3 %define mainstream_version 1.0.2
4 %define module_version_varname mainstream_version
7 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
8 # --without storage-fs --without storage-lvm \
9 # --without polkit --without sasl --without audit --with capng --with udev \
10 # --without netcf --without avahi --without sanlock \
11 # --without xen --without qemu --without hyperv --without phyp --without esx \
13 %define _without_storage_disk true
14 %define _without_storage_iscsi true
15 %define _without_storage_fs true
16 %define _without_storage_lvm true
17 %define _without_polkit true
18 %define _without_sasl true
19 %define _without_audit true
20 #interface requires netcf
21 #%define _without_netcf true
22 %define _without_avahi true
23 %define _without_sanlock true
24 %define _without_xen true
25 %define _without_qemu true
26 %define _without_hyperv true
27 %define _without_phyp true
28 %define _without_esx true
29 %define _without_libxl true
31 # turn this off even on f18 as an attempt to get back /proc/meminfo
32 %define _without_fuse true
34 %define enable_autotools 1
36 # If neither fedora nor rhel was defined, try to guess them from %{dist}
37 %if !0%{?rhel} && !0%{?fedora}
38 %{expand:%(echo "%{?dist}" | \
39 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
40 %{expand:%(echo "%{?dist}" | \
41 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
44 # Default to skipping autoreconf. Distros can change just this one line
45 # (or provide a command-line override) if they backport any patches that
46 # touch configure.ac or Makefile.am.
47 %{!?enable_autotools:%define enable_autotools 0}
49 # A client only build will create a libvirt.so only containing
50 # the generic RPC driver, and test driver and no libvirtd
51 # Default to a full server + client build
54 # Now turn off server build in certain cases
56 # RHEL-5 builds are client-only for s390, ppc
58 %ifnarch %{ix86} x86_64 ia64
63 # Disable all server side drivers if client only build requested
65 %define server_drivers 0
67 %define server_drivers 1
70 # Always build with dlopen'd modules
71 %define with_driver_modules 1
73 # Now set the defaults for all the important features, independent
74 # of any particular OS
76 # First the daemon itself
77 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
78 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
80 # Then the hypervisor drivers that run in libvirtd
81 %define with_xen 0%{!?_without_xen:%{server_drivers}}
82 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
83 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
84 %define with_uml 0%{!?_without_uml:%{server_drivers}}
85 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
87 %define with_qemu_tcg %{with_qemu}
88 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
90 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
92 %define qemu_kvm_arches %{ix86} x86_64
95 %ifarch %{qemu_kvm_arches}
96 %define with_qemu_kvm %{with_qemu}
98 %define with_qemu_kvm 0
101 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
102 %define with_openvz 0%{!?_without_openvz:1}
103 %define with_vbox 0%{!?_without_vbox:1}
104 %define with_vmware 0%{!?_without_vmware:1}
105 %define with_phyp 0%{!?_without_phyp:1}
106 %define with_esx 0%{!?_without_esx:1}
107 %define with_hyperv 0%{!?_without_hyperv:1}
108 %define with_xenapi 0%{!?_without_xenapi:1}
109 %define with_parallels 0%{!?_without_parallels:1}
111 # Then the secondary host drivers, which run inside libvirtd
112 %define with_interface 0%{!?_without_interface:%{server_drivers}}
113 %define with_network 0%{!?_without_network:%{server_drivers}}
114 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
115 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
116 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
117 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
118 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
119 %if 0%{?fedora} >= 16
120 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
122 %define with_storage_rbd 0
124 %if 0%{?fedora} >= 17
125 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
127 %define with_storage_sheepdog 0
129 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
130 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
132 # A few optional bits off by default, we enable later
133 %define with_polkit 0%{!?_without_polkit:0}
134 %define with_capng 0%{!?_without_capng:0}
135 %define with_fuse 0%{!?_without_fuse:0}
136 %define with_netcf 0%{!?_without_netcf:0}
137 %define with_udev 0%{!?_without_udev:0}
138 %define with_hal 0%{!?_without_hal:0}
139 %define with_yajl 0%{!?_without_yajl:0}
140 %define with_nwfilter 0%{!?_without_nwfilter:0}
141 %define with_libpcap 0%{!?_without_libpcap:0}
142 %define with_macvtap 0%{!?_without_macvtap:0}
143 %define with_libnl 0%{!?_without_libnl:0}
144 %define with_audit 0%{!?_without_audit:0}
145 %define with_dtrace 0%{!?_without_dtrace:0}
146 %define with_cgconfig 0%{!?_without_cgconfig:0}
147 %define with_sanlock 0%{!?_without_sanlock:0}
148 %define with_systemd 0%{!?_without_systemd:0}
149 %define with_numad 0%{!?_without_numad:0}
150 %define with_firewalld 0%{!?_without_firewalld:0}
151 %define with_libssh2 0%{!?_without_libssh2:0}
153 # Non-server/HV driver defaults which are always enabled
154 %define with_python 0%{!?_without_python:1}
155 %define with_sasl 0%{!?_without_sasl:1}
158 # Finally set the OS / architecture specific special cases
160 # Xen is available only on i386 x86_64 ia64
161 %ifnarch %{ix86} x86_64 ia64
166 # Numactl is not available on s390[x] and ARM
167 %ifarch s390 s390x %{arm}
168 %define with_numactl 0
171 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
172 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
175 %define with_openvz 0
179 %define with_vmware 0
180 %define with_xenapi 0
182 %define with_hyperv 0
183 %define with_parallels 0
186 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
187 # Fedora has systemd, libvirt still used sysvinit there.
188 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
189 %define with_systemd 1
192 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
193 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
194 %define with_firewalld 1
197 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
199 %define with_qemu_tcg 0
202 %define with_qemu_kvm 0
207 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
208 # on all archs. Other archs all have LXC available though
210 %define with_qemu_tcg 0
213 %define with_qemu_kvm 0
218 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
219 %if 0%{?fedora} && 0%{?fedora} < 16
225 # Fedora doesn't have new enough Xen for libxl until F18
226 %if 0%{?fedora} && 0%{?fedora} < 18
230 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
231 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
232 %define with_polkit 0%{!?_without_polkit:1}
235 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
236 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
237 %define with_capng 0%{!?_without_capng:1}
240 # fuse is used to provide virtualized /proc for LXC
241 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
242 %define with_fuse 0%{!?_without_fuse:1}
245 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
246 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
247 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
250 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
251 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
252 %define with_udev 0%{!?_without_udev:%{server_drivers}}
254 %define with_hal 0%{!?_without_hal:%{server_drivers}}
257 # interface requires netcf
258 %if ! 0%{?with_netcf}
259 %define with_interface 0
262 # Enable yajl library for JSON mode with QEMU
263 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
264 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
267 # Enable sanlock library for lock management with QEMU
268 # Sanlock is available only on i686 x86_64 for RHEL
269 %if 0%{?fedora} >= 16
270 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
273 %ifarch %{ix86} x86_64
274 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
278 # Enable libssh2 transport for new enough distros
279 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
280 %define with_libssh2 0%{!?_without_libssh2:1}
283 # Disable some drivers when building without libvirt daemon.
