2 * Copyright (c) 2009, 2010, 2011, 2012, 2013 Nicira, Inc.
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at:
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
17 #ifndef OFPROTO_OFPROTO_PROVIDER_H
18 #define OFPROTO_OFPROTO_PROVIDER_H 1
20 /* Definitions for use within ofproto.
26 * Lots of ofproto data structures are only accessed from a single thread.
27 * Those data structures are generally not thread-safe.
29 * The ofproto-dpif ofproto implementation accesses the flow table from
30 * multiple threads, including modifying the flow table from multiple threads
31 * via the "learn" action, so the flow table and various structures that index
32 * it have been made thread-safe. Refer to comments on individual data
33 * structures for details.
37 #include "classifier.h"
38 #include "guarded-list.h"
42 #include "ofp-errors.h"
44 #include "ofproto/ofproto.h"
45 #include "ovs-atomic.h"
46 #include "ovs-thread.h"
53 struct ofputil_flow_mod;
57 extern struct ovs_mutex ofproto_mutex;
59 /* An OpenFlow switch.
61 * With few exceptions, ofproto implementations may look at these fields but
62 * should not modify them. */
64 struct hmap_node hmap_node; /* In global 'all_ofprotos' hmap. */
65 const struct ofproto_class *ofproto_class;
66 char *type; /* Datapath type. */
67 char *name; /* Datapath name. */
70 uint64_t fallback_dpid; /* Datapath ID if no better choice found. */
71 uint64_t datapath_id; /* Datapath ID. */
72 bool forward_bpdu; /* Option to allow forwarding of BPDU frames
73 * when NORMAL action is invoked. */
74 char *mfr_desc; /* Manufacturer (NULL for default)b. */
75 char *hw_desc; /* Hardware (NULL for default). */
76 char *sw_desc; /* Software version (NULL for default). */
77 char *serial_desc; /* Serial number (NULL for default). */
78 char *dp_desc; /* Datapath description (NULL for default). */
79 enum ofp_config_flags frag_handling; /* One of OFPC_*. */
82 struct hmap ports; /* Contains "struct ofport"s. */
83 struct shash port_by_name;
84 struct simap ofp_requests; /* OpenFlow port number requests. */
85 uint16_t alloc_port_no; /* Last allocated OpenFlow port number. */
86 uint16_t max_ports; /* Max possible OpenFlow port num, plus one. */
87 struct hmap ofport_usage; /* Map ofport to last used time. */
88 uint64_t change_seq; /* Change sequence for netdev status. */
91 long long int eviction_group_timer; /* For rate limited reheapification. */
92 struct oftable *tables;
95 /* Rules indexed on their cookie values, in all flow tables. */
96 struct hindex cookies OVS_GUARDED_BY(ofproto_mutex);
98 /* List of expirable flows, in all flow tables. */
99 struct list expirable OVS_GUARDED_BY(ofproto_mutex);
102 * OpenFlow meters start at 1. To avoid confusion we leave the first
103 * pointer in the array un-used, and index directly with the OpenFlow
105 struct ofputil_meter_features meter_features;
106 struct meter **meters; /* 'meter_features.max_meter' + 1 pointers. */
108 /* OpenFlow connections. */
109 struct connmgr *connmgr;
111 /* Flow table operation tracking.
113 * 'state' is meaningful only within ofproto.c, one of the enum
114 * ofproto_state constants defined there.
116 * 'pending' is the list of "struct ofopgroup"s currently pending.
118 * 'n_pending' is the number of elements in 'pending'.
120 * 'deletions' contains pending ofoperations of type OFOPERATION_DELETE,
121 * indexed on its rule's flow.*/
123 struct list pending OVS_GUARDED_BY(ofproto_mutex);
124 unsigned int n_pending OVS_GUARDED_BY(ofproto_mutex);
125 struct hmap deletions OVS_GUARDED_BY(ofproto_mutex);
127 /* Delayed rule executions.
129 * We delay calls to ->ofproto_class->rule_execute() past releasing
130 * ofproto_mutex during a flow_mod, because otherwise a "learn" action
131 * triggered by the executing the packet would try to recursively modify
132 * the flow table and reacquire the global lock. */
133 struct guarded_list rule_executes; /* Contains "struct rule_execute"s. */
135 /* Flow table operation logging. */
136 int n_add, n_delete, n_modify; /* Number of unreported ops of each kind. */
137 long long int first_op, last_op; /* Range of times for unreported ops. */
138 long long int next_op_report; /* Time to report ops, or LLONG_MAX. */
139 long long int op_backoff; /* Earliest time to report ops again. */
141 /* Linux VLAN device support (e.g. "eth0.10" for VLAN 10.)
143 * This is deprecated. It is only for compatibility with broken device
144 * drivers in old versions of Linux that do not properly support VLANs when
145 * VLAN devices are not used. When broken device drivers are no longer in
146 * widespread use, we will delete these interfaces. */
147 unsigned long int *vlan_bitmap; /* 4096-bit bitmap of in-use VLANs. */
148 bool vlans_changed; /* True if new VLANs are in use. */
149 int min_mtu; /* Current MTU of non-internal ports. */
152 struct ovs_rwlock groups_rwlock;
153 struct hmap groups OVS_GUARDED; /* Contains "struct ofgroup"s. */
154 uint32_t n_groups[4] OVS_GUARDED; /* # of existing groups of each type. */
155 struct ofputil_group_features ogf;
158 void ofproto_init_tables(struct ofproto *, int n_tables);
159 void ofproto_init_max_ports(struct ofproto *, uint16_t max_ports);
161 struct ofproto *ofproto_lookup(const char *name);
162 struct ofport *ofproto_get_port(const struct ofproto *, ofp_port_t ofp_port);
164 /* An OpenFlow port within a "struct ofproto".
166 * The port's name is netdev_get_name(port->netdev).
168 * With few exceptions, ofproto implementations may look at these fields but
169 * should not modify them. */
171 struct hmap_node hmap_node; /* In struct ofproto's "ports" hmap. */
172 struct ofproto *ofproto; /* The ofproto that contains this port. */
173 struct netdev *netdev;
174 struct ofputil_phy_port pp;
175 ofp_port_t ofp_port; /* OpenFlow port number. */
176 long long int created; /* Time created, in msec. */
180 void ofproto_port_set_state(struct ofport *, enum ofputil_port_state);
182 /* OpenFlow table flags:
184 * - "Hidden" tables are not included in OpenFlow operations that operate on
185 * "all tables". For example, a request for flow stats on all tables will
186 * omit flows in hidden tables, table stats requests will omit the table
187 * entirely, and the switch features reply will not count the hidden table.
189 * However, operations that specifically name the particular table still
190 * operate on it. For example, flow_mods and flow stats requests on a
193 * To avoid gaps in table IDs (which have unclear validity in OpenFlow),
194 * hidden tables must be the highest-numbered tables that a provider
197 * - "Read-only" tables can't be changed through OpenFlow operations. (At
198 * the moment all flow table operations go effectively through OpenFlow, so
199 * this means that read-only tables can't be changed at all after the
200 * read-only flag is set.)
202 * The generic ofproto layer never sets these flags. An ofproto provider can
203 * set them if it is appropriate.
206 OFTABLE_HIDDEN = 1 << 0, /* Hide from most OpenFlow operations. */
207 OFTABLE_READONLY = 1 << 1 /* Don't allow OpenFlow to change this table. */
210 /* A flow table within a "struct ofproto".
216 * A cls->rwlock read-lock holder prevents rules from being added or deleted.
218 * Adding or removing rules requires holding ofproto_mutex AND the cls->rwlock
221 * cls->rwlock should be held only briefly. For extended access to a rule,
222 * increment its ref_count with ofproto_rule_ref(). A rule will not be freed
223 * until its ref_count reaches zero.
225 * Modifying a rule requires the rule's own mutex. Holding cls->rwlock (for
226 * read or write) does not allow the holder to modify the rule.
228 * Freeing a rule requires ofproto_mutex and the cls->rwlock write-lock. After
229 * removing the rule from the classifier, release a ref_count from the rule
230 * ('cls''s reference to the rule).
232 * Refer to the thread-safety notes on struct rule for more information.*/
234 enum oftable_flags flags;
235 struct classifier cls; /* Contains "struct rule"s. */
236 char *name; /* Table name exposed via OpenFlow, or NULL. */
238 /* Maximum number of flows or UINT_MAX if there is no limit besides any
239 * limit imposed by resource limitations. */
240 unsigned int max_flows;
242 /* These members determine the handling of an attempt to add a flow that
243 * would cause the table to have more than 'max_flows' flows.
