3 %define mainstream_version 1.2.3
4 %define module_version_varname mainstream_version
6 %define packager PlanetLab/OneLab
8 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
9 ## --without storage-fs --without storage-lvm \
10 ## --without polkit --without sasl --without audit --with capng --with udev \
11 ## --without netcf --without avahi --without sanlock \
12 ## --without xen --without qemu --without hyperv --without phyp --without esx \
13 ## --without libxl --without vbox \
14 %define _without_storage_disk true
15 %define _without_storage_iscsi true
16 %define _without_storage_fs true
17 %define _without_storage_lvm true
18 %define _without_polkit true
19 %define _without_sasl true
20 %define _without_audit true
21 %define _without_avahi true
22 %define _without_sanlock true
23 %define _without_xen true
24 %define _without_qemu true
25 %define _without_hyperv true
26 %define _without_phyp true
27 %define _without_esx true
28 %define _without_libxl true
29 %define _without_vbox true
30 %define _without_uml true
32 #turn this off even on f18 as an attempt to get back /proc/meminfo
33 %define _without_fuse true
35 %define enable_autotools 1
37 # If neither fedora nor rhel was defined, try to guess them from %{dist}
38 %if !0%{?rhel} && !0%{?fedora}
39 %{expand:%(echo "%{?dist}" | \
40 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
41 %{expand:%(echo "%{?dist}" | \
42 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
45 # Default to skipping autoreconf. Distros can change just this one line
46 # (or provide a command-line override) if they backport any patches that
47 # touch configure.ac or Makefile.am.
48 %{!?enable_autotools:%define enable_autotools 0}
50 # A client only build will create a libvirt.so only containing
51 # the generic RPC driver, and test driver and no libvirtd
52 # Default to a full server + client build, but with the possibility
53 # of a command-line or ~/.rpmmacros override for client-only.
54 %{!?client_only:%define client_only 0}
56 # Now turn off server build in certain cases
58 # RHEL-5 builds are client-only for s390, ppc
60 %ifnarch %{ix86} x86_64 ia64
65 # Disable all server side drivers if client only build requested
67 %define server_drivers 0
69 %define server_drivers 1
72 # Always build with dlopen'd modules
73 %define with_driver_modules 1
75 # Now set the defaults for all the important features, independent
76 # of any particular OS
78 # First the daemon itself
79 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
80 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
82 # Then the hypervisor drivers that run in libvirtd
83 %define with_xen 0%{!?_without_xen:%{server_drivers}}
84 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
85 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
86 %define with_uml 0%{!?_without_uml:%{server_drivers}}
87 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
88 %define with_vbox 0%{!?_without_vbox:%{server_drivers}}
90 %define with_qemu_tcg %{with_qemu}
91 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
94 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x %{arm}
96 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
99 %define qemu_kvm_arches %{ix86} x86_64
102 %ifarch %{qemu_kvm_arches}
103 %define with_qemu_kvm %{with_qemu}
105 %define with_qemu_kvm 0
108 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
109 %define with_openvz 0%{!?_without_openvz:1}
110 %define with_vmware 0%{!?_without_vmware:1}
111 %define with_phyp 0%{!?_without_phyp:1}
112 %define with_esx 0%{!?_without_esx:1}
113 %define with_hyperv 0%{!?_without_hyperv:1}
114 %define with_xenapi 0%{!?_without_xenapi:1}
115 %define with_parallels 0%{!?_without_parallels:1}
117 # Then the secondary host drivers, which run inside libvirtd
118 %define with_interface 0%{!?_without_interface:%{server_drivers}}
119 %define with_network 0%{!?_without_network:%{server_drivers}}
120 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
121 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
122 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
123 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
124 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
125 %if 0%{?fedora} >= 16
126 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
128 %define with_storage_rbd 0
130 %if 0%{?fedora} >= 17
131 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
133 %define with_storage_sheepdog 0
135 %if 0%{?fedora} >= 19
136 %define with_storage_gluster 0%{!?_without_storage_gluster:%{server_drivers}}
138 %define with_storage_gluster 0
140 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
141 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
143 # Just hardcode to off, since few people ever have apparmor RPMs installed
144 %define with_apparmor 0%{!?_without_apparmor:0}
146 # A few optional bits off by default, we enable later
147 %define with_polkit 0%{!?_without_polkit:0}
148 %define with_capng 0%{!?_without_capng:0}
149 %define with_fuse 0%{!?_without_fuse:0}
150 %define with_netcf 0%{!?_without_netcf:0}
151 %define with_udev 0%{!?_without_udev:0}
152 %define with_hal 0%{!?_without_hal:0}
153 %define with_yajl 0%{!?_without_yajl:0}
154 %define with_nwfilter 0%{!?_without_nwfilter:0}
155 %define with_libpcap 0%{!?_without_libpcap:0}
156 %define with_macvtap 0%{!?_without_macvtap:0}
157 %define with_libnl 0%{!?_without_libnl:0}
158 %define with_audit 0%{!?_without_audit:0}
159 %define with_dtrace 0%{!?_without_dtrace:0}
160 %define with_cgconfig 0%{!?_without_cgconfig:0}
161 %define with_sanlock 0%{!?_without_sanlock:0}
162 %define with_systemd 0%{!?_without_systemd:0}
163 %define with_numad 0%{!?_without_numad:0}
164 %define with_firewalld 0%{!?_without_firewalld:0}
165 %define with_libssh2 0%{!?_without_libssh2:0}
167 # Non-server/HV driver defaults which are always enabled
168 %define with_sasl 0%{!?_without_sasl:1}
171 # Finally set the OS / architecture specific special cases
173 # Xen is available only on i386 x86_64 ia64
174 %ifnarch %{ix86} x86_64 ia64
179 # vbox is available only on i386 x86_64
180 %ifnarch %{ix86} x86_64
184 # Numactl is not available on s390[x] and ARM
185 %ifarch s390 s390x %{arm}
186 %define with_numactl 0
189 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
190 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
193 %define with_openvz 0
197 %define with_vmware 0
198 %define with_xenapi 0
200 %define with_hyperv 0
201 %define with_parallels 0
204 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
205 # Fedora has systemd, libvirt still used sysvinit there.
206 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
207 %define with_systemd 1
210 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
211 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
212 %define with_firewalld 1
215 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
217 %define with_qemu_tcg 0
220 %define with_qemu_kvm 0
225 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
226 # on all archs. Other archs all have LXC available though
228 %define with_qemu_tcg 0
231 %define with_qemu_kvm 0
236 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
237 %if 0%{?fedora} && 0%{?fedora} < 16
243 # Fedora doesn't have new enough Xen for libxl until F18
244 %if 0%{?fedora} && 0%{?fedora} < 18
248 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
249 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
250 %define with_polkit 0%{!?_without_polkit:1}
253 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
254 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
255 %define with_capng 0%{!?_without_capng:1}
258 # fuse is used to provide virtualized /proc for LXC
259 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
260 %define with_fuse 0%{!?_without_fuse:1}
263 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
264 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
265 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
268 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
269 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
270 %define with_udev 0%{!?_without_udev:%{server_drivers}}
272 %define with_hal 0%{!?_without_hal:%{server_drivers}}
275 # Enable yajl library for JSON mode with QEMU
276 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
277 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
280 # Enable sanlock library for lock management with QEMU
281 # Sanlock is available only on i686 x86_64 for RHEL
282 %if 0%{?fedora} >= 16
283 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
286 %ifarch %{ix86} x86_64
287 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
292 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
296 # Enable libssh2 transport for new enough distros
297 %if 0%{?fedora} >= 17
298 %define with_libssh2 0%{!?_without_libssh2:1}
301 # Disable some drivers when building without libvirt daemon.
302 # The logic is the same as in configure.ac
303 %if ! %{with_libvirtd}
304 %define with_interface 0
305 %define with_network 0
311 %define with_storage_fs 0
312 %define with_storage_lvm 0
313 %define with_storage_iscsi 0
314 %define with_storage_mpath 0
315 %define with_storage_rbd 0
316 %define with_storage_sheepdog 0
317 %define with_storage_gluster 0
318 %define with_storage_disk 0
321 %if %{with_qemu} || %{with_lxc} || %{with_uml}
322 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
323 # Enable libpcap library
324 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
325 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
327 # numad is used to manage the CPU and memory placement dynamically,
328 # it's not available on s390[x] and ARM.