284 # The logic is the same as in configure.ac
285 %if ! %{with_libvirtd}
286 %define with_interface 0
287 %define with_network 0
293 %define with_storage_fs 0
294 %define with_storage_lvm 0
295 %define with_storage_iscsi 0
296 %define with_storage_mpath 0
297 %define with_storage_rbd 0
298 %define with_storage_sheepdog 0
299 %define with_storage_disk 0
302 %if %{with_qemu} || %{with_lxc} || %{with_uml}
303 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
304 # Enable libpcap library
305 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
306 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
308 # numad is used to manage the CPU and memory placement dynamically,
309 # it's not available on s390[x] and ARM.
310 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
311 %ifnarch s390 s390x %{arm}
312 %define with_numad 0%{!?_without_numad:%{server_drivers}}
321 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
322 %define with_audit 0%{!?_without_audit:1}
325 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
326 %define with_dtrace 1
329 # Pull in cgroups config system
330 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
331 %if %{with_qemu} || %{with_lxc}
332 %define with_cgconfig 0%{!?_without_cgconfig:1}
336 %if %{with_udev} || %{with_hal}
337 %define with_nodedev 1
339 %define with_nodedev 0
342 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
343 %define with_storage 1
345 %define with_storage 0
349 # Force QEMU to run as non-root
350 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
351 %define qemu_user qemu
352 %define qemu_group qemu
354 %define qemu_user root
355 %define qemu_group root
359 # The RHEL-5 Xen package has some feature backports. This
360 # flag is set to enable use of those special bits on RHEL-5
367 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
368 %define with_systemd_macros 1
370 %define with_systemd_macros 0
374 Summary: Library providing a simple virtualization API
376 Version: %{mainstream_version}
379 Group: Development/Libraries
380 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
381 URL: http://libvirt.org/
383 %if %(echo %{version} | grep -o \\. | wc -l) == 3
384 %define mainturl stable_updates/
386 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
387 Patch1: libcurl.patch
388 Patch3: securityselinuxlabeltest.patch
391 Requires: libvirt-daemon = %{version}-%{release}
393 Requires: libvirt-daemon-config-network = %{version}-%{release}
396 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
398 %if %{with_driver_modules}
400 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
403 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
406 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
409 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
412 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
415 %if %{with_interface}
416 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
418 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
419 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
420 Requires: libvirt-daemon-driver-network = %{version}-%{release}
421 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
422 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
425 Requires: libvirt-client = %{version}-%{release}
427 # All build-time requirements. Run-time requirements are
428 # listed against each sub-RPM
429 %if 0%{?enable_autotools}
430 BuildRequires: autoconf
431 BuildRequires: automake
432 BuildRequires: gettext-devel
433 BuildRequires: libtool
435 BuildRequires: python-devel
437 BuildRequires: systemd-units
440 BuildRequires: xen-devel
442 BuildRequires: libxml2-devel
443 BuildRequires: xhtml1-dtds
444 BuildRequires: libxslt
445 BuildRequires: readline-devel
446 BuildRequires: ncurses-devel
447 BuildRequires: gettext
448 BuildRequires: libtasn1-devel
449 BuildRequires: gnutls-devel
450 BuildRequires: libattr-devel
451 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
452 # for augparse, optionally used in testing
453 BuildRequires: augeas
456 BuildRequires: hal-devel
459 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
460 BuildRequires: systemd-devel >= 185
462 BuildRequires: libudev-devel >= 145
464 BuildRequires: libpciaccess-devel >= 0.10.9
467 BuildRequires: yajl-devel
470 # make sure libvirt is built with new enough sanlock on
471 # distros that have it; required for on_lockfailure
472 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
473 BuildRequires: sanlock-devel >= 2.4
475 BuildRequires: sanlock-devel >= 1.8
479 BuildRequires: libpcap-devel
482 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
483 BuildRequires: libnl3-devel
485 BuildRequires: libnl-devel
489 BuildRequires: avahi-devel
492 BuildRequires: libselinux-devel
495 BuildRequires: dnsmasq >= 2.41
496 BuildRequires: iptables
497 BuildRequires: iptables-ipv6
501 BuildRequires: ebtables
503 BuildRequires: module-init-tools
505 BuildRequires: cyrus-sasl-devel
508 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
509 # Only need the binary, not -devel
510 BuildRequires: polkit >= 0.93
512 BuildRequires: PolicyKit-devel >= 0.6
515 %if %{with_storage_fs}
516 # For mount/umount in FS driver
517 BuildRequires: util-linux
521 BuildRequires: /usr/bin/qemu-img
525 BuildRequires: /usr/sbin/qcow-create
528 %if %{with_storage_lvm}
532 %if %{with_storage_iscsi}
534 BuildRequires: iscsi-initiator-utils
536 %if %{with_storage_disk}
538 BuildRequires: parted-devel
540 # Broken RHEL-5 parted RPM is missing a dep
541 BuildRequires: e2fsprogs-devel
544 %if %{with_storage_mpath}
545 # For Multipath support
547 # Broken RHEL-5 packaging has header files in main RPM :-(
548 BuildRequires: device-mapper
550 BuildRequires: device-mapper-devel
552 %if %{with_storage_rbd}
553 BuildRequires: ceph-devel
557 # For QEMU/LXC numa info
558 BuildRequires: numactl-devel
561 BuildRequires: libcap-ng-devel >= 0.5.0
564 BuildRequires: fuse-devel >= 2.8.6
567 %if %{with_phyp} || %{with_libssh2}
568 BuildRequires: libssh2-devel >= 1.3.0
572 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
573 BuildRequires: netcf-devel >= 0.2.2
575 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
576 BuildRequires: netcf-devel >= 0.1.8
578 BuildRequires: netcf-devel >= 0.1.4
583 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
584 BuildRequires: libcurl-devel
586 BuildRequires: curl-devel
590 BuildRequires: libwsman-devel >= 2.2.3
593 BuildRequires: audit-libs-devel
596 # we need /usr/sbin/dtrace
597 BuildRequires: systemtap-sdt-devel
600 %if %{with_storage_fs}
601 # For mount/umount in FS driver
602 BuildRequires: util-linux
603 # For showmount in FS driver (netfs discovery)
604 BuildRequires: nfs-utils
607 %if %{with_firewalld}
608 # Communication with the firewall daemon uses DBus
609 BuildRequires: dbus-devel
612 # Fedora build root suckage
615 # For storage wiping with different algorithms
622 Provides: bundled(gnulib)
625 Libvirt is a C toolkit to interact with the virtualization capabilities
626 of recent versions of Linux (and other OSes). The main package includes
627 the libvirtd server exporting the virtualization support.
630 Summary: API reference and website documentation
631 Group: Development/Libraries
634 Includes the API reference for the libvirt C library, and a complete
635 copy of the libvirt.org website documentation.
