2 REVISION=$(echo '$Revision: 18120 $' | sed -e 's,\$,,g' -e 's,^\w*:\s,,' )
7 # default values, tunable with command-line options
8 DEFAULT_FCDISTRO=centos5
9 DEFAULT_PLDISTRO=planetlab
10 DEFAULT_PERSONALITY=linux32
11 DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
12 DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
15 # default gpg path used in signing yum repo
16 DEFAULT_GPGPATH="/etc/planetlab"
17 # default email to use in gpg secring
18 DEFAULT_GPGUID="root@$( /bin/hostname )"
20 DEFAULT_TESTCONFIG="default"
22 # for publishing results, and the tests settings
24 y=$(hostname|sed -e s,inria,,)
26 if [ "$x" != "$y" ] ; then
27 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
28 DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
29 # this is where the buildurl is pointing towards
30 DEFAULT_WEBROOT="/build/"
31 DEFAULT_TESTMASTER="testmaster.onelab.eu"
33 DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
34 DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
35 # this is where the buildurl is pointing towards
36 DEFAULT_WEBROOT="/build/"
37 DEFAULT_TESTMASTER="manager.test.planet-lab.org"
41 # assuming vserver runs in UTC
42 DATE=$(date +'%Y.%m.%d')
44 # temporary - wrap a quick summary of suspicious stuff
45 # this is to focus on installation that go wrong
46 # use with care, a *lot* of other things can go bad as well
49 echo "******************** BEG SUMMARY"
52 # read a full log and tries to extract the interesting stuff
55 m_show_line=re.compile(".* (BEG|END) (RPM|VSERVER).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within vserver (BEG|END) .*|.* MAIN (BEG|END).*")
56 m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
57 m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
58 m_installing_end=re.compile('Installed:.*')
59 m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
60 m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
62 def summary (filename):
71 for line in f.xreadlines():
72 # first off : discard warnings related to doc
73 if m_installing_doc1.match(line):
74 (begin,end)=m_installing_doc1.match(line).groups()
76 if m_installing_doc2.match(line):
77 (begin,end)=m_installing_doc2.match(line).groups()
79 # unconditionnally show these lines
80 if m_show_line.match(line):
82 # an 'installing' line with messages afterwards : needs to be echoed
83 elif m_installing_err.match(line):
84 (installing,error)=m_installing_err.match(line).groups()
85 print '>>>',installing
88 # closing an 'installing' section
89 elif m_installing_end.match(line):
91 # any 'installing' line
92 elif m_installing_any.match(line):
94 installing=m_installing_any.match(line).group(1)
95 print '>>>',installing
97 # print lines when echo is true
99 if echo: print '>>>',line,
102 print 'Failed to analyze',filename
104 for arg in sys.argv[1:]:
107 echo "******************** END SUMMARY"
110 ### we might build on a box other than the actual web server
111 # utilities for handling the pushed material (rpms, logfiles, ...)
