2 * linux/fs/ext3/super.c
4 * Copyright (C) 1992, 1993, 1994, 1995
5 * Remy Card (card@masi.ibp.fr)
6 * Laboratoire MASI - Institut Blaise Pascal
7 * Universite Pierre et Marie Curie (Paris VI)
11 * linux/fs/minix/inode.c
13 * Copyright (C) 1991, 1992 Linus Torvalds
15 * Big-endian to little-endian byte-swapping/bitmaps by
16 * David S. Miller (davem@caip.rutgers.edu), 1995
19 #include <linux/config.h>
20 #include <linux/module.h>
21 #include <linux/string.h>
23 #include <linux/time.h>
24 #include <linux/jbd.h>
25 #include <linux/ext3_fs.h>
26 #include <linux/ext3_jbd.h>
27 #include <linux/slab.h>
28 #include <linux/init.h>
29 #include <linux/blkdev.h>
30 #include <linux/parser.h>
31 #include <linux/smp_lock.h>
32 #include <linux/buffer_head.h>
33 #include <linux/vfs.h>
34 #include <linux/random.h>
35 #include <linux/mount.h>
36 #include <linux/namei.h>
37 #include <linux/quotaops.h>
38 #include <asm/uaccess.h>
42 static int ext3_load_journal(struct super_block *, struct ext3_super_block *);
43 static int ext3_create_journal(struct super_block *, struct ext3_super_block *,
45 static void ext3_commit_super (struct super_block * sb,
46 struct ext3_super_block * es,
48 static void ext3_mark_recovery_complete(struct super_block * sb,
49 struct ext3_super_block * es);
50 static void ext3_clear_journal_err(struct super_block * sb,
51 struct ext3_super_block * es);
52 static int ext3_sync_fs(struct super_block *sb, int wait);
55 * Wrappers for journal_start/end.
57 * The only special thing we need to do here is to make sure that all
58 * journal_end calls result in the superblock being marked dirty, so
59 * that sync() will call the filesystem's write_super callback if
62 handle_t *ext3_journal_start(struct inode *inode, int nblocks)
66 if (inode->i_sb->s_flags & MS_RDONLY)
67 return ERR_PTR(-EROFS);
69 /* Special case here: if the journal has aborted behind our
70 * backs (eg. EIO in the commit thread), then we still need to
71 * take the FS itself readonly cleanly. */
72 journal = EXT3_JOURNAL(inode);
73 if (is_journal_aborted(journal)) {
74 ext3_abort(inode->i_sb, __FUNCTION__,
75 "Detected aborted journal");
76 return ERR_PTR(-EROFS);
79 return journal_start(journal, nblocks);
83 * The only special thing we need to do here is to make sure that all
84 * journal_stop calls result in the superblock being marked dirty, so
85 * that sync() will call the filesystem's write_super callback if
88 int __ext3_journal_stop(const char *where, handle_t *handle)
90 struct super_block *sb;
94 sb = handle->h_transaction->t_journal->j_private;
96 rc = journal_stop(handle);
101 __ext3_std_error(sb, where, err);
105 void ext3_journal_abort_handle(const char *caller, const char *err_fn,
106 struct buffer_head *bh, handle_t *handle, int err)
109 const char *errstr = ext3_decode_error(NULL, err, nbuf);
111 printk(KERN_ERR "%s: aborting transaction: %s in %s",
112 caller, errstr, err_fn);
115 BUFFER_TRACE(bh, "abort");
116 journal_abort_handle(handle);
121 static char error_buf[1024];
123 /* Deal with the reporting of failure conditions on a filesystem such as
124 * inconsistencies detected or read IO failures.
126 * On ext2, we can store the error state of the filesystem in the
127 * superblock. That is not possible on ext3, because we may have other
128 * write ordering constraints on the superblock which prevent us from
129 * writing it out straight away; and given that the journal is about to
130 * be aborted, we can't rely on the current, or future, transactions to
131 * write out the superblock safely.
133 * We'll just use the journal_abort() error code to record an error in
134 * the journal instead. On recovery, the journal will compain about
135 * that error until we've noted it down and cleared it.
138 static void ext3_handle_error(struct super_block *sb)
140 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
142 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
143 es->s_state |= cpu_to_le32(EXT3_ERROR_FS);
145 if (sb->s_flags & MS_RDONLY)
148 if (test_opt (sb, ERRORS_PANIC))
149 panic ("EXT3-fs (device %s): panic forced after error\n",
151 if (test_opt (sb, ERRORS_RO)) {
152 printk (KERN_CRIT "Remounting filesystem read-only\n");
153 sb->s_flags |= MS_RDONLY;
155 journal_t *journal = EXT3_SB(sb)->s_journal;
157 EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
159 journal_abort(journal, -EIO);
161 ext3_commit_super(sb, es, 1);
164 void ext3_error (struct super_block * sb, const char * function,
165 const char * fmt, ...)
169 va_start (args, fmt);
170 vsprintf (error_buf, fmt, args);
173 printk (KERN_CRIT "EXT3-fs error (device %s): %s: %s\n",
174 sb->s_id, function, error_buf);
176 ext3_handle_error(sb);
179 const char *ext3_decode_error(struct super_block * sb, int errno, char nbuf[16])
185 errstr = "IO failure";
188 errstr = "Out of memory";
191 if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT)
192 errstr = "Journal has aborted";
194 errstr = "Readonly filesystem";
197 /* If the caller passed in an extra buffer for unknown
198 * errors, textualise them now. Else we just return
201 /* Check for truncated error codes... */
202 if (snprintf(nbuf, 16, "error %d", -errno) >= 0)
211 /* __ext3_std_error decodes expected errors from journaling functions
212 * automatically and invokes the appropriate error response. */
214 void __ext3_std_error (struct super_block * sb, const char * function,
218 const char *errstr = ext3_decode_error(sb, errno, nbuf);
220 printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
221 sb->s_id, function, errstr);
223 ext3_handle_error(sb);
227 * ext3_abort is a much stronger failure handler than ext3_error. The
228 * abort function may be used to deal with unrecoverable failures such
229 * as journal IO errors or ENOMEM at a critical moment in log management.
231 * We unconditionally force the filesystem into an ABORT|READONLY state,
232 * unless the error response on the fs has been set to panic in which
233 * case we take the easy way out and panic immediately.
236 void ext3_abort (struct super_block * sb, const char * function,
237 const char * fmt, ...)
241 printk (KERN_CRIT "ext3_abort called.\n");
243 va_start (args, fmt);
244 vsprintf (error_buf, fmt, args);
247 if (test_opt (sb, ERRORS_PANIC))
248 panic ("EXT3-fs panic (device %s): %s: %s\n",
249 sb->s_id, function, error_buf);
251 printk (KERN_CRIT "EXT3-fs abort (device %s): %s: %s\n",
252 sb->s_id, function, error_buf);
254 if (sb->s_flags & MS_RDONLY)
257 printk (KERN_CRIT "Remounting filesystem read-only\n");
258 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
259 sb->s_flags |= MS_RDONLY;
260 EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
261 journal_abort(EXT3_SB(sb)->s_journal, -EIO);
264 /* Deal with the reporting of failure conditions while running, such as
265 * inconsistencies in operation or invalid system states.
267 * Use ext3_error() for cases of invalid filesystem states, as that will
268 * record an error on disk and force a filesystem check on the next boot.
270 NORET_TYPE void ext3_panic (struct super_block * sb, const char * function,
271 const char * fmt, ...)
275 va_start (args, fmt);
276 vsprintf (error_buf, fmt, args);
279 /* this is to prevent panic from syncing this filesystem */
280 /* AKPM: is this sufficient? */
281 sb->s_flags |= MS_RDONLY;
282 panic ("EXT3-fs panic (device %s): %s: %s\n",
283 sb->s_id, function, error_buf);
286 void ext3_warning (struct super_block * sb, const char * function,
287 const char * fmt, ...)