639 Summary: Server side daemon and supporting files for libvirt library
640 Group: Development/Libraries
642 # All runtime requirements for the libvirt package (runtime requrements
643 # for subpackages are listed later in those subpackages)
645 # The client side, i.e. shared libs and virsh are in a subpackage
646 Requires: %{name}-client = %{version}-%{release}
648 # for modprobe of pci devices
649 Requires: module-init-tools
650 # for /sbin/ip & /sbin/tc
660 Requires: dnsmasq >= 2.41
663 %if %{with_network} || %{with_nwfilter}
665 Requires: iptables-ipv6
670 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
671 Requires: netcf-libs >= 0.2.2
673 # needed for device enumeration
678 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
679 Requires: systemd >= 185
681 Requires: udev >= 145
685 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
686 Requires: polkit >= 0.93
688 Requires: PolicyKit >= 0.6
691 %if %{with_storage_fs}
695 # For pool-build probing for existing pools
696 BuildRequires: libblkid-devel >= 2.17
698 %if 0%{?fedora} >= 11
699 Requires: glusterfs-client >= 2.0.1
704 Requires: /usr/bin/qemu-img
705 # For image compression
713 Requires: /usr/sbin/qcow-create
716 %if %{with_storage_lvm}
720 %if %{with_storage_iscsi}
722 Requires: iscsi-initiator-utils
724 %if %{with_storage_disk}
727 Requires: device-mapper
729 %if %{with_storage_mpath}
730 # For multipath support
731 Requires: device-mapper
733 %if %{with_storage_sheepdog}
734 # For Sheepdog support
740 %ifarch %{ix86} x86_64 ia64
741 # For virConnectGetSysinfo
744 # For service management
746 Requires(post): systemd-units
747 Requires(post): systemd-sysv
748 Requires(preun): systemd-units
749 Requires(postun): systemd-units
754 # libvirtd depends on 'messagebus' service
758 Server side daemon required to manage the virtualization capabilities
759 of recent versions of Linux. Requires a hypervisor specific sub-RPM
760 for specific drivers.
763 %package daemon-config-network
764 Summary: Default configuration files for the libvirtd daemon
765 Group: Development/Libraries
767 Requires: libvirt-daemon = %{version}-%{release}
769 %description daemon-config-network
770 Default configuration files for setting up NAT based networking
774 %package daemon-config-nwfilter
775 Summary: Network filter configuration files for the libvirtd daemon
776 Group: Development/Libraries
778 Requires: libvirt-daemon = %{version}-%{release}
780 %description daemon-config-nwfilter
781 Network filter configuration files for cleaning guest traffic
784 %if %{with_driver_modules}
786 %package daemon-driver-network
787 Summary: Network driver plugin for the libvirtd daemon
788 Group: Development/Libraries
789 Requires: libvirt-daemon = %{version}-%{release}
791 %description daemon-driver-network
792 The network driver plugin for the libvirtd daemon, providing
793 an implementation of the virtual network APIs using the Linux
799 %package daemon-driver-nwfilter
800 Summary: Nwfilter driver plugin for the libvirtd daemon
801 Group: Development/Libraries
802 Requires: libvirt-daemon = %{version}-%{release}
804 %description daemon-driver-nwfilter
805 The nwfilter driver plugin for the libvirtd daemon, providing
806 an implementation of the firewall APIs using the ebtables,
807 iptables and ip6tables capabilities
812 %package daemon-driver-nodedev
813 Summary: Nodedev driver plugin for the libvirtd daemon
814 Group: Development/Libraries
815 Requires: libvirt-daemon = %{version}-%{release}
817 %description daemon-driver-nodedev
818 The nodedev driver plugin for the libvirtd daemon, providing
819 an implementation of the node device APIs using the udev
824 %if %{with_interface}
825 %package daemon-driver-interface
826 Summary: Interface driver plugin for the libvirtd daemon
827 Group: Development/Libraries
828 Requires: libvirt-daemon = %{version}-%{release}
830 %description daemon-driver-interface
831 The interface driver plugin for the libvirtd daemon, providing
832 an implementation of the network interface APIs using the
837 %package daemon-driver-secret
838 Summary: Secret driver plugin for the libvirtd daemon
839 Group: Development/Libraries
840 Requires: libvirt-daemon = %{version}-%{release}
842 %description daemon-driver-secret
843 The secret driver plugin for the libvirtd daemon, providing
844 an implementation of the secret key APIs.
848 %package daemon-driver-storage
849 Summary: Storage driver plugin for the libvirtd daemon
850 Group: Development/Libraries
851 Requires: libvirt-daemon = %{version}-%{release}
853 %description daemon-driver-storage
854 The storage driver plugin for the libvirtd daemon, providing
855 an implementation of the storage APIs using LVM, iSCSI,
861 %package daemon-driver-qemu
862 Summary: Qemu driver plugin for the libvirtd daemon
863 Group: Development/Libraries
864 Requires: libvirt-daemon = %{version}-%{release}
865 # There really is a hard cross-driver dependency here
866 Requires: libvirt-daemon-driver-network = %{version}-%{release}
868 %description daemon-driver-qemu
869 The qemu driver plugin for the libvirtd daemon, providing
870 an implementation of the hypervisor driver APIs using
876 %package daemon-driver-lxc
877 Summary: LXC driver plugin for the libvirtd daemon
878 Group: Development/Libraries
879 Requires: libvirt-daemon = %{version}-%{release}
880 # There really is a hard cross-driver dependency here
881 Requires: libvirt-daemon-driver-network = %{version}-%{release}
883 %description daemon-driver-lxc
884 The LXC driver plugin for the libvirtd daemon, providing
885 an implementation of the hypervisor driver APIs using
891 %package daemon-driver-uml
892 Summary: Uml driver plugin for the libvirtd daemon
893 Group: Development/Libraries
894 Requires: libvirt-daemon = %{version}-%{release}
896 %description daemon-driver-uml
897 The UML driver plugin for the libvirtd daemon, providing
898 an implementation of the hypervisor driver APIs using
904 %package daemon-driver-xen
905 Summary: Xen driver plugin for the libvirtd daemon
906 Group: Development/Libraries
907 Requires: libvirt-daemon = %{version}-%{release}
909 %description daemon-driver-xen
910 The Xen driver plugin for the libvirtd daemon, providing
911 an implementation of the hypervisor driver APIs using
917 %package daemon-driver-libxl
918 Summary: Libxl driver plugin for the libvirtd daemon
919 Group: Development/Libraries
920 Requires: libvirt-daemon = %{version}-%{release}
922 %description daemon-driver-libxl
923 The Libxl driver plugin for the libvirtd daemon, providing
924 an implementation of the hypervisor driver APIs using
927 %endif # %{with_driver_modules}
933 Summary: Server side daemon & driver required to run QEMU guests
934 Group: Development/Libraries
936 Requires: libvirt-daemon = %{version}-%{release}
937 %if %{with_driver_modules}
938 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
939 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
940 Requires: libvirt-daemon-driver-network = %{version}-%{release}
941 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
942 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
943 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
944 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
948 %description daemon-qemu
949 Server side daemon and driver required to manage the virtualization
950 capabilities of the QEMU TCG emulators
956 Summary: Server side daemon & driver required to run KVM guests
957 Group: Development/Libraries
959 Requires: libvirt-daemon = %{version}-%{release}
960 %if %{with_driver_modules}
961 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
962 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
963 Requires: libvirt-daemon-driver-network = %{version}-%{release}
964 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
965 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
966 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
967 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
971 %description daemon-kvm
972 Server side daemon and driver required to manage the virtualization
973 capabilities of the KVM hypervisor
979 Summary: Server side daemon & driver required to run LXC guests
980 Group: Development/Libraries
982 Requires: libvirt-daemon = %{version}-%{release}
983 %if %{with_driver_modules}
984 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
985 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
986 Requires: libvirt-daemon-driver-network = %{version}-%{release}
987 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
988 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
989 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
990 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
993 %description daemon-lxc
994 Server side daemon and driver required to manage the virtualization
1001 Summary: Server side daemon & driver required to run UML guests
1002 Group: Development/Libraries
1004 Requires: libvirt-daemon = %{version}-%{release}
1005 %if %{with_driver_modules}
1006 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
1007 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1008 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1009 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1010 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1011 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1012 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1014 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1016 %description daemon-uml
1017 Server side daemon and driver required to manage the virtualization
1022 %if %{with_xen} || %{with_libxl}
1024 Summary: Server side daemon & driver required to run XEN guests
1025 Group: Development/Libraries
1027 Requires: libvirt-daemon = %{version}-%{release}
1028 %if %{with_driver_modules}
1030 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1033 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1035 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1036 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1037 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1038 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1039 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1040 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1044 %description daemon-xen
1045 Server side daemon and driver required to manage the virtualization
1048 %endif # %{with_libvirtd}
1051 Summary: Client side library and utilities of the libvirt library
1052 Group: Development/Libraries
1055 # So remote clients can access libvirt over SSH tunnel
1056 # (client invokes 'nc' against the UNIX socket on the server)
1058 # Needed by libvirt-guests init script.
