1 # Copyright (c) 2003 Intel Corporation
4 # Redistribution and use in source and binary forms, with or without
5 # modification, are permitted provided that the following conditions are
8 # * Redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer.
11 # * Redistributions in binary form must reproduce the above
12 # copyright notice, this list of conditions and the following
13 # disclaimer in the documentation and/or other materials provided
14 # with the distribution.
16 # * Neither the name of the Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INTEL OR
24 # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
25 # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
26 # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
27 # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
28 # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
29 # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
30 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 # EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF
33 # YOUR JURISDICTION. It is licensee's responsibility to comply with any
34 # export regulations applicable in licensee's jurisdiction. Under
35 # CURRENT (May 2000) U.S. export regulations this software is eligible
36 # for export from the U.S. and can be downloaded by or otherwise
37 # exported or reexported worldwide EXCEPT to U.S. embargoed destinations
38 # which include Cuba, Iraq, Libya, North Korea, Iran, Syria, Sudan,
39 # Afghanistan and any other country to which the U.S. has embargoed
45 from Exceptions import *
47 from systeminfo import systeminfo
54 Writes out the following configuration files for the node:
57 /etc/sysconfig/network-scripts/ifcfg-eth0
58 /etc/resolv.conf (if applicable)
59 /etc/sysconfig/network
62 /etc/ssh/ssh_host_rsa_key
63 /etc/ssh/ssh_host_dsa_key
65 Expect the following variables from the store:
66 VERSION the version of the install
67 SYSIMG_PATH the path where the system image will be mounted
68 (always starts with TEMP_PATH)
69 PARTITIONS dictionary of generic part. types (root/swap)
70 and their associated devices.
71 PLCONF_DIR The directory to store the configuration file in
72 NETWORK_SETTINGS A dictionary of the values from the network
74 BOOT_CD_VERSION A tuple of the current bootcd version
76 Sets the following variables:
81 log.write( "\n\nStep: Install: Writing configuration files.\n" )
83 # make sure we have the variables we need
85 VERSION= vars["VERSION"]
87 raise ValueError, "VERSION"
89 SYSIMG_PATH= vars["SYSIMG_PATH"]
91 raise ValueError, "SYSIMG_PATH"
93 PARTITIONS= vars["PARTITIONS"]
94 if PARTITIONS == None:
95 raise ValueError, "PARTITIONS"
97 PLCONF_DIR= vars["PLCONF_DIR"]
99 raise ValueError, "PLCONF_DIR"
101 NETWORK_SETTINGS= vars["NETWORK_SETTINGS"]
102 if NETWORK_SETTINGS == "":
103 raise ValueError, "NETWORK_SETTINGS"
105 BOOT_CD_VERSION= vars["BOOT_CD_VERSION"]
106 if BOOT_CD_VERSION == "":
107 raise ValueError, "BOOT_CD_VERSION"
109 except KeyError, var:
110 raise BootManagerException, "Missing variable in vars: %s\n" % var
111 except ValueError, var:
112 raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
115 # we need to keys in PARTITIONS, root and swap, make sure
117 val= PARTITIONS["root"]
118 val= PARTITIONS["swap"]
119 val= PARTITIONS["vservers"]
120 val= PARTITIONS["mapper-root"]
121 val= PARTITIONS["mapper-swap"]
122 val= PARTITIONS["mapper-vservers"]
123 except KeyError, part:
124 log.write( "Missing partition in PARTITIONS: %s\n" % part )
128 log.write( "Setting local time to UTC\n" )
129 utils.sysexec( "chroot %s ln -sf /usr/share/zoneinfo/UTC /etc/localtime" % \
133 log.write( "Enabling ntp at boot\n" )
134 utils.sysexec( "chroot %s chkconfig ntpd on" % SYSIMG_PATH, log )
136 log.write( "Creating system directory %s\n" % PLCONF_DIR )
137 if not utils.makedirs( "%s/%s" % (SYSIMG_PATH,PLCONF_DIR) ):
138 log.write( "Unable to create directory\n" )
142 log.write( "Writing network configuration\n" )
143 write_network_configuration( vars, log )
145 # write out the modprobe.conf file for the system. make sure
146 # the order of the ethernet devices are listed in the same order
147 # as the boot cd loaded the modules. this is found in /tmp/loadedmodules
148 # ultimately, the order will only match the boot cd order if
149 # the kernel modules have the same name - which should be true for the later
150 # version boot cds because they use the same kernel version.