291 va_start (args, fmt);
292 vsprintf (error_buf, fmt, args);
294 printk (KERN_WARNING "EXT3-fs warning (device %s): %s: %s\n",
295 sb->s_id, function, error_buf);
298 void ext3_update_dynamic_rev(struct super_block *sb)
300 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
302 if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
305 ext3_warning(sb, __FUNCTION__,
306 "updating to rev %d because of new feature flag, "
307 "running e2fsck is recommended",
310 es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
311 es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
312 es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV);
313 /* leave es->s_feature_*compat flags alone */
314 /* es->s_uuid will be set by e2fsck if empty */
317 * The rest of the superblock fields should be zero, and if not it
318 * means they are likely already in use, so leave them alone. We
319 * can leave it up to e2fsck to clean up any inconsistencies there.
324 * Open the external journal device
326 static struct block_device *ext3_blkdev_get(dev_t dev)
328 struct block_device *bdev;
329 char b[BDEVNAME_SIZE];
331 bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE);
337 printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n",
338 __bdevname(dev, b), PTR_ERR(bdev));
343 * Release the journal device
345 static int ext3_blkdev_put(struct block_device *bdev)
348 return blkdev_put(bdev);
351 static int ext3_blkdev_remove(struct ext3_sb_info *sbi)
353 struct block_device *bdev;
356 bdev = sbi->journal_bdev;
358 ret = ext3_blkdev_put(bdev);
359 sbi->journal_bdev = 0;
364 static inline struct inode *orphan_list_entry(struct list_head *l)
366 return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode;
369 static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi)
373 printk(KERN_ERR "sb orphan head is %d\n",
374 le32_to_cpu(sbi->s_es->s_last_orphan));
376 printk(KERN_ERR "sb_info orphan list:\n");
377 list_for_each(l, &sbi->s_orphan) {
378 struct inode *inode = orphan_list_entry(l);
380 "inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
381 inode->i_sb->s_id, inode->i_ino, inode,
382 inode->i_mode, inode->i_nlink,
383 le32_to_cpu(NEXT_ORPHAN(inode)));
387 void ext3_put_super (struct super_block * sb)
389 struct ext3_sb_info *sbi = EXT3_SB(sb);
390 struct ext3_super_block *es = sbi->s_es;
393 ext3_xattr_put_super(sb);
394 journal_destroy(sbi->s_journal);
395 if (!(sb->s_flags & MS_RDONLY)) {
396 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
397 es->s_state = le16_to_cpu(sbi->s_mount_state);
398 BUFFER_TRACE(sbi->s_sbh, "marking dirty");
399 mark_buffer_dirty(sbi->s_sbh);
400 ext3_commit_super(sb, es, 1);
403 for (i = 0; i < sbi->s_gdb_count; i++)
404 brelse(sbi->s_group_desc[i]);
405 kfree(sbi->s_group_desc);
409 for (i = 0; i < MAXQUOTAS; i++) {
410 if (sbi->s_qf_names[i])
411 kfree(sbi->s_qf_names[i]);
415 /* Debugging code just in case the in-memory inode orphan list
416 * isn't empty. The on-disk one can be non-empty if we've
417 * detected an error and taken the fs readonly, but the
418 * in-memory list had better be clean by this point. */
419 if (!list_empty(&sbi->s_orphan))
420 dump_orphan_list(sb, sbi);
421 J_ASSERT(list_empty(&sbi->s_orphan));
423 invalidate_bdev(sb->s_bdev, 0);
424 if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
426 * Invalidate the journal device's buffers. We don't want them
427 * floating about in memory - the physical journal device may
428 * hotswapped, and it breaks the `ro-after' testing code.
430 sync_blockdev(sbi->journal_bdev);
431 invalidate_bdev(sbi->journal_bdev, 0);
432 ext3_blkdev_remove(sbi);
434 sb->s_fs_info = NULL;
439 static kmem_cache_t *ext3_inode_cachep;
442 * Called inside transaction, so use GFP_NOFS
444 static struct inode *ext3_alloc_inode(struct super_block *sb)
446 struct ext3_inode_info *ei;
448 ei = kmem_cache_alloc(ext3_inode_cachep, SLAB_NOFS);
451 #ifdef CONFIG_EXT3_FS_POSIX_ACL
452 ei->i_acl = EXT3_ACL_NOT_CACHED;
453 ei->i_default_acl = EXT3_ACL_NOT_CACHED;
455 ei->vfs_inode.i_version = 1;
456 return &ei->vfs_inode;
459 static void ext3_destroy_inode(struct inode *inode)
461 kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
464 static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
466 struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
468 if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
469 SLAB_CTOR_CONSTRUCTOR) {
470 INIT_LIST_HEAD(&ei->i_orphan);
471 #ifdef CONFIG_EXT3_FS_XATTR
472 init_rwsem(&ei->xattr_sem);
474 init_MUTEX(&ei->truncate_sem);
475 inode_init_once(&ei->vfs_inode);
479 static int init_inodecache(void)
481 ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
482 sizeof(struct ext3_inode_info),
483 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
485 if (ext3_inode_cachep == NULL)
490 static void destroy_inodecache(void)
492 if (kmem_cache_destroy(ext3_inode_cachep))
493 printk(KERN_INFO "ext3_inode_cache: not all structures were freed\n");
496 #ifdef CONFIG_EXT3_FS_POSIX_ACL
498 static void ext3_clear_inode(struct inode *inode)
500 if (EXT3_I(inode)->i_acl &&
501 EXT3_I(inode)->i_acl != EXT3_ACL_NOT_CACHED) {
502 posix_acl_release(EXT3_I(inode)->i_acl);
503 EXT3_I(inode)->i_acl = EXT3_ACL_NOT_CACHED;
505 if (EXT3_I(inode)->i_default_acl &&
506 EXT3_I(inode)->i_default_acl != EXT3_ACL_NOT_CACHED) {
507 posix_acl_release(EXT3_I(inode)->i_default_acl);
508 EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED;
513 # define ext3_clear_inode NULL
518 #define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
519 #define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
521 static int ext3_dquot_initialize(struct inode *inode, int type);
522 static int ext3_dquot_drop(struct inode *inode);
523 static int ext3_write_dquot(struct dquot *dquot);
524 static int ext3_mark_dquot_dirty(struct dquot *dquot);
525 static int ext3_write_info(struct super_block *sb, int type);
526 static int ext3_quota_on(struct super_block *sb, int type, int format_id, char *path);
527 static int ext3_quota_on_mount(struct super_block *sb, int type);
528 static int ext3_quota_off_mount(struct super_block *sb, int type);
530 static struct dquot_operations ext3_quota_operations = {
531 .initialize = ext3_dquot_initialize,
532 .drop = ext3_dquot_drop,
533 .alloc_space = dquot_alloc_space,
534 .alloc_inode = dquot_alloc_inode,
535 .free_space = dquot_free_space,
536 .free_inode = dquot_free_inode,
537 .transfer = dquot_transfer,
538 .write_dquot = ext3_write_dquot,
539 .mark_dirty = ext3_mark_dquot_dirty,
540 .write_info = ext3_write_info
543 static struct quotactl_ops ext3_qctl_operations = {
544 .quota_on = ext3_quota_on,
545 .quota_off = vfs_quota_off,
546 .quota_sync = vfs_quota_sync,
547 .get_info = vfs_get_dqinfo,
548 .set_info = vfs_set_dqinfo,
549 .get_dqblk = vfs_get_dqblk,
550 .set_dqblk = vfs_set_dqblk
554 static struct super_operations ext3_sops = {
555 .alloc_inode = ext3_alloc_inode,
556 .destroy_inode = ext3_destroy_inode,
557 .read_inode = ext3_read_inode,
558 .write_inode = ext3_write_inode,
559 .dirty_inode = ext3_dirty_inode,
560 .put_inode = ext3_put_inode,
561 .delete_inode = ext3_delete_inode,