1060 # Needed by virt-pki-validate script.
1061 Requires: gnutls-utils
1062 # Needed for probing the power management features of the host.
1065 Requires: cyrus-sasl
1066 # Not technically required, but makes 'out-of-box' config
1067 # work correctly & doesn't have onerous dependencies
1068 Requires: cyrus-sasl-md5
1072 Shared libraries and client binaries needed to access to the
1073 virtualization capabilities of recent versions of Linux (and other OSes).
1076 Summary: Libraries, includes, etc. to compile with the libvirt library
1077 Group: Development/Libraries
1078 Requires: %{name}-client = %{version}-%{release}
1079 Requires: %{name}-docs = %{version}-%{release}
1083 Include header files & development libraries for the libvirt C library.
1086 %package lock-sanlock
1087 Summary: Sanlock lock manager plugin for QEMU driver
1088 Group: Development/Libraries
1089 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1090 Requires: sanlock >= 2.4
1092 Requires: sanlock >= 1.8
1094 #for virt-sanlock-cleanup require augeas
1096 Requires: %{name}-daemon = %{version}-%{release}
1097 Requires: %{name}-client = %{version}-%{release}
1099 %description lock-sanlock
1100 Includes the Sanlock lock manager plugin for the QEMU
1106 Summary: Python bindings for the libvirt library
1107 Group: Development/Libraries
1108 Requires: %{name}-client = %{version}-%{release}
1111 The libvirt-python package contains a module that permits applications
1112 written in the Python programming language to use the interface
1113 supplied by the libvirt library to use the virtualization capabilities
1114 of recent versions of Linux (and other OSes).
1124 %define _without_xen --without-xen
1128 %define _without_qemu --without-qemu
1131 %if ! %{with_openvz}
1132 %define _without_openvz --without-openvz
1136 %define _without_lxc --without-lxc
1140 %define _without_vbox --without-vbox
1143 %if ! %{with_xenapi}
1144 %define _without_xenapi --without-xenapi
1148 %define _without_libxl --without-libxl
1152 %define _without_sasl --without-sasl
1156 %define _without_avahi --without-avahi
1160 %define _without_phyp --without-phyp
1164 %define _without_esx --without-esx
1167 %if ! %{with_hyperv}
1168 %define _without_hyperv --without-hyperv
1171 %if ! %{with_vmware}
1172 %define _without_vmware --without-vmware
1175 %if ! %{with_parallels}
1176 %define _without_parallels --without-parallels
1179 %if ! %{with_polkit}
1180 %define _without_polkit --without-polkit
1183 %if ! %{with_python}
1184 %define _without_python --without-python
1187 %if ! %{with_libvirtd}
1188 %define _without_libvirtd --without-libvirtd
1192 %define _without_uml --without-uml
1196 %define _with_rhel5_api --with-rhel5-api
1199 %if ! %{with_interface}
1200 %define _without_interface --without-interface
1203 %if ! %{with_network}
1204 %define _without_network --without-network
1207 %if ! %{with_storage_fs}
1208 %define _without_storage_fs --without-storage-fs
1211 %if ! %{with_storage_lvm}
1212 %define _without_storage_lvm --without-storage-lvm
1215 %if ! %{with_storage_iscsi}
1216 %define _without_storage_iscsi --without-storage-iscsi
1219 %if ! %{with_storage_disk}
1220 %define _without_storage_disk --without-storage-disk
1223 %if ! %{with_storage_mpath}
1224 %define _without_storage_mpath --without-storage-mpath
1227 %if ! %{with_storage_rbd}
1228 %define _without_storage_rbd --without-storage-rbd
1231 %if ! %{with_storage_sheepdog}
1232 %define _without_storage_sheepdog --without-storage-sheepdog
1235 %if ! %{with_numactl}
1236 %define _without_numactl --without-numactl
1240 %define _without_numad --without-numad
1244 %define _without_capng --without-capng
1248 %define _without_fuse --without-fuse
1252 %define _without_netcf --without-netcf
1255 %if ! %{with_selinux}
1256 %define _without_selinux --without-selinux
1260 %define _without_hal --without-hal
1264 %define _without_udev --without-udev
1268 %define _without_yajl --without-yajl
1271 %if ! %{with_sanlock}
1272 %define _without_sanlock --without-sanlock
1275 %if ! %{with_libpcap}
1276 %define _without_libpcap --without-libpcap
1279 %if ! %{with_macvtap}
1280 %define _without_macvtap --without-macvtap
1284 %define _without_audit --without-audit
1287 %if ! %{with_dtrace}
1288 %define _without_dtrace --without-dtrace
1291 %if ! %{with_driver_modules}
1292 %define _without_driver_modules --without-driver-modules
1295 %if %{with_firewalld}
1296 %define _with_firewalld --with-firewalld
1299 %define when %(date +"%%F-%%T")
1300 %define where %(hostname)
1301 %define who %{?packager}%{!?packager:Unknown}
1302 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1303 %define with_packager_version --with-packager-version="%{release}"
1306 %define init_scripts --with-init_script=systemd
1308 %define init_scripts --with-init_script=redhat
1311 %if 0%{?enable_autotools}
1316 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1317 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1319 %define with_selinux_mount --with-selinux-mount="/selinux"
1323 %configure %{?_without_xen} \
1325 %{?_without_openvz} \
1328 %{?_without_libxl} \
1329 %{?_without_xenapi} \
1331 %{?_without_avahi} \
1332 %{?_without_polkit} \
1333 %{?_without_python} \
1334 %{?_without_libvirtd} \
1338 %{?_without_hyperv} \
1339 %{?_without_vmware} \
1340 %{?_without_parallels} \
1341 %{?_without_interface} \
1342 %{?_without_network} \
1343 %{?_with_rhel5_api} \
1344 %{?_without_storage_fs} \
1345 %{?_without_storage_lvm} \
1346 %{?_without_storage_iscsi} \
1347 %{?_without_storage_disk} \
1348 %{?_without_storage_mpath} \
1349 %{?_without_storage_rbd} \
1350 %{?_without_storage_sheepdog} \
1351 %{?_without_numactl} \
1352 %{?_without_numad} \
1353 %{?_without_capng} \
1355 %{?_without_netcf} \
1356 %{?_without_selinux} \
1357 %{?_with_selinux_mount} \
1361 %{?_without_sanlock} \
1362 %{?_without_libpcap} \
1363 %{?_without_macvtap} \
1364 %{?_without_audit} \
1365 %{?_without_dtrace} \
1366 %{?_without_driver_modules} \
1367 %{?_with_firewalld} \
1369 %{with_packager_version} \
1370 --with-qemu-user=%{qemu_user} \
1371 --with-qemu-group=%{qemu_group} \
1373 make %{?_smp_mflags}
1379 %makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
1380 for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
1382 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1384 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1385 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1386 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
1387 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
1388 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1389 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1390 %if %{with_driver_modules}
1391 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1392 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1396 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1397 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1398 # because if the admin wants to delete the default network completely, we don't
1399 # want to end up re-incarnating it on every RPM upgrade.