329 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
330 %ifnarch s390 s390x %{arm}
331 %define with_numad 0%{!?_without_numad:%{server_drivers}}
340 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
341 %define with_audit 0%{!?_without_audit:1}
344 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
345 %define with_dtrace 1
348 # Pull in cgroups config system
349 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
350 %if %{with_qemu} || %{with_lxc}
351 %define with_cgconfig 0%{!?_without_cgconfig:1}
355 %if %{with_udev} || %{with_hal}
356 %define with_nodedev 1
358 %define with_nodedev 0
361 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
362 %define with_storage 1
364 %define with_storage 0
368 # Force QEMU to run as non-root
369 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
370 %define qemu_user qemu
371 %define qemu_group qemu
373 %define qemu_user root
374 %define qemu_group root
378 # The RHEL-5 Xen package has some feature backports. This
379 # flag is set to enable use of those special bits on RHEL-5
386 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
387 %define with_systemd_macros 1
389 %define with_systemd_macros 0
393 # RHEL releases provide stable tool chains and so it is safe to turn
394 # compiler warning into errors without being worried about frequent
395 # changes in reported warnings
397 %define enable_werror --enable-werror
401 Summary: Library providing a simple virtualization API
403 Version: %{mainstream_version}
406 Group: Development/Libraries
407 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
408 URL: http://libvirt.org/
410 %if %(echo %{version} | grep -o \\. | wc -l) == 3
411 %define mainturl stable_updates/
413 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
414 Patch1: libvirt-1.2.3-bypass-netns-check.patch
417 Requires: libvirt-daemon = %{version}-%{release}
419 Requires: libvirt-daemon-config-network = %{version}-%{release}
422 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
424 %if %{with_driver_modules}
426 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
429 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
432 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
435 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
438 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
441 Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
444 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
447 %if %{with_interface}
448 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
450 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
451 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
452 Requires: libvirt-daemon-driver-network = %{version}-%{release}
453 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
456 Requires: libvirt-client = %{version}-%{release}
458 # All build-time requirements. Run-time requirements are
459 # listed against each sub-RPM
460 %if 0%{?enable_autotools}
461 BuildRequires: autoconf
462 BuildRequires: automake
463 BuildRequires: gettext-devel
464 BuildRequires: libtool
465 BuildRequires: /usr/bin/pod2man
467 BuildRequires: python
469 BuildRequires: systemd-units
471 %if %{with_xen} || %{with_libxl}
472 BuildRequires: xen-devel
474 BuildRequires: libxml2-devel
475 BuildRequires: xhtml1-dtds
476 BuildRequires: libxslt
477 BuildRequires: readline-devel
478 BuildRequires: ncurses-devel
479 BuildRequires: gettext
480 BuildRequires: libtasn1-devel
481 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 19)
482 BuildRequires: libgcrypt-devel
484 BuildRequires: gnutls-devel
485 BuildRequires: libattr-devel
487 # For pool-build probing for existing pools
488 BuildRequires: libblkid-devel >= 2.17
490 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
491 # for augparse, optionally used in testing
492 BuildRequires: augeas
495 BuildRequires: hal-devel
498 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
499 BuildRequires: systemd-devel >= 185
501 BuildRequires: libudev-devel >= 145
503 BuildRequires: libpciaccess-devel >= 0.10.9
506 BuildRequires: yajl-devel
509 # make sure libvirt is built with new enough sanlock on
510 # distros that have it; required for on_lockfailure
511 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
512 BuildRequires: sanlock-devel >= 2.4
514 BuildRequires: sanlock-devel >= 1.8
518 BuildRequires: libpcap-devel
521 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
522 BuildRequires: libnl3-devel
524 BuildRequires: libnl-devel
528 BuildRequires: avahi-devel
531 BuildRequires: libselinux-devel
534 BuildRequires: libapparmor-devel
537 BuildRequires: dnsmasq >= 2.41
538 BuildRequires: iptables
539 BuildRequires: iptables-ipv6
543 BuildRequires: ebtables
545 BuildRequires: module-init-tools
547 BuildRequires: cyrus-sasl-devel
550 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
551 BuildRequires: polkit-devel >= 0.93
553 BuildRequires: PolicyKit-devel >= 0.6
556 %if %{with_storage_fs}
557 # For mount/umount in FS driver
558 BuildRequires: util-linux
562 BuildRequires: /usr/bin/qemu-img
566 BuildRequires: /usr/sbin/qcow-create
569 %if %{with_storage_lvm}
573 %if %{with_storage_iscsi}
575 BuildRequires: iscsi-initiator-utils
577 %if %{with_storage_disk}
579 BuildRequires: parted-devel
581 # Broken RHEL-5 parted RPM is missing a dep
582 BuildRequires: e2fsprogs-devel
585 %if %{with_storage_mpath}
586 # For Multipath support
588 # Broken RHEL-5 packaging has header files in main RPM :-(
589 BuildRequires: device-mapper
591 BuildRequires: device-mapper-devel
593 %if %{with_storage_rbd}
594 BuildRequires: ceph-devel
597 %if %{with_storage_gluster}
598 BuildRequires: glusterfs-api-devel >= 3.4.1
599 BuildRequires: glusterfs-devel >= 3.4.1
602 # For QEMU/LXC numa info
603 BuildRequires: numactl-devel
606 BuildRequires: libcap-ng-devel >= 0.5.0
609 BuildRequires: fuse-devel >= 2.8.6
611 %if %{with_phyp} || %{with_libssh2}
612 BuildRequires: libssh2-devel >= 1.3.0
616 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
617 BuildRequires: netcf-devel >= 0.2.2
619 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
620 BuildRequires: netcf-devel >= 0.1.8
622 BuildRequires: netcf-devel >= 0.1.4
627 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
628 BuildRequires: libcurl-devel
630 BuildRequires: curl-devel
634 BuildRequires: libwsman-devel >= 2.2.3
637 BuildRequires: audit-libs-devel
640 # we need /usr/sbin/dtrace
641 BuildRequires: systemtap-sdt-devel
644 %if %{with_storage_fs}
645 # For mount/umount in FS driver
646 BuildRequires: util-linux
647 # For showmount in FS driver (netfs discovery)
648 BuildRequires: nfs-utils
651 %if %{with_firewalld}
652 # Communication with the firewall daemon uses DBus
653 BuildRequires: dbus-devel
656 # Fedora build root suckage
659 # For storage wiping with different algorithms
666 Provides: bundled(gnulib)
669 Libvirt is a C toolkit to interact with the virtualization capabilities
670 of recent versions of Linux (and other OSes). The main package includes
671 the libvirtd server exporting the virtualization support.
674 Summary: API reference and website documentation
675 Group: Development/Libraries
678 Includes the API reference for the libvirt C library, and a complete
679 copy of the libvirt.org website documentation.
683 Summary: Server side daemon and supporting files for libvirt library
684 Group: Development/Libraries
686 # All runtime requirements for the libvirt package (runtime requrements
687 # for subpackages are listed later in those subpackages)
689 # The client side, i.e. shared libs and virsh are in a subpackage
690 Requires: %{name}-client = %{version}-%{release}
692 # for modprobe of pci devices
693 Requires: module-init-tools
694 # for /sbin/ip & /sbin/tc
704 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
705 Requires: polkit >= 0.93
707 Requires: PolicyKit >= 0.6
713 %ifarch %{ix86} x86_64 ia64
714 # For virConnectGetSysinfo
717 # For service management
719 Requires(post): systemd-units
720 Requires(post): systemd-sysv
721 Requires(preun): systemd-units
722 Requires(postun): systemd-units
727 # libvirtd depends on 'messagebus' service
729 # For uid creation during pre
730 Requires(pre): shadow-utils
733 Server side daemon required to manage the virtualization capabilities
734 of recent versions of Linux. Requires a hypervisor specific sub-RPM
735 for specific drivers.
738 %package daemon-config-network
739 Summary: Default configuration files for the libvirtd daemon
740 Group: Development/Libraries
742 Requires: libvirt-daemon = %{version}-%{release}
743 Requires: libvirt-daemon-driver-network = %{version}-%{release}
745 %description daemon-config-network
746 Default configuration files for setting up NAT based networking
750 %package daemon-config-nwfilter
751 Summary: Network filter configuration files for the libvirtd daemon
752 Group: Development/Libraries
754 Requires: libvirt-daemon = %{version}-%{release}
756 %description daemon-config-nwfilter
757 Network filter configuration files for cleaning guest traffic
760 %if %{with_driver_modules}
762 %package daemon-driver-network
763 Summary: Network driver plugin for the libvirtd daemon
764 Group: Development/Libraries
765 Requires: libvirt-daemon = %{version}-%{release}
766 Requires: dnsmasq >= 2.41
769 Requires: iptables-ipv6
771 %description daemon-driver-network
772 The network driver plugin for the libvirtd daemon, providing
773 an implementation of the virtual network APIs using the Linux
779 %package daemon-driver-nwfilter
780 Summary: Nwfilter driver plugin for the libvirtd daemon
781 Group: Development/Libraries
782 Requires: libvirt-daemon = %{version}-%{release}
784 Requires: iptables-ipv6
787 %description daemon-driver-nwfilter
788 The nwfilter driver plugin for the libvirtd daemon, providing
789 an implementation of the firewall APIs using the ebtables,
790 iptables and ip6tables capabilities
795 %package daemon-driver-nodedev
796 Summary: Nodedev driver plugin for the libvirtd daemon
797 Group: Development/Libraries
798 Requires: libvirt-daemon = %{version}-%{release}
799 # needed for device enumeration
804 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
805 Requires: systemd >= 185
807 Requires: udev >= 145
811 %description daemon-driver-nodedev
812 The nodedev driver plugin for the libvirtd daemon, providing
813 an implementation of the node device APIs using the udev
818 %if %{with_interface}
819 %package daemon-driver-interface
820 Summary: Interface driver plugin for the libvirtd daemon
821 Group: Development/Libraries
822 Requires: libvirt-daemon = %{version}-%{release}
823 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
824 Requires: netcf-libs >= 0.2.2
827 %description daemon-driver-interface
828 The interface driver plugin for the libvirtd daemon, providing
829 an implementation of the network interface APIs using the
834 %package daemon-driver-secret
835 Summary: Secret driver plugin for the libvirtd daemon
836 Group: Development/Libraries
837 Requires: libvirt-daemon = %{version}-%{release}
839 %description daemon-driver-secret
840 The secret driver plugin for the libvirtd daemon, providing
841 an implementation of the secret key APIs.