245 * If 'eviction_fields' is NULL, overflows will be rejected with an error.
247 * If 'eviction_fields' is nonnull (regardless of whether n_eviction_fields
248 * is nonzero), an overflow will cause a flow to be removed. The flow to
249 * be removed is chosen to give fairness among groups distinguished by
250 * different values for the subfields within 'groups'. */
251 struct mf_subfield *eviction_fields;
252 size_t n_eviction_fields;
256 * When a flow is added that would cause the table to have more than
257 * 'max_flows' flows, and 'eviction_fields' is nonnull, these groups are
258 * used to decide which rule to evict: the rule is chosen from the eviction
259 * group that contains the greatest number of rules.*/
260 uint32_t eviction_group_id_basis;
261 struct hmap eviction_groups_by_id;
262 struct heap eviction_groups_by_size;
265 /* Assigns TABLE to each oftable, in turn, in OFPROTO.
267 * All parameters are evaluated multiple times. */
268 #define OFPROTO_FOR_EACH_TABLE(TABLE, OFPROTO) \
269 for ((TABLE) = (OFPROTO)->tables; \
270 (TABLE) < &(OFPROTO)->tables[(OFPROTO)->n_tables]; \
273 /* An OpenFlow flow within a "struct ofproto".
275 * With few exceptions, ofproto implementations may look at these fields but
276 * should not modify them.
282 * Except near the beginning or ending of its lifespan, rule 'rule' belongs to
283 * the classifier rule->ofproto->tables[rule->table_id].cls. The text below
284 * calls this classifier 'cls'.
289 * The thread safety rules described here for "struct rule" are motivated by
292 * - Prevent threads that read members of "struct rule" from reading bad
293 * data due to changes by some thread concurrently modifying those
296 * - Prevent two threads making changes to members of a given "struct rule"
297 * from interfering with each other.
303 * A rule 'rule' may be accessed without a risk of being freed by code that
304 * holds a read-lock or write-lock on 'cls->rwlock' or that owns a reference to
305 * 'rule->ref_count' (or both). Code that needs to hold onto a rule for a
306 * while should take 'cls->rwlock', find the rule it needs, increment
307 * 'rule->ref_count' with ofproto_rule_ref(), and drop 'cls->rwlock'.
309 * 'rule->ref_count' protects 'rule' from being freed. It doesn't protect the
310 * rule from being deleted from 'cls' (that's 'cls->rwlock') and it doesn't
311 * protect members of 'rule' from modification (that's 'rule->mutex').
313 * 'rule->mutex' protects the members of 'rule' from modification. It doesn't
314 * protect the rule from being deleted from 'cls' (that's 'cls->rwlock') and it
315 * doesn't prevent the rule from being freed (that's 'rule->ref_count').
317 * Regarding thread safety, the members of a rule fall into the following
320 * - Immutable. These members are marked 'const'.
322 * - Members that may be safely read or written only by code holding
323 * ofproto_mutex. These are marked OVS_GUARDED_BY(ofproto_mutex).
325 * - Members that may be safely read only by code holding ofproto_mutex or
326 * 'rule->mutex', and safely written only by coding holding ofproto_mutex
327 * AND 'rule->mutex'. These are marked OVS_GUARDED.
330 /* Where this rule resides in an OpenFlow switch.
332 * These are immutable once the rule is constructed, hence 'const'. */
333 struct ofproto *const ofproto; /* The ofproto that contains this rule. */
334 const struct cls_rule cr; /* In owning ofproto's classifier. */
335 const uint8_t table_id; /* Index in ofproto's 'tables' array. */
337 /* Protects members marked OVS_GUARDED.
338 * Readers only need to hold this mutex.
339 * Writers must hold both this mutex AND ofproto_mutex. */
340 struct ovs_mutex mutex OVS_ACQ_AFTER(ofproto_mutex);
342 /* Number of references.
343 * The classifier owns one reference.
344 * Any thread trying to keep a rule from being freed should hold its own
346 atomic_uint ref_count;
348 /* Operation now in progress, if nonnull. */
349 struct ofoperation *pending OVS_GUARDED_BY(ofproto_mutex);
351 /* A "flow cookie" is the OpenFlow name for a 64-bit value associated with
353 ovs_be64 flow_cookie OVS_GUARDED;
354 struct hindex_node cookie_node OVS_GUARDED_BY(ofproto_mutex);
357 long long int created OVS_GUARDED; /* Creation time. */
358 long long int modified OVS_GUARDED; /* Time of last modification. */
359 long long int used OVS_GUARDED; /* Last use; time created if never used. */
360 enum ofputil_flow_mod_flags flags OVS_GUARDED;
363 uint16_t hard_timeout OVS_GUARDED; /* In seconds from ->modified. */
364 uint16_t idle_timeout OVS_GUARDED; /* In seconds from ->used. */
366 /* Eviction groups (see comment on struct eviction_group for explanation) .
368 * 'eviction_group' is this rule's eviction group, or NULL if it is not in
369 * any eviction group. When 'eviction_group' is nonnull, 'evg_node' is in
370 * the ->eviction_group->rules hmap. */
371 struct eviction_group *eviction_group OVS_GUARDED_BY(ofproto_mutex);
372 struct heap_node evg_node OVS_GUARDED_BY(ofproto_mutex);
374 /* OpenFlow actions. See struct rule_actions for more thread-safety
376 struct rule_actions *actions OVS_GUARDED;
378 /* In owning meter's 'rules' list. An empty list if there is no meter. */
379 struct list meter_list_node OVS_GUARDED_BY(ofproto_mutex);
381 /* Flow monitors (e.g. for NXST_FLOW_MONITOR, related to struct ofmonitor).
383 * 'add_seqno' is the sequence number when this rule was created.
384 * 'modify_seqno' is the sequence number when this rule was last modified.
385 * See 'monitor_seqno' in connmgr.c for more information. */
386 enum nx_flow_monitor_flags monitor_flags OVS_GUARDED_BY(ofproto_mutex);
387 uint64_t add_seqno OVS_GUARDED_BY(ofproto_mutex);
388 uint64_t modify_seqno OVS_GUARDED_BY(ofproto_mutex);
390 /* Optimisation for flow expiry. In ofproto's 'expirable' list if this
391 * rule is expirable, otherwise empty. */
392 struct list expirable OVS_GUARDED_BY(ofproto_mutex);
395 void ofproto_rule_ref(struct rule *);
396 void ofproto_rule_unref(struct rule *);
398 struct rule_actions *rule_get_actions(const struct rule *rule)
399 OVS_EXCLUDED(rule->mutex);
400 struct rule_actions *rule_get_actions__(const struct rule *rule)
401 OVS_REQUIRES(rule->mutex);
403 /* Returns true if 'rule' is an OpenFlow 1.3 "table-miss" rule, false
406 * ("Table-miss" rules are special because a packet_in generated through one
407 * uses OFPR_NO_MATCH as its reason, whereas packet_ins generated by any other
408 * rule use OFPR_ACTION.) */
410 rule_is_table_miss(const struct rule *rule)
412 return rule->cr.priority == 0 && cls_rule_is_catchall(&rule->cr);
415 /* A set of actions within a "struct rule".
421 * A struct rule_actions 'actions' may be accessed without a risk of being
422 * freed by code that holds a read-lock or write-lock on 'rule->mutex' (where
423 * 'rule' is the rule for which 'rule->actions == actions') or that owns a
424 * reference to 'actions->ref_count' (or both). */
425 struct rule_actions {
426 atomic_uint ref_count;
428 /* These members are immutable: they do not change during the struct's
430 struct ofpact *ofpacts; /* Sequence of "struct ofpacts". */
431 unsigned int ofpacts_len; /* Size of 'ofpacts', in bytes. */
432 uint32_t provider_meter_id; /* Datapath meter_id, or UINT32_MAX. */
435 struct rule_actions *rule_actions_create(const struct ofproto *,
436 const struct ofpact *, size_t);
437 void rule_actions_ref(struct rule_actions *);
438 void rule_actions_unref(struct rule_actions *);
440 /* A set of rules to which an OpenFlow operation applies. */
441 struct rule_collection {
442 struct rule **rules; /* The rules. */
443 size_t n; /* Number of rules collected. */
445 size_t capacity; /* Number of rules that will fit in 'rules'. */
446 struct rule *stub[64]; /* Preallocated rules to avoid malloc(). */
449 void rule_collection_init(struct rule_collection *);
450 void rule_collection_add(struct rule_collection *, struct rule *);
451 void rule_collection_ref(struct rule_collection *) OVS_REQUIRES(ofproto_mutex);
452 void rule_collection_unref(struct rule_collection *);
453 void rule_collection_destroy(struct rule_collection *);
455 /* Threshold at which to begin flow table eviction. Only affects the
456 * ofproto-dpif implementation */
457 extern unsigned flow_eviction_threshold;
459 /* Number of upcall handler threads. Only affects the ofproto-dpif
461 extern unsigned n_handler_threads;
463 /* Determines which model to use for handling misses in the ofproto-dpif
465 extern enum ofproto_flow_miss_model flow_miss_model;
467 static inline struct rule *
468 rule_from_cls_rule(const struct cls_rule *cls_rule)
470 return cls_rule ? CONTAINER_OF(cls_rule, struct rule, cr) : NULL;
473 void ofproto_rule_expire(struct rule *rule, uint8_t reason)
474 OVS_REQUIRES(ofproto_mutex);
475 void ofproto_rule_delete(struct ofproto *, struct rule *)
476 OVS_EXCLUDED(ofproto_mutex);
477 void ofproto_rule_reduce_timeouts(struct rule *rule, uint16_t idle_timeout,
478 uint16_t hard_timeout)
479 OVS_EXCLUDED(ofproto_mutex);
481 void ofoperation_complete(struct ofoperation *, enum ofperr);
483 bool ofoperation_has_out_port(const struct ofoperation *, ofp_port_t out_port)
484 OVS_REQUIRES(ofproto_mutex);
486 /* A group within a "struct ofproto".