1400 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1401 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1402 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1403 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1404 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1405 # Strip auto-generated UUID - we need it generated per-install
1406 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1408 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1409 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1412 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1413 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1417 %if ! %{with_sanlock}
1418 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1419 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1423 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1424 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1427 %if ! %{with_python}
1428 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
1430 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
1434 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1435 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1438 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1439 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1442 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1445 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
1446 $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
1449 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1450 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1451 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1452 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1453 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1457 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1458 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1467 # These tests don't current work in a mock build root
1468 for i in nodeinfotest seclabeltest
1471 printf 'int main(void) { return 0; }' > $i.c
1472 printf '#!/bin/sh\nexit 0\n' > $i
1477 %if %{with_libvirtd}
1479 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1480 # Normally 'setup' adds this in /etc/passwd, but this is
1481 # here for case of upgrades from earlier Fedora/RHEL. This
1482 # UID/GID pair is reserved for qemu:qemu
1483 getent group kvm >/dev/null || groupadd -g 36 -r kvm
1484 getent group qemu >/dev/null || groupadd -g 107 -r qemu
1485 getent passwd qemu >/dev/null || \
1486 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
1493 # All newly defined networks will have a mac address for the bridge
1494 # auto-generated, but networks already existing at the time of upgrade
1495 # will not. We need to go through all the network configs, look for
1496 # those that don't have a mac address, and add one.
1498 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1499 grep -L "mac address" *.xml; \
1500 cd %{_sysconfdir}/libvirt/qemu/networks && \
1501 grep -L "mac address" *.xml) 2>/dev/null \
1504 for file in $network_files
1506 # each file exists in either the config or state directory (or both) and
1507 # does not have a mac address specified in either. We add the same mac
1508 # address to both files (or just one, if the other isn't there)
1510 mac4=`printf '%X' $(($RANDOM % 256))`
1511 mac5=`printf '%X' $(($RANDOM % 256))`
1512 mac6=`printf '%X' $(($RANDOM % 256))`
1513 for dir in %{_localstatedir}/lib/libvirt/network \
1514 %{_sysconfdir}/libvirt/qemu/networks
1516 if test -f $dir/$file
1519 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1523 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1525 mv -f $dir/$file.orig $dir/$file
1527 rm -f $dir/$file.orig
1535 %if %{with_systemd_macros}
1536 %systemd_post libvirtd.service
1538 if [ $1 -eq 1 ] ; then
1539 # Initial installation
1540 /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
1541 /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
1545 %if %{with_cgconfig}
1546 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1547 # and cgconfig is no longer a necessary service.
1548 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1549 if [ "$1" -eq "1" ]; then
1550 /sbin/chkconfig cgconfig on
1555 /sbin/chkconfig --add libvirtd
1556 if [ "$1" -ge "1" ]; then
1557 /sbin/service libvirtd condrestart > /dev/null 2>&1
1563 %if %{with_systemd_macros}
1564 %systemd_preun libvirtd.service
1566 if [ $1 -eq 0 ] ; then
1567 # Package removal, not upgrade
1568 /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
1569 /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
1570 /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
1571 /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
1576 /sbin/service libvirtd stop 1>/dev/null 2>&1
1577 /sbin/chkconfig --del libvirtd
1583 %if %{with_systemd_macros}
1584 %systemd_postun_with_restart libvirtd.service
1586 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1587 if [ $1 -ge 1 ] ; then
1588 # Package upgrade, not uninstall
1589 /bin/systemctl status virtlockd.service >/dev/null 2>&1
1590 if [ $? = 1 ] ; then
1591 /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
1593 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1599 %post daemon-config-network
1600 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1601 UUID=`/usr/bin/uuidgen`
1602 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1603 < %{_datadir}/libvirt/networks/default.xml \
1604 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1605 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1610 %triggerun -- libvirt < 0.9.4
1611 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1613 # If the package is allowed to autostart:
1614 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1616 # Run these because the SysV package being removed won't do them
1617 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1618 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1620 %endif # %{with_libvirtd}
1625 %if %{with_systemd_macros}
1626 %systemd_preun libvirt-guests.service
1630 /sbin/chkconfig --del libvirt-guests
1631 rm -f /var/lib/libvirt/libvirt-guests
1639 %if %{with_systemd_macros}
1640 %systemd_post libvirt-guests.service
1643 /sbin/chkconfig --add libvirt-guests
1650 %if %{with_systemd_macros}
1651 %systemd_postun_with_restart libvirt-guests.service
1653 %triggerun client -- libvirt < 0.9.4
1654 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1656 # If the package is allowed to autostart:
1657 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1659 # Run these because the SysV package being removed won't do them
1660 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1661 /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
1666 if getent group sanlock > /dev/null ; then
1667 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1668 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1673 %defattr(-, root, root)
1676 %defattr(-, root, root)
1678 %dir %{_datadir}/doc/libvirt-docs-%{version}
1679 %dir %{_datadir}/doc/libvirt-docs-%{version}/html
1680 %{_datadir}/doc/libvirt-docs-%{version}/html/*
1683 %dir %{_datadir}/gtk-doc/html/libvirt/
1684 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1685 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1686 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1687 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1689 %if %{with_libvirtd}
1691 %defattr(-, root, root)
1693 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1694 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1697 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1698 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1699 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1702 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1705 %{_unitdir}/libvirtd.service
1706 %{_unitdir}/virtlockd.service
1707 %{_unitdir}/virtlockd.socket
1709 %{_sysconfdir}/rc.d/init.d/libvirtd
1710 %{_sysconfdir}/rc.d/init.d/virtlockd
1712 %doc daemon/libvirtd.upstart
1713 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1714 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1715 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1716 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1717 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1719 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1720 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1721 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1723 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1726 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1728 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1729 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1730 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1733 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1734 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1737 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1740 %dir %{_datadir}/libvirt/
1743 %dir %{_datadir}/libvirt/networks/
1744 %{_datadir}/libvirt/networks/default.xml
1747 %ghost %dir %{_localstatedir}/run/libvirt/
