1 <!-- RIBCL Sample Script for HP Lights-Out Products -->
\r
2 <!--Copyright (c) 2003,2007 Hewlett-Packard Development Company, L.P.-->
\r
4 <!-- Description: This is a sample XML script to power cycle (off -->
\r
5 <!-- and then back on) the host server in which the -->
\r
6 <!-- following device is operating: -->
\r
7 <!-- Integrated Lights-Out 2 (iLO 2) -->
\r
8 <!-- Integrated Lights-Out (iLO) -->
\r
9 <!-- Remote Insight Lights-Out Edition II (RILOE II) -->
\r
11 <!-- NOTE: You will need to replace the USER_LOGIN and PASSWORD -->
\r
12 <!-- values with values that are appropriate for your -->
\r
13 <!-- environment. -->
\r
15 <!-- This script will NOT attempt to gracefully shutdown the -->
\r
16 <!-- host operating system before it powers off the server. -->
\r
18 <!-- If graceful shutdown is needed (if your OS supports it), -->
\r
19 <!-- use the Set_Host_Power.xml script (with -->
\r
20 <!-- SET_HOST_POWER HOST_POWER="No") to attempt a graceful -->
\r
21 <!-- shutdown of the OS before powering off the server and -->
\r
22 <!-- then use the Set_Host_Power.xml script (with -->
\r
23 <!-- SET_HOST_POWER HOST_POWER="Yes") to turn the server back -->
\r
27 <!-- Use CPQLOCFG.EXE ver 2.26 or greater with this script. -->
\r
29 <!-- This script was written for iLO 2 firmware version 1.30 -->
\r
32 <!-- See "HP Integrated Lights-Out Management Processor -->
\r
33 <!-- Scripting and Command Line Resource Guide" for more -->
\r
34 <!-- information on scripting and the syntax of the RIBCL -->
\r
37 <!-- Firmware support infomation for this script: -->
\r
38 <!-- iLO 2 - All versions. -->
\r
39 <!-- iLO - All versions. -->
\r
40 <!-- RILOE II - All versions. -->
\r
42 <RIBCL VERSION="2.0">
\r
43 <LOGIN USER_LOGIN="adminname" PASSWORD="password">
\r
44 <SERVER_INFO MODE="write">
\r