488 * With few exceptions, ofproto implementations may look at these fields but
489 * should not modify them. */
491 /* The rwlock is used to prevent groups from being deleted while child
492 * threads are using them to xlate flows. A read lock means the
493 * group is currently being used. A write lock means the group is
494 * in the process of being deleted or updated. Note that since
495 * a read lock on the groups container is held while searching, and
496 * a group is ever write locked only while holding a write lock
497 * on the container, the user's of groups will never face a group
498 * in the write locked state. */
499 struct ovs_rwlock rwlock OVS_ACQ_AFTER(ofproto_mutex);
500 struct hmap_node hmap_node; /* In struct ofproto's "groups" hmap. */
501 struct ofproto *ofproto; /* The ofproto that contains this group. */
503 enum ofp11_group_type type; /* One of OFPGT_*. */
505 long long int created; /* Creation time. */
506 long long int modified; /* Time of last modification. */
508 struct list buckets; /* Contains "struct ofputil_bucket"s. */
512 bool ofproto_group_lookup(const struct ofproto *ofproto, uint32_t group_id,
513 struct ofgroup **group)
514 OVS_TRY_RDLOCK(true, (*group)->rwlock);
516 void ofproto_group_release(struct ofgroup *group)
517 OVS_RELEASES(group->rwlock);
519 /* ofproto class structure, to be defined by each ofproto implementation.
525 * These functions work primarily with four different kinds of data
528 * - "struct ofproto", which represents an OpenFlow switch.
530 * - "struct ofport", which represents a port within an ofproto.
532 * - "struct rule", which represents an OpenFlow flow within an ofproto.
534 * - "struct ofgroup", which represents an OpenFlow 1.1+ group within an
537 * Each of these data structures contains all of the implementation-independent
538 * generic state for the respective concept, called the "base" state. None of
539 * them contains any extra space for ofproto implementations to use. Instead,
540 * each implementation is expected to declare its own data structure that
541 * contains an instance of the generic data structure plus additional
542 * implementation-specific members, called the "derived" state. The
543 * implementation can use casts or (preferably) the CONTAINER_OF macro to
544 * obtain access to derived state given only a pointer to the embedded generic
551 * Four stylized functions accompany each of these data structures:
553 * "alloc" "construct" "destruct" "dealloc"
554 * ------------ ---------------- --------------- --------------
555 * ofproto ->alloc ->construct ->destruct ->dealloc
556 * ofport ->port_alloc ->port_construct ->port_destruct ->port_dealloc
557 * rule ->rule_alloc ->rule_construct ->rule_destruct ->rule_dealloc
558 * group ->group_alloc ->group_construct ->group_destruct ->group_dealloc
560 * "ofproto", "ofport", and "group" have this exact life cycle. The "rule"
561 * data structure also follow this life cycle with some additional elaborations
562 * described under "Rule Life Cycle" below.
564 * Any instance of a given data structure goes through the following life
567 * 1. The client calls the "alloc" function to obtain raw memory. If "alloc"
568 * fails, skip all the other steps.
570 * 2. The client initializes all of the data structure's base state. If this
571 * fails, skip to step 7.
573 * 3. The client calls the "construct" function. The implementation
574 * initializes derived state. It may refer to the already-initialized
575 * base state. If "construct" fails, skip to step 6.
577 * 4. The data structure is now initialized and in use.
579 * 5. When the data structure is no longer needed, the client calls the
580 * "destruct" function. The implementation uninitializes derived state.
581 * The base state has not been uninitialized yet, so the implementation
582 * may still refer to it.
584 * 6. The client uninitializes all of the data structure's base state.
586 * 7. The client calls the "dealloc" to free the raw memory. The
587 * implementation must not refer to base or derived state in the data
588 * structure, because it has already been uninitialized.
590 * Each "alloc" function allocates and returns a new instance of the respective
591 * data structure. The "alloc" function is not given any information about the
592 * use of the new data structure, so it cannot perform much initialization.
593 * Its purpose is just to ensure that the new data structure has enough room
594 * for base and derived state. It may return a null pointer if memory is not
595 * available, in which case none of the other functions is called.
597 * Each "construct" function initializes derived state in its respective data
598 * structure. When "construct" is called, all of the base state has already
599 * been initialized, so the "construct" function may refer to it. The
600 * "construct" function is allowed to fail, in which case the client calls the
601 * "dealloc" function (but not the "destruct" function).
603 * Each "destruct" function uninitializes and frees derived state in its
604 * respective data structure. When "destruct" is called, the base state has
605 * not yet been uninitialized, so the "destruct" function may refer to it. The
606 * "destruct" function is not allowed to fail.
608 * Each "dealloc" function frees raw memory that was allocated by the the
609 * "alloc" function. The memory's base and derived members might not have ever
610 * been initialized (but if "construct" returned successfully, then it has been
611 * "destruct"ed already). The "dealloc" function is not allowed to fail.
617 * Most of these functions return 0 if they are successful or a positive error
618 * code on failure. Depending on the function, valid error codes are either
619 * errno values or OFPERR_* OpenFlow error codes.
621 * Most of these functions are expected to execute synchronously, that is, to
622 * block as necessary to obtain a result. Thus, these functions may return
623 * EAGAIN (or EWOULDBLOCK or EINPROGRESS) only where the function descriptions
624 * explicitly say those errors are a possibility. We may relax this
625 * requirement in the future if and when we encounter performance problems. */
626 struct ofproto_class {
627 /* ## ----------------- ## */
628 /* ## Factory Functions ## */
629 /* ## ----------------- ## */
631 /* Initializes provider. The caller may pass in 'iface_hints',
632 * which contains an shash of "struct iface_hint" elements indexed
633 * by the interface's name. The provider may use these hints to
634 * describe the startup configuration in order to reinitialize its
635 * state. The caller owns the provided data, so a provider must
636 * make copies of anything required. An ofproto provider must
637 * remove any existing state that is not described by the hint, and
638 * may choose to remove it all. */
639 void (*init)(const struct shash *iface_hints);
641 /* Enumerates the types of all support ofproto types into 'types'. The
642 * caller has already initialized 'types' and other ofproto classes might
643 * already have added names to it. */
644 void (*enumerate_types)(struct sset *types);
646 /* Enumerates the names of all existing datapath of the specified 'type'
647 * into 'names' 'all_dps'. The caller has already initialized 'names' as
650 * 'type' is one of the types enumerated by ->enumerate_types().
652 * Returns 0 if successful, otherwise a positive errno value.
654 int (*enumerate_names)(const char *type, struct sset *names);
656 /* Deletes the datapath with the specified 'type' and 'name'. The caller
657 * should have closed any open ofproto with this 'type' and 'name'; this
658 * function is allowed to fail if that is not the case.
660 * 'type' is one of the types enumerated by ->enumerate_types().
661 * 'name' is one of the names enumerated by ->enumerate_names() for 'type'.
663 * Returns 0 if successful, otherwise a positive errno value.
665 int (*del)(const char *type, const char *name);
667 /* Returns the type to pass to netdev_open() when a datapath of type
668 * 'datapath_type' has a port of type 'port_type', for a few special
669 * cases when a netdev type differs from a port type. For example,
670 * when using the userspace datapath, a port of type "internal"
671 * needs to be opened as "tap".