1749 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1750 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1751 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1752 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1755 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1756 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1757 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1760 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1761 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1764 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1765 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1768 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1769 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1772 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1775 %ghost %dir %{_localstatedir}/run/libvirt/network/
1776 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1777 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1780 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1781 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1784 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1785 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1789 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1790 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1793 %{_datadir}/augeas/lenses/libvirtd.aug
1794 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1795 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1796 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1799 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1800 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1802 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1806 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1809 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1812 %if %{with_storage_disk}
1813 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1816 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1817 %attr(0755, root, root) %{_sbindir}/libvirtd
1818 %attr(0755, root, root) %{_sbindir}/virtlockd
1820 %{_mandir}/man8/libvirtd.8*
1822 %if %{with_driver_modules}
1824 %files daemon-config-network
1825 %defattr(-, root, root)
1828 %if %{with_nwfilter}
1829 %files daemon-config-nwfilter
1830 %defattr(-, root, root)
1831 %{_sysconfdir}/libvirt/nwfilter/*.xml
1834 %if %{with_interface}
1835 %files daemon-driver-interface
1836 %defattr(-, root, root)
1837 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1841 %files daemon-driver-network
1842 %defattr(-, root, root)
1843 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1847 %files daemon-driver-nodedev
1848 %defattr(-, root, root)
1849 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1852 %if %{with_nwfilter}
1853 %files daemon-driver-nwfilter
1854 %defattr(-, root, root)
1855 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1858 %files daemon-driver-secret
1859 %defattr(-, root, root)
1860 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1863 %files daemon-driver-storage
1864 %defattr(-, root, root)
1865 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1869 %files daemon-driver-qemu
1870 %defattr(-, root, root)
1871 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
1875 %files daemon-driver-lxc
1876 %defattr(-, root, root)
1877 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
1881 %files daemon-driver-uml
1882 %defattr(-, root, root)
1883 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
1887 %files daemon-driver-xen
1888 %defattr(-, root, root)
1889 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
1893 %files daemon-driver-libxl
1894 %defattr(-, root, root)
1895 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
1897 %endif # %{with_driver_modules}
1899 %if %{with_qemu_tcg}
1901 %defattr(-, root, root)
1904 %if %{with_qemu_kvm}
1906 %defattr(-, root, root)
1911 %defattr(-, root, root)
1916 %defattr(-, root, root)
1919 %if %{with_xen} || %{with_libxl}
1921 %defattr(-, root, root)
1923 %endif # %{with_libvirtd}
1927 %defattr(-, root, root)
1929 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
1931 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
1932 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
1933 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1934 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
1935 %{_sbindir}/virt-sanlock-cleanup
1936 %{_mandir}/man8/virt-sanlock-cleanup.8*
1937 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
1940 %files client -f %{name}.lang
1941 %defattr(-, root, root)
1942 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1944 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
1945 %{_mandir}/man1/virsh.1*
1946 %{_mandir}/man1/virt-xml-validate.1*
1947 %{_mandir}/man1/virt-pki-validate.1*
1948 %{_mandir}/man1/virt-host-validate.1*
1950 %{_bindir}/virt-xml-validate
1951 %{_bindir}/virt-pki-validate
1952 %{_bindir}/virt-host-validate
1953 %{_libdir}/lib*.so.*
1956 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
1957 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
1958 %{_datadir}/systemtap/tapset/libvirt_functions.stp
1961 %dir %{_datadir}/libvirt/
1962 %dir %{_datadir}/libvirt/schemas/
1964 %{_datadir}/libvirt/schemas/basictypes.rng
1965 %{_datadir}/libvirt/schemas/capability.rng
1966 %{_datadir}/libvirt/schemas/domain.rng
1967 %{_datadir}/libvirt/schemas/domaincommon.rng
1968 %{_datadir}/libvirt/schemas/domainsnapshot.rng
1969 %{_datadir}/libvirt/schemas/interface.rng
1970 %{_datadir}/libvirt/schemas/network.rng
1971 %{_datadir}/libvirt/schemas/networkcommon.rng
1972 %{_datadir}/libvirt/schemas/nodedev.rng
1973 %{_datadir}/libvirt/schemas/nwfilter.rng
1974 %{_datadir}/libvirt/schemas/secret.rng
1975 %{_datadir}/libvirt/schemas/storageencryption.rng
1976 %{_datadir}/libvirt/schemas/storagepool.rng
1977 %{_datadir}/libvirt/schemas/storagevol.rng
1979 %{_datadir}/libvirt/cpu_map.xml
1982 %{_unitdir}/libvirt-guests.service
1984 %{_sysconfdir}/rc.d/init.d/libvirt-guests
1986 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
1987 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
1988 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
1991 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
1995 %defattr(-, root, root)
1998 %dir %{_includedir}/libvirt
1999 %{_includedir}/libvirt/*.h
2000 %{_libdir}/pkgconfig/libvirt.pc
2002 %dir %{_datadir}/libvirt/api/
2003 %{_datadir}/libvirt/api/libvirt-api.xml
2004 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
2005 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
2007 %doc docs/*.html docs/html docs/*.gif
2008 %doc docs/libvirt-api.xml
2009 %doc examples/hellolibvirt
2010 %doc examples/domain-events/events-c
2011 %doc examples/dominfo
2012 %doc examples/domsuspend
2013 %doc examples/openauth
2015 %doc examples/systemtap
2019 %defattr(-, root, root)
2021 %doc AUTHORS NEWS README COPYING.LIB
2022 %{_libdir}/python*/site-packages/libvirt.py*
2023 %{_libdir}/python*/site-packages/libvirt_qemu.py*
2024 %{_libdir}/python*/site-packages/libvirt_lxc.py*
2025 %{_libdir}/python*/site-packages/libvirtmod*
2026 %doc python/tests/*.py
2028 %doc examples/python
2029 %doc examples/domain-events/events-python
2033 * Thu Mar 07 2013 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.0.2-2
2034 - turn off fuse no matter what, as this conflicts with the way procprotect works
2036 * Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
2038 - S390 architecture improvement
2039 - Power architecture improvement
2040 - large Coverity report cleanups and associated bug fixes
2041 - virTypedParams* APIs to helps with those data structures
2042 - a lot of bug fixes and overall improvements
2044 * Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
2045 - virNodeGetCPUMap: Define public API
2046 - Add systemd journal support
2047 - Add a qemu capabilities cache manager
2048 - USB migration support
2049 - various improvement and fixes when using QMP QEmu interface
2050 - Support for Xen 4.2
2051 - Lot of localization enhancements
2052 - a lot of bug fixes, improvements and portability work
2054 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2055 - network: define new API virNetworkUpdate
2056 - add support for QEmu sandbox support
2057 - blockjob: add virDomainBlockCommit
2058 - New APIs to get/set Node memory parameters
2059 - new API virConnectListAllSecrets
2060 - new API virConnectListAllNWFilters
2061 - new API virConnectListAllNodeDevices
2062 - parallels: add support of containers to the driver
2063 - new API virConnectListAllInterfaces
2064 - new API virConnectListAllNetworks
2065 - new API virStoragePoolListAllVolumes
2066 - Add PMSUSPENDED life cycle event
2067 - new API virStorageListAllStoragePools
2068 - Add per-guest S3/S4 state configuration
2069 - qemu: Support for Block Device IO Limits
2070 - a lot of bug fixes, improvements and portability work
2072 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2073 - bugfixes and a brown paper bag
2075 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2076 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2077 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2078 - network: use firewalld instead of iptables, when available
2079 - network: make network driver vlan-aware
2080 - esx: Implement network driver
2081 - driver for parallels hypervisor
2082 - Various LXC improvements
