//----------------------------------------------------------------------------
//
//  Copyright (C) Intel Corporation, 2004 - 2007
//
//  File:       StatusCodeDefinitions.h
//
//  Notes:      This file contains the definitions of the status codes 
//              as defined in the Intel® AMT Network Design Guide.
//
//----------------------------------------------------------------------------

#ifndef STATUS_CODE_DEFINITIONS_H
#define STATUS_CODE_DEFINITIONS_H

typedef unsigned int PT_STATUS;
typedef unsigned int AMT_STATUS;

//Request succeeded
#define PT_STATUS_SUCCESS  0x0 
#define AMT_STATUS_SUCCESS  0x0 

//An internal error in the Intel® AMT device has occurred
#define PT_STATUS_INTERNAL_ERROR  0x1 
#define AMT_STATUS_INTERNAL_ERROR  0x1 

//Intel® AMT device has not progressed far enough in its 
//initialization to process the command.
#define PT_STATUS_NOT_READY  0x2 
#define AMT_STATUS_NOT_READY  0x2 

//Command is not permitted in current operating mode.
#define PT_STATUS_INVALID_PT_MODE  0x3 
#define AMT_STATUS_INVALID_PT_MODE  0x3 

//Length field of header is invalid.
#define PT_STATUS_INVALID_MESSAGE_LENGTH  0x4 
#define AMT_STATUS_INVALID_MESSAGE_LENGTH  0x4 

//The requested hardware asset inventory table 
//checksum is not available. 
#define PT_STATUS_TABLE_FINGERPRINT_NOT_AVAILABLE  0x5 
#define AMT_STATUS_TABLE_FINGERPRINT_NOT_AVAILABLE  0x5 

//The Integrity Check Value field of the request 
//message sent by Intel® AMT enabled device is invalid.
#define PT_STATUS_INTEGRITY_CHECK_FAILED  0x6
#define AMT_STATUS_INTEGRITY_CHECK_FAILED  0x6

//The specified ISV version is not supported
#define PT_STATUS_UNSUPPORTED_ISVS_VERSION  0x7 
#define AMT_STATUS_UNSUPPORTED_ISVS_VERSION  0x7 

//The specified queried application is not registered.
#define PT_STATUS_APPLICATION_NOT_REGISTERED  0x8
#define AMT_STATUS_APPLICATION_NOT_REGISTERED  0x8

//Either an invalid name or a not previously registered 
//“Enterprise” name was specified 
#define PT_STATUS_INVALID_REGISTRATION_DATA  0x9 
#define AMT_STATUS_INVALID_REGISTRATION_DATA  0x9 

//The application handle provided in the request 
//message has never been allocated.
#define PT_STATUS_APPLICATION_DOES_NOT_EXIST  0xA 
#define AMT_STATUS_APPLICATION_DOES_NOT_EXIST  0xA 

//The requested number of bytes cannot be allocated in ISV storage.
#define PT_STATUS_NOT_ENOUGH_STORAGE  0xB
#define AMT_STATUS_NOT_ENOUGH_STORAGE  0xB

//The specified name is invalid.
#define PT_STATUS_INVALID_NAME  0xC 
#define AMT_STATUS_INVALID_NAME  0xC 

//The specified block does not exist.
#define PT_STATUS_BLOCK_DOES_NOT_EXIST  0xD 
#define AMT_STATUS_BLOCK_DOES_NOT_EXIST  0xD 

//The specified byte offset is invalid.
#define PT_STATUS_INVALID_BYTE_OFFSET  0xE 
#define AMT_STATUS_INVALID_BYTE_OFFSET  0xE 

//The specified byte count is invalid.
#define PT_STATUS_INVALID_BYTE_COUNT  0xF
#define AMT_STATUS_INVALID_BYTE_COUNT  0xF

//The requesting application is not 
//permitted to request execution of the specified operation.
#define PT_STATUS_NOT_PERMITTED  0x10
#define AMT_STATUS_NOT_PERMITTED  0x10

//The requesting application is not the owner of the block 
//as required for the requested operation.
#define PT_STATUS_NOT_OWNER  0x11 
#define AMT_STATUS_NOT_OWNER  0x11 

//The specified block is locked by another application.
#define PT_STATUS_BLOCK_LOCKED_BY_OTHER  0x12 
#define AMT_STATUS_BLOCK_LOCKED_BY_OTHER  0x12 