673 * Returns either 'type' itself or a string literal, which must not
675 const char *(*port_open_type)(const char *datapath_type,
676 const char *port_type);
678 /* ## ------------------------ ## */
679 /* ## Top-Level type Functions ## */
680 /* ## ------------------------ ## */
682 /* Performs any periodic activity required on ofprotos of type
685 * An ofproto provider may implement it or not, depending on whether
686 * it needs type-level maintenance.
688 * Returns 0 if successful, otherwise a positive errno value. */
689 int (*type_run)(const char *type);
691 /* Causes the poll loop to wake up when a type 'type''s 'run'
692 * function needs to be called, e.g. by calling the timer or fd
693 * waiting functions in poll-loop.h.
695 * An ofproto provider may implement it or not, depending on whether
696 * it needs type-level maintenance. */
697 void (*type_wait)(const char *type);
699 /* ## --------------------------- ## */
700 /* ## Top-Level ofproto Functions ## */
701 /* ## --------------------------- ## */
703 /* Life-cycle functions for an "ofproto" (see "Life Cycle" above).
709 * ->construct() should not modify any base members of the ofproto. The
710 * client will initialize the ofproto's 'ports' and 'tables' members after
711 * construction is complete.
713 * When ->construct() is called, the client does not yet know how many flow
714 * tables the datapath supports, so ofproto->n_tables will be 0 and
715 * ofproto->tables will be NULL. ->construct() should call
716 * ofproto_init_tables() to allocate and initialize ofproto->n_tables and
717 * ofproto->tables. Each flow table will be initially empty, so
718 * ->construct() should delete flows from the underlying datapath, if
719 * necessary, rather than populating the tables.
721 * If the ofproto knows the maximum port number that the datapath can have,
722 * then it can call ofproto_init_max_ports(). If it does so, then the
723 * client will ensure that the actions it allows to be used through
724 * OpenFlow do not refer to ports above that maximum number.
726 * Only one ofproto instance needs to be supported for any given datapath.
727 * If a datapath is already open as part of one "ofproto", then another
728 * attempt to "construct" the same datapath as part of another ofproto is
729 * allowed to fail with an error.
731 * ->construct() returns 0 if successful, otherwise a positive errno
738 * If 'ofproto' has any pending asynchronous operations, ->destruct()
739 * must complete all of them by calling ofoperation_complete().
741 * ->destruct() must also destroy all remaining rules in the ofproto's
742 * tables, by passing each remaining rule to ofproto_rule_delete(), and
743 * then complete each of those deletions in turn by calling
744 * ofoperation_complete().
746 * (Thus, there is a multi-step process for any rule currently being
747 * inserted or modified at the beginning of destruction: first
748 * ofoperation_complete() that operation, then ofproto_rule_delete() the
749 * rule, then ofoperation_complete() the deletion operation.)
751 * The client will destroy the flow tables themselves after ->destruct()
754 struct ofproto *(*alloc)(void);
755 int (*construct)(struct ofproto *ofproto);
756 void (*destruct)(struct ofproto *ofproto);
757 void (*dealloc)(struct ofproto *ofproto);
759 /* Performs any periodic activity required by 'ofproto'. It should:
761 * - Call connmgr_send_packet_in() for each received packet that missed
762 * in the OpenFlow flow table or that had a OFPP_CONTROLLER output
765 * - Call ofproto_rule_expire() for each OpenFlow flow that has reached
766 * its hard_timeout or idle_timeout, to expire the flow.
768 * (But rules that are part of a pending operation, e.g. rules for
769 * which ->pending is true, may not expire.)
771 * Returns 0 if successful, otherwise a positive errno value. */
772 int (*run)(struct ofproto *ofproto);
774 /* Causes the poll loop to wake up when 'ofproto''s 'run' function needs to
775 * be called, e.g. by calling the timer or fd waiting functions in
777 void (*wait)(struct ofproto *ofproto);
779 /* Adds some memory usage statistics for the implementation of 'ofproto'
780 * into 'usage', for use with memory_report().
782 * This function is optional. */
783 void (*get_memory_usage)(const struct ofproto *ofproto,
784 struct simap *usage);
786 /* Every "struct rule" in 'ofproto' is about to be deleted, one by one.
787 * This function may prepare for that, for example by clearing state in
788 * advance. It should *not* actually delete any "struct rule"s from
789 * 'ofproto', only prepare for it.
791 * This function is optional; it's really just for optimization in case
792 * it's cheaper to delete all the flows from your hardware in a single pass
793 * than to do it one by one. */
794 void (*flush)(struct ofproto *ofproto);
796 /* Helper for the OpenFlow OFPT_FEATURES_REQUEST request.
798 * The implementation should store true in '*arp_match_ip' if the switch
799 * supports matching IP addresses inside ARP requests and replies, false
802 * The implementation should store in '*actions' a bitmap of the supported
803 * OpenFlow actions. Vendor actions are not included in '*actions'. */
804 void (*get_features)(struct ofproto *ofproto,
806 enum ofputil_action_bitmap *actions);
808 /* Helper for the OpenFlow OFPST_TABLE statistics request.
810 * The 'ots' array contains 'ofproto->n_tables' elements. Each element is
813 * - 'table_id' to the array index.
815 * - 'name' to "table#" where # is the table ID.
817 * - 'match' and 'wildcards' to OFPXMT12_MASK.
819 * - 'write_actions' and 'apply_actions' to OFPAT12_OUTPUT.
821 * - 'write_setfields' and 'apply_setfields' to OFPXMT12_MASK.
823 * - 'metadata_match' and 'metadata_write' to UINT64_MAX.
825 * - 'instructions' to OFPIT11_ALL.
827 * - 'config' to OFPTC11_TABLE_MISS_MASK.
829 * - 'max_entries' to 1,000,000.
831 * - 'active_count' to the classifier_count() for the table.
833 * - 'lookup_count' and 'matched_count' to 0.
835 * The implementation should update any members in each element for which
836 * it has better values:
838 * - 'name' to a more meaningful name.
840 * - 'wildcards' to the set of wildcards actually supported by the table
841 * (if it doesn't support all OpenFlow wildcards).
843 * - 'instructions' to set the instructions actually supported by
846 * - 'write_actions' to set the write actions actually supported by
847 * the table (if it doesn't support all OpenFlow actions).
849 * - 'apply_actions' to set the apply actions actually supported by
850 * the table (if it doesn't support all OpenFlow actions).
852 * - 'write_setfields' to set the write setfields actually supported by
855 * - 'apply_setfields' to set the apply setfields actually supported by
858 * - 'max_entries' to the maximum number of flows actually supported by
861 * - 'lookup_count' to the number of packets looked up in this flow table
864 * - 'matched_count' to the number of packets looked up in this flow
865 * table so far that matched one of the flow entries.
867 * All of the members of struct ofp12_table_stats are in network byte
870 void (*get_tables)(struct ofproto *ofproto, struct ofp12_table_stats *ots);
872 /* ## ---------------- ## */
873 /* ## ofport Functions ## */
874 /* ## ---------------- ## */
876 /* Life-cycle functions for a "struct ofport" (see "Life Cycle" above).
878 * ->port_construct() should not modify any base members of the ofport.
879 * An ofproto implementation should use the 'ofp_port' member of
880 * "struct ofport" as the OpenFlow port number.
882 * ofports are managed by the base ofproto code. The ofproto
883 * implementation should only create and destroy them in response to calls
884 * to these functions. The base ofproto code will create and destroy
885 * ofports in the following situations:
887 * - Just after the ->construct() function is called, the base ofproto
888 * iterates over all of the implementation's ports, using
889 * ->port_dump_start() and related functions, and constructs an ofport
890 * for each dumped port.
892 * - If ->port_poll() reports that a specific port has changed, then the
893 * base ofproto will query that port with ->port_query_by_name() and
894 * construct or destruct ofports as necessary to reflect the updated
897 * - If ->port_poll() returns ENOBUFS to report an unspecified port set
898 * change, then the base ofproto will iterate over all of the
899 * implementation's ports, in the same way as at ofproto
900 * initialization, and construct and destruct ofports to reflect all of
903 * ->port_construct() returns 0 if successful, otherwise a positive errno
906 struct ofport *(*port_alloc)(void);
907 int (*port_construct)(struct ofport *ofport);
908 void (*port_destruct)(struct ofport *ofport);
909 void (*port_dealloc)(struct ofport *ofport);
911 /* Called after 'ofport->netdev' is replaced by a new netdev object. If
912 * the ofproto implementation uses the ofport's netdev internally, then it
913 * should switch to using the new one. The old one has been closed.