2083 - Add virDomainGetHostname
2084 - a lot of bug fixes, improvements and portability work
2086 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2087 - S390: support for s390(x)
2088 - snapshot: implement new APIs for esx and vbox
2089 - snapshot: new query APIs and many improvements
2090 - virsh: Allow users to reedit rejected XML
2091 - nwfilter: add DHCP snooping
2092 - Enable driver modules in libvirt RPM
2093 - Default to enable driver modules for libvirtd
2094 - storage backend: Add RBD (RADOS Block Device) support
2095 - sVirt support for LXC domains inprovement
2096 - a lot of bug fixes, improvements and portability work
2098 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2099 - qemu: allow snapshotting of sheepdog and rbd disks
2100 - blockjob: add new APIs
2101 - a lot of bug fixes, improvements and portability work
2103 * Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
2104 - Add support for the suspend event
2105 - Add support for event tray moved of removable disks
2106 - qemu: Support numad
2107 - cpustats: API, improvements and qemu support
2108 - qemu: support type='hostdev' network devices at domain start
2109 - Introduce virDomainPMWakeup API
2110 - network: support Open vSwitch
2111 - a number of snapshot improvements
2112 - many improvements and bug fixes
2114 * Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
2115 - Add support for sVirt in the LXC driver
2116 - block rebase: add new API virDomainBlockRebase
2117 - API: Add api to set and get domain metadata
2118 - virDomainGetDiskErrors public API
2119 - conf: add rawio attribute to disk element of domain XML
2120 - Add new public API virDomainGetCPUStats()
2121 - Introduce virDomainPMSuspendForDuration API
2122 - resize: add virStorageVolResize() API
2123 - Add a virt-host-validate command to sanity check HV config
2124 - Add new virDomainShutdownFlags API
2125 - QEMU guest agent support
2126 - many improvements and bug fixes
2128 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2129 - Add API virDomain{S,G}etInterfaceParameters
2130 - Add API virDomain{G, S}etNumaParameters
2131 - Add support for ppc64 qemu
2132 - Support Xen domctl v8
2133 - many improvements and bug fixes
2135 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2136 - Add support for QEMU 1.0
2137 - Add preliminary PPC cpu driver
2138 - Add new API virDomain{Set, Get}BlockIoTune
2139 - block_resize: Define the new API
2140 - Add a public API to invoke suspend/resume on the host
2141 - various improvements for LXC containers
2142 - Define keepalive protocol and add virConnectIsAlive API
2143 - Add support for STP and VLAN filtering
2144 - many improvements and bug fixes
2146 * Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
2147 - esx: support vSphere 5.x
2148 - vbox: support for VirtualBox 4.1
2149 - Introduce the virDomainOpenGraphics API
2150 - Add AHCI support to qemu driver
2151 - snapshot: many improvements and 2 new APIs
2152 - api: Add public api for 'reset'
2153 - many improvements and bug fixes
2155 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2156 - Fix the qemu reboot bug and a few others bug fixes
2158 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2159 - many snapshot improvements (Eric Blake)
2160 - latency: Define new public API and structure (Osier Yang)
2161 - USB2 and various USB improvements (Marc-André Lureau)
2162 - storage: Add fs pool formatting (Osier Yang)
2163 - Add public API for getting migration speed (Jim Fehlig)
2164 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2165 - many improvements and bug fixes
2167 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2168 - network bandwidth QoS control
2169 - Add new API virDomainBlockPull*
2170 - save: new API to manipulate save file images
2171 - CPU bandwidth limits support
2172 - allow to send NMI and key event to guests
2173 - new API virDomainUndefineFlags
2174 - Implement code to attach to external QEMU instances
2175 - bios: Add support for SGA
2176 - various missing python binding
2177 - many improvements and bug fixes
2179 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2180 - new API virDomainGetVcpupinInfo
2181 - Add TXT record support for virtual DNS service
2182 - Support reboots with the QEMU driver
2183 - New API virDomainGetControlInfo API
2184 - New API virNodeGetMemoryStats
2185 - New API virNodeGetCPUTime
2186 - New API for send-key
2187 - New API virDomainPinVcpuFlags
2188 - support multifunction PCI device
2189 - lxc: various improvements
2190 - many improvements and bug fixes
2192 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2193 - Framework for lock manager plugins
2194 - API for network config change transactions
2195 - flags for setting memory parameters
2196 - virDomainGetState public API
2197 - qemu: allow blkstat/blkinfo calls during migration
2198 - Introduce migration v3 API
2199 - Defining the Screenshot public API
2200 - public API for NMI injection
2201 - Various improvements and bug fixes
2203 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2204 - support various persistent domain updates
2205 - improvements on memory APIs
2206 - Add virDomainEventRebootNew
2207 - various improvements to libxl driver
2208 - Spice: support audio, images and stream compression
2209 - Various improvements and bug fixes
2211 * Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2212 - Support cputune cpu usage tuning
2213 - Add public APIs for storage volume upload/download
2214 - Add public API for setting migration speed on the fly
2215 - Add libxenlight driver
2216 - qemu: support migration to fd
2217 - libvirt: add virDomain{Get,Set}BlkioParameters
2218 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2219 - Expose event loop implementation as a public API
2220 - Dump the debug buffer to libvirtd.log on fatal signal
2222 - Various improvements and bug fixes
2224 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2225 - expose new API for sysinfo extraction
2226 - cgroup blkio weight support
2227 - smartcard device support
2228 - qemu: Support per-device boot ordering
2229 - Various improvements and bug fixes
2231 * Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2232 - Preliminary support for VirtualBox 4.0
2234 - Add VMware Workstation and Player driver driver
2235 - Add network disk support
2236 - Various improvements and bug fixes
2238 * Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
2239 - Add support for iSCSI target auto-discovery
2240 - QED: Basic support for QED images
2241 - remote console support
2242 - support for SPICE graphics
2243 - sysinfo and VMBIOS support
2244 - virsh qemu-monitor-command
2245 - various improvements and bug fixes
2247 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2248 - Enable JSON and netdev features in QEMU >= 0.13
2249 - framework for auditing integration
2250 - framework DTrace/SystemTap integration
2251 - Setting the number of vcpu at boot
2252 - Enable support for nested SVM
2253 - Virtio plan9fs filesystem QEMU
2254 - Memory parameter controls
2255 - various improvements and bug fixes
2257 * Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2258 - big improvements to UML driver
2259 - various improvements and bug fixes
2261 * Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
2262 - esx: Support vSphere 4.1
2263 - Qemu arbitrary monitor commands
2264 - Qemu Monitor API entry point
2265 - various improvements and bug fixes
2267 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2268 - phyp: adding support for IVM
2269 - libvirt: introduce domainCreateWithFlags API
2270 - add 802.1Qbh and 802.1Qbg switches handling
2271 - Support for VirtualBox version 3.2
2272 - Init script for handling guests on shutdown/boot
2273 - qemu: live migration with non-shared storage for kvm
2275 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2276 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2277 - Add virDomainGetBlockInfo API to query disk sizing
2278 - a lot of bug fixes and cleanups
2280 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2281 - Snapshotting support (QEmu/VBox/ESX)
2282 - Network filtering API
2284 - new APIs for domain events
2285 - Libvirt managed save API
2286 - timer subselection for domain clock
2288 - API to update guest CPU to host CPU
2289 - virDomainUpdateDeviceFlags new API
2290 - migrate max downtime API
2292 - and many bug fixes
2294 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2296 - async job handling
2298 - computing baseline CPU
2299 - virDomain{Attach,Detach}DeviceFlags
2300 - assorted bug fixes and lots of cleanups
2302 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2304 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2305 - Add new API virDomainMemoryStats
2306 - Public API and domain extension for CPU flags
2307 - vbox: Add support for version 3.1
2308 - Support QEMU's virtual FAT block device driver
2311 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
2312 - udev node device backend
2313 - API to check object properties
2314 - better QEmu monitor processing
2315 - MAC address based port filtering for qemu
2316 - support IPv6 and multiple addresses per interfaces
2319 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2320 - ESX, VBox driver updates