151 # older boot cds use a 2.4.19 kernel, and its possible some of the network
152 # module names have changed, in which case the system might not boot
153 # if the network modules are activated in a different order that the
155 log.write( "Writing /etc/modprobe.conf\n" )
156 write_modprobeconf_file( vars, log )
158 # dump the modprobe.conf file to the log (not to screen)
159 log.write( "Contents of new modprobe.conf file:\n" )
160 modulesconf_file= file("%s/etc/modprobe.conf" % SYSIMG_PATH, "r" )
161 contents= modulesconf_file.read()
162 log.write( contents + "\n" )
163 modulesconf_file.close()
164 modulesconf_file= None
165 log.write( "End contents of new modprobe.conf file.\n" )
167 log.write( "Writing system /etc/fstab\n" )
168 fstab= file( "%s/etc/fstab" % SYSIMG_PATH, "w" )
169 fstab.write( "%s none swap sw 0 0\n" % \
170 PARTITIONS["mapper-swap"] )
171 fstab.write( "%s / ext3 defaults 0 0\n" % \
172 PARTITIONS["mapper-root"] )
173 fstab.write( "%s /vservers ext3 tagxid,defaults 0 0\n" % \
174 PARTITIONS["mapper-vservers"] )
175 fstab.write( "none /proc proc defaults 0 0\n" )
176 fstab.write( "none /dev/shm tmpfs defaults 0 0\n" )
177 fstab.write( "none /dev/pts devpts defaults 0 0\n" )
178 fstab.write( "none /rcfs rcfs defaults 0 0\n" )
182 log.write( "Writing system /etc/issue\n" )
183 issue= file( "%s/etc/issue" % SYSIMG_PATH, "w" )
184 issue.write( "PlanetLab Node: \\n\n" )
185 issue.write( "Kernel \\r on an \\m\n" )
186 issue.write( "http://www.planet-lab.org\n\n" )
189 log.write( "Setting up authentication (non-ssh)\n" )
190 utils.sysexec( "chroot %s authconfig --nostart --kickstart --enablemd5 " \
191 "--enableshadow" % SYSIMG_PATH, log )
192 utils.sysexec( "sed -e 's/^root\:\:/root\:*\:/g' " \
193 "%s/etc/shadow > %s/etc/shadow.new" % \
194 (SYSIMG_PATH,SYSIMG_PATH), log )
195 utils.sysexec( "chroot %s mv " \
196 "/etc/shadow.new /etc/shadow" % SYSIMG_PATH, log )
197 utils.sysexec( "chroot %s chmod 400 /etc/shadow" % SYSIMG_PATH, log )
199 # if we are setup with dhcp, copy the current /etc/resolv.conf into
200 # the system image so we can run programs inside that need network access
203 method= vars['NETWORK_SETTINGS']['method']
208 utils.sysexec( "cp /etc/resolv.conf %s/etc/" % SYSIMG_PATH, log )
210 # the kernel rpm should have already done this, so don't fail the
211 # install if it fails
212 log.write( "Mounting /proc in system image\n" )
213 utils.sysexec_noerr( "mount -t proc proc %s/proc" % SYSIMG_PATH, log )
215 # mkinitrd references both /etc/modprobe.conf and /etc/fstab
216 # as well as /proc/lvm/global. The kernel RPM installation
217 # likely created an improper initrd since these files did not
218 # yet exist. Re-create the initrd here.