915 * An ofproto implementation that doesn't need to do anything in this
916 * function may use a null pointer. */
917 void (*port_modified)(struct ofport *ofport);
919 /* Called after an OpenFlow request changes a port's configuration.
920 * 'ofport->pp.config' contains the new configuration. 'old_config'
921 * contains the previous configuration.
923 * The caller implements OFPUTIL_PC_PORT_DOWN using netdev functions to
924 * turn NETDEV_UP on and off, so this function doesn't have to do anything
925 * for that bit (and it won't be called if that is the only bit that
927 void (*port_reconfigured)(struct ofport *ofport,
928 enum ofputil_port_config old_config);
930 /* Looks up a port named 'devname' in 'ofproto'. On success, initializes
931 * '*port' appropriately.
933 * The caller owns the data in 'port' and must free it with
934 * ofproto_port_destroy() when it is no longer needed. */
935 int (*port_query_by_name)(const struct ofproto *ofproto,
936 const char *devname, struct ofproto_port *port);
938 /* Attempts to add 'netdev' as a port on 'ofproto'. Returns 0 if
939 * successful, otherwise a positive errno value. The caller should
940 * inform the implementation of the OpenFlow port through the
941 * ->port_construct() method.
943 * It doesn't matter whether the new port will be returned by a later call
944 * to ->port_poll(); the implementation may do whatever is more
946 int (*port_add)(struct ofproto *ofproto, struct netdev *netdev);
948 /* Deletes port number 'ofp_port' from the datapath for 'ofproto'. Returns
949 * 0 if successful, otherwise a positive errno value.
951 * It doesn't matter whether the new port will be returned by a later call
952 * to ->port_poll(); the implementation may do whatever is more
954 int (*port_del)(struct ofproto *ofproto, ofp_port_t ofp_port);
957 int (*port_get_stats)(const struct ofport *port,
958 struct netdev_stats *stats);
960 /* Port iteration functions.
962 * The client might not be entirely in control of the ports within an
963 * ofproto. Some hardware implementations, for example, might have a fixed
964 * set of ports in a datapath. For this reason, the client needs a way to
965 * iterate through all the ports that are actually in a datapath. These
966 * functions provide that functionality.
968 * The 'state' pointer provides the implementation a place to
969 * keep track of its position. Its format is opaque to the caller.
971 * The ofproto provider retains ownership of the data that it stores into
972 * ->port_dump_next()'s 'port' argument. The data must remain valid until
973 * at least the next call to ->port_dump_next() or ->port_dump_done() for
974 * 'state'. The caller will not modify or free it.
979 * ->port_dump_start() attempts to begin dumping the ports in 'ofproto'.
980 * On success, it should return 0 and initialize '*statep' with any data
981 * needed for iteration. On failure, returns a positive errno value, and
982 * the client will not call ->port_dump_next() or ->port_dump_done().
984 * ->port_dump_next() attempts to retrieve another port from 'ofproto' for
985 * 'state'. If there is another port, it should store the port's
986 * information into 'port' and return 0. It should return EOF if all ports
987 * have already been iterated. Otherwise, on error, it should return a
988 * positive errno value. This function will not be called again once it
989 * returns nonzero once for a given iteration (but the 'port_dump_done'
990 * function will be called afterward).
992 * ->port_dump_done() allows the implementation to release resources used
993 * for iteration. The caller might decide to stop iteration in the middle
994 * by calling this function before ->port_dump_next() returns nonzero.
1002 * error = ofproto->ofproto_class->port_dump_start(ofproto, &state);
1005 * struct ofproto_port port;
1007 * error = ofproto->ofproto_class->port_dump_next(
1008 * ofproto, state, &port);
1012 * // Do something with 'port' here (without modifying or freeing
1013 * // any of its data).
1015 * ofproto->ofproto_class->port_dump_done(ofproto, state);
1017 * // 'error' is now EOF (success) or a positive errno value (failure).
1019 int (*port_dump_start)(const struct ofproto *ofproto, void **statep);
1020 int (*port_dump_next)(const struct ofproto *ofproto, void *state,
1021 struct ofproto_port *port);
1022 int (*port_dump_done)(const struct ofproto *ofproto, void *state);
1024 /* Polls for changes in the set of ports in 'ofproto'. If the set of ports
1025 * in 'ofproto' has changed, then this function should do one of the
1028 * - Preferably: store the name of the device that was added to or deleted
1029 * from 'ofproto' in '*devnamep' and return 0. The caller is responsible
1030 * for freeing '*devnamep' (with free()) when it no longer needs it.
1032 * - Alternatively: return ENOBUFS, without indicating the device that was
1035 * Occasional 'false positives', in which the function returns 0 while
1036 * indicating a device that was not actually added or deleted or returns
1037 * ENOBUFS without any change, are acceptable.
1039 * The purpose of 'port_poll' is to let 'ofproto' know about changes made
1040 * externally to the 'ofproto' object, e.g. by a system administrator via
1041 * ovs-dpctl. Therefore, it's OK, and even preferable, for port_poll() to
1042 * not report changes made through calls to 'port_add' or 'port_del' on the
1043 * same 'ofproto' object. (But it's OK for it to report them too, just
1044 * slightly less efficient.)
1046 * If the set of ports in 'ofproto' has not changed, returns EAGAIN. May
1047 * also return other positive errno values to indicate that something has
1050 * If the set of ports in a datapath is fixed, or if the only way that the
1051 * set of ports in a datapath can change is through ->port_add() and
1052 * ->port_del(), then this function may be a null pointer.
1054 int (*port_poll)(const struct ofproto *ofproto, char **devnamep);
1056 /* Arranges for the poll loop to wake up when ->port_poll() will return a
1057 * value other than EAGAIN.
1059 * If the set of ports in a datapath is fixed, or if the only way that the
1060 * set of ports in a datapath can change is through ->port_add() and
1061 * ->port_del(), or if the poll loop will always wake up anyway when
1062 * ->port_poll() will return a value other than EAGAIN, then this function
1063 * may be a null pointer.
1065 void (*port_poll_wait)(const struct ofproto *ofproto);
1067 /* Checks the status of LACP negotiation for 'port'. Returns 1 if LACP
1068 * partner information for 'port' is up-to-date, 0 if LACP partner
1069 * information is not current (generally indicating a connectivity
1070 * problem), or -1 if LACP is not enabled on 'port'.
1072 * This function may be a null pointer if the ofproto implementation does
1073 * not support LACP. */
1074 int (*port_is_lacp_current)(const struct ofport *port);
1076 /* ## ----------------------- ## */
1077 /* ## OpenFlow Rule Functions ## */
1078 /* ## ----------------------- ## */
1080 /* Chooses an appropriate table for 'match' within 'ofproto'. On
1081 * success, stores the table ID into '*table_idp' and returns 0. On
1082 * failure, returns an OpenFlow error code.
1084 * The choice of table should be a function of 'match' and 'ofproto''s
1085 * datapath capabilities. It should not depend on the flows already in
1086 * 'ofproto''s flow tables. Failure implies that an OpenFlow rule with
1087 * 'match' as its matching condition can never be inserted into 'ofproto',
1088 * even starting from an empty flow table.
1090 * If multiple tables are candidates for inserting the flow, the function
1091 * should choose one arbitrarily (but deterministically).
1093 * If this function is NULL then table 0 is always chosen. */
1094 enum ofperr (*rule_choose_table)(const struct ofproto *ofproto,
1095 const struct match *match,
1096 uint8_t *table_idp);
1098 /* Life-cycle functions for a "struct rule".
1104 * The life cycle of a struct rule is an elaboration of the basic life
1105 * cycle described above under "Life Cycle".
1107 * After a rule is successfully constructed, it is then inserted. If
1108 * insertion completes successfully, then before it is later destructed, it
1111 * You can think of a rule as having the following extra steps inserted
1112 * between "Life Cycle" steps 4 and 5:
1114 * 4.1. The client inserts the rule into the flow table, making it
1115 * visible in flow table lookups.
1117 * 4.2. The client calls "rule_insert". Immediately or eventually, the
1118 * implementation calls ofoperation_complete() to indicate that the
1119 * insertion completed. If the operation failed, skip to step 5.
1121 * 4.3. The rule is now installed in the flow table. Eventually it will
1124 * 4.4. The client removes the rule from the flow table. It is no longer
1125 * visible in flow table lookups.