112 function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
113 function webpublish () { ssh root@${WEBHOST} "$@" ; }
114 function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $1 root@${WEBHOST}:$2 ; }
115 function webpublish_rsync_file () { rsync $VERBOSE $1 root@${WEBHOST}:$2 ; }
116 function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
117 function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
118 function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
120 # Notify recipient of failure or success, manage various stamps
123 # early stage ? - let's not create /build/@PLDISTRO@
124 if test -z "$WEBLOG" ; then
127 WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
128 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
130 webpublish mkdir -p $WEBBASE ||:
131 webpublish_cp_local_to_remote $LOG $WEBLOG ||:
132 summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
133 (echo -n "============================== $COMMAND: failure at " ; date ; \
134 webpublish tail --lines=1000 $WEBLOG) | \
135 webpublish_cp_stdin_to_file $WEBBASE.ko ||:
136 if [ -n "$MAILTO" ] ; then
138 echo "Subject: Failures with $MAIL_SUBJECT $BASE on $(hostname)" ; \
139 echo "See full build log at $WEBBASE_URL/log.txt" ; \
140 echo "and tail version at $WEBBASE_URL.ko" ; \
141 echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ; \
142 echo "........................................" ; \
143 webpublish tail --lines=1000 $WEBLOG ) | \
149 function success () {
151 # early stage ? - let's not create /build/@PLDISTRO@
152 if test -z "$WEBLOG" ; then
155 WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
157 webpublish mkdir -p $WEBBASE
158 webpublish_cp_local_to_remote $LOG $WEBLOG
159 summary $LOG | webpublish_append_stdin_to_file $WEBLOG
160 if [ -n "$DO_TEST" ] ; then
162 echo "Successfully built and tested" ; \
163 echo "See full build log at $WEBBASE_URL/log.txt" ; \
164 echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ; \
165 ) | webpublish_cp_stdin_to_file $WEBBASE.pass
166 webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
169 echo "Successful package-only build, no test requested" ; \
170 echo "See full build log at $WEBBASE_URL/log.txt" ; \
171 ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
172 webpublish rm -f $WEBBASE.ko
174 if [ -n "$MAILTO" ] ; then
176 echo "Subject: Success with ${MAIL_SUBJECT} ${BASE} on $(hostname)" ; \
177 echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
178 echo "See full build log at $WEBBASE_URL/log.txt" ; \
179 [ -n "$DO_TEST" ] && echo "See complete set of testlogs at $WEBBASE_URL/testlogs" ) \
182 # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
183 # doesn't fix the problem, I'll remove it -- Sapan.
188 # run in the vserver - do not manage success/failure, will be done from the root ctx
193 echo -n "============================== Starting $COMMAND:build on "
199 echo "Running make IN $(pwd)"
201 # stuff our own variable settings
202 if echo $BUILD_SCM_URL | grep -q git ; then
203 MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
205 MAKEVARS=("build-SVNPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
207 MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
208 MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
209 MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
210 MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
211 MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
212 MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
213 MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
215 MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
218 make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
220 make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
222 make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
226 # this was formerly run in the myplc-devel chroot but now is run in the root context,
227 # this is so that the .ssh config gets done manually, and once and for all
228 function run_log () {
233 echo "============================== BEG $COMMAND:run_log on $(date)"
235 ### the URL to the RPMS/<arch> location
236 # f12 now has everything in i686; try i386 first as older fedoras have both
238 for a in i386 i686 x86_64; do
239 archdir=/vservers/$BASE/build/RPMS/$a
240 if [ -d $archdir ] ; then
241 # where was that installed
242 url=$(echo $archdir | sed -e "s,/vservers/${BASE}/build,${WEBPATH}/${BASE},")
243 url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
248 if [ -z "$url" ] ; then
249 echo "$COMMAND: Cannot locate arch URL for testing"
254 testmaster_ssh="root@${TESTMASTER}"
256 # test directory name on test box
260 ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
262 # check it out in the build
263 vserver $BASE exec make -C /build tests-module
265 # push it onto the testmaster - just the 'system' subdir is enough
266 rsync --verbose --archive /vservers/$BASE/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
267 # toss the build in the bargain, so the tests don't need to mess with extracting it
268 rsync --verbose --archive /vservers/$BASE/build/MODULES/build ${testmaster_ssh}:${BASE}/
270 # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
272 for config in ${TESTCONFIG} ; do
273 configs="$configs --config $config"
275 test_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
277 # need to proceed despite of set -e
279 # passing the build_scm_url should not be needed anymore
280 ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $configs $test_env $VERBOSE --all || success=
282 # gather logs in the build vserver
283 mkdir -p /vservers/$BASE/build/testlogs
284 rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ /vservers/$BASE/build/testlogs
285 # push them to the build web
286 chmod -R a+r /vservers/$BASE/build/testlogs/
287 webpublish_rsync_dir /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
289 echo "============================== END $COMMAND:run_log on $(date)"
291 if [ -z "$success" ] ; then
292 echo "Tests have failed - bailing out"
298 function in_root_context () {
299 rpm -q util-vserver > /dev/null
302 # this part won't work if WEBHOST does not match the local host
303 # would need to be made webpublish_* compliant
304 # but do we really need this feature anyway ?
