if ARCH_SA1100 menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). config ASSABET_NEPONSET bool "Include support for Neponset" depends on SA1100_ASSABET help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (Assabet) with the SA-1111 Development Board (Nepon). config SA1100_ADSBITSY bool "ADS Bitsy" help Say Y here if you are using Applied Data Systems Intel(R) StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ - like platform. See for more information. config SA1100_BRUTUS bool "Brutus" help Say Y here if you are using the Intel(R) StrongARM(R) SA-1100 Microprocessor Development Board (also known as the Brutus). config SA1100_CERF bool "CerfBoard" help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: . Say Y if configuring for an Intrinsyc CerfBoard. Say N otherwise. choice prompt "Cerf Flash available" depends on SA1100_CERF default SA1100_CERF_FLASH_8MB config SA1100_CERF_FLASH_8MB bool "8MB" config SA1100_CERF_FLASH_16MB bool "16MB" config SA1100_CERF_FLASH_32MB bool "32MB" endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" depends on ARCH_SA1100 help Say Y here to support the Sharp Zaurus SL5500 PDAs. config SA1100_H3100 bool "Compaq iPAQ H3100" help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the Linux port to this machine can be found at: config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the Linux port to this machine can be found at: config SA1100_H3800 bool "Compaq iPAQ H3800" help Say Y here if you intend to run this kernel on the Compaq iPAQ H3800 series handheld computer. Information about this machine and the Linux port to this machine can be found at: config SA1100_H3XXX bool depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800 default y #dep_bool ' Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100 #dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100 config SA1100_EXTENEX1 bool "Extenex HandHeld Theater (Squashtail)" config SA1100_EXTENEX1_16MB bool "Support 16 MB of DRAM (not just 8)" depends on SA1100_EXTENEX1 config SA1100_FLEXANET bool "FlexaNet" help Say Y here if you intend to run this kernel on the FlexaNet handheld instruments. Information about this machine can be found at: . config SA1100_FREEBIRD bool "FreeBird-v1.1" help Support the FreeBird board used in Coventive embedded products. See Documentation/arm/SA1100/Freebird for more. config SA1100_GRAPHICSCLIENT bool "GraphicsClient Plus" help Say Y here if you are using an Applied Data Systems Intel(R) StrongARM(R) SA-1100 based Graphics Client SBC. See for information on this system. config SA1100_GRAPHICSMASTER bool "GraphicsMaster" help Say Y here if you are using an Applied Data Systems Intel(R) StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111 StrongARM companion chip. See for information on this system. config SA1100_BADGE4 bool "HP Labs BadgePAD 4" help Say Y here if you want to build a kernel for the HP Laboratories BadgePAD 4. config SA1100_JORNADA720 bool "HP Jornada 720" help Say Y here if you want to build a kernel for the HP Jornada 720 handheld computer. See for details. config SA1100_HACKKIT bool "HackKit Core CPU Board" help Say Y here to support the HackKit Core CPU Board ; config SA1100_HUW_WEBPANEL bool "HuW WebPanel" help Say Y here to support the HuW Webpanel produced by Hoeft & Wessel AG. English-language website is at ; credits and build instructions at Documentation/arm/SA1100/HUW_WEBPANEL. config SA1100_ITSY bool "Itsy" help Say Y here if you are using the Compaq Itsy experimental pocket computer. See for more information. config SA1100_LART bool "LART" help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See for information on the LART. config SA1100_NANOENGINE bool "nanoEngine" help The nanoEngine is a StrongARM 1110-based single board computer from Bright Star Engineering. More information is available at: . Say Y if configuring for a nanoEngine. Say N otherwise. config SA1100_OMNIMETER bool "OmniMeter" help Say Y here if you are using the inhand electronics OmniMeter. See for details. config SA1100_PANGOLIN bool "Pangolin" help Pangolin is a StrongARM 1110-based evaluation platform produced by Dialogue Technology. It has EISA slots for ease of configuration with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash card, and TFT-LCD card. Say Y if configuring for a Pangolin. Say N otherwise. config SA1100_PLEB bool "PLEB" help Say Y here if you are using a Portable Linux Embedded Board (also known as PLEB). See for more information. config SA1100_PT_SYSTEM3 bool "PT System 3" help Say Y here if you intend to build a kernel suitable to run on a Pruftechnik Digital Board. For more information see config SA1100_SHANNON bool "Shannon" help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, and a telco interface. config SA1100_SHERMAN bool "Sherman" help Say Y here to support the Blazie Engineering `Sherman' StrongARM 1110-based SBC, used primarily in assistance products for the visually impaired. The company is now Freedom Scientific, with a website at . The Sherman product, however, appears to have been discontinued. config SA1100_SIMPAD bool "Simpad" help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same like CL4 in additional it has a PCMCIA-Slot. For more information visit or . config SA1100_PFS168 bool "Tulsa" help The Radisys Corp. PFS-168 (aka Tulsa) is an IntelŪ StrongArmŪ SA-1110 based computer which includes the SA-1111 Microprocessor Companion Chip and other custom I/O designed to add connectivity and multimedia features for vending and business machine applications. Say Y here if you require support for this target. config SA1100_VICTOR bool "Victor" help Say Y here if you are using a Visu Aide Intel(R) StrongARM(R) SA-1100 based Victor Digital Talking Book Reader. See for information on this system. config SA1100_XP860 bool "XP860" help :: Config help missing :: :: 06 August 2002 :: config SA1100_YOPY bool "Yopy" help Say Y here to support the Yopy PDA. Product information at . See Documentation/arm/SA1100/Yopy for more. config SA1100_STORK bool "Stork" help Say Y here if you intend to run this kernel on the Stork handheld computer. #config SA1100_TRIZEPS # bool "Trizeps" # help # :: write me :: #config TRIZEPS_MFTB2 # bool "MFTB2" # depends on SA1100_TRIZEPS # help # :: write me :: config SA1100_SSP tristate "Generic PIO SSP" help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and other devices, eg for BadgePAD 4 sensor support, or Jornada 720 touchscreen support. config SA1100_USB tristate "SA1100 USB function support" config SA1100_USB_NETLINK tristate "Support for SA11x0 USB network link function" depends on SA1100_USB config SA1100_USB_CHAR tristate "Support for SA11x0 USB character device emulation" depends on SA1100_USB config H3600_SLEEVE tristate "Compaq iPAQ Handheld sleeve support" depends on SA1100_H3600 help Choose this option to enable support for extension packs (sleeves) for the Compaq iPAQ H3XXX series of handheld computers. This option is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension packs. endmenu endif