1127 * 4.5. The client calls "rule_delete". Immediately or eventually, the
1128 * implementation calls ofoperation_complete() to indicate that the
1129 * deletion completed. Deletion is not allowed to fail, so it must
1133 * Asynchronous Operation Support
1134 * ==============================
1136 * The "insert" and "delete" life-cycle operations on rules can operate
1137 * asynchronously, meaning that ->rule_insert() and ->rule_delete() only
1138 * need to initiate their respective operations and do not need to wait for
1139 * them to complete before they return. ->rule_modify_actions() also
1140 * operates asynchronously.
1142 * An ofproto implementation reports the success or failure of an
1143 * asynchronous operation on a rule using the rule's 'pending' member,
1144 * which points to a opaque "struct ofoperation" that represents the
1145 * ongoing operation. When the operation completes, the ofproto
1146 * implementation calls ofoperation_complete(), passing the ofoperation and
1147 * an error indication.
1149 * Only the following contexts may call ofoperation_complete():
1151 * - The function called to initiate the operation, e.g. ->rule_insert()
1152 * or ->rule_delete(). This is the best choice if the operation
1153 * completes quickly.
1155 * - The implementation's ->run() function.
1157 * - The implementation's ->destruct() function.
1159 * The ofproto base code updates the flow table optimistically, assuming
1160 * that the operation will probably succeed:
1162 * - ofproto adds the rule in the flow table before calling
1165 * - ofproto updates the rule's actions and other properties before
1166 * calling ->rule_modify_actions().
1168 * - ofproto removes the rule before calling ->rule_delete().
1170 * With one exception, when an asynchronous operation completes with an
1171 * error, ofoperation_complete() backs out the already applied changes:
1173 * - If adding a rule in the flow table fails, ofproto removes the new
1176 * - If modifying a rule fails, ofproto restores the original actions
1177 * (and other properties).
1179 * - Removing a rule is not allowed to fail. It must always succeed.
1181 * The ofproto base code serializes operations: if any operation is in
1182 * progress on a given rule, ofproto postpones initiating any new operation
1183 * on that rule until the pending operation completes. Therefore, every
1184 * operation must eventually complete through a call to
1185 * ofoperation_complete() to avoid delaying new operations indefinitely
1186 * (including any OpenFlow request that affects the rule in question, even
1187 * just to query its statistics).
1193 * When ->rule_construct() is called, 'rule' is a new rule that is not yet
1194 * inserted into a flow table. ->rule_construct() should initialize enough
1195 * of the rule's derived state for 'rule' to be suitable for inserting into
1196 * a flow table. ->rule_construct() should not modify any base members of
1199 * If ->rule_construct() fails (as indicated by returning a nonzero
1200 * OpenFlow error code), the ofproto base code will uninitialize and
1201 * deallocate 'rule'. See "Rule Life Cycle" above for more details.
1203 * ->rule_construct() may also:
1205 * - Validate that the datapath supports the matching rule in 'rule->cr'
1206 * datapath. For example, if the rule's table does not support
1207 * registers, then it is an error if 'rule->cr' does not wildcard all
1210 * - Validate that the datapath can correctly implement 'rule->ofpacts'.
1212 * Some implementations might need to defer these tasks to ->rule_insert(),
1213 * which is also acceptable.
1219 * Following successful construction, the ofproto base case inserts 'rule'
1220 * into its flow table, then it calls ->rule_insert(). ->rule_insert()
1221 * should set in motion adding the new rule to the datapath flow table. It
1222 * must act as follows:
1224 * - If it completes insertion, either by succeeding or failing, it must
1225 * call ofoperation_complete()
1227 * - If insertion is only partially complete, then it must return without
1228 * calling ofoperation_complete(). Later, when the insertion is
1229 * complete, the ->run() or ->destruct() function must call
1230 * ofoperation_complete() to report success or failure.
1232 * If ->rule_insert() fails, the ofproto base code will remove 'rule' from
1233 * the flow table, destruct, uninitialize, and deallocate 'rule'. See
1234 * "Rule Life Cycle" above for more details.
1240 * The ofproto base code removes 'rule' from its flow table before it calls
1241 * ->rule_delete(). ->rule_delete() should set in motion removing 'rule'
1242 * from the datapath flow table. It must act as follows:
1244 * - If it completes deletion, it must call ofoperation_complete().
1246 * - If deletion is only partially complete, then it must return without
1247 * calling ofoperation_complete(). Later, when the deletion is
1248 * complete, the ->run() or ->destruct() function must call
1249 * ofoperation_complete().
1251 * Rule deletion must not fail.
1257 * ->rule_destruct() must uninitialize derived state.
1259 * Rule destruction must not fail. */
1260 struct rule *(*rule_alloc)(void);
1261 enum ofperr (*rule_construct)(struct rule *rule)
1262 /* OVS_REQUIRES(ofproto_mutex) */;
1263 void (*rule_insert)(struct rule *rule) /* OVS_REQUIRES(ofproto_mutex) */;
1264 void (*rule_delete)(struct rule *rule) /* OVS_REQUIRES(ofproto_mutex) */;
1265 void (*rule_destruct)(struct rule *rule);
1266 void (*rule_dealloc)(struct rule *rule);
1268 /* Obtains statistics for 'rule', storing the number of packets that have
1269 * matched it in '*packet_count' and the number of bytes in those packets
1270 * in '*byte_count'. UINT64_MAX indicates that the packet count or byte
1271 * count is unknown. */
1272 void (*rule_get_stats)(struct rule *rule, uint64_t *packet_count,
1273 uint64_t *byte_count)
1274 /* OVS_EXCLUDED(ofproto_mutex) */;
1276 /* Applies the actions in 'rule' to 'packet'. (This implements sending
1277 * buffered packets for OpenFlow OFPT_FLOW_MOD commands.)
1279 * Takes ownership of 'packet' (so it should eventually free it, with
1282 * 'flow' reflects the flow information for 'packet'. All of the
1283 * information in 'flow' is extracted from 'packet', except for
1284 * flow->tunnel and flow->in_port, which are assigned the correct values
1285 * for the incoming packet. The register values are zeroed. 'packet''s
1286 * header pointers (e.g. packet->l3) are appropriately initialized.
1287 * packet->l3 is aligned on a 32-bit boundary.
1289 * The implementation should add the statistics for 'packet' into 'rule'.
1291 * Returns 0 if successful, otherwise an OpenFlow error code. */
1292 enum ofperr (*rule_execute)(struct rule *rule, const struct flow *flow,
1293 struct ofpbuf *packet);
1295 /* When ->rule_modify_actions() is called, the caller has already replaced
1296 * the OpenFlow actions in 'rule' by a new set. (The original actions are
1297 * in rule->pending->actions.)
1299 * ->rule_modify_actions() should set the following in motion:
1301 * - Validate that the datapath can correctly implement the actions now
1304 * - Update the datapath flow table with the new actions.
1306 * - Only if 'reset_counters' is true, reset any packet or byte counters
1307 * associated with the rule to zero, so that rule_get_stats() will not
1308 * longer count those packets or bytes.
1310 * If the operation synchronously completes, ->rule_modify_actions() may
1311 * call ofoperation_complete() before it returns. Otherwise, ->run()
1312 * should call ofoperation_complete() later, after the operation does
1315 * If the operation fails, then the base ofproto code will restore the
1316 * original 'actions' and 'n_actions' of 'rule'.
1318 * ->rule_modify_actions() should not modify any base members of struct
1320 void (*rule_modify_actions)(struct rule *rule, bool reset_counters)
1321 /* OVS_REQUIRES(ofproto_mutex) */;
1323 /* Changes the OpenFlow IP fragment handling policy to 'frag_handling',
1324 * which takes one of the following values, with the corresponding
1327 * - OFPC_FRAG_NORMAL: The switch should treat IP fragments the same way
1328 * as other packets, omitting TCP and UDP port numbers (always setting
1331 * - OFPC_FRAG_DROP: The switch should drop all IP fragments without
1332 * passing them through the flow table.
1334 * - OFPC_FRAG_REASM: The switch should reassemble IP fragments before
1335 * passing packets through the flow table.
1337 * - OFPC_FRAG_NX_MATCH (a Nicira extension): Similar to OFPC_FRAG_NORMAL,
1338 * except that TCP and UDP port numbers should be included in fragments
1341 * Implementations are not required to support every mode.
1342 * OFPC_FRAG_NORMAL is the default mode when an ofproto is created.
1344 * At the time of the call to ->set_frag_handling(), the current mode is
1345 * available in 'ofproto->frag_handling'. ->set_frag_handling() returns
1346 * true if the requested mode was set, false if it is not supported.
1348 * Upon successful return, the caller changes 'ofproto->frag_handling' to
1349 * reflect the new mode.