305 function sign_node_packages () {
307 echo "Signing node packages"
311 repository=$WEBPATH/$BASE/RPMS/
312 # the rpms that need signing
314 # and the corresponding stamps
317 for package in $(find $repository/ -name '*.rpm') ; do
318 stamp=$repository/signed-stamps/$(basename $package).signed
319 # If package is newer than signature stamp
320 if [ $package -nt $stamp ] ; then
321 new_rpms="$new_rpms $package"
322 new_stamps="$new_stamps $stamp"
324 # Or than createrepo database
325 [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
328 if [ -n "$new_rpms" ] ; then
329 # Create a stamp once the package gets signed
330 mkdir $repository/signed-stamps 2> /dev/null
332 # Sign RPMS. setsid detaches rpm from the terminal,
333 # allowing the (hopefully blank) GPG password to be
334 # entered from stdin instead of /dev/tty.
336 --define "_signature gpg" \
337 --define "_gpg_path $GPGPATH" \
338 --define "_gpg_name $GPGUID" \
339 --resign $new_rpms && touch $new_stamps
342 # Update repository index / yum metadata.
343 if [ -n "$need_createrepo" ] ; then
344 echo "Indexing node packages after signing"
345 if [ -f $repository/yumgroups.xml ] ; then
346 createrepo --quiet -g yumgroups.xml $repository
348 createrepo --quiet $repository
353 function show_env () {
355 echo FCDISTRO=$FCDISTRO
356 echo PLDISTRO=$PLDISTRO
357 echo PERSONALITY=$PERSONALITY
359 echo BUILD_SCM_URL=$BUILD_SCM_URL
360 echo MAKEVARS="${MAKEVARS[@]}"
361 echo DRY_RUN="$DRY_RUN"
362 echo PLDISTROTAGS="$PLDISTROTAGS"
363 # this does not help, it's not yet set when we run show_env
364 #echo WEBPATH="$WEBPATH"
365 echo TESTBUILDURL="$TESTBUILDURL"
366 echo WEBHOST="$WEBHOST"
367 if in_root_context ; then
368 echo PLDISTROTAGS="$PLDISTROTAGS"
370 if [ -f /build/$PLDISTROTAGS ] ; then
371 echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
372 cat /build/$PLDISTROTAGS
373 echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
375 echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
381 function setupssh () {
385 if [ -f ${sshkey} ] ; then
386 SSHDIR=/vservers/${base}/root/.ssh
388 cp $sshkey ${SSHDIR}/thekey
390 echo " IdentityFile ~/.ssh/thekey"; \
391 echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
393 chmod 400 ${SSHDIR}/*
395 echo "WARNING : could not find provided ssh key $sshkey - ignored"
400 echo "Usage: $COMMAND [option] [var=value...] make-targets"
401 echo "This is $REVISION"
402 echo "Supported options"
403 echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
404 echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
405 echo " -p personality - defaults to $DEFAULT_PERSONALITY"
406 echo " -m mailto - no default"
407 echo " -s build_scm_url - git or svn URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
408 echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
409 echo " -b base - defaults to $DEFAULT_BASE"
410 echo " @NAME@ replaced as appropriate"
411 echo " -o base: (overwrite) do not re-create vserver, re-use base instead"
412 echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
413 echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
414 echo " -w webpath - defaults to $DEFAULT_WEBPATH"
415 echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
416 echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
417 echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
418 echo " -y - sign yum repo in webpath"
419 echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
420 echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
