a9c3402ac9e61d4bec91d2afbdcbe3a4beafeccc
[sliver-openvswitch.git] / xenserver / vswitch-xen.spec
1 # Spec file for vswitch and related programs.
2
3 # Copyright (C) 2009 Nicira Networks, Inc.
4 #
5 # Copying and distribution of this file, with or without modification,
6 # are permitted in any medium without royalty provided the copyright
7 # notice and this notice are preserved.  This file is offered as-is,
8 # without warranty of any kind.
9
10 # When building, the rpmbuild command line should define
11 # vswitch_version, xen_version, and build_number using -D arguments.
12 # for example:
13 #
14 #    rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
15 #
16 %define version %{vswitch_version}-%{xen_version}
17 %define _prefix /root/vswitch
18
19 Name: vswitch
20 Summary: Virtual switch
21 Group: System Environment/Daemons
22 URL: http://www.openvswitch.org/
23 Version: %{vswitch_version}
24
25 # The entire source code is ASL 2.0 except datapath/ which is GPLv2
26 License: ASL 2.0 and GPLv2
27 Release: 1
28 Source: openvswitch-%{vswitch_version}.tar.gz
29 Buildroot: /tmp/vswitch-xen-rpm
30 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
31
32 %description
33 The vswitch provides standard network bridging functions augmented with
34 support for the OpenFlow protocol for remote per-flow control of
35 traffic.
36
37 %prep
38 %setup -q -n openvswitch-%{vswitch_version}
39
40 %build
41 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
42 make %{_smp_mflags}
43
44 %install
45 rm -rf $RPM_BUILD_ROOT
46 make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
47 install -d -m 755 $RPM_BUILD_ROOT/etc
48 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
49 install -m 755 xenserver/etc_init.d_vswitch \
50          $RPM_BUILD_ROOT/etc/init.d/vswitch
51 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
52          $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
53 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
54 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
55 install -m 755 xenserver/etc_logrotate.d_vswitch \
56          $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
57 install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
58 install -m 755 xenserver/etc_profile.d_vswitch.sh \
59          $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
60 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
61 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
62          $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
63 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
64 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
65              $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
66 install -m 755 xenserver/etc_xensource_scripts_vif \
67              $RPM_BUILD_ROOT%{_prefix}/scripts/vif
68 install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
69                $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
70 install -m 755 xenserver/usr_sbin_xen-bugtool \
71              $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
72 install -m 755 xenserver/usr_sbin_brctl \
73              $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
74 install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
75          $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
76 install -m 644 \
77         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
78                $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
79
80 install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
81 find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
82
83 # Get rid of stuff we don't want to make RPM happy.
84 rm -rf \
85     $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
86     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
87     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
88     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
89     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
90     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
91     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
92     $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
93     $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
94     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
95     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
96     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
97     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
98     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
99     $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
100
101 %clean
102 rm -rf $RPM_BUILD_ROOT
103
104 %pre
105 if [ ! -f /etc/xensource-inventory ]; then
106     printf "XenSource inventory not present in /etc/xensource-inventory"
107     exit 1
108 fi
109
110 if [ "$1" = "1" ]; then
111     if ! md5sum -c --status <<EOF
112 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
113 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
114 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
115 EOF
116     then
117         printf "\nThe original XenServer scripts replaced by this package\n"
118         printf "are different than expected.  This could lead to unexpected\n"
119         printf "behavior of your server.  Unless you are sure you know what\n"
120         printf "you are doing, it is highly recommended that you remove this\n"
121         printf "package immediately after the install completes, which\n"
122         printf "will restore the XenServer scripts that you were previously\n"
123         printf "using.\n\n"
124     fi
125     if test "`/usr/sbin/brctl --version`" != "bridge-utils, 1.1"; then
126 cat <<EOF
127
128 /usr/sbin/brctl replaced by this package reports the following version:
129
130 `/usr/sbin/brctl --version`
131
132 The expected version was:
133
134 bridge-utils, 1.1
135
136 Unless you are sure you know what you are doing, it is highly recommended that
137 you remove this package immediately after the install completes, which will
138 restore the original /usr/sbin/brctl.
