6 # close stdin, as with ubuntu and debian VMs this script tends to hang and wait for input ..
9 # old guests have e.g. mount in /bin but this is no longer part of
10 # the standard PATH in recent hosts after usrmove, so let's keep it simple
11 export PATH=$PATH:/bin:/sbin
13 # default values, tunable with command-line options
15 DEFAULT_PLDISTRO=planetlab
16 DEFAULT_PERSONALITY=linux64
17 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
18 DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
20 # default gpg path used in signing yum repo
21 DEFAULT_GPGPATH="/etc/planetlab"
22 # default email to use in gpg secring
23 DEFAULT_GPGUID="root@$( /bin/hostname )"
25 DEFAULT_TESTCONFIG="default"
26 # for passing args to run_log
29 # for publishing results, and the tests settings
30 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
31 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
32 # this is where the buildurl is pointing towards
33 DEFAULT_WEBROOT="/build/"
34 DEFAULT_TESTMASTER="testmaster.onelab.eu"
37 # assuming vm runs in UTC
38 DATE=$(date +'%Y.%m.%d')
39 BUILD_BEG=$(date +'%H:%M')
40 BUILD_BEG_S=$(date +'%s')
42 # still using /vservers for legacy reasons
43 # as far as the build & test infra, we could adopt a new name
44 # but the PL code still uses this name for now, so let's keep it simple
51 echo /vservers/$slice.log.txt
54 # wrap a quick summary of suspicious stuff
55 # this is to focus on installation that go wrong
56 # use with care, a *lot* of other things can go bad as well
59 echo "******************** BEG SUMMARY"
62 # read a full log and tries to extract the interesting stuff
65 m_show_line=re.compile(".* (BEG|END) (RPM|LXC).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within LXC (BEG|END) .*|.* MAIN (BEG|END).*")
66 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
67 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
68 m_installing_end=re.compile('Installed:.*')
69 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
70 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
72 def summary (filename):
81 for line in f.xreadlines():
82 # first off : discard warnings related to doc
83 if m_installing_doc1.match(line):
84 (begin,end)=m_installing_doc1.match(line).groups()
86 if m_installing_doc2.match(line):
87 (begin,end)=m_installing_doc2.match(line).groups()
89 # unconditionnally show these lines
90 if m_show_line.match(line):
92 # an 'installing' line with messages afterwards : needs to be echoed
93 elif m_installing_err.match(line):
94 (installing,error)=m_installing_err.match(line).groups()
95 print '>>>',installing
98 # closing an 'installing' section
99 elif m_installing_end.match(line):
101 # any 'installing' line
102 elif m_installing_any.match(line):
104 installing=m_installing_any.match(line).group(1)
105 print '>>>',installing
107 # print lines when echo is true
109 if echo: print '>>>',line,
112 print 'Failed to analyze',filename
114 for arg in sys.argv[1:]:
117 echo "******************** END SUMMARY"
120 ### we might build on a box other than the actual web server
121 # utilities for handling the pushed material (rpms, logfiles, ...)
122 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
123 function webpublish () { ssh root@${WEBHOST} "$@" ; }
124 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
125 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
126 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
127 # provide remote dir as first argument, so any number of local files can be passed next
128 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $2 root@${WEBHOST}:$1 ; }
129 function webpublish_rsync_files () {
131 rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
134 function pretty_duration () {
135 total_seconds=$1; shift
137 seconds=$(($total_seconds%60))
138 total_minutes=$(($total_seconds/60))
139 minutes=$(($total_minutes%60))
140 hours=$(($total_minutes/60))
142 printf "%02d:%02d:%02d" $hours $minutes $seconds
145 # Notify recipient of failure or success, manage various stamps
148 # early stage ? - let's not create /build/@PLDISTRO@
149 if [ -z "$WEBLOG" ] ; then
152 WEBBASE=/tmp/lbuild-early-$(date +%Y-%m-%d)
153 WEBLOG=/tmp/lbuild-early-$(date +%Y-%m-%d).log.txt
155 webpublish mkdir -p $WEBBASE ||:
156 webpublish_cp_local_to_remote $LOG $WEBLOG ||:
157 summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
158 (echo -n "============================== $COMMAND: failure at " ; date ; \
159 webpublish tail --lines=1000 $WEBLOG) | \
160 webpublish_cp_stdin_to_file $WEBBASE.ko ||:
161 if [ -n "$MAILTO" ] ; then
163 echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
164 echo "To: $MAILTO" ; \
165 echo "see build results at $WEBBASE_URL" ; \
166 echo "including full build log at $WEBBASE_URL/log.txt" ; \