421 echo " -K svnsshkey - specify key to use when svn+ssh:// URLs are used for SVNPATH"
422 echo " -S - do not publish source rpms"
423 echo " -B - run build only"
424 echo " -T - run test only"
425 echo " -n - dry-run: -n passed to make - vserver gets created though - no mail sent"
426 echo " -v - be verbose"
427 echo " -7 - uses weekday-@FCDISTRO@ as base"
428 echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
445 while getopts "f:d:p:m:s:t:b:o:c:w:W:r:M:yg:u:K:SBTnv7i:" opt ; do
447 f) FCDISTRO=$OPTARG ;;
448 d) PLDISTRO=$OPTARG ;;
449 p) PERSONALITY=$OPTARG ;;
451 s) BUILD_SCM_URL=$OPTARG ;;
452 t) PLDISTROTAGS=$OPTARG ;;
454 o) OVERBASE=$OPTARG ;;
455 c) TESTCONFIG="$TESTCONFIG $OPTARG" ;;
456 w) WEBPATH=$OPTARG ;;
457 W) TESTBUILDURL=$OPTARG ;;
458 r) WEBROOT=$OPTARG ;;
459 M) TESTMASTER=$OPTARG ;;
460 y) SIGNYUMREPO=true ;;
461 g) GPGPATH=$OPTARG ;;
463 K) SSH_KEY=$OPTARG ;;
464 S) PUBLISH_SRPMS="" ;;
468 v) set -x ; VERBOSE="-v" ;;
469 7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
475 # preserve options for passing them again later, together with expanded base
477 toshift=$(($OPTIND - 1))
478 arg=1; while [ $arg -le $toshift ] ; do options=(${options[@]} "$1") ; shift; arg=$(($arg+1)) ; done
480 # allow var=value stuff;
481 for target in "$@" ; do
482 # check if contains '='
483 target1=$(echo $target | sed -e s,=,,)
484 if [ "$target" = "$target1" ] ; then
485 MAKETARGETS=(${MAKETARGETS[@]} "$target")
487 MAKEVARS=(${MAKEVARS[@]} "$target")
492 [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
493 [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
494 [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
495 [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
496 [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
497 [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
498 [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
499 [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
500 [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
501 [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
502 [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
503 [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
504 [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
505 [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
507 [ -n "$DRY_RUN" ] && MAILTO=""
509 if [ -n "$OVERBASE" ] ; then
510 sedargs="-e s,@DATE@,${DATE},g"
511 BASE=$(echo ${OVERBASE} | sed $sedargs)
513 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
514 BASE=$(echo ${BASE} | sed $sedargs)
517 ### elaborate mail subject
518 if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
519 MAIL_SUBJECT="complete"
520 elif [ -n "$DO_BUILD" ] ; then
521 MAIL_SUBJECT="package-only"
522 elif [ -n "$DO_TEST" ] ; then
523 MAIL_SUBJECT="test-only"
525 if [ -n "$OVERBASE" ] ; then
526 MAIL_SUBJECT="$MAIL_SUBJECT incremental run on"
528 MAIL_SUBJECT="$MAIL_SUBJECT fresh build"
531 ### compute WEBHOST from TESTBUILDURL
532 # this is to avoid having to change the builds configs everywhere
533 # simplistic way to extract hostname from a URL
534 WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
536 if ! in_root_context ; then
538 echo "==================== Within vserver BEG $(date)"
540 echo "==================== Within vserver END $(date)"
544 # we run in the root context :
545 # (*) create or check for the vserver to use
546 # (*) copy this command in the vserver
549 if [ -n "$OVERBASE" ] ; then
550 ### Re-use a vserver (finish an unfinished build..)
