5 VINI/Trellis NodeManager plugin.
6 Create virtual links from the topo_rspec slice attribute.
15 from time import strftime
18 vinidir = "/usr/share/vini/"
19 setup_link_cmd = vinidir + "setup-egre-link"
20 teardown_link_cmd = vinidir + "teardown-egre-link"
21 setup_nat_cmd = vinidir + "setup-nat"
22 teardown_nat_cmd = vinidir + "teardown-nat"
31 return subprocess.call(cmd, shell=True);
35 Subnet used for virtual interfaces by setup-egre-link script
38 return "192.168.0.0 255.255.0.0"
42 Check for existence of interface d<key>x<nodeid>
44 def virtual_link(key, nodeid):
45 name = "d%sx%s" % (key, nodeid)
52 Create a "virtual link" for slice between here and nodeid.
53 The key is used to create the EGRE tunnel.
55 def setup_virtual_link(slice, key, rate, myid, nodeid, ipaddr, virtip, vnet):
56 logger.log("%s: Set up virtual link to node %d" % (slice, nodeid))
57 run(setup_link_cmd + " %s %s %s %s %s %s %s" % (slice, nodeid, ipaddr,
58 key, rate, virtip, vnet))
63 Tear down the "virtual link" for slice between here and nodeid.
65 def teardown_virtual_link(key, nodeid):
66 logger.log("topo: Tear down virtual link %sx%s" % (key, nodeid))
67 run(teardown_link_cmd + " %s %s" % (nodeid, key))
72 Called for all active virtual link interfaces, so they won't be cleaned up.
74 def refresh_virtual_link(nodeid, key):
75 name = "d%sx%s" % (key, nodeid)
76 if name in old_ifaces:
82 IP address of the NAT interface created inside the slice by the
85 def nat_inner_ip(key):
86 return "10.0.%s.2" % key
90 Check for existence of interface natx<key>
101 Create a NAT interface inside the sliver.
103 def setup_nat(slice, myid, key):
104 logger.log("%s: Set up NAT" % slice)
105 run(setup_nat_cmd + " %s %s %s" % (slice, myid, key))
110 Tear down the NAT interface identified by key
112 def teardown_nat(key):
113 logger.log("topo: Tear down NAT %s" % key)
114 run(teardown_nat_cmd + " %s" % key)
119 Called for all active NAT interfaces, so they won't be cleaned up.
121 def refresh_nat(key):
122 name = "natx%s" % (key)
123 if name in old_ifaces:
129 Clean up old virtual links (e.g., to nodes that have been deleted
132 def clean_up_old_virtual_links():
133 pattern1 = "d(.*)x(.*)"
134 pattern2 = "natx(.*)"
135 for iface in old_ifaces:
136 m = re.match(pattern1, iface)
138 key = int(m.group(1))
139 node = int(m.group(2))
140 teardown_virtual_link(key, node)
142 m = re.match(pattern2, iface)
144 key = int(m.group(1))