562 .put_super = ext3_put_super,
563 .write_super = ext3_write_super,
564 .sync_fs = ext3_sync_fs,
565 .write_super_lockfs = ext3_write_super_lockfs,
566 .unlockfs = ext3_unlockfs,
567 .statfs = ext3_statfs,
568 .remount_fs = ext3_remount,
569 .clear_inode = ext3_clear_inode,
572 struct dentry *ext3_get_parent(struct dentry *child);
573 static struct export_operations ext3_export_ops = {
574 .get_parent = ext3_get_parent,
578 Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
579 Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro,
580 Opt_nouid32, Opt_check, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov,
581 Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, Opt_noload,
582 Opt_commit, Opt_journal_update, Opt_journal_inum,
583 Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
584 Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
585 Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0,
586 Opt_tagxid, Opt_ignore, Opt_err,
589 static match_table_t tokens = {
590 {Opt_bsd_df, "bsddf"},
591 {Opt_minix_df, "minixdf"},
592 {Opt_grpid, "grpid"},
593 {Opt_grpid, "bsdgroups"},
594 {Opt_nogrpid, "nogrpid"},
595 {Opt_nogrpid, "sysvgroups"},
596 {Opt_resgid, "resgid=%u"},
597 {Opt_resuid, "resuid=%u"},
599 {Opt_err_cont, "errors=continue"},
600 {Opt_err_panic, "errors=panic"},
601 {Opt_err_ro, "errors=remount-ro"},
602 {Opt_nouid32, "nouid32"},
603 {Opt_nocheck, "nocheck"},
604 {Opt_nocheck, "check=none"},
605 {Opt_check, "check"},
606 {Opt_debug, "debug"},
607 {Opt_oldalloc, "oldalloc"},
608 {Opt_orlov, "orlov"},
609 {Opt_user_xattr, "user_xattr"},
610 {Opt_nouser_xattr, "nouser_xattr"},
612 {Opt_noacl, "noacl"},
613 {Opt_noload, "noload"},
614 {Opt_commit, "commit=%u"},
615 {Opt_journal_update, "journal=update"},
616 {Opt_journal_inum, "journal=%u"},
617 {Opt_abort, "abort"},
618 {Opt_data_journal, "data=journal"},
619 {Opt_data_ordered, "data=ordered"},
620 {Opt_data_writeback, "data=writeback"},
621 {Opt_offusrjquota, "usrjquota="},
622 {Opt_usrjquota, "usrjquota=%s"},
623 {Opt_offgrpjquota, "grpjquota="},
624 {Opt_grpjquota, "grpjquota=%s"},
625 {Opt_jqfmt_vfsold, "jqfmt=vfsold"},
626 {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
627 {Opt_tagxid, "tagxid"},
628 {Opt_ignore, "grpquota"},
629 {Opt_ignore, "noquota"},
630 {Opt_ignore, "quota"},
631 {Opt_ignore, "usrquota"},
635 static unsigned long get_sb_block(void **data)
637 unsigned long sb_block;
638 char *options = (char *) *data;
640 if (!options || strncmp(options, "sb=", 3) != 0)
641 return 1; /* Default location */
643 sb_block = simple_strtoul(options, &options, 0);
644 if (*options && *options != ',') {
645 printk("EXT3-fs: Invalid sb specification: %s\n",
651 *data = (void *) options;
655 static int parse_options (char * options, struct super_block *sb,
656 unsigned long * inum, int is_remount)
658 struct ext3_sb_info *sbi = EXT3_SB(sb);
660 substring_t args[MAX_OPT_ARGS];
670 while ((p = strsep (&options, ",")) != NULL) {
675 token = match_token(p, tokens, args);
678 clear_opt (sbi->s_mount_opt, MINIX_DF);
681 set_opt (sbi->s_mount_opt, MINIX_DF);
684 set_opt (sbi->s_mount_opt, GRPID);
687 clear_opt (sbi->s_mount_opt, GRPID);
690 if (match_int(&args[0], &option))
692 sbi->s_resuid = option;
695 if (match_int(&args[0], &option))
697 sbi->s_resgid = option;
700 /* handled by get_sb_block() instead of here */
701 /* *sb_block = match_int(&args[0]); */
704 clear_opt (sbi->s_mount_opt, ERRORS_CONT);
705 clear_opt (sbi->s_mount_opt, ERRORS_RO);
706 set_opt (sbi->s_mount_opt, ERRORS_PANIC);
709 clear_opt (sbi->s_mount_opt, ERRORS_CONT);
710 clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
711 set_opt (sbi->s_mount_opt, ERRORS_RO);
714 clear_opt (sbi->s_mount_opt, ERRORS_RO);
715 clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
716 set_opt (sbi->s_mount_opt, ERRORS_CONT);
719 set_opt (sbi->s_mount_opt, NO_UID32);
721 #ifndef CONFIG_INOXID_NONE
723 set_opt (sbi->s_mount_opt, TAG_XID);
727 #ifdef CONFIG_EXT3_CHECK
728 set_opt (sbi->s_mount_opt, CHECK);
731 "EXT3 Check option not supported\n");
735 clear_opt (sbi->s_mount_opt, CHECK);
738 set_opt (sbi->s_mount_opt, DEBUG);
741 set_opt (sbi->s_mount_opt, OLDALLOC);
744 clear_opt (sbi->s_mount_opt, OLDALLOC);
746 #ifdef CONFIG_EXT3_FS_XATTR
748 set_opt (sbi->s_mount_opt, XATTR_USER);
750 case Opt_nouser_xattr:
751 clear_opt (sbi->s_mount_opt, XATTR_USER);
755 case Opt_nouser_xattr:
756 printk("EXT3 (no)user_xattr options not supported\n");
759 #ifdef CONFIG_EXT3_FS_POSIX_ACL
761 set_opt(sbi->s_mount_opt, POSIX_ACL);
764 clear_opt(sbi->s_mount_opt, POSIX_ACL);
769 printk("EXT3 (no)acl options not supported\n");
772 case Opt_journal_update:
774 /* Eventually we will want to be able to create
775 a journal file here. For now, only allow the
776 user to specify an existing inode to be the
779 printk(KERN_ERR "EXT3-fs: cannot specify "
780 "journal on remount\n");
783 set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
785 case Opt_journal_inum:
787 printk(KERN_ERR "EXT3-fs: cannot specify "
788 "journal on remount\n");
791 if (match_int(&args[0], &option))
796 set_opt (sbi->s_mount_opt, NOLOAD);
799 if (match_int(&args[0], &option))
804 option = JBD_DEFAULT_MAX_COMMIT_AGE;
805 sbi->s_commit_interval = HZ * option;
807 case Opt_data_journal:
808 data_opt = EXT3_MOUNT_JOURNAL_DATA;
810 case Opt_data_ordered:
811 data_opt = EXT3_MOUNT_ORDERED_DATA;
813 case Opt_data_writeback:
814 data_opt = EXT3_MOUNT_WRITEBACK_DATA;
817 if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
820 "EXT3-fs: cannot change data "
821 "mode on remount\n");
825 sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
826 sbi->s_mount_opt |= data_opt;
836 if (sb_any_quota_enabled(sb)) {
838 "EXT3-fs: Cannot change journalled "
839 "quota options when quota turned on.\n");
842 if (sbi->s_qf_names[qtype]) {
844 "EXT3-fs: %s quota file already "
845 "specified.\n", QTYPE2NAME(qtype));
848 sbi->s_qf_names[qtype] = match_strdup(&args[0]);
849 if (!sbi->s_qf_names[qtype]) {
851 "EXT3-fs: not enough memory for "
852 "storing quotafile name.\n");
855 if (strchr(sbi->s_qf_names[qtype], '/')) {
857 "EXT3-fs: quotafile must be on "
858 "filesystem root.\n");
859 kfree(sbi->s_qf_names[qtype]);
860 sbi->s_qf_names[qtype] = NULL;
864 case Opt_offusrjquota:
867 case Opt_offgrpjquota:
870 if (sb_any_quota_enabled(sb)) {
871 printk(KERN_ERR "EXT3-fs: Cannot change "
872 "journalled quota options when "
873 "quota turned on.\n");
876 if (sbi->s_qf_names[qtype]) {
877 kfree(sbi->s_qf_names[qtype]);
878 sbi->s_qf_names[qtype] = NULL;
881 case Opt_jqfmt_vfsold:
882 sbi->s_jquota_fmt = QFMT_VFS_OLD;
884 case Opt_jqfmt_vfsv0:
885 sbi->s_jquota_fmt = QFMT_VFS_V0;
890 case Opt_offusrjquota:
891 case Opt_offgrpjquota:
892 case Opt_jqfmt_vfsold:
893 case Opt_jqfmt_vfsv0:
895 "EXT3-fs: journalled quota options not "
900 set_opt(sbi->s_mount_opt, ABORT);
906 "EXT3-fs: Unrecognized mount option \"%s\" "
907 "or missing value\n", p);
912 if (!sbi->s_jquota_fmt && (sbi->s_qf_names[USRQUOTA] ||
913 sbi->s_qf_names[GRPQUOTA])) {
915 "EXT3-fs: journalled quota format not specified.\n");
923 static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