845 %package daemon-driver-storage
846 Summary: Storage driver plugin for the libvirtd daemon
847 Group: Development/Libraries
848 Requires: libvirt-daemon = %{version}-%{release}
849 %if %{with_storage_fs}
854 %if 0%{?fedora} >= 11
855 Requires: glusterfs-client >= 2.0.1
858 %if %{with_storage_lvm}
862 %if %{with_storage_iscsi}
864 Requires: iscsi-initiator-utils
866 %if %{with_storage_disk}
869 Requires: device-mapper
871 %if %{with_storage_mpath}
872 # For multipath support
873 Requires: device-mapper
875 %if %{with_storage_sheepdog}
876 # For Sheepdog support
881 Requires: /usr/bin/qemu-img
885 Requires: /usr/sbin/qcow-create
889 %description daemon-driver-storage
890 The storage driver plugin for the libvirtd daemon, providing
891 an implementation of the storage APIs using LVM, iSCSI,
897 %package daemon-driver-qemu
898 Summary: Qemu driver plugin for the libvirtd daemon
899 Group: Development/Libraries
900 Requires: libvirt-daemon = %{version}-%{release}
901 # There really is a hard cross-driver dependency here
902 Requires: libvirt-daemon-driver-network = %{version}-%{release}
903 Requires: /usr/bin/qemu-img
904 # For image compression
910 %description daemon-driver-qemu
911 The qemu driver plugin for the libvirtd daemon, providing
912 an implementation of the hypervisor driver APIs using
918 %package daemon-driver-lxc
919 Summary: LXC driver plugin for the libvirtd daemon
920 Group: Development/Libraries
921 Requires: libvirt-daemon = %{version}-%{release}
922 # There really is a hard cross-driver dependency here
923 Requires: libvirt-daemon-driver-network = %{version}-%{release}
925 %description daemon-driver-lxc
926 The LXC driver plugin for the libvirtd daemon, providing
927 an implementation of the hypervisor driver APIs using
933 %package daemon-driver-uml
934 Summary: Uml driver plugin for the libvirtd daemon
935 Group: Development/Libraries
936 Requires: libvirt-daemon = %{version}-%{release}
938 %description daemon-driver-uml
939 The UML driver plugin for the libvirtd daemon, providing
940 an implementation of the hypervisor driver APIs using
946 %package daemon-driver-xen
947 Summary: Xen driver plugin for the libvirtd daemon
948 Group: Development/Libraries
949 Requires: libvirt-daemon = %{version}-%{release}
951 %description daemon-driver-xen
952 The Xen driver plugin for the libvirtd daemon, providing
953 an implementation of the hypervisor driver APIs using
959 %package daemon-driver-vbox
960 Summary: VirtualBox driver plugin for the libvirtd daemon
961 Group: Development/Libraries
962 Requires: libvirt-daemon = %{version}-%{release}
964 %description daemon-driver-vbox
965 The vbox driver plugin for the libvirtd daemon, providing
966 an implementation of the hypervisor driver APIs using
972 %package daemon-driver-libxl
973 Summary: Libxl driver plugin for the libvirtd daemon
974 Group: Development/Libraries
975 Requires: libvirt-daemon = %{version}-%{release}
977 %description daemon-driver-libxl
978 The Libxl driver plugin for the libvirtd daemon, providing
979 an implementation of the hypervisor driver APIs using
982 %endif # %{with_driver_modules}
988 Summary: Server side daemon & driver required to run QEMU guests
989 Group: Development/Libraries
991 Requires: libvirt-daemon = %{version}-%{release}
992 %if %{with_driver_modules}
993 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
994 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
995 Requires: libvirt-daemon-driver-network = %{version}-%{release}
996 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
997 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
998 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
999 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1003 %description daemon-qemu
1004 Server side daemon and driver required to manage the virtualization
1005 capabilities of the QEMU TCG emulators
1009 %if %{with_qemu_kvm}
1011 Summary: Server side daemon & driver required to run KVM guests
1012 Group: Development/Libraries
1014 Requires: libvirt-daemon = %{version}-%{release}
1015 %if %{with_driver_modules}
1016 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
1017 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1018 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1019 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1020 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1021 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1022 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1026 %description daemon-kvm
1027 Server side daemon and driver required to manage the virtualization
1028 capabilities of the KVM hypervisor
1034 Summary: Server side daemon & driver required to run LXC guests
1035 Group: Development/Libraries
1037 Requires: libvirt-daemon = %{version}-%{release}
1038 %if %{with_driver_modules}
1039 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
1040 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1041 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1042 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1043 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1044 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1045 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1048 %description daemon-lxc
1049 Server side daemon and driver required to manage the virtualization
1056 Summary: Server side daemon & driver required to run UML guests
1057 Group: Development/Libraries
1059 Requires: libvirt-daemon = %{version}-%{release}
1060 %if %{with_driver_modules}
1061 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
1062 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1063 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1064 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1065 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1066 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1067 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1069 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1071 %description daemon-uml
1072 Server side daemon and driver required to manage the virtualization
1077 %if %{with_xen} || %{with_libxl}
1079 Summary: Server side daemon & driver required to run XEN guests
1080 Group: Development/Libraries
1082 Requires: libvirt-daemon = %{version}-%{release}
1083 %if %{with_driver_modules}
1085 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1088 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1090 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1091 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1092 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1093 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1094 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1095 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1099 %description daemon-xen
1100 Server side daemon and driver required to manage the virtualization
1105 %package daemon-vbox
1106 Summary: Server side daemon & driver required to run VirtualBox guests
1107 Group: Development/Libraries
1109 Requires: libvirt-daemon = %{version}-%{release}
1110 %if %{with_driver_modules}
1111 Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
1112 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1113 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1114 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1115 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1116 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1117 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1120 %description daemon-vbox
1121 Server side daemon and driver required to manage the virtualization
1122 capabilities of VirtualBox
1124 %endif # %{with_libvirtd}
1127 Summary: Client side library and utilities of the libvirt library
1128 Group: Development/Libraries
1131 # So remote clients can access libvirt over SSH tunnel
1132 # (client invokes 'nc' against the UNIX socket on the server)
1134 # Needed by /usr/libexec/libvirt-guests.sh script.
1136 # Needed by virt-pki-validate script.
1137 Requires: gnutls-utils
1138 # Needed for probing the power management features of the host.
1141 Requires: cyrus-sasl
1142 # Not technically required, but makes 'out-of-box' config
1143 # work correctly & doesn't have onerous dependencies
1144 Requires: cyrus-sasl-md5
1148 Shared libraries and client binaries needed to access to the
1149 virtualization capabilities of recent versions of Linux (and other OSes).
1152 %package login-shell
1153 Summary: Login shell for connecting users to an LXC container
1154 Group: Development/Libraries
1155 Requires: %{name}-client = %{version}-%{release}
1157 %description login-shell
1158 Provides the set-uid virt-login-shell binary that is used to
1159 connect a user to an LXC container when they login, by switching
1164 Summary: Libraries, includes, etc. to compile with the libvirt library
1165 Group: Development/Libraries
1166 Requires: %{name}-client = %{version}-%{release}
1167 Requires: %{name}-docs = %{version}-%{release}
1171 Include header files & development libraries for the libvirt C library.
1174 %package lock-sanlock
1175 Summary: Sanlock lock manager plugin for QEMU driver
1176 Group: Development/Libraries
1177 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1178 Requires: sanlock >= 2.4
1180 Requires: sanlock >= 1.8
1182 #for virt-sanlock-cleanup require augeas
1184 Requires: %{name}-daemon = %{version}-%{release}
1185 Requires: %{name}-client = %{version}-%{release}
1187 %description lock-sanlock
1188 Includes the Sanlock lock manager plugin for the QEMU
1194 %patch1 -p1 -b .bypass-netns-check
1198 %define _without_xen --without-xen
1202 %define _without_qemu --without-qemu
1205 %if ! %{with_openvz}
1206 %define _without_openvz --without-openvz
1210 %define _without_lxc --without-lxc
1214 %define _without_vbox --without-vbox
1217 %if ! %{with_xenapi}
1218 %define _without_xenapi --without-xenapi
1222 %define _without_libxl --without-libxl
1226 %define _without_sasl --without-sasl
1230 %define _without_avahi --without-avahi
1234 %define _without_phyp --without-phyp
1238 %define _without_esx --without-esx
1241 %if ! %{with_hyperv}
1242 %define _without_hyperv --without-hyperv
1245 %if ! %{with_vmware}
1246 %define _without_vmware --without-vmware
1249 %if ! %{with_parallels}
1250 %define _without_parallels --without-parallels
1253 %if ! %{with_polkit}
1254 %define _without_polkit --without-polkit
1257 %if ! %{with_libvirtd}
1258 %define _without_libvirtd --without-libvirtd
1262 %define _without_uml --without-uml
1266 %define _with_rhel5_api --with-rhel5-api
1269 %if ! %{with_interface}
1270 %define _without_interface --without-interface
1273 %if ! %{with_network}
1274 %define _without_network --without-network
1277 %if ! %{with_storage_fs}
1278 %define _without_storage_fs --without-storage-fs
1281 %if ! %{with_storage_lvm}
1282 %define _without_storage_lvm --without-storage-lvm
1285 %if ! %{with_storage_iscsi}
1286 %define _without_storage_iscsi --without-storage-iscsi
1289 %if ! %{with_storage_disk}
1290 %define _without_storage_disk --without-storage-disk
1293 %if ! %{with_storage_mpath}
1294 %define _without_storage_mpath --without-storage-mpath
1297 %if ! %{with_storage_rbd}
1298 %define _without_storage_rbd --without-storage-rbd
1301 %if ! %{with_storage_sheepdog}
1302 %define _without_storage_sheepdog --without-storage-sheepdog
1305 %if ! %{with_storage_gluster}
1306 %define _without_storage_gluster --without-storage-gluster
1309 %if ! %{with_numactl}
1310 %define _without_numactl --without-numactl
1314 %define _without_numad --without-numad
1318 %define _without_capng --without-capng
1322 %define _without_fuse --without-fuse
1326 %define _without_netcf --without-netcf
1329 %if ! %{with_selinux}
1330 %define _without_selinux --without-selinux
1333 %if ! %{with_apparmor}
1334 %define _without_apparmor --without-apparmor
1338 %define _without_hal --without-hal
1342 %define _without_udev --without-udev
1346 %define _without_yajl --without-yajl
1349 %if ! %{with_sanlock}
1350 %define _without_sanlock --without-sanlock
1353 %if ! %{with_libpcap}
1354 %define _without_libpcap --without-libpcap
1357 %if ! %{with_macvtap}
1358 %define _without_macvtap --without-macvtap
1362 %define _without_audit --without-audit
1365 %if ! %{with_dtrace}
1366 %define _without_dtrace --without-dtrace
1369 %if ! %{with_driver_modules}
1370 %define _without_driver_modules --without-driver-modules
1373 %if %{with_firewalld}
1374 %define _with_firewalld --with-firewalld
1377 %define when %(date +"%%F-%%T")
1378 %define where %(hostname)
1379 %define who %{?packager}%{!?packager:Unknown}
1380 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1381 %define with_packager_version --with-packager-version="%{release}"
1384 %define init_scripts --with-init_script=systemd
1386 %define init_scripts --with-init_script=redhat
1390 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1391 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1393 %define with_selinux_mount --with-selinux-mount="/selinux"
1397 # place macros above and build commands below this comment
1399 %if 0%{?enable_autotools}
1403 %configure %{?_without_xen} \
1405 %{?_without_openvz} \
1408 %{?_without_libxl} \
1409 %{?_without_xenapi} \
1411 %{?_without_avahi} \
1412 %{?_without_polkit} \
1413 %{?_without_libvirtd} \
1417 %{?_without_hyperv} \
1418 %{?_without_vmware} \
1419 %{?_without_parallels} \
1420 %{?_without_interface} \
1421 %{?_without_network} \
1422 %{?_with_rhel5_api} \
1423 %{?_without_storage_fs} \
1424 %{?_without_storage_lvm} \
1425 %{?_without_storage_iscsi} \
1426 %{?_without_storage_disk} \
1427 %{?_without_storage_mpath} \
1428 %{?_without_storage_rbd} \
1429 %{?_without_storage_sheepdog} \
1430 %{?_without_storage_gluster} \
1431 %{?_without_numactl} \
1432 %{?_without_numad} \
1433 %{?_without_capng} \
1435 %{?_without_netcf} \
1436 %{?_without_selinux} \
1437 %{?_with_selinux_mount} \
1438 %{?_without_apparmor} \
1442 %{?_without_sanlock} \
1443 %{?_without_libpcap} \
1444 %{?_without_macvtap} \
1445 %{?_without_audit} \
1446 %{?_without_dtrace} \
1447 %{?_without_driver_modules} \
1448 %{?_with_firewalld} \
1450 %{with_packager_version} \
1451 --with-qemu-user=%{qemu_user} \
1452 --with-qemu-group=%{qemu_group} \
1454 --enable-expensive-tests \
1456 make %{?_smp_mflags}
1462 # Avoid using makeinstall macro as it changes prefixes rather than setting
1463 # DESTDIR. Newer make_install macro would be better but it's not available
1464 # on RHEL 5, thus we need to expand it here.