167 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
168 echo "........................................" ; \
169 webpublish tail --lines=1000 $WEBLOG ) | \
175 function success () {
177 # early stage ? - let's not create /build/@PLDISTRO@
178 if [ -z "$WEBLOG" ] ; then
181 WEBLOG=/tmp/lbuild-early-$(date +%Y-%m-%d).log.txt
183 webpublish mkdir -p $WEBBASE
184 webpublish_cp_local_to_remote $LOG $WEBLOG
185 summary $LOG | webpublish_append_stdin_to_file $WEBLOG
186 if [ -n "$DO_TEST" ] ; then
189 if [ -n "$IGNORED" ] ; then short_message="PASS/WARN"; ext="warn"; fi
191 echo "Successfully built and tested" ; \
192 echo "see build results at $WEBBASE_URL" ; \
193 echo "including full build log at $WEBBASE_URL/log.txt" ; \
194 echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
195 [ -n "$IGNORED" ] && echo "WARNING: some tests steps failed but were ignored - see trace file" ; \
196 ) | webpublish_cp_stdin_to_file $WEBBASE.$ext
197 webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
199 short_message="PKGOK"
201 echo "Successful package-only build, no test requested" ; \
202 echo "see build results at $WEBBASE_URL" ; \
203 echo "including full build log at $WEBBASE_URL/log.txt" ; \
204 ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
205 webpublish rm -f $WEBBASE.ko
207 BUILD_END=$(date +'%H:%M')
208 BUILD_END_S=$(date +'%s')
209 if [ -n "$MAILTO" ] ; then
211 echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
212 echo "To: $MAILTO" ; \
213 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
214 echo "see build results at $WEBBASE_URL" ; \
215 echo "including full build log at $WEBBASE_URL/log.txt" ; \
216 [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
217 [ -n "$IGNORED" ] && echo "WARNING: some tests steps failed but were ignored - see trace file" ; \
218 echo "BUILD TIME: begin $BUILD_BEG -- end $BUILD_END -- duration $(pretty_duration $(($BUILD_END_S-$BUILD_BEG_S)))" ; \
221 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
222 # doesn't fix the problem, I'll remove it -- Sapan.
227 ##############################
228 # manage root / container contexts
229 function in_root_context () {
230 rpm -q libvirt > /dev/null
233 # run in the vm - do not manage success/failure, will be done from the root ctx
239 echo -n "============================== Starting $COMMAND:build on "
245 echo "Running make IN $(pwd)"
247 # stuff our own variable settings
248 MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
249 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
250 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
251 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
252 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
253 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
254 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
255 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
257 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
260 /build/latex-first-run.sh || :
263 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
265 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
267 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
271 # this was formerly run in the myplc-devel chroot but now is run in the root context,
272 # this is so that the .ssh config gets done manually, and once and for all
273 function run_log () {
278 echo "============================== BEG $COMMAND:run_log on $(date)"
280 ### the URL to the RPMS/<arch> location
281 # f12 now has everything in i686; try i386 first as older fedoras have both
283 for a in i386 i686 x86_64; do
284 archdir=$(rootdir $BASE)/build/RPMS/$a
285 if [ -d $archdir ] ; then
286 # where was that installed
287 url=$(echo $archdir | sed -e "s,$(rootdir $BASE)/build,${WEBPATH}/${BASE},")
288 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
293 if [ -z "$url" ] ; then
294 echo "$COMMAND: Cannot locate arch URL for testing"
299 testmaster_ssh="root@${TESTMASTER}"
301 # test directory name on test box
305 ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
307 # check it out in the build
308 virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "make -C /build tests-module"
310 # push it onto the testmaster - just the 'system' subdir is enough
311 rsync --verbose --archive $(rootdir $BASE)/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
312 # toss the build in the bargain, so the tests don't need to mess with extracting it
313 rsync --verbose --archive $(rootdir $BASE)/build/MODULES/build ${testmaster_ssh}:${BASE}/
315 # invoke test on testbox - pass url and build url - so the tests can use lbuild-initvm.sh
316 run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
318 # temporarily turn off set -e
321 ssh 2>&1 ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all; retcod=$?