926 struct ext3_sb_info *sbi = EXT3_SB(sb);
929 if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
930 printk (KERN_ERR "EXT3-fs warning: revision level too high, "
931 "forcing read-only mode\n");
936 if (!(sbi->s_mount_state & EXT3_VALID_FS))
937 printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
938 "running e2fsck is recommended\n");
939 else if ((sbi->s_mount_state & EXT3_ERROR_FS))
941 "EXT3-fs warning: mounting fs with errors, "
942 "running e2fsck is recommended\n");
943 else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
944 le16_to_cpu(es->s_mnt_count) >=
945 (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
947 "EXT3-fs warning: maximal mount count reached, "
948 "running e2fsck is recommended\n");
949 else if (le32_to_cpu(es->s_checkinterval) &&
950 (le32_to_cpu(es->s_lastcheck) +
951 le32_to_cpu(es->s_checkinterval) <= get_seconds()))
953 "EXT3-fs warning: checktime reached, "
954 "running e2fsck is recommended\n");
956 /* @@@ We _will_ want to clear the valid bit if we find
957 inconsistencies, to force a fsck at reboot. But for
958 a plain journaled filesystem we can keep it set as
960 es->s_state = cpu_to_le16(le16_to_cpu(es->s_state) & ~EXT3_VALID_FS);
962 if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
963 es->s_max_mnt_count =
964 (__s16) cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
965 es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1);
966 es->s_mtime = cpu_to_le32(get_seconds());
967 ext3_update_dynamic_rev(sb);
968 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
970 ext3_commit_super(sb, es, 1);
971 if (test_opt(sb, DEBUG))
972 printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, "
973 "bpg=%lu, ipg=%lu, mo=%04lx]\n",
976 EXT3_BLOCKS_PER_GROUP(sb),
977 EXT3_INODES_PER_GROUP(sb),
980 printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id);
981 if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
982 char b[BDEVNAME_SIZE];
984 printk("external journal on %s\n",
985 bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
987 printk("internal journal\n");
989 #ifdef CONFIG_EXT3_CHECK
990 if (test_opt (sb, CHECK)) {
991 ext3_check_blocks_bitmap (sb);
992 ext3_check_inodes_bitmap (sb);
998 static int ext3_check_descriptors (struct super_block * sb)
1000 struct ext3_sb_info *sbi = EXT3_SB(sb);
1001 unsigned long block = le32_to_cpu(sbi->s_es->s_first_data_block);
1002 struct ext3_group_desc * gdp = NULL;
1006 ext3_debug ("Checking group descriptors");
1008 for (i = 0; i < sbi->s_groups_count; i++)
1010 if ((i % EXT3_DESC_PER_BLOCK(sb)) == 0)
1011 gdp = (struct ext3_group_desc *)
1012 sbi->s_group_desc[desc_block++]->b_data;
1013 if (le32_to_cpu(gdp->bg_block_bitmap) < block ||
1014 le32_to_cpu(gdp->bg_block_bitmap) >=
1015 block + EXT3_BLOCKS_PER_GROUP(sb))
1017 ext3_error (sb, "ext3_check_descriptors",
1018 "Block bitmap for group %d"
1019 " not in group (block %lu)!",
1021 le32_to_cpu(gdp->bg_block_bitmap));
1024 if (le32_to_cpu(gdp->bg_inode_bitmap) < block ||
1025 le32_to_cpu(gdp->bg_inode_bitmap) >=
1026 block + EXT3_BLOCKS_PER_GROUP(sb))
1028 ext3_error (sb, "ext3_check_descriptors",
1029 "Inode bitmap for group %d"
1030 " not in group (block %lu)!",
1032 le32_to_cpu(gdp->bg_inode_bitmap));
1035 if (le32_to_cpu(gdp->bg_inode_table) < block ||
1036 le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >=
1037 block + EXT3_BLOCKS_PER_GROUP(sb))
1039 ext3_error (sb, "ext3_check_descriptors",
1040 "Inode table for group %d"
1041 " not in group (block %lu)!",
1043 le32_to_cpu(gdp->bg_inode_table));
1046 block += EXT3_BLOCKS_PER_GROUP(sb);
1050 sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb));
1051 sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb));
1056 /* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at
1057 * the superblock) which were deleted from all directories, but held open by
1058 * a process at the time of a crash. We walk the list and try to delete these
1059 * inodes at recovery time (only with a read-write filesystem).
1061 * In order to keep the orphan inode chain consistent during traversal (in
1062 * case of crash during recovery), we link each inode into the superblock
1063 * orphan list_head and handle it the same way as an inode deletion during
1064 * normal operation (which journals the operations for us).
1066 * We only do an iget() and an iput() on each inode, which is very safe if we
1067 * accidentally point at an in-use or already deleted inode. The worst that
1068 * can happen in this case is that we get a "bit already cleared" message from
1069 * ext3_free_inode(). The only reason we would point at a wrong inode is if
1070 * e2fsck was run on this filesystem, and it must have already done the orphan
1071 * inode cleanup for us, so we can safely abort without any further action.
1073 static void ext3_orphan_cleanup (struct super_block * sb,
1074 struct ext3_super_block * es)
1076 unsigned int s_flags = sb->s_flags;
1077 int nr_orphans = 0, nr_truncates = 0;
1081 if (!es->s_last_orphan) {
1082 jbd_debug(4, "no orphan inodes to clean up\n");
1086 if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) {
1087 if (es->s_last_orphan)
1088 jbd_debug(1, "Errors on filesystem, "
1089 "clearing orphan list.\n");
1090 es->s_last_orphan = 0;
1091 jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
1095 if (s_flags & MS_RDONLY) {
1096 printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n",
1098 sb->s_flags &= ~MS_RDONLY;
1101 /* Needed for iput() to work correctly and not trash data */
1102 sb->s_flags |= MS_ACTIVE;
1103 /* Turn on quotas so that they are updated correctly */
1104 for (i = 0; i < MAXQUOTAS; i++) {
1105 if (EXT3_SB(sb)->s_qf_names[i]) {
1106 int ret = ext3_quota_on_mount(sb, i);
1109 "EXT3-fs: Cannot turn on journalled "
1110 "quota: error %d\n", ret);
1115 while (es->s_last_orphan) {
1116 struct inode *inode;
1119 ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)))) {
1120 es->s_last_orphan = 0;
1124 list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
1126 if (inode->i_nlink) {
1128 "%s: truncating inode %ld to %Ld bytes\n",
1129 __FUNCTION__, inode->i_ino, inode->i_size);
1130 jbd_debug(2, "truncating inode %ld to %Ld bytes\n",
1131 inode->i_ino, inode->i_size);
1132 ext3_truncate(inode);
1136 "%s: deleting unreferenced inode %ld\n",
1137 __FUNCTION__, inode->i_ino);
1138 jbd_debug(2, "deleting unreferenced inode %ld\n",
1142 iput(inode); /* The delete magic happens here! */
1145 #define PLURAL(x) (x), ((x)==1) ? "" : "s"
1148 printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n",
1149 sb->s_id, PLURAL(nr_orphans));
1151 printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n",
1152 sb->s_id, PLURAL(nr_truncates));
1154 /* Turn quotas off */
1155 for (i = 0; i < MAXQUOTAS; i++) {
1156 if (sb_dqopt(sb)->files[i])
1157 ext3_quota_off_mount(sb, i);
1160 sb->s_flags = s_flags; /* Restore MS_RDONLY status */
1163 #define log2(n) ffz(~(n))
1166 * Maximal file size. There is a direct, and {,double-,triple-}indirect
1167 * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
1168 * We need to be 1 filesystem block less than the 2^32 sector limit.
