/* * arch/s390/kernel/setup.c * * S390 version * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Hartmut Penner (hp@de.ibm.com), * Martin Schwidefsky (schwidefsky@de.ibm.com) * * Derived from "arch/i386/kernel/setup.c" * Copyright (C) 1995, Linus Torvalds */ /* * This file handles the architecture-dependent parts of initialization */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Machine setup.. */ unsigned int console_mode = 0; unsigned int console_device = -1; unsigned int console_irq = -1; unsigned long memory_size = 0; unsigned long machine_flags = 0; struct { unsigned long addr, size, type; } memory_chunk[16] = { { 0 } }; #define CHUNK_READ_WRITE 0 #define CHUNK_READ_ONLY 1 int cpus_initialized = 0; static cpumask_t cpu_initialized; volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ /* * Setup options */ extern int _text,_etext, _edata, _end; /* * This is set up by the setup-routine at boot-time * for S390 need to find out, what we have to setup * using address 0x10400 ... */ #include static char command_line[COMMAND_LINE_SIZE] = { 0, }; char saved_command_line[COMMAND_LINE_SIZE]; static struct resource code_resource = { "Kernel code", 0x100000, 0 }; static struct resource data_resource = { "Kernel data", 0, 0 }; /* * cpu_init() initializes state that is per-CPU. */ void __devinit cpu_init (void) { int nr = smp_processor_id(); int addr = hard_smp_processor_id(); if (cpu_test_and_set(nr,cpu_initialized)) { printk("CPU#%d ALREADY INITIALIZED!!!!!!!!!\n", nr); for (;;) local_irq_enable(); } cpus_initialized++; /* * Store processor id in lowcore (used e.g. in timer_interrupt) */ asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id)); S390_lowcore.cpu_data.cpu_addr = addr; /* * Force FPU initialization: */ clear_thread_flag(TIF_USEDFPU); current->used_math = 0; /* Setup active_mm for idle_task */ atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; if (current->mm) BUG(); enter_lazy_tlb(&init_mm, current); } /* * VM halt and poweroff setup routines */ char vmhalt_cmd[128] = ""; char vmpoff_cmd[128] = ""; static inline void strncpy_skip_quote(char *dst, char *src, int n) { int sx, dx; dx = 0; for (sx = 0; src[sx] != 0; sx++) { if (src[sx] == '"') continue; dst[dx++] = src[sx]; if (dx >= n) break; } } static int __init vmhalt_setup(char *str) { strncpy_skip_quote(vmhalt_cmd, str, 127); vmhalt_cmd[127] = 0; return 1; } __setup("vmhalt=", vmhalt_setup); static int __init vmpoff_setup(char *str) { strncpy_skip_quote(vmpoff_cmd, str, 127); vmpoff_cmd[127] = 0; return 1; } __setup("vmpoff=", vmpoff_setup); /* * condev= and conmode= setup parameter. */ static int __init condev_setup(char *str) { int vdev; vdev = simple_strtoul(str, &str, 0); if (vdev >= 0 && vdev < 65536) { console_device = vdev; console_irq = -1; } return 1; } __setup("condev=", condev_setup); static int __init conmode_setup(char *str) { #if defined(CONFIG_SCLP_CONSOLE) if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0) SET_CONSOLE_SCLP; #endif #if defined(CONFIG_TN3215_CONSOLE) if (strncmp(str, "3215", 5) == 0) SET_CONSOLE_3215; #endif #if defined(CONFIG_TN3270_CONSOLE) if (strncmp(str, "3270", 5) == 0) SET_CONSOLE_3270; #endif return 1; } __setup("conmode=", conmode_setup); static void __init conmode_default(void) { char query_buffer[1024]; char *ptr; if (MACHINE_IS_VM) { cpcmd("QUERY CONSOLE", query_buffer, 1024); console_device = simple_strtoul(query_buffer + 5, NULL, 16); ptr = strstr(query_buffer, "SUBCHANNEL ="); console_irq = simple_strtoul(ptr + 13, NULL, 16); cpcmd("QUERY TERM", query_buffer, 1024); ptr = strstr(query_buffer, "CONMODE"); /* * Set the conmode to 3215 so that the device recognition * will set the cu_type of the console to 3215. If the * conmode is 3270 and we don't set it back then both * 3215 and the 3270 driver will try to access the console * device (3215 as console and 3270 as normal tty). */ cpcmd("TERM CONMODE 3215", NULL, 0); if (ptr == NULL) { #if defined(CONFIG_SCLP_CONSOLE) SET_CONSOLE_SCLP; #endif return; } if (strncmp(ptr + 8, "3270", 4) == 0) { #if defined(CONFIG_TN3270_CONSOLE) SET_CONSOLE_3270; #elif defined(CONFIG_TN3215_CONSOLE) SET_CONSOLE_3215; #elif defined(CONFIG_SCLP_CONSOLE) SET_CONSOLE_SCLP; #endif } else if (strncmp(ptr + 8, "3215", 4) == 0) { #if defined(CONFIG_TN3215_CONSOLE) SET_CONSOLE_3215; #elif defined(CONFIG_TN3270_CONSOLE) SET_CONSOLE_3270; #elif defined(CONFIG_SCLP_CONSOLE) SET_CONSOLE_SCLP; #endif } } else if (MACHINE_IS_P390) { #if defined(CONFIG_TN3215_CONSOLE) SET_CONSOLE_3215; #elif defined(CONFIG_TN3270_CONSOLE) SET_CONSOLE_3270; #endif } else { #if defined(CONFIG_SCLP_CONSOLE) SET_CONSOLE_SCLP; #endif } } #ifdef CONFIG_SMP extern void machine_restart_smp(char *); extern void machine_halt_smp(void); extern void machine_power_off_smp(void); void (*_machine_restart)(char *command) = machine_restart_smp; void (*_machine_halt)(void) = machine_halt_smp; void (*_machine_power_off)(void) = machine_power_off_smp; #else /* * Reboot, halt and power_off routines for non SMP. */ extern void reipl(unsigned long devno); static void do_machine_restart_nonsmp(char * __unused) { if (MACHINE_IS_VM) cpcmd ("IPL", NULL, 0); else reipl (0x10000 | S390_lowcore.ipl_device); } static void do_machine_halt_nonsmp(void) { if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) cpcmd(vmhalt_cmd, NULL, 0); signal_processor(smp_processor_id(), sigp_stop_and_store_status); } static void do_machine_power_off_nonsmp(void) { if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) cpcmd(vmpoff_cmd, NULL, 0); signal_processor(smp_processor_id(), sigp_stop_and_store_status); } void (*_machine_restart)(char *command) = do_machine_restart_nonsmp; void (*_machine_halt)(void) = do_machine_halt_nonsmp; void (*_machine_power_off)(void) = do_machine_power_off_nonsmp; #endif /* * Reboot, halt and power_off stubs. They just call _machine_restart, * _machine_halt or _machine_power_off. */ void machine_restart(char *command) { console_unblank(); _machine_restart(command); } EXPORT_SYMBOL(machine_restart); void machine_halt(void) { console_unblank(); _machine_halt(); } EXPORT_SYMBOL(machine_halt); void machine_power_off(void) { console_unblank(); _machine_power_off(); } EXPORT_SYMBOL(machine_power_off); /* * Setup function called from init/main.c just after the banner * was printed. */ extern char _pstart, _pend, _stext; void __init setup_arch(char **cmdline_p) { unsigned long bootmap_size; unsigned long memory_start, memory_end; char c = ' ', cn, *to = command_line, *from = COMMAND_LINE; struct resource *res; unsigned long start_pfn, end_pfn; static unsigned int smptrap=0; unsigned long delay = 0; struct _lowcore *lc; int i; if (smptrap) return; smptrap=1; /* * print what head.S has found out about the machine */ #ifndef CONFIG_ARCH_S390X printk((MACHINE_IS_VM) ? "We are running under VM (31 bit mode)\n" : "We are running native (31 bit mode)\n"); printk((MACHINE_HAS_IEEE) ? "This machine has an IEEE fpu\n" : "This machine has no IEEE fpu\n"); #else /* CONFIG_ARCH_S390X */ printk((MACHINE_IS_VM) ? "We are running under VM (64 bit mode)\n" : "We are running native (64 bit mode)\n"); #endif /* CONFIG_ARCH_S390X */ ROOT_DEV = Root_RAM0; memory_start = (unsigned long) &_end; /* fixit if use $CODELO etc*/ #ifndef CONFIG_ARCH_S390X memory_end = memory_size & ~0x400000UL; /* align memory end to 4MB */ /* * We need some free virtual space to be able to do vmalloc. * On a machine with 2GB memory we make sure that we have at * least 128 MB free space for vmalloc. */ if (memory_end > 1920*1024*1024) memory_end = 1920*1024*1024; #else /* CONFIG_ARCH_S390X */ memory_end = memory_size & ~0x200000UL; /* detected in head.s */ #endif /* CONFIG_ARCH_S390X */ init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) &_etext; init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; code_resource.start = (unsigned long) &_text; code_resource.end = (unsigned long) &_etext - 1; data_resource.start = (unsigned long) &_etext; data_resource.end = (unsigned long) &_edata - 1; /* Save unparsed command line copy for /proc/cmdline */ memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; for (;;) { /* * "mem=XXX[kKmM]" sets memsize */ if (c == ' ' && strncmp(from, "mem=", 4) == 0) { memory_end = simple_strtoul(from+4, &from, 0); if ( *from == 'K' || *from == 'k' ) { memory_end = memory_end << 10; from++; } else if ( *from == 'M' || *from == 'm' ) { memory_end = memory_end << 20; from++; } } /* * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes */ if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) { delay = simple_strtoul(from+9, &from, 0); if (*from == 's' || *from == 'S') { delay = delay*1000000; from++; } else if (*from == 'm' || *from == 'M') { delay = delay*60*1000000; from++; } /* now wait for the requested amount of time */ udelay(delay); } cn = *(from++); if (!cn) break; if (cn == '\n') cn = ' '; /* replace newlines with space */ if (cn == 0x0d) cn = ' '; /* replace 0x0d with space */ if (cn == ' ' && c == ' ') continue; /* remove additional spaces */ c = cn; if (to - command_line >= COMMAND_LINE_SIZE) break; *(to++) = c; } if (c == ' ' && to > command_line) to--; *to = '\0'; *cmdline_p = command_line; /* * partially used pages are not usable - thus * we are rounding upwards: */ start_pfn = (__pa(&_end) + PAGE_SIZE - 1) >> PAGE_SHIFT; end_pfn = max_pfn = memory_end >> PAGE_SHIFT; /* * Initialize the boot-time allocator (with low memory only): */ bootmap_size = init_bootmem(start_pfn, end_pfn); /* * Register RAM areas with the bootmem allocator. */ for (i = 0; i < 16 && memory_chunk[i].size > 0; i++) { unsigned long start_chunk, end_chunk; if (memory_chunk[i].type != CHUNK_READ_WRITE) continue; start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1); start_chunk >>= PAGE_SHIFT; end_chunk = (memory_chunk[i].addr + memory_chunk[i].size); end_chunk >>= PAGE_SHIFT; if (start_chunk < start_pfn) start_chunk = start_pfn; if (end_chunk > end_pfn) end_chunk = end_pfn; if (start_chunk < end_chunk) free_bootmem(start_chunk << PAGE_SHIFT, (end_chunk - start_chunk) << PAGE_SHIFT); } /* * Reserve the bootmem bitmap itself as well. We do this in two * steps (first step was init_bootmem()) because this catches * the (very unlikely) case of us accidentally initializing the * bootmem allocator with an invalid RAM area. */ reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size); #ifdef CONFIG_BLK_DEV_INITRD if (INITRD_START) { if (INITRD_START + INITRD_SIZE <= memory_end) { reserve_bootmem(INITRD_START, INITRD_SIZE); initrd_start = INITRD_START; initrd_end = initrd_start + INITRD_SIZE; } else { printk("initrd extends beyond end of memory " "(0x%08lx > 0x%08lx)\ndisabling initrd\n", initrd_start + INITRD_SIZE, memory_end); initrd_start = initrd_end = 