325 # interpret retcod of TestMain.py; 2 means there were ignored steps that failed
326 echo "retcod from run_log" $retcod
328 0) success=true; IGNORED="" ;;
329 2) success=true; IGNORED=true ;;
330 *) success=""; IGNORED="" ;;
333 # gather logs in the build vm
334 mkdir -p $(rootdir $BASE)/build/testlogs
335 rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ $(rootdir $BASE)/build/testlogs
336 # push them to the build web
337 chmod -R a+r $(rootdir $BASE)/build/testlogs/
338 webpublish_rsync_dir $WEBPATH/$BASE/testlogs/ $(rootdir $BASE)/build/testlogs/
340 echo "============================== END $COMMAND:run_log on $(date)"
342 if [ -z "$success" ] ; then
343 echo "Tests have failed - bailing out"
349 # this part won't work if WEBHOST does not match the local host
350 # would need to be made webpublish_* compliant
351 # but do we really need this feature anyway ?
352 function sign_node_packages () {
354 echo "Signing node packages"
358 repository=$WEBPATH/$BASE/RPMS/
359 # the rpms that need signing
361 # and the corresponding stamps
364 for package in $(find $repository/ -name '*.rpm') ; do
365 stamp=$repository/signed-stamps/$(basename $package).signed
366 # If package is newer than signature stamp
367 if [ $package -nt $stamp ] ; then
368 new_rpms="$new_rpms $package"
369 new_stamps="$new_stamps $stamp"
371 # Or than createrepo database
372 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
375 if [ -n "$new_rpms" ] ; then
376 # Create a stamp once the package gets signed
377 mkdir $repository/signed-stamps 2> /dev/null
379 # Sign RPMS. setsid detaches rpm from the terminal,
380 # allowing the (hopefully blank) GPG password to be
381 # entered from stdin instead of /dev/tty.
383 --define "_signature gpg" \
384 --define "_gpg_path $GPGPATH" \
385 --define "_gpg_name $GPGUID" \
386 --resign $new_rpms && touch $new_stamps
389 # Update repository index / yum metadata.
390 if [ -n "$need_createrepo" ] ; then
391 echo "Indexing node packages after signing"
392 if [ -f $repository/yumgroups.xml ] ; then
393 createrepo --quiet -g yumgroups.xml $repository
395 createrepo --quiet $repository
400 function show_env () {
402 echo FCDISTRO=$FCDISTRO
403 echo PLDISTRO=$PLDISTRO
404 echo PERSONALITY=$PERSONALITY
406 echo BUILD_SCM_URL=$BUILD_SCM_URL
407 echo MAKEVARS="${MAKEVARS[@]}"
408 echo DRY_RUN="$DRY_RUN"
409 echo PLDISTROTAGS="$PLDISTROTAGS"
410 # this does not help, it's not yet set when we run show_env
411 #echo WEBPATH="$WEBPATH"
412 echo TESTBUILDURL="$TESTBUILDURL"
413 echo WEBHOST="$WEBHOST"
414 if in_root_context ; then
415 echo PLDISTROTAGS="$PLDISTROTAGS"
417 if [ -f /build/$PLDISTROTAGS ] ; then
418 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
419 cat /build/$PLDISTROTAGS
420 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
422 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
428 function setupssh () {
432 if [ -f ${sshkey} ] ; then
433 SSHDIR=$(rootdir ${base})/root/.ssh
435 cp $sshkey ${SSHDIR}/thekey
437 echo " IdentityFile ~/.ssh/thekey"; \
438 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
440 chmod 400 ${SSHDIR}/*
442 echo "WARNING : could not find provided ssh key $sshkey - ignored"
447 echo "Usage: $COMMAND [option] [var=value...] make-targets"
448 echo "Supported options"
449 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
450 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
451 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
452 echo " -m mailto - no default"
453 echo " -s build_scm_url - git URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
454 echo " define GIT tag or branch name appending @tagname to url"
455 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
456 echo " -b base - defaults to $DEFAULT_BASE"
457 echo " @NAME@ replaced as appropriate"
458 echo " -o base: (overwrite) do not re-create vm, re-use base instead"
459 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
460 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
461 echo " -y {pl,pg} - passed to run_log"
462 echo " -e step - passed to run_log"
463 echo " -i step - passed to run_log"
464 echo " -X : passes --lxc to run_log"
465 echo " -S : passes --vs to run_log"
466 echo " -x <run_log_args> - a hook to pass other arguments to run_log"
467 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
468 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
469 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
470 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
471 echo " -Y - sign yum repo in webpath"
472 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