1170 static loff_t ext3_max_size(int bits)
1172 loff_t res = EXT3_NDIR_BLOCKS;
1173 res += 1LL << (bits-2);
1174 res += 1LL << (2*(bits-2));
1175 res += 1LL << (3*(bits-2));
1177 if (res > (512LL << 32) - (1 << bits))
1178 res = (512LL << 32) - (1 << bits);
1182 static unsigned long descriptor_loc(struct super_block *sb,
1183 unsigned long logic_sb_block,
1186 struct ext3_sb_info *sbi = EXT3_SB(sb);
1187 unsigned long bg, first_data_block, first_meta_bg;
1190 first_data_block = le32_to_cpu(sbi->s_es->s_first_data_block);
1191 first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
1193 if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) ||
1195 return (logic_sb_block + nr + 1);
1196 bg = sbi->s_desc_per_block * nr;
1197 if (ext3_bg_has_super(sb, bg))
1199 return (first_data_block + has_super + (bg * sbi->s_blocks_per_group));
1203 static int ext3_fill_super (struct super_block *sb, void *data, int silent)
1205 struct buffer_head * bh;
1206 struct ext3_super_block *es = 0;
1207 struct ext3_sb_info *sbi;
1208 unsigned long block;
1209 unsigned long sb_block = get_sb_block(&data);
1210 unsigned long logic_sb_block;
1211 unsigned long offset = 0;
1212 unsigned long journal_inum = 0;
1213 unsigned long def_mount_opts;
1221 sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
1224 sb->s_fs_info = sbi;
1225 memset(sbi, 0, sizeof(*sbi));
1226 sbi->s_mount_opt = 0;
1227 sbi->s_resuid = EXT3_DEF_RESUID;
1228 sbi->s_resgid = EXT3_DEF_RESGID;
1230 blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
1232 printk(KERN_ERR "EXT3-fs: unable to set blocksize\n");
1237 * The ext3 superblock will not be buffer aligned for other than 1kB
1238 * block sizes. We need to calculate the offset from buffer start.
1240 if (blocksize != EXT3_MIN_BLOCK_SIZE) {
1241 logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
1242 offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
1244 logic_sb_block = sb_block;
1247 if (!(bh = sb_bread(sb, logic_sb_block))) {
1248 printk (KERN_ERR "EXT3-fs: unable to read superblock\n");
1252 * Note: s_es must be initialized as soon as possible because
1253 * some ext3 macro-instructions depend on its value
1255 es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
1257 sb->s_magic = le16_to_cpu(es->s_magic);
1258 if (sb->s_magic != EXT3_SUPER_MAGIC) {
1261 "VFS: Can't find ext3 filesystem on dev %s.\n",
1266 /* Set defaults before we parse the mount options */
1267 def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
1268 if (def_mount_opts & EXT3_DEFM_DEBUG)
1269 set_opt(sbi->s_mount_opt, DEBUG);
1270 if (def_mount_opts & EXT3_DEFM_BSDGROUPS)
1271 set_opt(sbi->s_mount_opt, GRPID);
1272 if (def_mount_opts & EXT3_DEFM_UID16)
1273 set_opt(sbi->s_mount_opt, NO_UID32);
1274 if (def_mount_opts & EXT3_DEFM_XATTR_USER)
1275 set_opt(sbi->s_mount_opt, XATTR_USER);
1276 if (def_mount_opts & EXT3_DEFM_ACL)
1277 set_opt(sbi->s_mount_opt, POSIX_ACL);
1278 if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA)
1279 sbi->s_mount_opt |= EXT3_MOUNT_JOURNAL_DATA;
1280 else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED)
1281 sbi->s_mount_opt |= EXT3_MOUNT_ORDERED_DATA;
1282 else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK)
1283 sbi->s_mount_opt |= EXT3_MOUNT_WRITEBACK_DATA;
1285 if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC)
1286 set_opt(sbi->s_mount_opt, ERRORS_PANIC);
1287 else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_RO)
1288 set_opt(sbi->s_mount_opt, ERRORS_RO);
1290 sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
1291 sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
1293 if (!parse_options ((char *) data, sb, &journal_inum, 0))
1296 if (EXT3_SB(sb)->s_mount_opt & EXT3_MOUNT_TAG_XID)
1297 sb->s_flags |= MS_TAGXID;
1298 sb->s_flags |= MS_ONE_SECOND;
1299 sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
1300 ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
1302 if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV &&
1303 (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
1304 EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
1305 EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
1307 "EXT3-fs warning: feature flags set on rev 0 fs, "
1308 "running e2fsck is recommended\n");
1310 * Check feature flags regardless of the revision level, since we
1311 * previously didn't change the revision level when setting the flags,
1312 * so there is a chance incompat flags are set on a rev 0 filesystem.
1314 if ((i = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP))) {
1315 printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
1316 "unsupported optional features (%x).\n",
1320 if (!(sb->s_flags & MS_RDONLY) &&
1321 (i = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP))){
1322 printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
1323 "unsupported optional features (%x).\n",
1327 blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
1329 if (blocksize < EXT3_MIN_BLOCK_SIZE ||
1330 blocksize > EXT3_MAX_BLOCK_SIZE) {
1332 "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
1333 blocksize, sb->s_id);
1337 hblock = bdev_hardsect_size(sb->s_bdev);
1338 if (sb->s_blocksize != blocksize) {
1340 * Make sure the blocksize for the filesystem is larger
1341 * than the hardware sectorsize for the machine.
1343 if (blocksize < hblock) {
1344 printk(KERN_ERR "EXT3-fs: blocksize %d too small for "
1345 "device blocksize %d.\n", blocksize, hblock);
1350 sb_set_blocksize(sb, blocksize);
1351 logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
1352 offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
1353 bh = sb_bread(sb, logic_sb_block);
1356 "EXT3-fs: Can't read superblock on 2nd try.\n");
1359 es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
1361 if (es->s_magic != le16_to_cpu(EXT3_SUPER_MAGIC)) {
1363 "EXT3-fs: Magic mismatch, very weird !\n");
1368 sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits);
1370 if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) {
1371 sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE;
1372 sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO;
1374 sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
1375 sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
1376 if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
1377 (sbi->s_inode_size & (sbi->s_inode_size - 1)) ||
1378 (sbi->s_inode_size > blocksize)) {
1380 "EXT3-fs: unsupported inode size: %d\n",
1385 sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
1386 le32_to_cpu(es->s_log_frag_size);
1387 if (blocksize != sbi->s_frag_size) {
1389 "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
1390 sbi->s_frag_size, blocksize);
1393 sbi->s_frags_per_block = 1;
1394 sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
1395 sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group);
1396 sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
1397 sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb);
1398 sbi->s_itb_per_group = sbi->s_inodes_per_group /sbi->s_inodes_per_block;
1399 sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc);
1401 sbi->s_mount_state = le16_to_cpu(es->s_state);
1402 sbi->s_addr_per_block_bits = log2(EXT3_ADDR_PER_BLOCK(sb));
1403 sbi->s_desc_per_block_bits = log2(EXT3_DESC_PER_BLOCK(sb));
1404 for (i=0; i < 4; i++)
1405 sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
1406 sbi->s_def_hash_version = es->s_def_hash_version;
1408 if (sbi->s_blocks_per_group > blocksize * 8) {
1410 "EXT3-fs: #blocks per group too big: %lu\n",
1411 sbi->s_blocks_per_group);
1414 if (sbi->s_frags_per_group > blocksize * 8) {
1416 "EXT3-fs: #fragments per group too big: %lu\n",
1417 sbi->s_frags_per_group);
1420 if (sbi->s_inodes_per_group > blocksize * 8) {
1422 "EXT3-fs: #inodes per group too big: %lu\n",
1423 sbi->s_inodes_per_group);
1427 sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
1428 le32_to_cpu(es->s_first_data_block) +
1429 EXT3_BLOCKS_PER_GROUP(sb) - 1) /
1430 EXT3_BLOCKS_PER_GROUP(sb);
1431 db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
1432 EXT3_DESC_PER_BLOCK(sb);
1433 sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
1435 if (sbi->s_group_desc == NULL) {
1436 printk (KERN_ERR "EXT3-fs: not enough memory\n");
1439 sbi->s_debts = kmalloc(sbi->s_groups_count * sizeof(u8),
1441 if (!sbi->s_debts) {
1442 printk("EXT3-fs: not enough memory to allocate s_bgi\n");
1445 memset(sbi->s_debts, 0, sbi->s_groups_count * sizeof(u8));
1447 percpu_counter_init(&sbi->s_freeblocks_counter);
1448 percpu_counter_init(&sbi->s_freeinodes_counter);
1449 percpu_counter_init(&sbi->s_dirs_counter);
1450 bgl_lock_init(&sbi->s_blockgroup_lock);
1452 for (i = 0; i < db_count; i++) {
1453 block = descriptor_loc(sb, logic_sb_block, i);
1454 sbi->s_group_desc[i] = sb_bread(sb, block);
1455 if (!sbi->s_group_desc[i]) {
1456 printk (KERN_ERR "EXT3-fs: "
1457 "can't read group descriptor %d\n", i);
1462 if (!ext3_check_descriptors (sb)) {
1463 printk (KERN_ERR "EXT3-fs: group descriptors corrupted !\n");
1466 sbi->s_gdb_count = db_count;
1467 get_random_bytes(&sbi->s_next_generation, sizeof(u32));
1468 spin_lock_init(&sbi->s_next_gen_lock);
1470 * set up enough so that it can read an inode
1472 sb->s_op = &ext3_sops;
1473 sb->s_export_op = &ext3_export_ops;
1475 sb->s_qcop = &ext3_qctl_operations;
1476 sb->dq_op = &ext3_quota_operations;
1478 INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
1482 needs_recovery = (es->s_last_orphan != 0 ||
1483 EXT3_HAS_INCOMPAT_FEATURE(sb,
1484 EXT3_FEATURE_INCOMPAT_RECOVER));
1487 * The first inode we look at is the journal inode. Don't try
1488 * root first: it may be modified in the journal!