0; } } #endif /* * Setup lowcore for boot cpu */ #ifndef CONFIG_ARCH_S390X lc = (struct _lowcore *) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); memset(lc, 0, PAGE_SIZE); #else /* CONFIG_ARCH_S390X */ lc = (struct _lowcore *) __alloc_bootmem(2*PAGE_SIZE, 2*PAGE_SIZE, 0); memset(lc, 0, 2*PAGE_SIZE); #endif /* CONFIG_ARCH_S390X */ lc->restart_psw.mask = PSW_BASE_BITS; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; lc->external_new_psw.mask = PSW_KERNEL_BITS; lc->external_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) ext_int_handler; lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT; lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; lc->program_new_psw.mask = PSW_KERNEL_BITS; lc->program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; lc->mcck_new_psw.mask = PSW_KERNEL_BITS; lc->mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; lc->io_new_psw.mask = PSW_KERNEL_BITS; lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; lc->ipl_device = S390_lowcore.ipl_device; lc->jiffy_timer = -1LL; lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; lc->async_stack = (unsigned long) __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; lc->current_task = (unsigned long) init_thread_union.thread_info.task; lc->thread_info = (unsigned long) &init_thread_union; #ifdef CONFIG_ARCH_S390X if (MACHINE_HAS_DIAG44) lc->diag44_opcode = 0x83000044; else lc->diag44_opcode = 0x07000700; #endif /* CONFIG_ARCH_S390X */ set_prefix((u32)(unsigned long) lc); cpu_init(); __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; /* * Create kernel page tables and switch to virtual addressing. */ paging_init(); res = alloc_bootmem_low(sizeof(struct resource)); res->start = 0; res->end = memory_end; res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); request_resource(res, &code_resource); request_resource(res, &data_resource); /* Setup default console */ conmode_default(); } void print_cpu_info(struct cpuinfo_S390 *cpuinfo) { printk("cpu %d " #ifdef CONFIG_SMP "phys_idx=%d " #endif "vers=%02X ident=%06X machine=%04X unused=%04X\n", cpuinfo->cpu_nr, #ifdef CONFIG_SMP cpuinfo->cpu_addr, #endif cpuinfo->cpu_id.version, cpuinfo->cpu_id.ident, cpuinfo->cpu_id.machine, cpuinfo->cpu_id.unused); } /* * show_cpuinfo - Get information on one CPU for use by procfs. */ static int show_cpuinfo(struct seq_file *m, void *v) { struct cpuinfo_S390 *cpuinfo; unsigned long n = (unsigned long) v - 1; if (!n) { seq_printf(m, "vendor_id : IBM/S390\n" "# processors : %i\n" "bogomips per cpu: %lu.%02lu\n", num_online_cpus(), loops_per_jiffy/(500000/HZ), (loops_per_jiffy/(5000/HZ))%100); } if (cpu_online(n)) { #ifdef CONFIG_SMP if (smp_processor_id() == n) cpuinfo = &S390_lowcore.cpu_data; else cpuinfo = &lowcore_ptr[n]->cpu_data; #else cpuinfo = &S390_lowcore.cpu_data; #endif seq_printf(m, "processor %li: " "version = %02X, " "identification = %06X, " "machine = %04X\n", n, cpuinfo->cpu_id.version, cpuinfo->cpu_id.ident, cpuinfo->cpu_id.machine); } return 0; } static void *c_start(struct seq_file *m, loff_t *pos) { return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL; } static void *c_next(struct seq_file *m, void *v, loff_t *pos) { ++*pos; return c_start(m, pos); } static void c_stop(struct seq_file *m, void *v) { } struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, .show = show_cpuinfo, }; /* * show_interrupts is needed by /proc/interrupts. */ static const char *intrclass_names[] = { "EXT", "I/O", }; int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; if (i == 0) { seq_puts(p, " "); for (j=0; j