219 log.write( "Making initrd\n" )
221 # trick mkinitrd in case the current environment does not have device mapper
223 if not os.path.exists( "%s/%s" % (SYSIMG_PATH,PARTITIONS["mapper-root"]) ):
225 utils.makedirs( "%s/dev/mapper" % SYSIMG_PATH )
226 rootdev= file( "%s/%s" % (SYSIMG_PATH,PARTITIONS["mapper-root"]), "w" )
229 initrd= os.readlink( "%s/boot/initrd-boot" % SYSIMG_PATH )
230 kernel_version= initrd.replace("initrd-", "").replace(".img", "")
231 utils.removefile( "%s/boot/%s" % (SYSIMG_PATH, initrd) )
232 utils.sysexec( "chroot %s mkinitrd /boot/initrd-%s.img %s" % \
233 (SYSIMG_PATH, kernel_version, kernel_version), log )
235 if fake_root_lvm == 1:
236 utils.removefile( "%s/%s" % (SYSIMG_PATH,PARTITIONS["mapper-root"]) )
238 log.write( "Writing node install version\n" )
239 utils.makedirs( "%s/etc/planetlab" % SYSIMG_PATH )
240 ver= file( "%s/etc/planetlab/install_version" % SYSIMG_PATH, "w" )
241 ver.write( "%s\n" % VERSION )
244 log.write( "Creating ssh host keys\n" )
245 key_gen_prog= "/usr/bin/ssh-keygen"
247 log.write( "Generating SSH1 RSA host key:\n" )
248 key_file= "/etc/ssh/ssh_host_key"
249 utils.sysexec( "chroot %s %s -q -t rsa1 -f %s -C '' -N ''" %
250 (SYSIMG_PATH,key_gen_prog,key_file), log )
251 utils.sysexec( "chmod 600 %s/%s" % (SYSIMG_PATH,key_file), log )
252 utils.sysexec( "chmod 644 %s/%s.pub" % (SYSIMG_PATH,key_file), log )
254 log.write( "Generating SSH2 RSA host key:\n" )
255 key_file= "/etc/ssh/ssh_host_rsa_key"
256 utils.sysexec( "chroot %s %s -q -t rsa -f %s -C '' -N ''" %
257 (SYSIMG_PATH,key_gen_prog,key_file), log )
258 utils.sysexec( "chmod 600 %s/%s" % (SYSIMG_PATH,key_file), log )
259 utils.sysexec( "chmod 644 %s/%s.pub" % (SYSIMG_PATH,key_file), log )
261 log.write( "Generating SSH2 DSA host key:\n" )
262 key_file= "/etc/ssh/ssh_host_dsa_key"
263 utils.sysexec( "chroot %s %s -q -t dsa -f %s -C '' -N ''" %
264 (SYSIMG_PATH,key_gen_prog,key_file), log )
265 utils.sysexec( "chmod 600 %s/%s" % (SYSIMG_PATH,key_file), log )
266 utils.sysexec( "chmod 644 %s/%s.pub" % (SYSIMG_PATH,key_file), log )
272 def write_network_configuration( vars, log ):
274 Write out the network configuration for this machine:
276 /etc/sysconfig/network-scripts/ifcfg-eth0
277 /etc/resolv.conf (if applicable)
278 /etc/sysconfig/network
280 It is assumed the caller mounted the root partition and the vserver partition
281 starting on SYSIMG_PATH - it is not checked here.
283 The values to be used for the network settings are to be set in vars
284 in the variable 'NETWORK_SETTINGS', which is a dictionary
287 Key Used by this function
288 -----------------------------------------------
305 SYSIMG_PATH= vars["SYSIMG_PATH"]
306 if SYSIMG_PATH == "":
307 raise ValueError, "SYSIMG_PATH"
309 except KeyError, var:
310 raise BootManagerException, "Missing variable in vars: %s\n" % var
311 except ValueError, var:
312 raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
316 network_settings= vars['NETWORK_SETTINGS']
318 raise BootManagerException, "No network settings found in vars."