1351 bool (*set_frag_handling)(struct ofproto *ofproto,
1352 enum ofp_config_flags frag_handling);
1354 /* Implements the OpenFlow OFPT_PACKET_OUT command. The datapath should
1355 * execute the 'ofpacts_len' bytes of "struct ofpacts" in 'ofpacts'.
1357 * The caller retains ownership of 'packet' and of 'ofpacts', so
1358 * ->packet_out() should not modify or free them.
1360 * This function must validate that it can correctly implement 'ofpacts'.
1361 * If not, then it should return an OpenFlow error code.
1363 * 'flow' reflects the flow information for 'packet'. All of the
1364 * information in 'flow' is extracted from 'packet', except for
1365 * flow->in_port (see below). flow->tunnel and its register values are
1368 * flow->in_port comes from the OpenFlow OFPT_PACKET_OUT message. The
1369 * implementation should reject invalid flow->in_port values by returning
1370 * OFPERR_OFPBRC_BAD_PORT. (If the implementation called
1371 * ofproto_init_max_ports(), then the client will reject these ports
1372 * itself.) For consistency, the implementation should consider valid for
1373 * flow->in_port any value that could possibly be seen in a packet that it
1374 * passes to connmgr_send_packet_in(). Ideally, even an implementation
1375 * that never generates packet-ins (e.g. due to hardware limitations)
1376 * should still allow flow->in_port values for every possible physical port
1377 * and OFPP_LOCAL. The only virtual ports (those above OFPP_MAX) that the
1378 * caller will ever pass in as flow->in_port, other than OFPP_LOCAL, are
1379 * OFPP_NONE and OFPP_CONTROLLER. The implementation should allow both of
1380 * these, treating each of them as packets generated by the controller as
1381 * opposed to packets originating from some switch port.
1383 * (Ordinarily the only effect of flow->in_port is on output actions that
1384 * involve the input port, such as actions that output to OFPP_IN_PORT,
1385 * OFPP_FLOOD, or OFPP_ALL. flow->in_port can also affect Nicira extension
1386 * "resubmit" actions.)
1388 * 'packet' is not matched against the OpenFlow flow table, so its
1389 * statistics should not be included in OpenFlow flow statistics.
1391 * Returns 0 if successful, otherwise an OpenFlow error code. */
1392 enum ofperr (*packet_out)(struct ofproto *ofproto, struct ofpbuf *packet,
1393 const struct flow *flow,
1394 const struct ofpact *ofpacts,
1395 size_t ofpacts_len);
1397 /* ## ------------------------- ## */
1398 /* ## OFPP_NORMAL configuration ## */
1399 /* ## ------------------------- ## */
1401 /* Configures NetFlow on 'ofproto' according to the options in
1402 * 'netflow_options', or turns off NetFlow if 'netflow_options' is NULL.
1404 * EOPNOTSUPP as a return value indicates that 'ofproto' does not support
1405 * NetFlow, as does a null pointer. */
1406 int (*set_netflow)(struct ofproto *ofproto,
1407 const struct netflow_options *netflow_options);
1409 void (*get_netflow_ids)(const struct ofproto *ofproto,
1410 uint8_t *engine_type, uint8_t *engine_id);
1412 /* Configures sFlow on 'ofproto' according to the options in
1413 * 'sflow_options', or turns off sFlow if 'sflow_options' is NULL.
1415 * EOPNOTSUPP as a return value indicates that 'ofproto' does not support
1416 * sFlow, as does a null pointer. */
1417 int (*set_sflow)(struct ofproto *ofproto,
1418 const struct ofproto_sflow_options *sflow_options);
1420 /* Configures IPFIX on 'ofproto' according to the options in
1421 * 'bridge_exporter_options' and the 'flow_exporters_options'
1422 * array, or turns off IPFIX if 'bridge_exporter_options' and
1423 * 'flow_exporters_options' is NULL.
1425 * EOPNOTSUPP as a return value indicates that 'ofproto' does not support
1426 * IPFIX, as does a null pointer. */
1428 struct ofproto *ofproto,
1429 const struct ofproto_ipfix_bridge_exporter_options
1430 *bridge_exporter_options,
1431 const struct ofproto_ipfix_flow_exporter_options
1432 *flow_exporters_options, size_t n_flow_exporters_options);
1434 /* Configures connectivity fault management on 'ofport'.
1436 * If 'cfm_settings' is nonnull, configures CFM according to its members.
1438 * If 'cfm_settings' is null, removes any connectivity fault management
1439 * configuration from 'ofport'.
1441 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1442 * support CFM, as does a null pointer. */
1443 int (*set_cfm)(struct ofport *ofport, const struct cfm_settings *s);
1445 /* Checks the status of CFM configured on 'ofport'. Returns true if the
1446 * port's CFM status was successfully stored into '*status'. Returns false
1447 * if the port did not have CFM configured, in which case '*status' is
1450 * The caller must provide and owns '*status', but it does not own and must
1451 * not modify or free the array returned in 'status->rmps'. */
1452 bool (*get_cfm_status)(const struct ofport *ofport,
1453 struct ofproto_cfm_status *status);
1455 /* Configures BFD on 'ofport'.
1457 * If 'cfg' is NULL, or 'cfg' does not contain the key value pair
1458 * "enable=true", removes BFD from 'ofport'. Otherwise, configures BFD
1459 * according to 'cfg'.
1461 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1462 * support BFD, as does a null pointer. */
1463 int (*set_bfd)(struct ofport *ofport, const struct smap *cfg);
1465 /* Populates 'smap' with the status of BFD on 'ofport'. Returns 0 on
1466 * success, or a positive errno. EOPNOTSUPP as a return value indicates
1467 * that this ofproto_class does not support BFD, as does a null pointer. */
1468 int (*get_bfd_status)(struct ofport *ofport, struct smap *smap);
1470 /* Configures spanning tree protocol (STP) on 'ofproto' using the
1471 * settings defined in 's'.
1473 * If 's' is nonnull, configures STP according to its members.
1475 * If 's' is null, removes any STP configuration from 'ofproto'.
1477 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1478 * support STP, as does a null pointer. */
1479 int (*set_stp)(struct ofproto *ofproto,
1480 const struct ofproto_stp_settings *s);
1482 /* Retrieves state of spanning tree protocol (STP) on 'ofproto'.
1484 * Stores STP state for 'ofproto' in 's'. If the 'enabled' member
1485 * is false, the other member values are not meaningful.
1487 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1488 * support STP, as does a null pointer. */
1489 int (*get_stp_status)(struct ofproto *ofproto,
1490 struct ofproto_stp_status *s);
1492 /* Configures spanning tree protocol (STP) on 'ofport' using the
1493 * settings defined in 's'.
1495 * If 's' is nonnull, configures STP according to its members. The
1496 * caller is responsible for assigning STP port numbers (using the
1497 * 'port_num' member in the range of 1 through 255, inclusive) and
1498 * ensuring there are no duplicates.
1500 * If 's' is null, removes any STP configuration from 'ofport'.
1502 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1503 * support STP, as does a null pointer. */
1504 int (*set_stp_port)(struct ofport *ofport,
1505 const struct ofproto_port_stp_settings *s);
1507 /* Retrieves spanning tree protocol (STP) port status of 'ofport'.
1509 * Stores STP state for 'ofport' in 's'. If the 'enabled' member is
1510 * false, the other member values are not meaningful.
1512 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1513 * support STP, as does a null pointer. */
1514 int (*get_stp_port_status)(struct ofport *ofport,
1515 struct ofproto_port_stp_status *s);
1517 /* Retrieves spanning tree protocol (STP) port statistics of 'ofport'.
1519 * Stores STP state for 'ofport' in 's'. If the 'enabled' member is
1520 * false, the other member values are not meaningful.
1522 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1523 * support STP, as does a null pointer. */
1524 int (*get_stp_port_stats)(struct ofport *ofport,
1525 struct ofproto_port_stp_stats *s);
1527 /* Registers meta-data associated with the 'n_qdscp' Qualities of Service
1528 * 'queues' attached to 'ofport'. This data is not intended to be
1529 * sufficient to implement QoS. Instead, providers may use this
1530 * information to implement features which require knowledge of what queues
1531 * exist on a port, and some basic information about them.
1533 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1534 * support QoS, as does a null pointer. */
1535 int (*set_queues)(struct ofport *ofport,
1536 const struct ofproto_port_queue *queues, size_t n_qdscp);
1538 /* If 's' is nonnull, this function registers a "bundle" associated with
1539 * client data pointer 'aux' in 'ofproto'. A bundle is the same concept as
1540 * a Port in OVSDB, that is, it consists of one or more "slave" devices
1541 * (Interfaces, in OVSDB) along with VLAN and LACP configuration and, if
1542 * there is more than one slave, a bonding configuration. If 'aux' is
1543 * already registered then this function updates its configuration to 's'.