1490 if (!test_opt(sb, NOLOAD) &&
1491 EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) {
1492 if (ext3_load_journal(sb, es))
1494 } else if (journal_inum) {
1495 if (ext3_create_journal(sb, es, journal_inum))
1500 "ext3: No journal on filesystem on %s\n",
1505 /* We have now updated the journal if required, so we can
1506 * validate the data journaling mode. */
1507 switch (test_opt(sb, DATA_FLAGS)) {
1509 /* No mode set, assume a default based on the journal
1510 capabilities: ORDERED_DATA if the journal can
1511 cope, else JOURNAL_DATA */
1512 if (journal_check_available_features
1513 (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE))
1514 set_opt(sbi->s_mount_opt, ORDERED_DATA);
1516 set_opt(sbi->s_mount_opt, JOURNAL_DATA);
1519 case EXT3_MOUNT_ORDERED_DATA:
1520 case EXT3_MOUNT_WRITEBACK_DATA:
1521 if (!journal_check_available_features
1522 (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
1523 printk(KERN_ERR "EXT3-fs: Journal does not support "
1524 "requested data journaling mode\n");
1532 * The journal_load will have done any necessary log recovery,
1533 * so we can safely mount the rest of the filesystem now.
1536 root = iget(sb, EXT3_ROOT_INO);
1537 sb->s_root = d_alloc_root(root);
1539 printk(KERN_ERR "EXT3-fs: get root inode failed\n");
1543 if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
1546 printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
1550 ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY);
1552 * akpm: core read_super() calls in here with the superblock locked.
1553 * That deadlocks, because orphan cleanup needs to lock the superblock
1554 * in numerous places. Here we just pop the lock - it's relatively
1555 * harmless, because we are now ready to accept write_super() requests,
1556 * and aviro says that's the only reason for hanging onto the
1559 EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS;
1560 ext3_orphan_cleanup(sb, es);
1561 EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
1563 printk (KERN_INFO "EXT3-fs: recovery complete.\n");
1564 ext3_mark_recovery_complete(sb, es);
1565 printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
1566 test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
1567 test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
1570 percpu_counter_mod(&sbi->s_freeblocks_counter,
1571 ext3_count_free_blocks(sb));
1572 percpu_counter_mod(&sbi->s_freeinodes_counter,
1573 ext3_count_free_inodes(sb));
1574 percpu_counter_mod(&sbi->s_dirs_counter,
1575 ext3_count_dirs(sb));
1580 journal_destroy(sbi->s_journal);
1582 kfree(sbi->s_debts);
1583 for (i = 0; i < db_count; i++)
1584 brelse(sbi->s_group_desc[i]);
1585 kfree(sbi->s_group_desc);
1588 for (i = 0; i < MAXQUOTAS; i++) {
1589 if (sbi->s_qf_names[i])
1590 kfree(sbi->s_qf_names[i]);
1593 ext3_blkdev_remove(sbi);
1596 sb->s_fs_info = NULL;
1602 * Setup any per-fs journal parameters now. We'll do this both on
1603 * initial mount, once the journal has been initialised but before we've
1604 * done any recovery; and again on any subsequent remount.
1606 static void ext3_init_journal_params(struct ext3_sb_info *sbi,
1609 if (sbi->s_commit_interval)
1610 journal->j_commit_interval = sbi->s_commit_interval;
1611 /* We could also set up an ext3-specific default for the commit
1612 * interval here, but for now we'll just fall back to the jbd
1617 static journal_t *ext3_get_journal(struct super_block *sb, int journal_inum)
1619 struct inode *journal_inode;
1622 /* First, test for the existence of a valid inode on disk. Bad
1623 * things happen if we iget() an unused inode, as the subsequent
1624 * iput() will try to delete it. */
1626 journal_inode = iget(sb, journal_inum);
1627 if (!journal_inode) {
1628 printk(KERN_ERR "EXT3-fs: no journal found.\n");
1631 if (!journal_inode->i_nlink) {
1632 make_bad_inode(journal_inode);
1633 iput(journal_inode);
1634 printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n");
1638 jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
1639 journal_inode, journal_inode->i_size);
1640 if (is_bad_inode(journal_inode) || !S_ISREG(journal_inode->i_mode)) {
1641 printk(KERN_ERR "EXT3-fs: invalid journal inode.\n");
1642 iput(journal_inode);
1646 journal = journal_init_inode(journal_inode);
1648 printk(KERN_ERR "EXT3-fs: Could not load journal inode\n");
1649 iput(journal_inode);
1651 journal->j_private = sb;
1652 ext3_init_journal_params(EXT3_SB(sb), journal);
1656 static journal_t *ext3_get_dev_journal(struct super_block *sb,
1659 struct buffer_head * bh;
1663 int hblock, blocksize;
1664 unsigned long sb_block;
1665 unsigned long offset;
1666 struct ext3_super_block * es;
1667 struct block_device *bdev;
1669 bdev = ext3_blkdev_get(j_dev);
1673 if (bd_claim(bdev, sb)) {
1675 "EXT3: failed to claim external journal device.\n");
1680 blocksize = sb->s_blocksize;
1681 hblock = bdev_hardsect_size(bdev);
1682 if (blocksize < hblock) {
1684 "EXT3-fs: blocksize too small for journal device.\n");
1688 sb_block = EXT3_MIN_BLOCK_SIZE / blocksize;
1689 offset = EXT3_MIN_BLOCK_SIZE % blocksize;
1690 set_blocksize(bdev, blocksize);
1691 if (!(bh = __bread(bdev, sb_block, blocksize))) {
1692 printk(KERN_ERR "EXT3-fs: couldn't read superblock of "
1693 "external journal\n");
1697 es = (struct ext3_super_block *) (((char *)bh->b_data) + offset);
1698 if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
1699 !(le32_to_cpu(es->s_feature_incompat) &
1700 EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
1701 printk(KERN_ERR "EXT3-fs: external journal has "
1702 "bad superblock\n");
1707 if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
1708 printk(KERN_ERR "EXT3-fs: journal UUID does not match\n");
1713 len = le32_to_cpu(es->s_blocks_count);
1714 start = sb_block + 1;
1715 brelse(bh); /* we're done with the superblock */
1717 journal = journal_init_dev(bdev, sb->s_bdev,
1718 start, len, blocksize);
1720 printk(KERN_ERR "EXT3-fs: failed to create device journal\n");
1723 journal->j_private = sb;
1724 ll_rw_block(READ, 1, &journal->j_sb_buffer);
1725 wait_on_buffer(journal->j_sb_buffer);
1726 if (!buffer_uptodate(journal->j_sb_buffer)) {
1727 printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
1730 if (ntohl(journal->j_superblock->s_nr_users) != 1) {
1731 printk(KERN_ERR "EXT3-fs: External journal has more than one "
1732 "user (unsupported) - %d\n",
1733 ntohl(journal->j_superblock->s_nr_users));
1736 EXT3_SB(sb)->journal_bdev = bdev;
1737 ext3_init_journal_params(EXT3_SB(sb), journal);
1740 journal_destroy(journal);
1742 ext3_blkdev_put(bdev);
1746 static int ext3_load_journal(struct super_block * sb,
1747 struct ext3_super_block * es)
1750 int journal_inum = le32_to_cpu(es->s_journal_inum);
1751 dev_t journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
1753 int really_read_only;
1755 really_read_only = bdev_read_only(sb->s_bdev);
1758 * Are we loading a blank journal or performing recovery after a
1759 * crash? For recovery, we need to check in advance whether we
1760 * can get read-write access to the device.