//The specified block is not locked.
#define PT_STATUS_BLOCK_NOT_LOCKED  0x13 
#define AMT_STATUS_BLOCK_NOT_LOCKED  0x13 

//The specified group permission bits are invalid.
#define PT_STATUS_INVALID_GROUP_PERMISSIONS  0x14
#define AMT_STATUS_INVALID_GROUP_PERMISSIONS  0x14

//The specified group does not exist.
#define PT_STATUS_GROUP_DOES_NOT_EXIST  0x15 
#define AMT_STATUS_GROUP_DOES_NOT_EXIST  0x15 

//The specified member count is invalid.
#define PT_STATUS_INVALID_MEMBER_COUNT  0x16 
#define AMT_STATUS_INVALID_MEMBER_COUNT  0x16 

//The request cannot be satisfied because a maximum
//limit associated with the request has been reached.
#define PT_STATUS_MAX_LIMIT_REACHED  0x17 
#define AMT_STATUS_MAX_LIMIT_REACHED  0x17 

//specified key algorithm is invalid.
#define PT_STATUS_INVALID_AUTH_TYPE  0x18 
#define AMT_STATUS_INVALID_AUTH_TYPE  0x18 

//Not Used
#define PT_STATUS_AUTHENTICATION_FAILED  0x19
#define AMT_STATUS_AUTHENTICATION_FAILED  0x19

//The specified DHCP mode is invalid.
#define PT_STATUS_INVALID_DHCP_MODE  0x1A 
#define AMT_STATUS_INVALID_DHCP_MODE  0x1A 

//The specified IP address is not a valid IP unicast address.
#define PT_STATUS_INVALID_IP_ADDRESS  0x1B 
#define AMT_STATUS_INVALID_IP_ADDRESS  0x1B 

//The specified domain name is not a valid domain name.
#define PT_STATUS_INVALID_DOMAIN_NAME  0x1C 
#define AMT_STATUS_INVALID_DOMAIN_NAME  0x1C 

//Not Used 
#define PT_STATUS_UNSUPPORTED_VERSION  0x1D
#define AMT_STATUS_UNSUPPORTED_VERSION  0x1D

//The requested operation cannot be performed because a 
//prerequisite request message has not been received.
#define PT_STATUS_REQUEST_UNEXPECTED  0x1E 
#define AMT_STATUS_REQUEST_UNEXPECTED  0x1E 

//Not Used
#define PT_STATUS_INVALID_TABLE_TYPE  0x1F 
#define AMT_STATUS_INVALID_TABLE_TYPE  0x1F 

//The specified provisioning mode code is undefined.
#define PT_STATUS_INVALID_PROVISIONING_STATE  0x20 
#define AMT_STATUS_INVALID_PROVISIONING_STATE  0x20 

//Not Used
#define PT_STATUS_UNSUPPORTED_OBJECT  0x21 
#define AMT_STATUS_UNSUPPORTED_OBJECT  0x21 

//The specified time was not accepted by the Intel® AMT device
//since it is earlier than the baseline time set for the device.
#define PT_STATUS_INVALID_TIME  0x22 
#define AMT_STATUS_INVALID_TIME  0x22 

//StartingIndex is invalid.
#define PT_STATUS_INVALID_INDEX  0x23 
#define AMT_STATUS_INVALID_INDEX  0x23 

//A parameter is invalid.
#define PT_STATUS_INVALID_PARAMETER  0x24 
#define AMT_STATUS_INVALID_PARAMETER  0x24 

//An invalid netmask was supplied 
//(a valid netmask is an IP address in which all ‘1’s are before 
//the ‘0’ – e.g. FFFC0000h is valid, FF0C0000h is invalid).
#define PT_STATUS_INVALID_NETMASK  0x25 
#define AMT_STATUS_INVALID_NETMASK  0x25 

//The operation failed because the Flash wear-out 
//protection mechanism prevented a write to an NVRAM sector.
#define PT_STATUS_FLASH_WRITE_LIMIT_EXCEEDED  0x26 
#define AMT_STATUS_FLASH_WRITE_LIMIT_EXCEEDED  0x26 

//ME FW did not receive the entire image file.
#define PT_STATUS_INVALID_IMAGE_LENGTH  0x27
#define AMT_STATUS_INVALID_IMAGE_LENGTH  0x27