551 if [ ! -d /vservers/${BASE} ] ; then
552 echo $COMMAND : cannot find vserver $BASE
555 # manage LOG - beware it might be a symlink so nuke it first
556 LOG=/vservers/${BASE}.log.txt
560 echo "XXXXXXXXXX $COMMAND: using existing vserver $BASE" $(date)
561 # start in case e.g. we just rebooted
562 vserver ${BASE} start || :
563 # retrieve environment from the previous run
564 FCDISTRO=$(vserver ${BASE} exec /build/getdistroname.sh)
565 BUILD_SCM_URL=$(vserver ${BASE} exec make --no-print-directory -C /build stage1=skip +build-SVNPATH +build-GITPATH)
566 # for efficiency, crop everything in one make run
567 tmp=/tmp/${BASE}-env.sh
568 vserver ${BASE} exec make --no-print-directory -C /build stage1=skip \
569 ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
573 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
574 if echo $BUILD_SCM_URL | grep -q git ; then
575 vserver $BASE exec bash -c "cd /build; git pull; make tests-clean"
577 vserver $BASE exec svn update /build
579 # make sure we refresh the tests place in case it has changed
580 rm -f /build/MODULES/tests
581 options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
582 [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
583 [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
584 [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
585 [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
586 [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
589 # create vserver: check it does not exist yet
591 while [ -d /vservers/${BASE}${i} ] ; do
592 # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
593 [ -z ${i} ] && BASE=${BASE}-n
595 if [ $i -gt 100 ] ; then
596 echo "$COMMAND: Failed to create build vserver /vservers/${BASE}${i}"
602 # manage LOG - beware it might be a symlink so nuke it first
603 LOG=/vservers/${BASE}.log.txt
607 echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
610 ### extract the whole build - much simpler
611 tmpdir=/tmp/$COMMAND-$$
612 if echo $BUILD_SCM_URL | grep -q git ; then
613 GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
614 GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
615 GIT_TAG=${GIT_TAG:-master}
616 mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
618 svn export $BUILD_SCM_URL $tmpdir
622 ./vbuild-init-vserver.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE}
626 # Extract build again - in the vserver
627 [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
628 if echo $BUILD_SCM_URL | grep -q git ; then
629 vserver $BASE exec bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
631 vserver $BASE exec svn checkout ${BUILD_SCM_URL} /build
634 # install ssh key in vserver
635 echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
637 # The log inside the vserver contains everything
638 LOG2=/vservers/${BASE}/log.txt
639 (echo "==================== BEG VSERVER Transcript of vserver creation" ; \
641 echo "==================== END VSERVER Transcript of vserver creation" ; \
642 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
643 ### not too nice : nuke the former log, symlink it to the new one
644 rm $LOG; ln -s $LOG2 $LOG
649 sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
650 WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
651 webpublish mkdir -p ${WEBPATH}
653 # where to store the log for web access
654 WEBBASE=${WEBPATH}/${BASE}
655 WEBLOG=${WEBPATH}/${BASE}/log.txt
656 # compute the log URL - inserted in the mail messages for convenience
657 WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
659 if [ -n "$DO_BUILD" ] ; then
661 # invoke this command into the build directory of the vserver
662 cp $COMMANDPATH /vservers/${BASE}/build/
664 # invoke this command in the vserver for building (-T)
665 vserver ${BASE} exec chmod +x /build/$COMMAND
666 vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
669 # publish to the web so run_log can find them
671 webpublish rm -rf $WEBPATH/$BASE
672 webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
673 webpublish_rsync_dir /vservers/$BASE/build/RPMS/ $WEBPATH/$BASE/RPMS/
674 [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir /vservers/$BASE/build/SRPMS/ $WEBPATH/$BASE/SRPMS/
675 # publish myplc-release if this exists
676 release=/vservers/$BASE/build/myplc-release
677 [ -f $release ] && webpublish_rsync_file $release $WEBPATH/$BASE
680 # create yum repo and sign packages.
681 if [ -n "$SIGNYUMREPO" ] ; then
682 # this script does not yet support signing on a remote (webhost) repo
683 sign_here=$(hostname) ; sign_web=$(webpublish hostname)
684 if [ "$hostname" = "$sign_here" ] ; then
687 echo "$COMMAND does not support signing on a remote yum repo"
688 echo "you might want to turn off the -y option, or run this on the web server box itself"
693 if [ -n "$DO_TEST" ] ; then
699 echo "==================== MAIN END $(date)"