139
140 EOF
141     fi
142 fi
143
144 if test ! -e /etc/ovs-vswitch.dbcache; then
145     if test "$1" = 1; then
146         printf "Creating xapi database cache...  "
147     else
148         printf "warning: Open vSwitch is being re-installed or upgraded,\n"
149         printf "         but the xapi database cache is missing.\n"
150         printf "Re-creating xapi database cache...  "
151     fi
152
153     source /etc/xensource-inventory
154     if python - "$INSTALLATION_UUID" <<EOF
155 import XenAPI
156 import pickle
157 import sys
158
159 session = XenAPI.xapi_local()
160 try:
161     session.xenapi.login_with_password("root", "")
162
163     vlans = session.xenapi.VLAN.get_all_records()
164     bonds = session.xenapi.Bond.get_all_records()
165     pifs = session.xenapi.PIF.get_all_records()
166     networks = session.xenapi.network.get_all_records()
167     host = session.xenapi.host.get_by_uuid(sys.argv[1])
168 finally:
169     session.xenapi.session.logout()
170
171 dbcache_file = "/etc/ovs-vswitch.dbcache"
172 f = open(dbcache_file, 'w')
173 pickle.dump({'vlans': vlans,
174              'bonds': bonds,
175              'pifs': pifs,
176              'networks': networks}, f)
177 pickle.dump({'host': host}, f)
178 f.close()
179 EOF
180     then
181         printf "done.\n"
182     else
183         printf "FAILED\n"
184         printf "Open vSwitch can only be installed on a XenServer that\n"
185         printf "has connectivity to xapi on the pool master.  Please\n"
186         printf "fix connectivity to the pool master, then try again.\n"
187         exit 1
188     fi
189 fi
190
191 %post
192 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
193     cat >>/etc/sysctl.conf <<EOF
194 # This works around an issue in xhad, which binds to a particular
195 # Ethernet device, which in turn causes ICMP port unreachable messages
196 # if packets are received are on the wrong interface, which in turn
197 # can happen if we send out ARP replies on every interface (as Linux
198 # does by default) instead of just on the interface that has the IP
199 # address being ARPed for, which this sysctl setting in turn works
200 # around.
201 #
202 # Bug #1378.
203 net.ipv4.conf.all.arp_filter = 1
204 EOF
205 fi
206
207 # Ensure ovs-vswitchd.conf exists
208 touch /etc/ovs-vswitchd.conf
209
210 # Create default or update existing /etc/sysconfig/vswitch.
211 SYSCONFIG=/etc/sysconfig/vswitch
212 TEMPLATE=/root/vswitch/scripts/sysconfig.template
213 if [ ! -e $SYSCONFIG ]; then
214     cp $TEMPLATE $SYSCONFIG
215 else
216     for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
217     do
218         if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
219             echo >> $SYSCONFIG
220             sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
221         fi
222     done
223 fi
224
225 # Replace XenServer files by our versions.
226 mkdir -p %{_prefix}/xs-original \
227     || printf "Could not create script backup directory.\n"
228 for f in \
229     /opt/xensource/libexec/interface-reconfigure \
230     /etc/xensource/scripts/vif \
231     /usr/sbin/xen-bugtool \
232     /usr/sbin/brctl
233 do
234     s=$(basename "$f")
235     t=$(readlink "$f")
236     if [ "$t" != "%{_prefix}/scripts/$s" ]; then
237         mv "$f" %{_prefix}/xs-original/ \
238             || printf "Could not save original XenServer $s script\n"
239         ln -s "%{_prefix}/scripts/$s" "$f" \
240             || printf "Could not link to vSwitch $s script\n"
241     fi
242 done
243
244 # Install xsconsole plugin
245 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
246 if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
247     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
248     ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
249 fi
250
251 # Ensure all required services are set to run
252 for s in vswitch vswitch-xapi-update; do
253     if chkconfig --list $s >/dev/null 2>&1; then
254         chkconfig --del $s || printf "Could not remove $s init script."
255     fi
256     chkconfig --add $s || printf "Could not add $s init script."
257     chkconfig $s on || printf "Could not enable $s init script."