473 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
474 echo " -K sshkey - specify ssh key to use when reaching git over ssh"
475 echo " -S - do not publish source rpms"
476 echo " -B - run build only"
477 echo " -T - run test only"
478 echo " -n - dry-run: -n passed to make - vm gets created though - no mail sent"
479 echo " -v - be verbose"
480 echo " -7 - uses weekday-@FCDISTRO@ as base"
481 echo " --build-branch branch - build using the branch from build module"
501 OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:i:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
509 -f) FCDISTRO=$2; shift 2 ;;
510 -d) PLDISTRO=$2; shift 2 ;;
511 -p) PERSONALITY=$2; shift 2 ;;
512 -m) MAILTO=$2; shift 2 ;;
513 -s) BUILD_SCM_URL=$2; shift 2 ;;
514 -t) PLDISTROTAGS=$2; shift 2 ;;
515 -b) BASE=$2; shift 2 ;;
516 -o) OVERBASE=$2; shift 2 ;;
517 -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
518 ########## passing stuff to run_log
519 # -y foo -> run_log -y foo
520 -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
521 # -e foo -> run_log -e foo
522 -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
523 -i) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --ignore $2"; shift 2 ;;
524 # -X -> run_log --lxc
525 -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
527 -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
528 # more general form to pass args to run_log
529 # -x foo -> run_log foo
530 -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
532 -w) WEBPATH=$2; shift 2 ;;
533 -W) TESTBUILDURL=$2; shift 2 ;;
534 -r) WEBROOT=$2; shift 2 ;;
535 -M) TESTMASTER=$2; shift 2 ;;
536 -Y) SIGNYUMREPO=true; shift ;;
537 -g) GPGPATH=$2; shift 2 ;;
538 -u) GPGUID=$2; shift 2 ;;
539 -K) SSH_KEY=$2; shift 2 ;;
540 -S) PUBLISH_SRPMS="" ; shift ;;
541 -B) DO_TEST= ; shift ;;
542 -T) DO_BUILD= ; shift;;
543 -n) DRY_RUN="-n" ; shift ;;
544 -v) set -x ; VERBOSE="-v" ; shift ;;
545 -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
546 -P) PREINSTALLED="-P $2"; shift 2;;
552 # preserve options for passing them again later, together with expanded base
555 # allow var=value stuff;
556 for target in "$@" ; do
557 # check if contains '='
558 target1=$(echo $target | sed -e s,=,,)
559 if [ "$target" = "$target1" ] ; then
560 MAKETARGETS=(${MAKETARGETS[@]} "$target")
562 MAKEVARS=(${MAKEVARS[@]} "$target")
567 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
568 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
569 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
570 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
571 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
572 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
573 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
574 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
575 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
576 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
577 [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
578 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
579 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
581 [ -n "$DRY_RUN" ] && MAILTO=""
583 # elaborate the extra args to be passed to run_log
584 for config in ${TESTCONFIG} ; do
585 RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
589 if [ -n "$OVERBASE" ] ; then
590 sedargs="-e s,@DATE@,${DATE},g"
591 BASE=$(echo ${OVERBASE} | sed $sedargs)
593 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
594 BASE=$(echo ${BASE} | sed $sedargs)
597 ### elaborate mail subject
598 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
600 elif [ -n "$DO_BUILD" ] ; then
601 MAIL_SUBJECT="pkg-only"
602 elif [ -n "$DO_TEST" ] ; then
603 MAIL_SUBJECT="test-only"
605 if [ -n "$OVERBASE" ] ; then
606 MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
608 MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
610 short_hostname=$(hostname | cut -d. -f1)
611 MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
613 ### compute WEBHOST from TESTBUILDURL
614 # this is to avoid having to change the builds configs everywhere
615 # simplistic way to extract hostname from a URL
616 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
618 if ! in_root_context ; then
620 echo "==================== Within LXC BEG $(date)"
622 echo "==================== Within LXC END $(date)"
626 # we run in the root context :
627 # (*) create or check for the vm to use
628 # (*) copy this command in the vm
631 if [ -n "$OVERBASE" ] ; then
632 ### Re-use a vm (finish an unfinished build..)