//ME FW received an image file with an invalid signature.
#define PT_STATUS_INVALID_IMAGE_SIGNATURE  0x28
#define AMT_STATUS_INVALID_IMAGE_SIGNATURE  0x28

//LME can not support the requested version.
#define	PT_STATUS_PROPOSE_ANOTHER_VERSION  0x29
#define	AMT_STATUS_PROPOSE_ANOTHER_VERSION  0x29

//The PID must be a 64 bit quantity made up of ASCII codes
//of some combination of 8 characters – 
//capital alphabets (A–Z), and numbers (0–9). 
#define	PT_STATUS_INVALID_PID_FORMAT  0x2A
#define	AMT_STATUS_INVALID_PID_FORMAT  0x2A

//The PPS must be a 256 bit quantity made up of ASCII codes 
//of some combination of 32 characters – 
//capital alphabets (A–Z), and numbers (0–9). 
#define	PT_STATUS_INVALID_PPS_FORMAT  0x2B
#define	AMT_STATUS_INVALID_PPS_FORMAT  0x2B

//Full BIST test has been blocked
#define PT_STATUS_BIST_COMMAND_BLOCKED  0x2C
#define AMT_STATUS_BIST_COMMAND_BLOCKED  0x2C

//A TCP/IP connection could not be opened on with the selected port.
#define PT_STATUS_CONNECTION_FAILED	 0x2D
#define AMT_STATUS_CONNECTION_FAILED	 0x2D

//Max number of connection reached. 
//LME can not open the requested connection.
#define PT_STATUS_CONNECTION_TOO_MANY  0x2E
#define AMT_STATUS_CONNECTION_TOO_MANY  0x2E

//Random key generation is in progress.
#define PT_STATUS_RNG_GENERATION_IN_PROGRESS  0x2F
#define AMT_STATUS_RNG_GENERATION_IN_PROGRESS  0x2F

//A randomly generated key does not exist.
#define PT_STATUS_RNG_NOT_READY  0x30
#define AMT_STATUS_RNG_NOT_READY  0x30

//Self-generated AMT certificate does not exist.
#define PT_STATUS_CERTIFICATE_NOT_READY  0x31
#define AMT_STATUS_CERTIFICATE_NOT_READY  0x31

//This code establishes a dividing line between
//status codes which are common to host interface and 
//network interface and status codes which are used by 
//network interface only.
#define PT_STATUS_NETWORK_IF_ERROR_BASE  0x800
#define AMT_STATUS_NETWORK_IF_ERROR_BASE  0x800

//The OEM number specified in the remote control 
//command is not supported by the Intel® AMT device
#define PT_STATUS_UNSUPPORTED_OEM_NUMBER  0x801
#define AMT_STATUS_UNSUPPORTED_OEM_NUMBER  0x801

//The boot option specified in the remote control command
//is not supported by the Intel® AMT device
#define PT_STATUS_UNSUPPORTED_BOOT_OPTION  0x802
#define AMT_STATUS_UNSUPPORTED_BOOT_OPTION  0x802

//The command specified in the remote control command 
//is not supported by the Intel® AMT device
#define PT_STATUS_INVALID_COMMAND  0x803 
#define AMT_STATUS_INVALID_COMMAND  0x803 

//The special command specified in the remote control command 
//is not supported by the Intel® AMT device
#define PT_STATUS_INVALID_SPECIAL_COMMAND  0x804 
#define AMT_STATUS_INVALID_SPECIAL_COMMAND  0x804 

//The handle specified in the command is invalid
#define PT_STATUS_INVALID_HANDLE  0x805 
#define AMT_STATUS_INVALID_HANDLE  0x805 

//The password specified in the User ACL is invalid
#define PT_STATUS_INVALID_PASSWORD  0x806
#define AMT_STATUS_INVALID_PASSWORD  0x806

//The realm specified in the User ACL is invalid
#define PT_STATUS_INVALID_REALM  0x807 
#define AMT_STATUS_INVALID_REALM  0x807 

//The FPACL or EACL entry is used by an active 
//registration and cannot be removed or modified.
#define PT_STATUS_STORAGE_ACL_ENTRY_IN_USE  0x808 
#define AMT_STATUS_STORAGE_ACL_ENTRY_IN_USE  0x808 

//Essential data is missing on CommitChanges command.
#define PT_STATUS_DATA_MISSING  0x809
#define AMT_STATUS_DATA_MISSING  0x809