1544 * Otherwise, this function registers a new bundle.
1546 * If 's' is NULL, this function unregisters the bundle registered on
1547 * 'ofproto' associated with client data pointer 'aux'. If no such bundle
1548 * has been registered, this has no effect.
1550 * This function affects only the behavior of the NXAST_AUTOPATH action and
1551 * output to the OFPP_NORMAL port. An implementation that does not support
1552 * it at all may set it to NULL or return EOPNOTSUPP. An implementation
1553 * that supports only a subset of the functionality should implement what
1554 * it can and return 0. */
1555 int (*bundle_set)(struct ofproto *ofproto, void *aux,
1556 const struct ofproto_bundle_settings *s);
1558 /* If 'port' is part of any bundle, removes it from that bundle. If the
1559 * bundle now has no ports, deletes the bundle. If the bundle now has only
1560 * one port, deconfigures the bundle's bonding configuration. */
1561 void (*bundle_remove)(struct ofport *ofport);
1563 /* If 's' is nonnull, this function registers a mirror associated with
1564 * client data pointer 'aux' in 'ofproto'. A mirror is the same concept as
1565 * a Mirror in OVSDB. If 'aux' is already registered then this function
1566 * updates its configuration to 's'. Otherwise, this function registers a
1569 * If 's' is NULL, this function unregisters the mirror registered on
1570 * 'ofproto' associated with client data pointer 'aux'. If no such mirror
1571 * has been registered, this has no effect.
1573 * An implementation that does not support mirroring at all may set
1574 * it to NULL or return EOPNOTSUPP. An implementation that supports
1575 * only a subset of the functionality should implement what it can
1577 int (*mirror_set)(struct ofproto *ofproto, void *aux,
1578 const struct ofproto_mirror_settings *s);
1580 /* Retrieves statistics from mirror associated with client data
1581 * pointer 'aux' in 'ofproto'. Stores packet and byte counts in
1582 * 'packets' and 'bytes', respectively. If a particular counter is
1583 * not supported, the appropriate argument is set to UINT64_MAX.
1585 * EOPNOTSUPP as a return value indicates that this ofproto_class does not
1586 * support retrieving mirror statistics. */
1587 int (*mirror_get_stats)(struct ofproto *ofproto, void *aux,
1588 uint64_t *packets, uint64_t *bytes);
1590 /* Configures the VLANs whose bits are set to 1 in 'flood_vlans' as VLANs
1591 * on which all packets are flooded, instead of using MAC learning. If
1592 * 'flood_vlans' is NULL, then MAC learning applies to all VLANs.
1594 * This function affects only the behavior of the OFPP_NORMAL action. An
1595 * implementation that does not support it may set it to NULL or return
1597 int (*set_flood_vlans)(struct ofproto *ofproto,
1598 unsigned long *flood_vlans);
1600 /* Returns true if 'aux' is a registered bundle that is currently in use as
1601 * the output for a mirror. */
1602 bool (*is_mirror_output_bundle)(const struct ofproto *ofproto, void *aux);
1604 /* When the configuration option of forward_bpdu changes, this function
1605 * will be invoked. */
1606 void (*forward_bpdu_changed)(struct ofproto *ofproto);
1608 /* Sets the MAC aging timeout for the OFPP_NORMAL action to 'idle_time', in
1609 * seconds, and the maximum number of MAC table entries to
1612 * An implementation that doesn't support configuring these features may
1613 * set this function to NULL or implement it as a no-op. */
1614 void (*set_mac_table_config)(struct ofproto *ofproto,
1615 unsigned int idle_time, size_t max_entries);
1617 /* Linux VLAN device support (e.g. "eth0.10" for VLAN 10.)
1619 * This is deprecated. It is only for compatibility with broken device drivers
1620 * in old versions of Linux that do not properly support VLANs when VLAN
1621 * devices are not used. When broken device drivers are no longer in
1622 * widespread use, we will delete these interfaces. */
1624 /* If 'realdev_ofp_port' is nonzero, then this function configures 'ofport'
1625 * as a VLAN splinter port for VLAN 'vid', associated with the real device
1626 * that has OpenFlow port number 'realdev_ofp_port'.
1628 * If 'realdev_ofp_port' is zero, then this function deconfigures 'ofport'
1629 * as a VLAN splinter port.
1631 * This function should be NULL if an implementation does not support it.
1633 int (*set_realdev)(struct ofport *ofport,
1634 ofp_port_t realdev_ofp_port, int vid);
1636 /* ## ------------------------ ## */
1637 /* ## OpenFlow meter functions ## */
1638 /* ## ------------------------ ## */
1640 /* These functions should be NULL if an implementation does not support
1641 * them. They must be all null or all non-null.. */
1643 /* Initializes 'features' to describe the metering features supported by
1645 void (*meter_get_features)(const struct ofproto *ofproto,
1646 struct ofputil_meter_features *features);
1648 /* If '*id' is UINT32_MAX, adds a new meter with the given 'config'. On
1649 * success the function must store a provider meter ID other than
1650 * UINT32_MAX in '*id'. All further references to the meter will be made
1651 * with the returned provider meter id rather than the OpenFlow meter id.
1652 * The caller does not try to interpret the provider meter id, giving the
1653 * implementation the freedom to either use the OpenFlow meter_id value
1654 * provided in the meter configuration, or any other value suitable for the
1657 * If '*id' is a value other than UINT32_MAX, modifies the existing meter
1658 * with that meter provider ID to have configuration 'config', while
1659 * leaving '*id' unchanged. On failure, the existing meter configuration
1660 * is left intact. */
1661 enum ofperr (*meter_set)(struct ofproto *ofproto, ofproto_meter_id *id,
1662 const struct ofputil_meter_config *config);
1664 /* Gets the meter and meter band packet and byte counts for maximum of
1665 * 'stats->n_bands' bands for the meter with provider ID 'id' within
1666 * 'ofproto'. The caller fills in the other stats values. The band stats
1667 * are copied to memory at 'stats->bands' provided by the caller. The
1668 * number of returned band stats is returned in 'stats->n_bands'. */
1669 enum ofperr (*meter_get)(const struct ofproto *ofproto,
1670 ofproto_meter_id id,
1671 struct ofputil_meter_stats *stats);
1673 /* Deletes a meter, making the 'ofproto_meter_id' invalid for any
1675 void (*meter_del)(struct ofproto *, ofproto_meter_id);
1678 /* ## -------------------- ## */
1679 /* ## OpenFlow 1.1+ groups ## */
1680 /* ## -------------------- ## */
1682 struct ofgroup *(*group_alloc)(void);
1683 enum ofperr (*group_construct)(struct ofgroup *);
1684 void (*group_destruct)(struct ofgroup *);
1685 void (*group_dealloc)(struct ofgroup *);
1687 enum ofperr (*group_modify)(struct ofgroup *, struct ofgroup *victim);
1689 enum ofperr (*group_get_stats)(const struct ofgroup *,
1690 struct ofputil_group_stats *);
1693 extern const struct ofproto_class ofproto_dpif_class;
1695 int ofproto_class_register(const struct ofproto_class *);
1696 int ofproto_class_unregister(const struct ofproto_class *);
1698 /* ofproto_flow_mod() returns this value if the flow_mod could not be processed
1699 * because it overlaps with an ongoing flow table operation that has not yet
1700 * completed. The caller should retry the operation later.
1702 * ofproto.c also uses this value internally for additional (similar) purposes.
1704 * This particular value is a good choice because it is large, so that it does
1705 * not collide with any errno value, but not large enough to collide with an
1706 * OFPERR_* value. */
1707 enum { OFPROTO_POSTPONE = 1 << 16 };
1708 BUILD_ASSERT_DECL(OFPROTO_POSTPONE < OFPERR_OFS);
1710 int ofproto_flow_mod(struct ofproto *, struct ofputil_flow_mod *)
1711 OVS_EXCLUDED(ofproto_mutex);
1712 void ofproto_add_flow(struct ofproto *, const struct match *,
1713 unsigned int priority,
1714 const struct ofpact *ofpacts, size_t ofpacts_len)
1715 OVS_EXCLUDED(ofproto_mutex);
1716 bool ofproto_delete_flow(struct ofproto *,
1717 const struct match *, unsigned int priority)
1718 OVS_EXCLUDED(ofproto_mutex);
1719 void ofproto_flush_flows(struct ofproto *);
1721 #endif /* ofproto/ofproto-provider.h */