1763 if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
1764 if (sb->s_flags & MS_RDONLY) {
1765 printk(KERN_INFO "EXT3-fs: INFO: recovery "
1766 "required on readonly filesystem.\n");
1767 if (really_read_only) {
1768 printk(KERN_ERR "EXT3-fs: write access "
1769 "unavailable, cannot proceed.\n");
1772 printk (KERN_INFO "EXT3-fs: write access will "
1773 "be enabled during recovery.\n");
1777 if (journal_inum && journal_dev) {
1778 printk(KERN_ERR "EXT3-fs: filesystem has both journal "
1779 "and inode journals!\n");
1784 if (!(journal = ext3_get_journal(sb, journal_inum)))
1787 if (!(journal = ext3_get_dev_journal(sb, journal_dev)))
1791 if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
1792 err = journal_update_format(journal);
1794 printk(KERN_ERR "EXT3-fs: error updating journal.\n");
1795 journal_destroy(journal);
1800 if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER))
1801 err = journal_wipe(journal, !really_read_only);
1803 err = journal_load(journal);
1806 printk(KERN_ERR "EXT3-fs: error loading journal.\n");
1807 journal_destroy(journal);
1811 EXT3_SB(sb)->s_journal = journal;
1812 ext3_clear_journal_err(sb, es);
1816 static int ext3_create_journal(struct super_block * sb,
1817 struct ext3_super_block * es,
1822 if (sb->s_flags & MS_RDONLY) {
1823 printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to "
1824 "create journal.\n");
1828 if (!(journal = ext3_get_journal(sb, journal_inum)))
1831 printk(KERN_INFO "EXT3-fs: creating new journal on inode %d\n",
1834 if (journal_create(journal)) {
1835 printk(KERN_ERR "EXT3-fs: error creating journal.\n");
1836 journal_destroy(journal);
1840 EXT3_SB(sb)->s_journal = journal;
1842 ext3_update_dynamic_rev(sb);
1843 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1844 EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL);
1846 es->s_journal_inum = cpu_to_le32(journal_inum);
1849 /* Make sure we flush the recovery flag to disk. */
1850 ext3_commit_super(sb, es, 1);
1855 static void ext3_commit_super (struct super_block * sb,
1856 struct ext3_super_block * es,
1859 struct buffer_head *sbh = EXT3_SB(sb)->s_sbh;
1863 es->s_wtime = cpu_to_le32(get_seconds());
1864 es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
1865 es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
1866 BUFFER_TRACE(sbh, "marking dirty");
1867 mark_buffer_dirty(sbh);
1869 sync_dirty_buffer(sbh);
1874 * Have we just finished recovery? If so, and if we are mounting (or
1875 * remounting) the filesystem readonly, then we will end up with a
1876 * consistent fs on disk. Record that fact.
1878 static void ext3_mark_recovery_complete(struct super_block * sb,
1879 struct ext3_super_block * es)
1881 journal_flush(EXT3_SB(sb)->s_journal);
1882 if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) &&
1883 sb->s_flags & MS_RDONLY) {
1884 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1886 ext3_commit_super(sb, es, 1);
1891 * If we are mounting (or read-write remounting) a filesystem whose journal
1892 * has recorded an error from a previous lifetime, move that error to the
1893 * main filesystem now.
1895 static void ext3_clear_journal_err(struct super_block * sb,
1896 struct ext3_super_block * es)
1902 journal = EXT3_SB(sb)->s_journal;
1905 * Now check for any error status which may have been recorded in the
1906 * journal by a prior ext3_error() or ext3_abort()
1909 j_errno = journal_errno(journal);
1913 errstr = ext3_decode_error(sb, j_errno, nbuf);
1914 ext3_warning(sb, __FUNCTION__, "Filesystem error recorded "
1915 "from previous mount: %s", errstr);
1916 ext3_warning(sb, __FUNCTION__, "Marking fs in need of "
1917 "filesystem check.");
1919 EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
1920 es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
1921 ext3_commit_super (sb, es, 1);
1923 journal_clear_err(journal);
1928 * Force the running and committing transactions to commit,
1929 * and wait on the commit.
1931 int ext3_force_commit(struct super_block *sb)
1936 if (sb->s_flags & MS_RDONLY)
1939 journal = EXT3_SB(sb)->s_journal;
1941 ret = ext3_journal_force_commit(journal);
1946 * Ext3 always journals updates to the superblock itself, so we don't
1947 * have to propagate any other updates to the superblock on disk at this
1948 * point. Just start an async writeback to get the buffers on their way
1951 * This implicitly triggers the writebehind on sync().
1954 void ext3_write_super (struct super_block * sb)
1956 if (down_trylock(&sb->s_lock) == 0)
1961 static int ext3_sync_fs(struct super_block *sb, int wait)
1966 if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) {
1968 log_wait_commit(EXT3_SB(sb)->s_journal, target);
1974 * LVM calls this function before a (read-only) snapshot is created. This
1975 * gives us a chance to flush the journal completely and mark the fs clean.
1977 void ext3_write_super_lockfs(struct super_block *sb)
1981 if (!(sb->s_flags & MS_RDONLY)) {
1982 journal_t *journal = EXT3_SB(sb)->s_journal;
1984 /* Now we set up the journal barrier. */
1985 journal_lock_updates(journal);
1986 journal_flush(journal);
1988 /* Journal blocked and flushed, clear needs_recovery flag. */
1989 EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
1990 ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
1995 * Called by LVM after the snapshot is done. We need to reset the RECOVER
1996 * flag here, even though the filesystem is not technically dirty yet.
1998 void ext3_unlockfs(struct super_block *sb)
2000 if (!(sb->s_flags & MS_RDONLY)) {
2002 /* Reser the needs_recovery flag before the fs is unlocked. */
2003 EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
2004 ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1);
2006 journal_unlock_updates(EXT3_SB(sb)->s_journal);
2010 int ext3_remount (struct super_block * sb, int * flags, char * data)
2012 struct ext3_super_block * es;
2013 struct ext3_sb_info *sbi = EXT3_SB(sb);
2017 * Allow the "check" option to be passed as a remount option.