1465 make install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir}
1467 for i in object-events dominfo domsuspend hellolibvirt openauth xml/nwfilter systemtap
1469 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1471 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1472 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1473 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1474 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1475 %if %{with_driver_modules}
1476 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1477 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1481 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1482 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1483 # because if the admin wants to delete the default network completely, we don't
1484 # want to end up re-incarnating it on every RPM upgrade.
1485 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1486 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1487 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1488 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1489 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1490 # Strip auto-generated UUID - we need it generated per-install
1491 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1493 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1494 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1497 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1498 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1502 %if ! %{with_sanlock}
1503 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1504 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1508 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1509 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1513 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1514 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1517 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1518 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1521 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1524 # Copied into libvirt-docs subpackage eventually
1525 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs
1528 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1529 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1530 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1531 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1532 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1536 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1537 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1545 # do not run tests, this is mainstream business, and more importantly
1546 # our own setup is ti build inside a container already and we've seen
1547 # occasional red herrings because of that
1552 # These tests don't current work in a mock build root
1553 for i in nodeinfotest seclabeltest
1556 printf 'int main(void) { return 0; }' > $i.c
1557 printf '#!/bin/sh\nexit 0\n' > $i
1560 if ! make check VIR_TEST_DEBUG=1
1562 cat test-suite.log || true
1566 %if %{with_libvirtd}
1567 %if ! %{with_driver_modules}
1570 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1571 # We want soft static allocation of well-known ids, as disk images
1572 # are commonly shared across NFS mounts by id rather than name; see
1573 # https://fedoraproject.org/wiki/Packaging:UsersAndGroups
1574 getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
1575 getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
1576 if ! getent passwd qemu >/dev/null; then
1577 if ! getent passwd 107 >/dev/null; then
1578 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1580 useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1591 # All newly defined networks will have a mac address for the bridge
1592 # auto-generated, but networks already existing at the time of upgrade
1593 # will not. We need to go through all the network configs, look for
1594 # those that don't have a mac address, and add one.
1596 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1597 grep -L "mac address" *.xml; \
1598 cd %{_sysconfdir}/libvirt/qemu/networks && \
1599 grep -L "mac address" *.xml) 2>/dev/null \
1602 for file in $network_files
1604 # each file exists in either the config or state directory (or both) and
1605 # does not have a mac address specified in either. We add the same mac
1606 # address to both files (or just one, if the other isn't there)
1608 mac4=`printf '%X' $(($RANDOM % 256))`
1609 mac5=`printf '%X' $(($RANDOM % 256))`
1610 mac6=`printf '%X' $(($RANDOM % 256))`
1611 for dir in %{_localstatedir}/lib/libvirt/network \
1612 %{_sysconfdir}/libvirt/qemu/networks
1614 if test -f $dir/$file
1617 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1621 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1623 mv -f $dir/$file.orig $dir/$file
1625 rm -f $dir/$file.orig
1633 %if %{with_systemd_macros}
1634 %systemd_post virtlockd.socket libvirtd.service
1636 if [ $1 -eq 1 ] ; then
1637 # Initial installation
1638 /bin/systemctl enable virtlockd.socket libvirtd.service >/dev/null 2>&1 || :
1642 %if %{with_cgconfig}
1643 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1644 # and cgconfig is no longer a necessary service.
1645 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1646 if [ "$1" -eq "1" ]; then
1647 /sbin/chkconfig cgconfig on
1652 /sbin/chkconfig --add libvirtd
1653 /sbin/chkconfig --add virtlockd
1658 %if %{with_systemd_macros}
1659 %systemd_preun libvirtd.service virtlockd.socket virtlockd.service
1661 if [ $1 -eq 0 ] ; then
1662 # Package removal, not upgrade
1663 /bin/systemctl --no-reload disable libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
1664 /bin/systemctl stop libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
1669 /sbin/service libvirtd stop 1>/dev/null 2>&1
1670 /sbin/chkconfig --del libvirtd
1671 /sbin/service virtlockd stop 1>/dev/null 2>&1
1672 /sbin/chkconfig --del virtlockd
1678 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1679 if [ $1 -ge 1 ] ; then
1680 /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
1681 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1684 if [ $1 -ge 1 ]; then
1685 /sbin/service virtlockd reload > /dev/null 2>&1 || :
1686 /sbin/service libvirtd condrestart > /dev/null 2>&1
1692 %triggerpostun daemon -- libvirt-daemon < 1.2.1
1693 if [ "$1" -ge "1" ]; then
1694 /sbin/service virtlockd reload > /dev/null 2>&1 || :
1695 /sbin/service libvirtd condrestart > /dev/null 2>&1
1700 %post daemon-config-network
1701 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1702 UUID=`/usr/bin/uuidgen`
1703 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1704 < %{_datadir}/libvirt/networks/default.xml \
1705 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1706 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1711 %triggerun -- libvirt < 0.9.4
1712 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1714 # If the package is allowed to autostart:
1715 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1717 # Run these because the SysV package being removed won't do them
1718 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1719 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1722 %if %{with_driver_modules}
1724 %pre daemon-driver-qemu
1725 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1726 # We want soft static allocation of well-known ids, as disk images
1727 # are commonly shared across NFS mounts by id rather than name; see
1728 # https://fedoraproject.org/wiki/Packaging:UsersAndGroups
1729 getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
1730 getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
1731 if ! getent passwd qemu >/dev/null; then
1732 if ! getent passwd 107 >/dev/null; then
1733 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1735 useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
1742 %endif # %{with_libvirtd}
1747 %if %{with_systemd_macros}
1748 %systemd_preun libvirt-guests.service
1752 /sbin/chkconfig --del libvirt-guests
1753 rm -f /var/lib/libvirt/libvirt-guests
1761 %if %{with_systemd_macros}
1762 %systemd_post libvirt-guests.service
1765 /sbin/chkconfig --add libvirt-guests
1772 %if %{with_systemd_macros}
1773 %systemd_postun libvirt-guests.service
1775 %triggerun client -- libvirt < 0.9.4
1776 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1778 # If the package is allowed to autostart:
1779 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1781 # Run this because the SysV package being removed won't do them
1782 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1787 if getent group sanlock > /dev/null ; then
1788 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1789 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1795 getent group virtlogin >/dev/null || groupadd -r virtlogin
1800 %defattr(-, root, root)
1803 %defattr(-, root, root)
1804 %doc AUTHORS ChangeLog.gz NEWS README TODO libvirt-docs/*
1807 %dir %{_datadir}/gtk-doc/html/libvirt/
1808 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1809 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1810 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1811 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1813 %if %{with_libvirtd}
1815 %defattr(-, root, root)
1817 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1819 %if %{with_nwfilter}
1820 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1824 %{_unitdir}/libvirtd.service
1825 %{_unitdir}/virtlockd.service
1826 %{_unitdir}/virtlockd.socket
1828 %{_sysconfdir}/rc.d/init.d/libvirtd
1829 %{_sysconfdir}/rc.d/init.d/virtlockd
1831 %doc daemon/libvirtd.upstart
1832 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1833 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1834 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1835 %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
1836 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1837 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1840 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1841 %dir %{_datadir}/libvirt/
1843 %ghost %dir %{_localstatedir}/run/libvirt/
1845 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1846 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1847 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1848 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1851 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1852 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1854 %{_datadir}/augeas/lenses/libvirtd.aug
1855 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1856 %{_datadir}/augeas/lenses/virtlockd.aug
1857 %{_datadir}/augeas/lenses/tests/test_virtlockd.aug
1858 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1859 ### planetlab: we do not run tests
1860 # %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1863 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1864 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1865 %{_datadir}/polkit-1/actions/org.libvirt.api.policy
1867 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1871 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1873 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1875 %if %{with_apparmor}
1876 %attr(0755, root, root) %{_libexecdir}/virt-aa-helper
1879 %attr(0755, root, root) %{_sbindir}/libvirtd
1880 %attr(0755, root, root) %{_sbindir}/virtlockd
1882 %{_mandir}/man8/libvirtd.8*
1883 %{_mandir}/man8/virtlockd.8*
1885 %if ! %{with_driver_modules}
1887 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1888 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1889 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1890 %dir %{_datadir}/libvirt/networks/
1891 %{_datadir}/libvirt/networks/default.xml
1892 %ghost %dir %{_localstatedir}/run/libvirt/network/
1893 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1894 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1896 %if %{with_storage_disk}
1897 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1900 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1901 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1902 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1903 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1904 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1905 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1906 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
1907 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