321 hostname= network_settings['hostname']
322 domainname= network_settings['domainname']
323 method= network_settings['method']
324 ip= network_settings['ip']
325 gateway= network_settings['gateway']
326 network= network_settings['network']
327 netmask= network_settings['netmask']
328 dns1= network_settings['dns1']
329 mac= network_settings['mac']
331 raise BootManagerException, "Missing value %s in network settings." % str(e)
335 dns2= network_settings['dns2']
340 log.write( "Writing /etc/hosts\n" )
341 hosts_file= file("%s/etc/hosts" % SYSIMG_PATH, "w" )
342 hosts_file.write( "127.0.0.1 localhost\n" )
343 if method == "static":
344 hosts_file.write( "%s %s.%s\n" % (ip, hostname, domainname) )
349 log.write( "Writing /etc/sysconfig/network-scripts/ifcfg-eth0\n" )
350 eth0_file= file("%s/etc/sysconfig/network-scripts/ifcfg-eth0" %
352 eth0_file.write( "DEVICE=eth0\n" )
353 if method == "static":
354 eth0_file.write( "BOOTPROTO=static\n" )
355 eth0_file.write( "IPADDR=%s\n" % ip )
356 eth0_file.write( "NETMASK=%s\n" % netmask )
357 eth0_file.write( "GATEWAY=%s\n" % gateway )
359 eth0_file.write( "BOOTPROTO=dhcp\n" )
360 eth0_file.write( "DHCP_HOSTNAME=%s\n" % hostname )
362 eth0_file.write( "HWADDR=%s\n" % mac )
363 eth0_file.write( "ONBOOT=yes\n" )
364 eth0_file.write( "USERCTL=no\n" )
368 if method == "static":
369 log.write( "Writing /etc/resolv.conf\n" )
370 resolv_file= file("%s/etc/resolv.conf" % SYSIMG_PATH, "w" )
372 resolv_file.write( "nameserver %s\n" % dns1 )
374 resolv_file.write( "nameserver %s\n" % dns2 )
375 resolv_file.write( "search %s\n" % domainname )
379 log.write( "Writing /etc/sysconfig/network\n" )
380 network_file= file("%s/etc/sysconfig/network" % SYSIMG_PATH, "w" )
381 network_file.write( "NETWORKING=yes\n" )
382 network_file.write( "HOSTNAME=%s.%s\n" % (hostname, domainname) )
383 if method == "static":
384 network_file.write( "GATEWAY=%s\n" % gateway )
390 def write_modprobeconf_file( vars, log, filename = "/etc/modprobe.conf"):
392 write out the system file /etc/modprobe.conf with the current
395 returns a tuple of the number of network driver lines and storage
396 driver lines written as (networkcount,storagecount)
399 # make sure we have this class loaded
400 from systeminfo import systeminfo
403 SYSIMG_PATH= vars["SYSIMG_PATH"]
404 if SYSIMG_PATH == "":
405 raise ValueError, "SYSIMG_PATH"
407 except KeyError, var:
408 raise BootManagerException, "Missing variable in vars: %s\n" % var
409 except ValueError, var:
410 raise BootManagerException, "Variable in vars, shouldn't be: %s\n" % var
413 # get the kernel version
414 initrd= os.readlink( "%s/boot/initrd-boot" % SYSIMG_PATH )
415 kernel_version= initrd.replace("initrd-", "").replace(".img", "")
417 sysinfo= systeminfo()
418 sysmods= sysinfo.get_system_modules(SYSIMG_PATH, kernel_version)
420 raise BootManagerException, "Unable to get list of system modules."
425 modulesconf_file= file("%s/%s" % (SYSIMG_PATH,filename), "w" )
428 if type == sysinfo.MODULE_CLASS_SCSI:
429 for a_mod in sysmods[type]:
431 modulesconf_file.write( "alias scsi_hostadapter %s\n" %
434 modulesconf_file.write( "alias scsi_hostadapter%d %s\n" %
436 scsi_count= scsi_count + 1
438 elif type == sysinfo.MODULE_CLASS_NETWORK:
439 for a_mod in sysmods[type]:
440 modulesconf_file.write( "alias eth%d %s\n" %
442 eth_count= eth_count + 1
444 modulesconf_file.close()
445 modulesconf_file= None
447 return (eth_count,scsi_count)