2019 if (!parse_options(data, sb, &tmp, 1))
2022 if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
2023 ext3_abort(sb, __FUNCTION__, "Abort forced by user");
2025 sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
2026 ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
2030 ext3_init_journal_params(sbi, sbi->s_journal);
2032 if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) {
2033 if (sbi->s_mount_opt & EXT3_MOUNT_ABORT)
2036 if (*flags & MS_RDONLY) {
2038 * First of all, the unconditional stuff we have to do
2039 * to disable replay of the journal when we next remount
2041 sb->s_flags |= MS_RDONLY;
2044 * OK, test if we are remounting a valid rw partition
2045 * readonly, and if so set the rdonly flag and then
2046 * mark the partition as valid again.
2048 if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) &&
2049 (sbi->s_mount_state & EXT3_VALID_FS))
2050 es->s_state = cpu_to_le16(sbi->s_mount_state);
2052 ext3_mark_recovery_complete(sb, es);
2055 if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
2056 ~EXT3_FEATURE_RO_COMPAT_SUPP))) {
2057 printk(KERN_WARNING "EXT3-fs: %s: couldn't "
2058 "remount RDWR because of unsupported "
2059 "optional features (%x).\n",
2064 * Mounting a RDONLY partition read-write, so reread
2065 * and store the current valid flag. (It may have
2066 * been changed by e2fsck since we originally mounted
2069 ext3_clear_journal_err(sb, es);
2070 sbi->s_mount_state = le16_to_cpu(es->s_state);
2071 if (!ext3_setup_super (sb, es, 0))
2072 sb->s_flags &= ~MS_RDONLY;
2078 int ext3_statfs (struct super_block * sb, struct kstatfs * buf)
2080 struct ext3_super_block *es = EXT3_SB(sb)->s_es;
2081 unsigned long overhead;
2084 if (test_opt (sb, MINIX_DF))
2088 * Compute the overhead (FS structures)
2092 * All of the blocks before first_data_block are
2095 overhead = le32_to_cpu(es->s_first_data_block);
2098 * Add the overhead attributed to the superblock and
2099 * block group descriptors. If the sparse superblocks
2100 * feature is turned on, then not all groups have this.
2102 for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++)
2103 overhead += ext3_bg_has_super(sb, i) +
2104 ext3_bg_num_gdb(sb, i);
2107 * Every block group has an inode bitmap, a block
2108 * bitmap, and an inode table.
2110 overhead += (EXT3_SB(sb)->s_groups_count *
2111 (2 + EXT3_SB(sb)->s_itb_per_group));
2114 buf->f_type = EXT3_SUPER_MAGIC;
2115 buf->f_bsize = sb->s_blocksize;
2116 buf->f_blocks = le32_to_cpu(es->s_blocks_count) - overhead;
2117 buf->f_bfree = ext3_count_free_blocks (sb);
2118 buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
2119 if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
2121 buf->f_files = le32_to_cpu(es->s_inodes_count);
2122 buf->f_ffree = ext3_count_free_inodes (sb);
2123 buf->f_namelen = EXT3_NAME_LEN;
2127 /* Helper function for writing quotas on sync - we need to start transaction before quota file
2128 * is locked for write. Otherwise the are possible deadlocks:
2129 * Process 1 Process 2
2130 * ext3_create() quota_sync()
2131 * journal_start() write_dquot()
2132 * DQUOT_INIT() down(dqio_sem)
2133 * down(dqio_sem) journal_start()
2139 static inline struct inode *dquot_to_inode(struct dquot *dquot)
2141 return sb_dqopt(dquot->dq_sb)->files[dquot->dq_type]->f_dentry->d_inode;
2144 static int ext3_dquot_initialize(struct inode *inode, int type)
2149 /* We may create quota structure so we need to reserve enough blocks */
2150 handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS);
2152 return PTR_ERR(handle);
2153 ret = dquot_initialize(inode, type);
2154 err = ext3_journal_stop(handle);
2160 static int ext3_dquot_drop(struct inode *inode)
2165 /* We may delete quota structure so we need to reserve enough blocks */
2166 handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS);
2168 return PTR_ERR(handle);
2169 ret = dquot_drop(inode);
2170 err = ext3_journal_stop(handle);
2176 static int ext3_write_dquot(struct dquot *dquot)
2181 handle = ext3_journal_start(dquot_to_inode(dquot),
2182 EXT3_QUOTA_TRANS_BLOCKS);
2184 return PTR_ERR(handle);
2185 ret = dquot_commit(dquot);
2186 err = ext3_journal_stop(handle);
2192 static int ext3_mark_dquot_dirty(struct dquot *dquot)
2194 /* Are we journalling quotas? */
2195 if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
2196 EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
2197 dquot_mark_dquot_dirty(dquot);
2198 return ext3_write_dquot(dquot);
2200 return dquot_mark_dquot_dirty(dquot);
2204 static int ext3_write_info(struct super_block *sb, int type)
2209 /* Data block + inode block */
2210 handle = ext3_journal_start(sb->s_root->d_inode, 2);
2212 return PTR_ERR(handle);
2213 ret = dquot_commit_info(sb, type);
2214 err = ext3_journal_stop(handle);
2221 * Turn on quotas during mount time - we need to find
2222 * the quota file and such...
2224 static int ext3_quota_on_mount(struct super_block *sb, int type)
2227 struct dentry *dentry;
2228 struct qstr name = { .name = EXT3_SB(sb)->s_qf_names[type],
2230 .len = strlen(EXT3_SB(sb)->s_qf_names[type])};
2232 dentry = lookup_hash(&name, sb->s_root);
2234 return PTR_ERR(dentry);
2235 err = vfs_quota_on_mount(type, EXT3_SB(sb)->s_jquota_fmt, dentry);
2238 /* We keep the dentry reference if everything went ok - we drop it
2239 * on quota_off time */
2243 /* Turn quotas off during mount time */
2244 static int ext3_quota_off_mount(struct super_block *sb, int type)
2247 struct dentry *dentry;
2249 dentry = sb_dqopt(sb)->files[type]->f_dentry;
2250 err = vfs_quota_off_mount(sb, type);
2251 /* We invalidate dentry - it has at least wrong hash... */
2252 d_invalidate(dentry);
2258 * Standard function to be called on quota_on
2260 static int ext3_quota_on(struct super_block *sb, int type, int format_id,
2264 struct nameidata nd;
2266 /* Not journalling quota? */
2267 if (!EXT3_SB(sb)->s_qf_names[USRQUOTA] &&
2268 !EXT3_SB(sb)->s_qf_names[GRPQUOTA])
2269 return vfs_quota_on(sb, type, format_id, path);
2270 err = path_lookup(path, LOOKUP_FOLLOW, &nd);
2273 /* Quotafile not on the same filesystem? */
2274 if (nd.mnt->mnt_sb != sb)
2276 /* Quotafile not of fs root? */
2277 if (nd.dentry->d_parent->d_inode != sb->s_root->d_inode)
2279 "EXT3-fs: Quota file not on filesystem root. "
2280 "Journalled quota will not work.\n");
2281 if (!ext3_should_journal_data(nd.dentry->d_inode))
2282 printk(KERN_WARNING "EXT3-fs: Quota file does not have "
2283 "data-journalling. Journalled quota will not work.\n");
2285 return vfs_quota_on(sb, type, format_id, path);
2290 static struct super_block *ext3_get_sb(struct file_system_type *fs_type,
2291 int flags, const char *dev_name, void *data)
2293 return get_sb_bdev(fs_type, flags, dev_name, data, ext3_fill_super);
2296 static struct file_system_type ext3_fs_type = {
2297 .owner = THIS_MODULE,
2299 .get_sb = ext3_get_sb,
2300 .kill_sb = kill_block_super,
2301 .fs_flags = FS_REQUIRES_DEV,
2304 static int __init init_ext3_fs(void)
2306 int err = init_ext3_xattr();
2309 err = init_inodecache();
2312 err = register_filesystem(&ext3_fs_type);
2317 destroy_inodecache();
2323 static void __exit exit_ext3_fs(void)
2325 unregister_filesystem(&ext3_fs_type);
2326 destroy_inodecache();
2330 MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
2331 MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions");
2332 MODULE_LICENSE("GPL");
2333 module_init(init_ext3_fs)
2334 module_exit(exit_ext3_fs)