/****************************************************************************** * * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes * *****************************************************************************/ /* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exmisc") /******************************************************************************* * * FUNCTION: acpi_ex_get_object_reference * * PARAMETERS: obj_desc - Create a reference to this object * return_desc - Where to store the reference * walk_state - Current state * * RETURN: Status * * DESCRIPTION: Obtain and return a "reference" to the target object * Common code for the ref_of_op and the cond_ref_of_op. * ******************************************************************************/ acpi_status acpi_ex_get_object_reference ( union acpi_operand_object *obj_desc, union acpi_operand_object **return_desc, struct acpi_walk_state *walk_state) { union acpi_operand_object *reference_obj; union acpi_operand_object *referenced_obj; ACPI_FUNCTION_TRACE_PTR ("ex_get_object_reference", obj_desc); *return_desc = NULL; switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc)) { case ACPI_DESC_TYPE_OPERAND: if (ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_LOCAL_REFERENCE) { return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* * Must be a reference to a Local or Arg */ switch (obj_desc->reference.opcode) { case AML_LOCAL_OP: case AML_ARG_OP: /* The referenced object is the pseudo-node for the local/arg */ referenced_obj = obj_desc->reference.object; break; default: ACPI_REPORT_ERROR (("Unknown Reference subtype in get ref %X\n", obj_desc->reference.opcode)); return_ACPI_STATUS (AE_AML_INTERNAL); } break; case ACPI_DESC_TYPE_NAMED: /* * A named reference that has already been resolved to a Node */ referenced_obj = obj_desc; break; default: ACPI_REPORT_ERROR (("Invalid descriptor type in get ref: %X\n", ACPI_GET_DESCRIPTOR_TYPE (obj_desc))); return_ACPI_STATUS (AE_TYPE); } /* Create a new reference object */ reference_obj = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE); if (!reference_obj) { return_ACPI_STATUS (AE_NO_MEMORY); } reference_obj->reference.opcode = AML_REF_OF_OP; reference_obj->reference.object = referenced_obj; *return_desc = reference_obj; ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Object %p Type [%s], returning Reference %p\n", obj_desc, acpi_ut_get_object_type_name (obj_desc), *return_desc)); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ex_concat_template * * PARAMETERS: Operand0 - First source object * Operand1 - Second source object * actual_return_desc - Where to place the return object * walk_state - Current walk state * * RETURN: Status * * DESCRIPTION: Concatenate two resource templates * ******************************************************************************/ acpi_status acpi_ex_concat_template ( union acpi_operand_object *operand0, union acpi_operand_object *operand1, union acpi_operand_object **actual_return_desc, struct acpi_walk_state *walk_state) { union acpi_operand_object *return_desc; u8 *new_buf; u8 *end_tag1; u8 *end_tag2; acpi_size length1; acpi_size length2; ACPI_FUNCTION_TRACE ("ex_concat_template"); /* Find the end_tags in each resource template */ end_tag1 = acpi_ut_get_resource_end_tag (operand0); end_tag2 = acpi_ut_get_resource_end_tag (operand1); if (!end_tag1 || !end_tag2) { return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* Compute the length of each part */ length1 = ACPI_PTR_DIFF (end_tag1, operand0->buffer.pointer); length2 = ACPI_PTR_DIFF (end_tag2, operand1->buffer.pointer) + 2; /* Size of END_TAG */ /* Create a new buffer object for the result */ return_desc = acpi_ut_create_buffer_object (length1 + length2); if (!return_desc) { return_ACPI_STATUS (AE_NO_MEMORY); } /* Copy the templates to the new descriptor */ new_buf = return_desc->buffer.pointer; ACPI_MEMCPY (new_buf, operand0->buffer.pointer, length1); ACPI_MEMCPY (new_buf + length1, operand1->buffer.pointer, length2); /* Compute the new checksum */ new_buf[return_desc->buffer.length - 1] = acpi_ut_generate_checksum (return_desc->buffer.pointer, (return_desc->buffer.length - 1)); /* Return the completed template descriptor */ *actual_return_desc = return_desc; return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ex_do_concatenate * * PARAMETERS: Operand0 - First source object * Operand1 - Second source object * actual_return_desc - Where to place the return object * walk_state - Current walk state * * RETURN: Status * * DESCRIPTION: Concatenate two objects OF THE SAME TYPE. * ******************************************************************************/ acpi_status acpi_ex_do_concatenate ( union acpi_operand_object *operand0, union acpi_operand_object *operand1, union acpi_operand_object **actual_return_desc, struct acpi_walk_state *walk_state) { union acpi_operand_object *local_operand1 = operand1; union acpi_operand_object *return_desc; char *new_buf; acpi_status status; acpi_size new_length; ACPI_FUNCTION_TRACE ("ex_do_concatenate"); /* * Convert the second operand if necessary. The first operand * determines the type of the second operand, (See the Data Types * section of the ACPI specification.) Both object types are * guaranteed to be either Integer/String/Buffer by the operand * resolution mechanism. */ switch (ACPI_GET_OBJECT_TYPE (operand0)) { case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer (operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: status = acpi_ex_convert_to_string (operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: status = acpi_ex_convert_to_buffer (operand1, &local_operand1); break; default: ACPI_REPORT_ERROR (("Concat - invalid obj type: %X\n", ACPI_GET_OBJECT_TYPE (operand0))); status = AE_AML_INTERNAL; } if (ACPI_FAILURE (status)) { goto cleanup; } /* * Both operands are now known to be the same object type * (Both are Integer, String, or Buffer), and we can now perform the * concatenation. */ /* * There are three cases to handle: * * 1) Two Integers concatenated to produce a new Buffer * 2) Two Strings concatenated to produce a new String * 3) Two Buffers concatenated to produce a new Buffer */ switch (ACPI_GET_OBJECT_TYPE (operand0)) { case ACPI_TYPE_INTEGER: /* Result of two Integers is a Buffer */ /* Need enough buffer space for two integers */ return_desc = acpi_ut_create_buffer_object ( ACPI_MUL_2 (acpi_gbl_integer_byte_width)); if (!return_desc) { status = AE_NO_MEMORY; goto cleanup; } new_buf = (char *) return_desc->buffer.pointer; /* Copy the first integer, LSB first */ ACPI_MEMCPY (new_buf, &operand0->integer.value, acpi_gbl_integer_byte_width); /* Copy the second integer (LSB first) after the first */ ACPI_MEMCPY (new_buf + acpi_gbl_integer_byte_width, &local_operand1->integer.value, acpi_gbl_integer_byte_width); break; case ACPI_TYPE_STRING: /* Result of two Strings is a String */ new_length = (acpi_size) operand0->string.length + (acpi_size) local_operand1->string.length; if (new_length > ACPI_MAX_STRING_CONVERSION) { status = AE_AML_STRING_LIMIT; goto cleanup; } return_desc = acpi_ut_create_string_object (new_length); if (!return_desc) { status = AE_NO_MEMORY; goto cleanup; } new_buf = return_desc->string.pointer; /* Concatenate the strings */ ACPI_STRCPY (new_buf, operand0->string.pointer); ACPI_STRCPY (new_buf + operand0->string.length, local_operand1->string.pointer); break; case ACPI_TYPE_BUFFER: /* Result of two Buffers is a Buffer */ return_desc = acpi_ut_create_buffer_object ( (acpi_size) operand0->buffer.length + (acpi_size) local_operand1->buffer.length); if (!return_desc) { status = AE_NO_MEMORY; goto cleanup; } new_buf = (char *) return_desc->buffer.pointer; /* Concatenate the buffers */ ACPI_MEMCPY (new_buf, operand0->buffer.pointer, operand0->buffer.length); ACPI_MEMCPY (new_buf + operand0->buffer.length, local_operand1->buffer.pointer, local_operand1->buffer.length); break; default: /* Invalid object type, should not happen here */ ACPI_REPORT_ERROR (("Concatenate - Invalid object type: %X\n", ACPI_GET_OBJECT_TYPE (operand0))); status =AE_AML_INTERNAL; goto cleanup; } *actual_return_desc = return_desc; cleanup: if (local_operand1 != operand1) { acpi_ut_remove_reference (local_operand1); } return_ACPI_STATUS (status); } /******************************************************************************* * * FUNCTION: acpi_ex_do_math_op * * PARAMETERS: Opcode - AML opcode * Integer0 - Integer operand #0 * Integer1 - Integer operand #1 * * RETURN: Integer result of the operation * * DESCRIPTION: Execute a math AML opcode. The purpose of having all of the * math functions here is to prevent a lot of pointer dereferencing * to obtain the operands. * ******************************************************************************/ acpi_integer acpi_ex_do_math_op ( u16 opcode, acpi_integer integer0, acpi_integer integer1) { ACPI_FUNCTION_ENTRY (); switch (opcode) { case AML_ADD_OP: /* Add (Integer0, Integer1, Result) */ return (integer0 + integer1); case AML_BIT_AND_OP: /* And (Integer0, Integer1, Result) */ return (integer0 & integer1); case AML_BIT_NAND_OP: /* NAnd (Integer0, Integer1, Result) */ return (~(integer0 & integer1)); case AML_BIT_OR_OP: /* Or (Integer0, Integer1, Result) */ return (integer0 | integer1); case AML_BIT_NOR_OP: /* NOr (Integer0, Integer1, Result) */ return (~(integer0 | integer1)); case AML_BIT_XOR_OP: /* XOr (Integer0, Integer1, Result) */ return (integer0 ^ integer1); case AML_MULTIPLY_OP: /* Multiply (Integer0, Integer1, Result) */ return (integer0 * integer1); case AML_SHIFT_LEFT_OP: /* shift_left (Operand, shift_count, Result) */ return (integer0 << integer1); case AML_SHIFT_RIGHT_OP: /* shift_right (Operand, shift_count, Result) */ return (integer0 >> integer1); case AML_SUBTRACT_OP: /* Subtract (Integer0, Integer1, Result) */ return (integer0 - integer1); default: return (0); } } /******************************************************************************* * * FUNCTION: acpi_ex_do_logical_numeric_op * * PARAMETERS: Opcode - AML opcode * Integer0 - Integer operand #0 * Integer1 - Integer operand #1 * logical_result - TRUE/FALSE result of the operation * * RETURN: Status * * DESCRIPTION: Execute a logical "Numeric" AML opcode. For these Numeric * operators (LAnd and LOr), both operands must be integers. * * Note: cleanest machine code seems to be produced by the code * below, rather than using statements of the form: * Result = (Integer0 && Integer1); * ******************************************************************************/ acpi_status acpi_ex_do_logical_numeric_op ( u16 opcode, acpi_integer integer0, acpi_integer integer1, u8 *logical_result) { acpi_status status = AE_OK; u8 local_result = FALSE; ACPI_FUNCTION_TRACE ("ex_do_logical_numeric_op"); switch (opcode) { case AML_LAND_OP: /* LAnd (Integer0, Integer1) */ if (integer0 && integer1) { local_result = TRUE; } break; case AML_LOR_OP: /* LOr (Integer0, Integer1) */ if (integer0 || integer1) { local_result = TRUE; } break; default: status = AE_AML_INTERNAL; break; } /* Return the logical result and status */ *logical_result = local_result; return_ACPI_STATUS (status); } /******************************************************************************* * * FUNCTION: acpi_ex_do_logical_op * * PARAMETERS: Opcode - AML opcode * Operand0 - operand #0 * Operand1 - operand #1 * logical_result - TRUE/FALSE result of the operation * * RETURN: Status * * DESCRIPTION: Execute a logical AML opcode. The purpose of having all of the * functions here is to prevent a lot of pointer dereferencing * to obtain the operands and to simplify the generation of the * logical value. For the Numeric operators (LAnd and LOr), both * operands must be integers. For the other logical operators, * operands can be any combination of Integer/String/Buffer. The * first operand determines the type to which the second operand * will be converted. * * Note: cleanest machine code seems to be produced by the code * below, rather than using statements of the form: * Result = (Operand0 == Operand1); * ******************************************************************************/ acpi_status acpi_ex_do_logical_op ( u16 opcode, union acpi_operand_object *operand0, union acpi_operand_object *operand1, u8 *logical_result) { union acpi_operand_object *local_operand1 = operand1; acpi_integer integer0; acpi_integer integer1; u32 length0; u32 length1; acpi_status status = AE_OK; u8 local_result = FALSE; int compare; ACPI_FUNCTION_TRACE ("ex_do_logical_op"); /* * Convert the second operand if necessary. The first operand * determines the type of the second operand, (See the Data Types * section of the ACPI 3.0+ specification.) Both object types are * guaranteed to be either Integer/String/Buffer by the operand * resolution mechanism. */ switch (ACPI_GET_OBJECT_TYPE (operand0)) { case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer (operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: status = acpi_ex_convert_to_string (operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: status = acpi_ex_convert_to_buffer (operand1, &local_operand1); break; default: status = AE_AML_INTERNAL; break; } if (ACPI_FAILURE (status)) { goto cleanup; } /* * Two cases: 1) Both Integers, 2) Both Strings or Buffers */ if (ACPI_GET_OBJECT_TYPE (operand0) == ACPI_TYPE_INTEGER) { /* * 1) Both operands are of type integer * Note: local_operand1 may have changed above */ integer0 = operand0->integer.value; integer1 = local_operand1->integer.value; switch (opcode) { case AML_LEQUAL_OP: /* LEqual (Operand0, Operand1) */ if (integer0 == integer1) { local_result = TRUE; } break; case AML_LGREATER_OP: /* LGreater (Operand0, Operand1) */ if (integer0 > integer1) { local_result = TRUE; } break; case AML_LLESS_OP: /* LLess (Operand0, Operand1) */ if (integer0 < integer1) { local_result = TRUE; } break; default: status = AE_AML_INTERNAL; break; } } else { /* * 2) Both operands are Strings or both are Buffers * Note: Code below takes advantage of common Buffer/String * object fields. local_operand1 may have changed above. Use * memcmp to handle nulls in buffers. */ length0 = operand0->buffer.length; length1 = local_operand1->buffer.length; /* Lexicographic compare: compare the data bytes */ compare = ACPI_MEMCMP ((const char * ) operand0->buffer.pointer, (const char * ) local_operand1->buffer.pointer, (length0 > length1) ? length1 : length0); switch (opcode) { case AML_LEQUAL_OP: /* LEqual (Operand0, Operand1) */ /* Length and all bytes must be equal */ if ((length0 == length1) && (compare == 0)) { /* Length and all bytes match ==> TRUE */ local_result = TRUE; } break; case AML_LGREATER_OP: /* LGreater (Operand0, Operand1) */ if (compare > 0) { local_result = TRUE; goto cleanup; /* TRUE */ } if (compare < 0) { goto cleanup; /* FALSE */ } /* Bytes match (to shortest length), compare lengths */ if (length0 > length1) { local_result = TRUE; } break; case AML_LLESS_OP: /* LLess (Operand0, Operand1) */ if (compare > 0) { goto cleanup; /* FALSE */ } if (compare < 0) { local_result = TRUE; goto cleanup; /* TRUE */ } /* Bytes match (to shortest length), compare lengths */ if (length0 < length1) { local_result = TRUE; } break; default: status = AE_AML_INTERNAL; break; } } cleanup: /* New object was created if implicit conversion performed - delete */ if (local_operand1 != operand1) { acpi_ut_remove_reference (local_operand1); } /* Return the logical result and status */ *logical_result = local_result; return_ACPI_STATUS (status); }