1908 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1909 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1910 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1913 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1914 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1915 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1916 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1917 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1918 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1919 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1920 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1923 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1924 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1925 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1926 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1929 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1930 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1931 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1934 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1936 %endif # ! %{with_driver_modules}
1939 %files daemon-config-network
1940 %defattr(-, root, root)
1943 %if %{with_nwfilter}
1944 %files daemon-config-nwfilter
1945 %defattr(-, root, root)
1946 %{_sysconfdir}/libvirt/nwfilter/*.xml
1949 %if %{with_driver_modules}
1950 %if %{with_interface}
1951 %files daemon-driver-interface
1952 %defattr(-, root, root)
1953 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1957 %files daemon-driver-network
1958 %defattr(-, root, root)
1959 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1960 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1961 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1962 %dir %{_datadir}/libvirt/networks/
1963 %{_datadir}/libvirt/networks/default.xml
1964 %ghost %dir %{_localstatedir}/run/libvirt/network/
1965 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1966 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1967 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1971 %files daemon-driver-nodedev
1972 %defattr(-, root, root)
1973 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1976 %if %{with_nwfilter}
1977 %files daemon-driver-nwfilter
1978 %defattr(-, root, root)
1979 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1982 %files daemon-driver-secret
1983 %defattr(-, root, root)
1984 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1987 %files daemon-driver-storage
1988 %defattr(-, root, root)
1989 %if %{with_storage_disk}
1990 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1992 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1996 %files daemon-driver-qemu
1997 %defattr(-, root, root)
1998 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1999 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
2000 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
2001 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
2002 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
2003 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
2004 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
2005 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
2006 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
2007 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
2008 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
2009 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
2013 %files daemon-driver-lxc
2014 %defattr(-, root, root)
2015 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
2016 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
2017 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
2018 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
2019 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
2020 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
2021 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
2022 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
2023 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
2027 %files daemon-driver-uml
2028 %defattr(-, root, root)
2029 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
2030 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
2031 %ghost %dir %{_localstatedir}/run/libvirt/uml/
2032 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
2033 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
2037 %files daemon-driver-xen
2038 %defattr(-, root, root)
2039 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
2040 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
2044 %files daemon-driver-libxl
2045 %defattr(-, root, root)
2046 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
2047 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
2048 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
2049 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
2053 %files daemon-driver-vbox
2054 %defattr(-, root, root)
2055 %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
2057 %endif # %{with_driver_modules}
2059 %if %{with_qemu_tcg}
2061 %defattr(-, root, root)
2064 %if %{with_qemu_kvm}
2066 %defattr(-, root, root)
2071 %defattr(-, root, root)
2076 %defattr(-, root, root)
2079 %if %{with_xen} || %{with_libxl}
2081 %defattr(-, root, root)
2086 %defattr(-, root, root)
2088 %endif # %{with_libvirtd}
2092 %defattr(-, root, root)
2094 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
2096 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
2097 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
2098 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
2099 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
2100 %{_sbindir}/virt-sanlock-cleanup
2101 %{_mandir}/man8/virt-sanlock-cleanup.8*
2102 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
2105 %files client -f %{name}.lang
2106 %defattr(-, root, root)
2107 %doc COPYING COPYING.LESSER
2109 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
2110 %{_mandir}/man1/virsh.1*
2111 %{_mandir}/man1/virt-xml-validate.1*
2112 %{_mandir}/man1/virt-pki-validate.1*
2113 %{_mandir}/man1/virt-host-validate.1*
2115 %{_bindir}/virt-xml-validate
2116 %{_bindir}/virt-pki-validate
2117 %{_bindir}/virt-host-validate
2118 %{_libdir}/lib*.so.*
2121 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
2122 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
2123 %{_datadir}/systemtap/tapset/libvirt_functions.stp
2126 %dir %{_datadir}/libvirt/
2127 %dir %{_datadir}/libvirt/schemas/
2129 %{_datadir}/libvirt/schemas/basictypes.rng
2130 %{_datadir}/libvirt/schemas/capability.rng
2131 %{_datadir}/libvirt/schemas/domain.rng
2132 %{_datadir}/libvirt/schemas/domaincommon.rng
2133 %{_datadir}/libvirt/schemas/domainsnapshot.rng
2134 %{_datadir}/libvirt/schemas/interface.rng
2135 %{_datadir}/libvirt/schemas/network.rng
2136 %{_datadir}/libvirt/schemas/networkcommon.rng
2137 %{_datadir}/libvirt/schemas/nodedev.rng
2138 %{_datadir}/libvirt/schemas/nwfilter.rng
2139 %{_datadir}/libvirt/schemas/secret.rng
2140 %{_datadir}/libvirt/schemas/storageencryption.rng
2141 %{_datadir}/libvirt/schemas/storagefilefeatures.rng
2142 %{_datadir}/libvirt/schemas/storagepool.rng
2143 %{_datadir}/libvirt/schemas/storagevol.rng
2145 %{_datadir}/libvirt/cpu_map.xml
2146 %{_datadir}/libvirt/libvirtLogo.png
2149 %{_unitdir}/libvirt-guests.service
2151 %{_sysconfdir}/rc.d/init.d/libvirt-guests
2153 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
2154 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
2155 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
2158 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
2163 %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
2164 %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
2165 %{_mandir}/man1/virt-login-shell.1*
2169 %defattr(-, root, root)
2172 %dir %{_includedir}/libvirt
2173 %{_includedir}/libvirt/*.h
2174 %{_libdir}/pkgconfig/libvirt.pc
2176 %dir %{_datadir}/libvirt/api/
2177 %{_datadir}/libvirt/api/libvirt-api.xml
2178 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
2179 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
2181 %doc docs/*.html docs/html docs/*.gif
2182 %doc docs/libvirt-api.xml
2183 %doc examples/hellolibvirt
2184 %doc examples/object-events
2185 %doc examples/dominfo
2186 %doc examples/domsuspend
2187 %doc examples/openauth
2189 %doc examples/systemtap
2192 * Fri Mar 21 2014 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.2.1-1
2193 - builds fine on f{18,20}
2195 * Mon Jan 27 2014 Cole Robinson <crobinso@redhat.com> - 1.2.1-2
2196 - Rebuild for openwsman soname bump
2198 * Tue Jan 21 2014 Daniel P. Berrange <berrange@redhat.com> - 1.2.1-1
2199 - Update to 1.2.1 release
2201 * Mon Dec 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.2.0-1
2202 - Update to 1.2.0 release with python in a separate srpm
2204 * Tue Nov 12 2013 Cole Robinson <crobinso@redhat.com> - 1.1.4-2
2205 - virsh nodedev-detach fails if device has no driver (bz #1028629)
2207 * Mon Nov 4 2013 Daniel Veillard <veillard@redhat.com> - 1.1.4-1
2208 - upstream release of 1.1.4
2209 - Add support for AArch64 architecture
2210 - Various improvements on test code and test driver
2211 - a lot of bug fixes and various improvements
2213 * Sun Oct 06 2013 Cole Robinson <crobinso@redhat.com> - 1.1.3-2
2214 - Allow QoS change with update-device (bz #1014200)
2215 - Fix nwfilter crash during firewalld install (bz #1014762)
2216 - Fix crash with nographics (bz #1014088)
2218 * Tue Oct 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.3-1
2219 - VMware: Initial VMware Fusion support and various improvements
2220 - libvirt: add new public API virConnectGetCPUModelNames
2221 - various libxl driver improvements
2222 - LXC many container driver improvement
2223 - ARM cpu improvements
2224 - a lot of bug and leak fixes and various improvements
2226 * Tue Sep 24 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-4
2227 - Fix snapshot restore when VM has disabled usb support (bz #1011520)
2229 * Mon Sep 23 2013 Cole Robinson <crobinso@redhat.com> - 1.1.2-3
2230 - Sync with v1.1.2-maint
2231 - Rebuild for libswan soname bump (bz #1009701)
2232 - CVE-2013-4311: Insecure polkit usage (bz #1009539, bz #1005332)
2233 - CVE-2013-4296: Invalid free memory stats (bz #1006173, bz #1009667)
2234 - CVE-2013-4297: Invalid free in NBDDeviceAssociate (bz #1006505, bz #1006511)
2235 - Fix virsh block-commit abort (bz #1010056)
2237 * Wed Sep 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-2
2238 - Rebuild for soname break in openswman package
2240 * Mon Sep 2 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.2-1
2241 - Update to 1.1.2 release
2243 * Tue Aug 20 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-3
2244 - Fix launching ARM guests on x86 (patches posted upstream, F20 feature)
2246 * Wed Aug 14 2013 Cole Robinson <crobinso@redhat.com> - 1.1.1-2
2247 - CVE-2013-4239: xen: memory corruption in legacy driver (bz #996241, bz
2250 * Tue Jul 30 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.1-1
2251 - Update to 1.1.1 release
2253 * Sun Jul 28 2013 Dennis Gilmore <dennis@ausil.us> - 1.1.0-5
2254 - fix doc path in libvirt-python
2256 * Thu Jul 25 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-4
2257 - CVE-2013-4153: Fix double free of returned JSON (bz #986408, bz #986383)
2258 - CVE-2013-4154: Crash of libvirtd if guest agent not configured (bz #986386,
2261 * Wed Jul 17 2013 Daniel P. Berrange <berrange@redhat.com> - 1.1.0-3
2262 - Rebuild for change in Xen library ABI/soname
2264 * Thu Jul 11 2013 Cole Robinson <crobinso@redhat.com> - 1.1.0-2
2265 - CVE-2013-2230 libvirt: multiple registered events crash
2267 * Mon Jul 1 2013 Daniel Veillard <veillard@redhat.com> - 1.1.0-1
2268 - CVE-2013-2218: Fix crash listing network interfaces with filters
2269 - Fine grained ACL support for the API
2270 - Extensible migration APIs
2271 - various improvements in the Xen driver
2272 - agent based vCPU hotplug support
2273 - various bug fixes and improvements including localizations
2275 * Fri Jun 14 2013 Peter Robinson <pbrobinson@fedoraproject.org> 1.0.6-3
2276 - Enable KVM support on ARM
2278 * Sat Jun 08 2013 Cole Robinson <crobinso@redhat.com> - 1.0.6-2
2279 - Drop bogus dep on vbox
2281 * Mon Jun 3 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.6-1
2282 - Update to 1.0.6 release
2284 * Sun May 19 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5.1-1
2285 - Rebased to version 1.0.5.1
2286 - Follow updated packaging guidelines for user alloc (bz #924501)
2287 - CVE-2013-1962 Open files DoS (bz #963789, bz #953107)
2289 * Tue May 14 2013 Cole Robinson <crobinso@redhat.com> - 1.0.5-3
2290 - Fix stream operations like screenshot (bz #960879)
2292 * Fri May 3 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.5-2
2293 - Fix network driver when using qemu:///session (bz #958907).