2322 - support for encrypted (qcow) volume
2323 - compressed save image format for Qemu/KVM
2324 - QEmu host PCI device hotplug support
2325 - configuration of huge pages in guests
2328 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2329 - ESX, VBox3, Power Hypervisor drivers
2330 - new net filesystem glusterfs
2331 - Storage cloning for LVM and Disk backends
2332 - interface implementation based on netcf
2333 - Support cgroups in QEMU driver
2334 - QEmu hotplug NIC support
2337 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2340 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2344 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2348 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2351 * Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2354 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2357 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2360 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2363 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2366 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2368 - mostly a few bug fixes from 0.4.3
2370 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2372 - lots of bug fixes and small improvements
2374 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2376 - lots of bug fixes and small improvements
2378 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2382 - lots of assorted improvements, bugfixes and cleanups
2383 - documentation and localization improvements
2385 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2387 - SASL based authentication
2388 - PolicyKit authentication
2389 - improved NUMA and statistics support
2390 - lots of assorted improvements, bugfixes and cleanups
2391 - documentation and localization improvements
2393 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2397 - lots of assorted improvements, bugfixes and cleanups
2398 - documentation and localization improvements
2400 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2402 - API for domains migration
2403 - APIs for collecting statistics on disks and interfaces
2404 - lots of assorted bugfixes and cleanups
2405 - documentation and localization improvements
2407 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2409 - localtime clock support
2410 - PS/2 and USB input devices
2411 - lots of assorted bugfixes and cleanups
2412 - documentation and localization improvements
2414 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2416 - Secure remote access support
2417 - unification of daemons
2418 - lots of assorted bugfixes and cleanups
2419 - documentation and localization improvements
2421 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2423 - lot of assorted bugfixes and cleanups
2424 - support for Xen-3.1
2427 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2429 - lot of assorted bugfixes and cleanups
2430 - preparing for Xen-3.0.5
2432 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2433 - don't require xen; we don't need the daemon and can control non-xen now
2434 - fix scriptlet error (need to own more directories)
2435 - update description text
2437 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2439 - lot of bug and portability fixes
2440 - Add support for network autostart and init scripts
2441 - New API to detect the virtualization capabilities of a host
2442 - Documentation updates
2444 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2445 - Fix loading of guest & network configs
2447 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2448 - Disable kqemu support since its not in Fedora qemu binary
2449 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2451 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2452 - Fixed path to qemu daemon for autostart
2453 - Fixed generation of <features> block in XML
2454 - Pre-create config directory at startup
2456 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2457 - support for KVM and QEmu
2458 - support for network configuration
2461 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2462 - finish inactive Xen domains support
2464 - RelaxNG schemas for XML configs
2466 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2467 - support for inactive Xen domains
2468 - improved support for Xen display and vnc
2470 - localization updates
2472 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
2473 - rebuild against python 2.5
2475 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
2476 - better error reporting
2477 - python bindings fixes and extensions
2478 - add support for shareable drives
2479 - add support for non-bridge style networking
2480 - hot plug device support
2481 - added support for inactive domains
2482 - API to dump core of domains
2483 - various bug fixes, cleanups and improvements
2484 - updated the localization
2486 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
2487 - it's pkgconfig not pgkconfig !
2489 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
2490 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
2491 - Resolves: rhbz#202320
2493 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
2494 - fix missing page size detection code for ia64
2495 - fix mlock size when getting domain info list from hypervisor
2496 - vcpu number initialization
2497 - don't label crashed domains as shut off
2498 - fix virsh man page
2499 - blktapdd support for alternate drivers like blktap
2500 - memory leak fixes (xend interface and XML parsing)
2502 - mlock/munlock size fixes
2504 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
2505 - Fix bug when running against xen-3.0.3 hypercalls
2506 - Fix memory bug when getting vcpus info from xend
2508 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
2509 - Support for localization
2510 - Support for new Xen-3.0.3 cdrom and disk configuration
2511 - Support for setting VNC port
2512 - Fix bug when running against xen-3.0.2 hypercalls
2513 - Fix reconnection problem when talking directly to http xend
2515 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
2516 - patch from danpb to support new-format cd devices for HVM guests
2518 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
2519 - reactivating ia64 support
2521 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
2524 - support for new hypervisor calls
2525 - early code for config files and defined domains
2527 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
2528 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
2530 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
2531 - add patch to support paravirt framebuffer in Xen
2533 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
2534 - another patch to fix network handling in non-HVM guests
2536 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
2537 - patch to fix virParseUUID()
2539 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
2540 - vCPUs and affinity support
2541 - more complete XML, console and boot options
2542 - specific features support
2543 - enforced read-only connections
2544 - various improvements, bug fixes
2546 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
2547 - add patch from pvetere to allow getting uuid from libvirt
2549 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
2552 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
2553 - don't BR xen, we just need xen-devel
2555 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
2556 - need rebuild since libxenstore is now versionned
2558 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
2559 - Add BuildRequires: xen-devel
2561 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
2564 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
2565 - support for HVM Xen guests
2568 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
2569 - added a proxy mechanism for read only access using httpu
2570 - fixed header includes paths
2572 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
2573 - extend and cleanup the driver infrastructure and code
2575 - extend uuid support
2576 - bug fixes, buffer handling cleanups
2577 - support for new Xen hypervisor API
2578 - test driver for unit testing
2579 - virsh --conect argument
2581 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
2583 - new APIs: for Node information and Reboot
2584 - virsh improvements and extensions
2585 - documentation updates and man page
2586 - enhancement and fixes of the XML description format
2588 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
2589 - added error handling APIs
2591 - improve python bindings
2592 - augment documentation and regression tests
2594 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
2595 - new domain creation API
2596 - new UUID based APIs
2597 - more tests, documentation, devhelp
2600 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
2601 - fixes some problems in 0.0.3 due to the change of names
2603 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
2604 - changed library name to libvirt from libvir, complete and test the python
2607 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
2608 - upstream release of 0.0.2, use xend, save and restore added, python bindings
2611 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1