633 if [ ! -d $(rootdir ${BASE}) ] ; then
634 echo $COMMAND : cannot find vm $BASE
637 # manage LOG - beware it might be a symlink so nuke it first
638 LOG=$(logfile ${BASE})
642 echo "XXXXXXXXXX $COMMAND: using existing vm $BASE" $(date)
643 # start in case e.g. we just rebooted
644 virsh -c lxc:/// start ${BASE} || :
645 # retrieve environment from the previous run
646 FCDISTRO=$(virsh -c lxc:/// lxc-enter-namespace ${BASE} /build/getdistroname.sh)
647 BUILD_SCM_URL=$(virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "make --no-print-directory -C /build stage1=skip +build-GITPATH")
648 # for efficiency, crop everything in one make run
649 tmp=/tmp/${BASE}-env.sh
650 virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "make --no-print-directory -C /build stage1=skip \
651 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT" > $tmp
655 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
656 virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "cd /build; git pull; make tests-clean"
657 # make sure we refresh the tests place in case it has changed
658 rm -f /build/MODULES/tests
659 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
660 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
661 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
662 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
663 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
664 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
667 # create vm: check it does not exist yet
669 while [ -d $(rootdir ${BASE})${i} ] ; do
670 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
671 [ -z ${i} ] && BASE=${BASE}-n
673 if [ $i -gt 100 ] ; then
674 echo "$COMMAND: Failed to create build vm $(rootdir ${BASE})${i}"
680 # manage LOG - beware it might be a symlink so nuke it first
681 LOG=$(logfile ${BASE})
685 echo "XXXXXXXXXX $COMMAND: creating vm $BASE" $(date)
688 ### extract the whole build - much simpler
689 tmpdir=/tmp/$COMMAND-$$
690 GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
691 GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
692 GIT_TAG=${GIT_TAG:-master}
693 mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
697 ./lbuild-initvm.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} ${PREINSTALLED} ${BASE}
701 # Extract build again - in the vm
702 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
703 # xxx not working as of now - waiting for Sapan to look into this
704 virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
706 echo "XXXXXXXXXX $COMMAND: preparation of vm $BASE done" $(date)
708 # The log inside the vm contains everything
709 LOG2=$(rootdir ${BASE})/log.txt
710 (echo "==================== BEG LXC Transcript of vm creation" ; \
712 echo "==================== END LXC Transcript of vm creation" ; \
713 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
714 ### not too nice : nuke the former log, symlink it to the new one
715 rm $LOG; ln -s $LOG2 $LOG
720 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
721 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
722 webpublish mkdir -p ${WEBPATH}
724 # where to store the log for web access
725 WEBBASE=${WEBPATH}/${BASE}
726 WEBLOG=${WEBPATH}/${BASE}/log.txt
727 # compute the log URL - inserted in the mail messages for convenience
728 WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
730 if [ -n "$DO_BUILD" ] ; then
732 # invoke this command into the build directory of the vm
733 cp $COMMANDPATH $(rootdir ${BASE})/build/
735 # invoke this command in the vm for building (-T)
736 virsh -c lxc:/// lxc-enter-namespace ${BASE} /bin/bash -c "chmod +x /build/$COMMAND"
737 virsh -c lxc:/// lxc-enter-namespace ${BASE} /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
740 # publish to the web so run_log can find them
743 webpublish rm -rf $WEBPATH/$BASE
744 # guess if we've been doing any debian-related build
745 if [ ! -f $(rootdir $BASE)/etc/debian_version ] ; then
746 webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
747 webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ $(rootdir $BASE)/build/RPMS/
748 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ $(rootdir $BASE)/build/SRPMS/
750 # run scanpackages so we can use apt-get on this
751 # (not needed on fedora b/c this is done by the regular build already)
752 virsh -c lxc:/// lxc-enter-namespace $BASE /bin/bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
753 webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
754 webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ $(rootdir $BASE)/build/DEBIAN/*.deb
755 webpublish_rsync_files $WEBPATH/$BASE/ $(rootdir $BASE)/build/Packages.gz
757 # publish myplc-release if this exists
758 release=$(rootdir $BASE)/build/myplc-release
759 [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
763 # create yum repo and sign packages.
764 if [ -n "$SIGNYUMREPO" ] ; then
765 # this script does not yet support signing on a remote (webhost) repo
766 sign_here=$(hostname) ; sign_web=$(webpublish hostname)
767 if [ "$hostname" = "$sign_here" ] ; then
770 echo "$COMMAND does not support signing on a remote yum repo"
771 echo "you might want to turn off the -y option, or run this on the web server box itself"
776 if [ -n "$DO_TEST" ] ; then
782 echo "==================== MAIN END $(date)"