2295 * Thu May 2 2013 Daniel Veillard <veillard@redhat.com> - 1.0.5-1
2296 - Update to 1.0.5 release
2297 - add support for NVRAM device
2298 - Add XML config for resource partitions
2299 - Add support for TPM
2300 - NPIV storage migration support
2301 - various bug fixes and improvements including localizations
2303 * Mon Apr 1 2013 Daniel Veillard <veillard@redhat.com> - 1.0.4-1
2304 - Update to 1.0.4 release
2306 * Tue Mar 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.3-1
2307 - Update to 1.0.3 release
2309 * Thu Feb 28 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.2-4
2310 - Backport "qemu: check backing chains even when cgroup is omitted"
2312 - Disable virnettlscontexttest which apparently fails because of
2313 a broken gnutls3. Note since this patch touches Makefile.am, I
2314 have enabled autoreconf (enable_autotools).
2316 * Tue Feb 5 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-2
2317 - Fix missing python binding constants
2319 * Fri Feb 1 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.2-1
2320 - Update to 1.0.2 release
2322 * Tue Jan 29 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-6
2323 - Fix network persistence after define (bz #890492)
2325 * Mon Jan 28 2013 Cole Robinson <crobinso@redhat.com> - 1.0.1-5
2326 - CVE-2013-0170 libvirt: use-after-free in virNetMessageFree() (bz #893450, bz
2329 * Sun Jan 20 2013 Richard W.M. Jones <rjones@redhat.com> - 1.0.1-4
2330 - Rebuild for libnl soname breakage (RHBZ#901569).
2332 * Fri Jan 18 2013 Daniel P. Berrange <berrange@redhat.com> - 1.0.1-3
2333 - Rebuild for libnl3 soname change
2334 - Deal with broken kernel headers
2336 * Mon Dec 17 2012 Cole Robinson <crobinso@redhat.com> - 1.0.1-2
2337 - Fix scriplet warning when uninstalling libvirt-client (bz #888071)
2339 * Mon Dec 17 2012 Daniel Veillard <veillard@redhat.com> - 1.0.1-1
2340 - Update to 1.0.1 release
2342 * Thu Nov 8 2012 Daniel P. Berrange <berrange@redhat.com> - 1.0.0-1
2343 - Update to 1.0.0 release
2345 * Tue Oct 30 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-2
2346 - Disable libxl on F18 too
2348 * Sat Oct 27 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2.1-1
2349 - Rebased to version 0.10.2.1
2350 - Fix lvm volume creation when alloc=0 (bz #866481)
2351 - Clarify virsh send-keys man page example (bz #860004)
2352 - Fix occasional deadlock via virDomainDestroy (bz #859009)
2353 - Fix LXC deadlock from ctrl-c (bz #848119)
2354 - Fix occasional selinux denials with macvtap (bz #798605)
2355 - Fix multilib conflict with systemtap files (bz #831425)
2356 - Don't trigger keytab warning in system logs (bz #745203)
2357 - Fix qemu domxml-2-native NIC model out (bz #636832)
2358 - Fix error message if not enough space for lvm vol (bz #609104)
2360 * Thu Oct 25 2012 Cole Robinson <crobinso@redhat.com> - 0.10.2-4
2361 - Disable libxl driver, since it doesn't build with xen 4.2 in rawhide
2363 * Mon Sep 24 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.2-3
2364 - Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch
2365 NB: This patch is Fedora-specific and not upstream.
2366 - Add upstream patches: don't duplicate environment variables (RHBZ#859596).
2368 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2369 - Upstream release 0.10.2
2370 - network: define new API virNetworkUpdate
2371 - add support for QEmu sandbox support
2372 - blockjob: add virDomainBlockCommit
2373 - New APIs to get/set Node memory parameters
2374 - new API virConnectListAllSecrets
2375 - new API virConnectListAllNWFilters
2376 - new API virConnectListAllNodeDevices
2377 - parallels: add support of containers to the driver
2378 - new API virConnectListAllInterfaces
2379 - new API virConnectListAllNetworks
2380 - new API virStoragePoolListAllVolumes
2381 - Add PMSUSPENDED life cycle event
2382 - new API virStorageListAllStoragePools
2383 - Add per-guest S3/S4 state configuration
2384 - qemu: Support for Block Device IO Limits
2385 - a lot of bug fixes, improvements and portability work
2387 * Fri Sep 21 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-5
2388 - Add (upstream) patches to label sockets for SELinux (RHBZ#853393).
2390 * Thu Sep 13 2012 Richard W.M. Jones <rjones@redhat.com> - 0.10.1-4
2391 - Fix for 32 bit qemu renamed to qemu-system-i386 (RHBZ#857026).
2393 * Wed Sep 12 2012 Cole Robinson <crobinso@redhat.com> - 0.10.1-3
2394 - Fix libvirtd segfault with old netcf-libs (bz 853381)
2395 - Drop unneeded dnsmasq --filterwin2k
2396 - Fix unwanted connection closing, needed for boxes
2398 * Wed Sep 5 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.1-2
2399 - Remove dep on ceph RPM (rhbz #854360)
2401 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2402 - upstream release of 0.10.1
2403 - many fixes from 0.10.0
2405 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2406 - upstream release of 0.10.0
2407 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2408 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2409 - network: use firewalld instead of iptables, when available
2410 - network: make network driver vlan-aware
2411 - esx: Implement network driver
2412 - driver for parallels hypervisor
2413 - Various LXC improvements
2414 - Add virDomainGetHostname
2415 - a lot of bug fixes, improvements and portability work
2417 * Thu Aug 23 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc1
2418 - release candidate 1 of 0.10.0
2420 * Tue Aug 14 2012 Daniel P. Berrange <berrange@redhat.com> - 0.10.0-0rc0.2
2421 - Enable autotools to make previous patch work
2423 * Tue Aug 14 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0.1
2424 - fix security driver missing from the daemon
2426 * Wed Aug 8 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-0rc0
2427 - snapshot before 0.10.0 in a few weeks
2428 - adds the parallel driver support
2430 * Mon Jul 23 2012 Richard W.M. Jones <rjones@redhat.com> - 0.9.13-3
2431 - Add upstream patch to fix RHBZ#842114.
2433 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.9.13-2
2434 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
2436 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2437 - S390: support for s390(x)
2438 - snapshot: implement new APIs for esx and vbox
2439 - snapshot: new query APIs and many improvements
2440 - virsh: Allow users to reedit rejected XML
2441 - nwfilter: add DHCP snooping
2442 - Enable driver modules in libvirt RPM
2443 - Default to enable driver modules for libvirtd
2444 - storage backend: Add RBD (RADOS Block Device) support
2445 - sVirt support for LXC domains inprovement
2446 - a lot of bug fixes, improvements and portability work
2448 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2449 - qemu: allow snapshotting of sheepdog and rbd disks
2450 - blockjob: add new APIs
2451 - a lot of bug fixes, improvements and portability work
2453 * Thu Apr 26 2012 Cole Robinson <crobinso@redhat.com> - 0.9.11.3-1
2454 - Rebased to version 0.9.11.3
2455 - Abide URI username when connecting to hypervisor (bz 811397)
2456 - Fix managed USB mode (bz 814866)
2457 - Fix crash connecting to ESX host (bz 811891)
2459 * Wed Apr 4 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.11-1
2460 - Update to 0.9.11 release
2462 * Tue Apr 3 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-4
2463 - Revert previous change
2465 * Sat Mar 31 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-3
2466 - Refactor RPM spec to allow install without default configs
2468 * Thu Mar 15 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-2
2469 - Rebuild for libparted soname break
2471 * Mon Feb 13 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.10-1
2474 * Thu Jan 12 2012 Daniel P. Berrange <berrange@redhat.com> - 0.9.9-2
2475 - Fix LXC I/O handling
2477 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2478 - Add API virDomain{S,G}etInterfaceParameters
2479 - Add API virDomain{G, S}etNumaParameters
2480 - Add support for ppc64 qemu
2481 - Support Xen domctl v8
2482 - many improvements and bug fixes
2484 * Thu Dec 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.8-2
2485 - Fix install of libvirt-guests.service & libvirtd.service
2487 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2488 - Add support for QEMU 1.0
2489 - Add preliminary PPC cpu driver
2490 - Add new API virDomain{Set, Get}BlockIoTune
2491 - block_resize: Define the new API
2492 - Add a public API to invoke suspend/resume on the host
2493 - various improvements for LXC containers
2494 - Define keepalive protocol and add virConnectIsAlive API
2495 - Add support for STP and VLAN filtering
2496 - many improvements and bug fixes
2498 * Mon Nov 14 2011 Justin M. Forbes <jforbes@redhat.com> - 0.9.7-3
2499 - Remove versioned buildreq for yajl as 2.0.x features are not required.