258 done
259
260 if [ "$1" = "1" ]; then    # $1 = 2 for upgrade
261     printf "\nYou MUST reboot the server NOW to complete the change to the\n"
262     printf "the vSwitch.  Attempts to modify networking on the server\n"
263     printf "or any hosted VM will fail until after the reboot and could\n"
264     printf "leave the server in an state requiring manual recovery.\n\n"
265 else
266     printf "\nTo use the new vSwitch, you should reboot the server\n"
267     printf "now.  Failure to do so may result in incorrect operation.\n\n"
268 fi
269
270 %preun
271 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
272     for s in vswitch vswitch-xapi-update; do
273         chkconfig --del $s || printf "Could not remove $s init script."
274     done
275 fi
276
277
278 %postun
279 if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
280
281     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
282         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
283         /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
284         || printf "Could not remove vSwitch xsconsole plugin.\n"
285
286     # Restore original XenServer scripts
287     for f in \
288         /opt/xensource/libexec/interface-reconfigure \
289         /etc/xensource/scripts/vif \
290         /usr/sbin/xen-bugtool \
291         /usr/sbin/brctl
292     do
293         s=$(basename "$f")
294         if [ ! -f "%{_prefix}/xs-original/$s" ]; then
295             printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
296             printf "Could not restore original XenServer script.\n"
297         else
298             (rm -f "$f" \
299                 && mv "%{_prefix}/xs-original/$s" "$f") \
300                 || printf "Could not restore original XenServer $s script.\n"
301         fi
302     done
303
304     find  %{_prefix} -type d -depth -exec rmdir \{\} \; \
305         || printf "Could not remove vSwitch install directory.\n"
306
307     # Remove all configuration and log files
308     rm -f /etc/ovs-vswitchd.conf
309     rm -f /etc/sysconfig/vswitch
310     rm -f /var/log/vswitch*
311     rm -f /etc/ovs-vswitchd.cacert
312
313     printf "\nYou MUST reboot the server now to complete the change to\n"
314     printf "standard Xen networking.  Attempts to modify networking on the\n"
315     printf "server or any hosted VM will fail until after the reboot and\n"
316     printf "could leave the server in a state requiring manual recovery.\n\n"
317 fi
318
319
320 %files
321 %defattr(-,root,root)
322 /etc/init.d/vswitch
323 /etc/init.d/vswitch-xapi-update
324 /etc/xapi.d/plugins/vswitch-cfg-update
325 /etc/logrotate.d/vswitch
326 /etc/profile.d/vswitch.sh
327 /root/vswitch/kernel_modules/brcompat_mod.ko
328 /root/vswitch/kernel_modules/openvswitch_mod.ko
329 /root/vswitch/kernel_modules/veth_mod.ko
330 /root/vswitch/scripts/dump-vif-details
331 /root/vswitch/scripts/interface-reconfigure
332 /root/vswitch/scripts/vif
333 /root/vswitch/scripts/xen-bugtool
334 /root/vswitch/scripts/XSFeatureVSwitch.py
335 /root/vswitch/scripts/brctl
336 /root/vswitch/scripts/sysconfig.template
337 # Following two files are generated automatically by rpm.  We don't
338 # really need them and they won't be used on the XenServer, but there
339 # isn't an obvious place to get rid of them since they are generated
340 # after the install script runs.  Since they are small, we just
341 # include them.
342 /root/vswitch/scripts/XSFeatureVSwitch.pyc
343 /root/vswitch/scripts/XSFeatureVSwitch.pyo
344 /root/vswitch/sbin/ovs-brcompatd
345 /root/vswitch/sbin/ovs-vswitchd
346 /root/vswitch/bin/ovs-appctl
347 /root/vswitch/bin/ovs-cfg-mod
348 /root/vswitch/bin/ovs-dpctl
349 /root/vswitch/bin/ovs-ofctl
350 /root/vswitch/share/man/man5/ovs-vswitchd.conf.5
351 /root/vswitch/share/man/man8/ovs-appctl.8
352 /root/vswitch/share/man/man8/ovs-brcompatd.8
353 /root/vswitch/share/man/man8/ovs-cfg-mod.8
354 /root/vswitch/share/man/man8/ovs-dpctl.8
355 /root/vswitch/share/man/man8/ovs-ofctl.8
356 /root/vswitch/share/man/man8/ovs-vswitchd.8