//The parameter specified is a duplicate of an existing value.
//Returned for a case where duplicate entries are added to FPACL 
//(Factory Partner Allocation Control List) or EACL 
//(Enterprise Access Control List) lists.
#define PT_STATUS_DUPLICATE  0x80A 
#define AMT_STATUS_DUPLICATE  0x80A 

//Event Log operation failed due to the current freeze status of the log.
#define PT_STATUS_EVENTLOG_FROZEN  0x80B 
#define AMT_STATUS_EVENTLOG_FROZEN  0x80B 

//The device is missing private key material.
#define PT_STATUS_PKI_MISSING_KEYS  0x80C
#define AMT_STATUS_PKI_MISSING_KEYS  0x80C

//The device is currently generating a keypair. 
//Caller may try repeating this operation at a later time.
#define PT_STATUS_PKI_GENERATING_KEYS  0x80D
#define AMT_STATUS_PKI_GENERATING_KEYS  0x80D

//An invalid Key was entered.
#define PT_STATUS_INVALID_KEY  0x80E
#define AMT_STATUS_INVALID_KEY  0x80E

//An invalid X.509 certificate was entered.
#define PT_STATUS_INVALID_CERT  0x80F
#define AMT_STATUS_INVALID_CERT  0x80F

//Certificate Chain and Private Key do not match.
#define PT_STATUS_CERT_KEY_NOT_MATCH  0x810
#define AMT_STATUS_CERT_KEY_NOT_MATCH  0x810

//The request cannot be satisfied because the maximum
//number of allowed Kerberos domains has been reached.
//(The domain is determined by the first 24 Bytes of the SID.)
#define PT_STATUS_MAX_KERB_DOMAIN_REACHED 0x811
#define AMT_STATUS_MAX_KERB_DOMAIN_REACHED 0x811

// The requested configuration is unsupported
#define PT_STATUS_UNSUPPORTED 0x812
#define AMT_STATUS_UNSUPPORTED 0x812

// A profile with the requested priority already exists
#define PT_STATUS_INVALID_PRIORITY 0x813
#define AMT_STATUS_INVALID_PRIORITY 0x813

// Unable to find specified element
#define PT_STATUS_NOT_FOUND 0x814
#define AMT_STATUS_NOT_FOUND 0x814

// Invalid User credentials 
#define PT_STATUS_INVALID_CREDENTIALS 0x815
#define AMT_STATUS_INVALID_CREDENTIALS 0x815

// Passphrase is invalid
#define PT_STATUS_INVALID_PASSPHRASE 0x816
#define AMT_STATUS_INVALID_PASSPHRASE 0x816

// A certificate handle must be chosen before the
// operation can be completed.
#define PT_STATUS_NO_ASSOCIATION 0x818
#define AMT_STATUS_NO_ASSOCIATION 0x818

//The application has identified an internal error
#define PTSDK_STATUS_INTERNAL_ERROR  0x1000

//An ISV operation was called while the library is not
//initialized
#define PTSDK_STATUS_NOT_INITIALIZED  0x1001

//The requested library I/F is not supported by the current library
//implementation.
#define PTSDK_STATUS_LIB_VERSION_UNSUPPORTED  0x1002

//One of the parameters is invalid (usually indicates a
//NULL pointer or an invalid session handle is specified)
#define PTSDK_STATUS_INVALID_PARAM  0x1003

//The SDK could not allocate sufficient resources to complete the operation.
#define PTSDK_STATUS_RESOURCES  0x1004

//The Library has identified a HW Internal error.
#define PTSDK_STATUS_HARDWARE_ACCESS_ERROR  0x1005

//The application that sent the request message is not registered. 
//Usually indicates the registration timeout has elapsed. 
//The caller should reregister with the Intel AMT enabled device.
#define PTSDK_STATUS_REQUESTOR_NOT_REGISTERED  0x1006

//A network error has occurred while processing the call.
#define PTSDK_STATUS_NETWORK_ERROR  0x1007

//Specified container can not hold the requested string
#define PTSDK_STATUS_PARAM_BUFFER_TOO_SHORT  0x1008

//For Windows only.
//ISVS_InitializeCOMinThread was not called by the current thread.
#define PTSDK_STATUS_COM_NOT_INITIALIZED_IN_THREAD  0x1009

//The URL parameter was not optional in current configuration.
#define PTSDK_STATUS_URL_REQUIRED	 0x100A

#endif