2501 * Thu Nov 10 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-2
2502 - Rebuild for yajl 2.0.1
2504 * Tue Nov 8 2011 Daniel P. Berrange <berrange@redhat.com> - 0.9.7-1
2505 - Update to 0.9.7 release
2507 * Tue Oct 11 2011 Dan Horák <dan[at]danny.cz> - 0.9.6-3
2508 - xenlight available only on Xen arches (#745020)
2510 * Mon Oct 3 2011 Laine Stump <laine@redhat.com> - 0.9.6-2
2511 - Make PCI multifunction support more manual - Bug 742836
2512 - F15 build still uses cgconfig - Bug 738725
2514 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2515 - Fix the qemu reboot bug and a few others bug fixes
2517 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2518 - many snapshot improvements (Eric Blake)
2519 - latency: Define new public API and structure (Osier Yang)
2520 - USB2 and various USB improvements (Marc-André Lureau)
2521 - storage: Add fs pool formatting (Osier Yang)
2522 - Add public API for getting migration speed (Jim Fehlig)
2523 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2524 - many improvements and bug fixes
2526 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2527 - network bandwidth QoS control
2528 - Add new API virDomainBlockPull*
2529 - save: new API to manipulate save file images
2530 - CPU bandwidth limits support
2531 - allow to send NMI and key event to guests
2532 - new API virDomainUndefineFlags
2533 - Implement code to attach to external QEMU instances
2534 - bios: Add support for SGA
2535 - various missing python binding
2536 - many improvements and bug fixes
2538 * Sat Jul 30 2011 Dan Hor?k <dan[at]danny.cz> - 0.9.3-3
2539 - xenlight available only on Xen arches
2541 * Wed Jul 6 2011 Peter Robinson <pbrobinson@gmail.com> - 0.9.3-2
2542 - Add ARM to NUMA platform excludes
2544 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2545 - new API virDomainGetVcpupinInfo
2546 - Add TXT record support for virtual DNS service
2547 - Support reboots with the QEMU driver
2548 - New API virDomainGetControlInfo API
2549 - New API virNodeGetMemoryStats
2550 - New API virNodeGetCPUTime
2551 - New API for send-key
2552 - New API virDomainPinVcpuFlags
2553 - support multifunction PCI device
2554 - lxc: various improvements
2555 - many improvements and bug fixes
2557 * Wed Jun 29 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.2-3
2558 - Rebuild because of libparted soname bump (libparted.so.0 -> libparted.so.1).
2560 * Tue Jun 21 2011 Laine Stump <laine@redhat.com> - 0.9.2-2
2561 - add rule to require netcf-0.1.8 during build so that new transactional
2562 network change APIs are included.
2563 - document that CVE-2011-2178 has been fixed (by virtue of rebase
2564 to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777)
2566 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2567 - Framework for lock manager plugins
2568 - API for network config change transactions
2569 - flags for setting memory parameters
2570 - virDomainGetState public API
2571 - qemu: allow blkstat/blkinfo calls during migration
2572 - Introduce migration v3 API
2573 - Defining the Screenshot public API
2574 - public API for NMI injection
2575 - Various improvements and bug fixes
2577 * Wed May 25 2011 Richard W.M. Jones <rjones@redhat.com> - 0.9.1-3
2578 - Add upstream patches:
2579 0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch
2580 0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch
2581 0002-remote-remove-bogus-virDomainFree.patch
2582 so that users can try out virt-dmesg.
2583 - Change /var/cache mode to 0711.
2585 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2586 - support various persistent domain updates
2587 - improvements on memory APIs
2588 - Add virDomainEventRebootNew
2589 - various improvements to libxl driver
2590 - Spice: support audio, images and stream compression
2591 - Various improvements and bug fixes
2593 * Thu Apr 7 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2594 - Support cputune cpu usage tuning
2595 - Add public APIs for storage volume upload/download
2596 - Add public API for setting migration speed on the fly
2597 - Add libxenlight driver
2598 - qemu: support migration to fd
2599 - libvirt: add virDomain{Get,Set}BlkioParameters
2600 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2601 - Expose event loop implementation as a public API
2602 - Dump the debug buffer to libvirtd.log on fatal signal
2604 - Various improvements and bug fixes
2606 * Mon Mar 14 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-3
2607 - fix a lack of API check on read-only connections
2610 * Mon Feb 21 2011 Daniel P. Berrange <berrange@redhat.com> - 0.8.8-2
2611 - Fix kernel boot with latest QEMU
2613 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2614 - expose new API for sysinfo extraction
2615 - cgroup blkio weight support
2616 - smartcard device support
2617 - qemu: Support per-device boot ordering
2618 - Various improvements and bug fixes
2620 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.8.7-2
2621 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
2623 * Thu Jan 6 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2624 - Preliminary support for VirtualBox 4.0
2626 - Add VMware Workstation and Player driver driver
2627 - Add network disk support
2628 - Various improvements and bug fixes
2630 - Add support for iSCSI target auto-discovery
2631 - QED: Basic support for QED images
2632 - remote console support
2633 - support for SPICE graphics
2634 - sysinfo and VMBIOS support
2635 - virsh qemu-monitor-command
2636 - various improvements and bug fixes
2638 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2639 - Enable JSON and netdev features in QEMU >= 0.13
2640 - framework for auditing integration
2641 - framework DTrace/SystemTap integration
2642 - Setting the number of vcpu at boot
2643 - Enable support for nested SVM
2644 - Virtio plan9fs filesystem QEMU
2645 - Memory parameter controls
2646 - various improvements and bug fixes
2648 * Wed Sep 29 2010 jkeating - 0.8.4-3
2649 - Rebuilt for gcc bug 634757
2651 * Thu Sep 16 2010 Dan Horák <dan[at]danny.cz> - 0.8.4-2
2652 - disable the nwfilterxml2xmltest also on s390(x)
2654 * Mon Sep 13 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2655 - Upstream release 0.8.4
2657 * Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-2
2658 - Fix potential overflow in boot menu code
2660 * Mon Aug 23 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.3-1
2661 - Upstream release 0.8.3
2663 * Wed Jul 21 2010 David Malcolm <dmalcolm@redhat.com> - 0.8.2-3
2664 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
2666 * Mon Jul 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.8.2-2
2667 - CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores
2668 - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk
2669 image backing stores
2670 - CVE-2010-2239 not setting user defined backing store format when creating new image
2671 - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for
2672 obtaining privileged resources on the host
2674 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2675 - Upstream release 0.8.2
2676 - phyp: adding support for IVM
2677 - libvirt: introduce domainCreateWithFlags API
2678 - add 802.1Qbh and 802.1Qbg switches handling
2679 - Support for VirtualBox version 3.2
2680 - Init script for handling guests on shutdown/boot
2681 - qemu: live migration with non-shared storage for kvm
2683 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2684 - Upstream release 0.8.1
2685 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2686 - Add virDomainGetBlockInfo API to query disk sizing
2687 - a lot of bug fixes and cleanups
2689 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2690 - Upstream release 0.8.0
2691 - Snapshotting support (QEmu/VBox/ESX)
2692 - Network filtering API
2694 - new APIs for domain events
2695 - Libvirt managed save API
2696 - timer subselection for domain clock
2698 - API to update guest CPU to host CPU
2699 - virDomainUpdateDeviceFlags new API
2700 - migrate max downtime API
2702 - and many bug fixes
2704 * Tue Mar 30 2010 Richard W.M. Jones <rjones@redhat.com> - 0.7.7-3.fc14
2705 - No change, just rebuild against new libparted with bumped soname.
2707 * Mon Mar 22 2010 Cole Robinson <crobinso@redhat.com> - 0.7.7-2.fc14
2708 - Fix USB devices by product with security enabled (bz 574136)
2709 - Set kernel/initrd in security driver, fixes some URL installs (bz 566425)
2711 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2713 - async job handling
2715 - computing baseline CPU
2716 - virDomain{Attach,Detach}DeviceFlags
2717 - assorted bug fixes and lots of cleanups
2719 * Tue Feb 16 2010 Adam Jackson <ajax@redhat.com> 0.7.6-2
2720 - libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed
2721 - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so
2723 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2724 - upstream release of 0.7.6
2725 - Use QEmu new device adressing when possible
2726 - Implement CPU topology support for QEMU driver
2727 - Implement SCSI controller hotplug/unplug for QEMU
2728 - Implement support for multi IQN
2729 - a lot of fixes and improvements
2731 * Thu Jan 14 2010 Chris Weyl <cweyl@alumni.drew.edu> 0.7.5-3
2732 - bump for libssh2 rebuild
2734 * Tue Jan 12 2010 Daniel P. Berrange <berrange@redhat.com> - 0.7.5-2
2735 - Rebuild for libparted soname change
2737 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2738 - Add new API virDomainMemoryStats
2739 - Public API and domain extension for CPU flags
2740 - vbox: Add support for version 3.1
2741 - Support QEMU's virtual FAT block device driver
2744 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.4-1
2745 - upstream release of 0.7.4
2746 - udev node device backend
2747 - API to check object properties
2748 - better QEmu monitor processing
2749 - MAC address based port filtering for qemu
2750 - support IPv6 and multiple addresses per interfaces
2753 * Thu Nov 19 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-6
2754 - Really fix restore file labelling this time
2756 * Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-5
2757 - Disable numactl on s390[x]. Again.
