_bulk_transfer_xxx() return codes, in order of severity
124 #define USB_STOR_XFER_GOOD 0 /* good transfer */
125 #define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
126 #define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
127 #define USB_STOR_XFER_LONG 3 /* device tried to send too much */
128 #define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
131 * Transport return codes
134 #define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
135 #define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
136 #define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
137 #define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
140 * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
141 * return codes. But now the transport and low-level transfer routines
142 * treat an abort as just another error (-ENOENT for a cancelled URB).
143 * It is up to the invoke_transport() function to test for aborts and
144 * distinguish them from genuine communication errors.
148 * CBI accept device specific command
151 #define US_CBI_ADSC 0
153 extern int usb_stor_CBI_transport(Scsi_Cmnd*, struct us_data*);
155 extern int usb_stor_CB_transport(Scsi_Cmnd*, struct us_data*);
156 extern int usb_stor_CB_reset(struct us_data*);
158 extern int usb_stor_Bulk_transport(Scsi_Cmnd*, struct us_data*);
159 extern int usb_stor_Bulk_max_lun(struct us_data*);
160 extern int usb_stor_Bulk_reset(struct us_data*);
162 extern void usb_stor_invoke_transport(Scsi_Cmnd*, struct us_data*);
163 extern void usb_stor_stop_transport(struct us_data*);
165 extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
166 u8 request, u8 requesttype, u16 value, u16 index,
167 void *data, u16 size, int timeout);
168 extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
170 extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
171 u8 request, u8 requesttype, u16 value, u16 index,
172 void *data, u16 size);
173 extern int usb_stor_intr_transfer(struct us_data *us, void *buf,
174 unsigned int length);
175 extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
176 void *buf, unsigned int length, unsigned int *act_len);
177 extern int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
178 struct scatterlist *sg, int num_sg, unsigned int length,
179 unsigned int *act_len);
180 extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
181 void *buf, unsigned int length, int use_sg, int *residual);