150 Not the safest thing to do, probably should use pickle() or something.
152 def convert_topospec_to_list(rspec):
157 Update virtual links for the slice
159 def update_links(slice, myid, topospec, key, netns):
160 topolist = convert_topospec_to_list(topospec)
161 for (nodeid, ipaddr, rate, myvirtip, remvirtip, virtnet) in topolist:
162 if not virtual_link(key, nodeid):
164 setup_virtual_link(slice, key, rate, myid, nodeid,
165 ipaddr, myvirtip, virtnet)
167 logger.log("%s: virtual link to node %s exists" % (slice, nodeid))
168 refresh_virtual_link(nodeid, key)
170 if not nat_exists(key):
172 setup_nat(slice, myid, key)
174 logger.log("%s: NAT exists" % slice)
179 Write /etc/vservers/<slicename>/spaces/net
181 def writeConf(slicename, value):
182 SLICEDIR="/etc/vservers/%s/" % slicename
183 SPACESDIR="%s/spaces/" % SLICEDIR
184 if os.path.exists(SLICEDIR):
185 if not os.path.exists(SPACESDIR):
189 logger.log("topo: could not create %s\n" % SPACESDIR)
191 f = open("%s/net" % SPACESDIR, "w")
192 f.write("%s\n" % value)
197 logger.log("%s: network namespace %s\n" % (slicename, STATUS))
201 Generate information for each interface in the sliver, in order to configure
204 def get_ifaces(hostname, myid, topospec, key):
206 topolist = convert_topospec_to_list(topospec)
207 for (nodeid, ipaddr, rate, myvirtip, remvirtip, virtnet) in topolist:
208 name = "a%sx%s" % (key, nodeid)
210 ifaces[name]['remote-ip'] = remvirtip
211 ifaces[name]['local-ip'] = myvirtip
212 ifaces[name]['network'] = virtnet
213 ifaces[name]['short-name'] = hostname.replace('.vini-veritas.net', '')
217 def write_header(f, myname, password):
218 f.write ("""! Configuration for %s
224 """ % (myname, strftime("%Y-%m-%d %H:%M:%S"), myname, password))
229 IP address of NAT gateway to outside world
232 return "10.0.%s.1" % key
235 IP address of the NAT interface inside the slice
238 return "10.0.%s.2" % key
242 Write zebra.conf file for Quagga
244 def write_zebra(filename, myname, ifaces, myid, key):
245 f = open(filename, 'w')
247 write_header(f, myname, password)
249 f.write ("enable password %s\n" % password)
258 access-list vty permit 127.0.0.1/32
268 Write ospfd.conf file for Quagga.
270 def write_ospf(filename, myname, ifaces):
271 f = open(filename, 'w')
273 write_header(f, myname, password)
279 ip ospf hello-interval 5
280 ip ospf dead-interval 10
281 ip ospf network non-broadcast
287 """ % ifaces[name]['local-ip'])
290 f.write (" neighbor %s\n" % ifaces[name]['remote-ip'])
293 net = ifaces[name]['network']
294 f.write (" network %s area 0\n" % net)
296 f.write(""" redistribute kernel
298 access-list vty permit 127.0.0.1/32
306 Write config files directly into the slice's file system.
308 def update_quagga_configs(slicename, hostname, myid, topo, key, netns):
309 ifaces = get_ifaces(hostname, myid, topo, key)
311 quagga_dir = "/vservers/%s/etc/quagga/" % slicename
312 if not os.path.exists(quagga_dir):
314 # Quagga not installed. Install it here? Chkconfig, sym links.
317 logger.log("topo: could not create %s\n" % quagga_dir)
320 write_zebra(quagga_dir + "zebra.conf.generated", hostname, ifaces,
322 write_ospf(quagga_dir + "ospfd.conf.generated", hostname, ifaces)
324 # Start up Quagga if we installed it earlier and netns = 1.
330 Write /etc/hosts in the sliver
332 def update_hosts(slicename, hosts):
333 hosts_file = "/vservers/%s/etc/hosts" % slicename
334 f = open(hosts_file, 'w')
340 def start(options, config):
341 run ("echo 1 > /proc/sys/net/ipv4/ip_forward")
346 Update the virtual links for a sliver if it has a 'netns' attribute,
347 an 'egre_key' attribute, and a 'topo_rspec' attribute.
349 Creating the virtual link depends on the contents of
350 /etc/vservers/<slice>/spaces/net. Update this first.
352 def GetSlivers(data):
353 global ifaces, old_ifaces
354 ifaces = old_ifaces = sioc.gifconf()
356 for sliver in data['slivers']:
358 for attribute in sliver['attributes']:
359 attrs[attribute['tagname']] = attribute['value']
361 netns = int(attrs['netns'])
362 writeConf(sliver['name'], netns)
366 if vserver.VServer(sliver['name']).is_running():
367 if 'egre_key' in attrs and 'topo_rspec' in attrs:
368 logger.log("topo: Update topology for slice %s" % \
370 update_links(sliver['name'], data['node_id'],
371 attrs['topo_rspec'], attrs['egre_key'], netns)
372 update_quagga_configs(sliver['name'], data['hostname'],
373 data['node_id'], attrs['topo_rspec'],
374 attrs['egre_key'], netns)
376 update_hosts(sliver['name'], attrs['hosts'])
378 logger.log("topo: sliver %s not running yet. Deferring." % \
381 clean_up_old_virtual_links()