2759 * Wed Nov 11 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.2-4
2760 - Fix QEMU save/restore permissions / labelling
2762 * Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-3
2763 - Avoid compressing small log files (#531030)
2765 * Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.2-2
2766 - Make libvirt-devel require libvirt-client, not libvirt
2767 - Fix qemu machine types handling
2769 * Wed Oct 14 2009 Daniel Veillard <veillard@redhat.com> - 0.7.2-1
2770 - Upstream release of 0.7.2
2771 - Allow to define ESX domains
2772 - Allows suspend and resulme of LXC domains
2773 - API for data streams
2776 * Tue Oct 13 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-12
2777 - Fix restore of qemu guest using raw save format (#523158)
2779 * Fri Oct 9 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-11
2780 - Fix libvirtd memory leak during error reply sending (#528162)
2781 - Add several PCI hot-unplug typo fixes from upstream
2783 * Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-10
2784 - Create /var/log/libvirt/{lxc,uml} dirs for logrotate
2785 - Make libvirt-python dependon on libvirt-client
2786 - Sync misc minor changes from upstream spec
2788 * Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-9
2789 - Change logrotate config to weekly (#526769)
2791 * Thu Oct 1 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-8
2792 - Disable sound backend, even when selinux is disabled (#524499)
2793 - Re-label qcow2 backing files (#497131)
2795 * Wed Sep 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-7
2796 - Fix USB device passthrough (#522683)
2798 * Mon Sep 21 2009 Chris Weyl <cweyl@alumni.drew.edu> - 0.7.1-6
2799 - rebuild for libssh2 1.2
2801 * Mon Sep 21 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-5
2802 - Don't set a bogus error in virDrvSupportsFeature()
2803 - Fix raw save format
2805 * Thu Sep 17 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-4
2806 - A couple of hot-unplug memory handling fixes (#523953)
2808 * Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-3
2809 - disable numactl on s390[x]
2811 * Thu Sep 17 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-2
2812 - revamp of spec file for modularity and RHELs
2814 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2815 - Upstream release of 0.7.1
2816 - ESX, VBox driver updates
2818 - support for encrypted (qcow) volume
2819 - compressed save image format for Qemu/KVM
2820 - QEmu host PCI device hotplug support
2821 - configuration of huge pages in guests
2824 * Mon Sep 14 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.2.gitfac3f4c
2825 - Update to newer snapshot of 0.7.1
2826 - Stop libvirt using untrusted 'info vcpus' PID data (#520864)
2827 - Support relabelling of USB and PCI devices
2828 - Enable multipath storage support
2829 - Restart libvirtd upon RPM upgrade
2831 * Sun Sep 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-0.1.gitg3ef2e05
2832 - Update to pre-release git snapshot of 0.7.1
2833 - Drop upstreamed patches
2835 * Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-6
2836 - Fix migration completion with newer versions of qemu (#516187)
2838 * Wed Aug 19 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-5
2839 - Add PCI host device hotplug support
2840 - Allow PCI bus reset to reset other devices (#499678)
2841 - Fix stupid PCI reset error message (bug #499678)
2842 - Allow PM reset on multi-function PCI devices (bug #515689)
2843 - Re-attach PCI host devices after guest shuts down (bug #499561)
2844 - Fix list corruption after disk hot-unplug
2845 - Fix minor 'virsh nodedev-list --tree' annoyance
2847 * Thu Aug 13 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.0-4
2848 - Rewrite policykit support (rhbz #499970)
2849 - Log and ignore NUMA topology problems (rhbz #506590)
2851 * Mon Aug 10 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-3
2852 - Don't fail to start network if ipv6 modules is not loaded (#516497)
2854 * Thu Aug 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-2
2855 - Make sure qemu can access kernel/initrd (bug #516034)
2856 - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)
2858 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2859 - ESX, VBox3, Power Hypervisor drivers
2860 - new net filesystem glusterfs
2861 - Storage cloning for LVM and Disk backends
2862 - interface implementation based on netcf
2863 - Support cgroups in QEMU driver
2864 - QEmu hotplug NIC support
2867 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2870 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2874 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2878 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2881 * Wed Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2884 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2887 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2890 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2893 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2896 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2898 - mostly a few bug fixes from 0.4.3
2900 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2902 - lots of bug fixes and small improvements
2904 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2906 - lots of bug fixes and small improvements
2908 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2912 - lots of assorted improvements, bugfixes and cleanups
2913 - documentation and localization improvements
2915 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2917 - SASL based authentication
2918 - PolicyKit authentication
2919 - improved NUMA and statistics support
2920 - lots of assorted improvements, bugfixes and cleanups
2921 - documentation and localization improvements
2923 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2927 - lots of assorted improvements, bugfixes and cleanups
2928 - documentation and localization improvements
2930 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2932 - API for domains migration
2933 - APIs for collecting statistics on disks and interfaces
2934 - lots of assorted bugfixes and cleanups
2935 - documentation and localization improvements
2937 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2939 - localtime clock support
2940 - PS/2 and USB input devices
2941 - lots of assorted bugfixes and cleanups
2942 - documentation and localization improvements
2944 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2946 - Secure remote access support
2947 - unification of daemons
2948 - lots of assorted bugfixes and cleanups
2949 - documentation and localization improvements
2951 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2953 - lot of assorted bugfixes and cleanups
2954 - support for Xen-3.1
2957 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2959 - lot of assorted bugfixes and cleanups
2960 - preparing for Xen-3.0.5
2962 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2963 - don't require xen; we don't need the daemon and can control non-xen now
2964 - fix scriptlet error (need to own more directories)
2965 - update description text
2967 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2969 - lot of bug and portability fixes
2970 - Add support for network autostart and init scripts
2971 - New API to detect the virtualization capabilities of a host
2972 - Documentation updates
2974 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2975 - Fix loading of guest & network configs
2977 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2978 - Disable kqemu support since its not in Fedora qemu binary
2979 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2981 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2982 - Fixed path to qemu daemon for autostart
2983 - Fixed generation of <features> block in XML
2984 - Pre-create config directory at startup
2986 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2987 - support for KVM and QEmu
2988 - support for network configuration
2991 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2992 - finish inactive Xen domains support
2994 - RelaxNG schemas for XML configs
2996 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2997 - support for inactive Xen domains
2998 - improved support for Xen display and vnc
3000 - localization updates
3002 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
3003 - rebuild against python 2.5
3005 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
3006 - better error reporting
3007 - python bindings fixes and extensions
3008 - add support for shareable drives
3009 - add support for non-bridge style networking
3010 - hot plug device support
3011 - added support for inactive domains
3012 - API to dump core of domains
3013 - various bug fixes, cleanups and improvements
3014 - updated the localization
3016 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
3017 - it's pkgconfig not pgkconfig !
3019 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
3020 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
3021 - Resolves: rhbz#202320
3023 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
3024 - fix missing page size detection code for ia64
3025 - fix mlock size when getting domain info list from hypervisor
3026 - vcpu number initialization
3027 - don't label crashed domains as shut off
3028 - fix virsh man page
3029 - blktapdd support for alternate drivers like blktap
3030 - memory leak fixes (xend interface and XML parsing)
3032 - mlock/munlock size fixes
3034 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
3035 - Fix bug when running against xen-3.0.3 hypercalls
3036 - Fix memory bug when getting vcpus info from xend
3038 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
3039 - Support for localization
3040 - Support for new Xen-3.0.3 cdrom and disk configuration
3041 - Support for setting VNC port
3042 - Fix bug when running against xen-3.0.2 hypercalls
3043 - Fix reconnection problem when talking directly to http xend
3045 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
3046 - patch from danpb to support new-format cd devices for HVM guests
3048 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
3049 - reactivating ia64 support
3051 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
3054 - support for new hypervisor calls
3055 - early code for config files and defined domains
3057 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
3058 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
3060 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
3061 - add patch to support paravirt framebuffer in Xen
3063 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
3064 - another patch to fix network handling in non-HVM guests
3066 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
3067 - patch to fix virParseUUID()
3069 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
3070 - vCPUs and affinity support
3071 - more complete XML, console and boot options
3072 - specific features support
3073 - enforced read-only connections
3074 - various improvements, bug fixes
3076 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
3077 - add patch from pvetere to allow getting uuid from libvirt
3079 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
3082 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
3083 - don't BR xen, we just need xen-devel
3085 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
3086 - need rebuild since libxenstore is now versionned
3088 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
3089 - Add BuildRequires: xen-devel
3091 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
3094 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
3095 - support for HVM Xen guests
3098 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
3099 - added a proxy mechanism for read only access using httpu
3100 - fixed header includes paths
3102 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
3103 - extend and cleanup the driver infrastructure and code
3105 - extend uuid support
3106 - bug fixes, buffer handling cleanups
3107 - support for new Xen hypervisor API
3108 - test driver for unit testing
3109 - virsh --conect argument
3111 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
3113 - new APIs: for Node information and Reboot
3114 - virsh improvements and extensions
3115 - documentation updates and man page
3116 - enhancement and fixes of the XML description format
3118 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
3119 - added error handling APIs
3121 - improve python bindings
3122 - augment documentation and regression tests
3124 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
3125 - new domain creation API
3126 - new UUID based APIs
3127 - more tests, documentation, devhelp
3130 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
3131 - fixes some problems in 0.0.3 due to the change of names
3133 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
3134 - changed library name to libvirt from libvir, complete and test the python
3137 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
3138 - upstream release of 0.0.2, use xend, save and restore added, python bindings
3141 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1