/* it87.c - Part of lm_sensors, Linux kernel modules for hardware monitoring. Supports: IT8705F Super I/O chip w/LPC interface IT8712F Super I/O chip w/LPC interface & SMbus Sis950 A clone of the IT8705F Copyright (C) 2001 Chris Gauthron Largely inspired by lm78.c of the same package This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* djg@pdp8.net David Gesswein 7/18/01 Modified to fix bug with not all alarms enabled. Added ability to read battery voltage and select temperature sensor type at module load time. */ #include #include #include #include #include #include #include /* Addresses to scan */ static unsigned short normal_i2c[] = { I2C_CLIENT_END }; static unsigned short normal_i2c_range[] = { 0x20, 0x2f, I2C_CLIENT_END }; static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END }; /* Insmod parameters */ SENSORS_INSMOD_1(it87); /* Update battery voltage after every reading if true */ static int update_vbat; /* Reset the registers on init if true */ static int reset; /* Many IT87 constants specified below */ /* Length of ISA address segment */ #define IT87_EXTENT 8 /* Where are the ISA address/data registers relative to the base address */ #define IT87_ADDR_REG_OFFSET 5 #define IT87_DATA_REG_OFFSET 6 /*----- The IT87 registers -----*/ #define IT87_REG_CONFIG 0x00 #define IT87_REG_ALARM1 0x01 #define IT87_REG_ALARM2 0x02 #define IT87_REG_ALARM3 0x03 #define IT87_REG_VID 0x0a #define IT87_REG_FAN_DIV 0x0b /* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ #define IT87_REG_FAN(nr) (0x0d + (nr)) #define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) #define IT87_REG_FAN_CTRL 0x13 #define IT87_REG_VIN(nr) (0x20 + (nr)) #define IT87_REG_TEMP(nr) (0x29 + (nr)) #define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2) #define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2) #define IT87_REG_TEMP_HIGH(nr) (0x40 + ((nr) * 2)) #define IT87_REG_TEMP_LOW(nr) (0x41 + ((nr) * 2)) #define IT87_REG_I2C_ADDR 0x48 #define IT87_REG_VIN_ENABLE 0x50 #define IT87_REG_TEMP_ENABLE 0x51 #define IT87_REG_CHIPID 0x58 #define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255)) #define IN_FROM_REG(val) (((val) * 16) / 10) static inline u8 FAN_TO_REG(long rpm, int div) { if (rpm == 0) return 255; rpm = SENSORS_LIMIT(rpm, 1, 1000000); return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-5)/10):\ ((val)+5)/10),0,255)) #define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*10) #define VID_FROM_REG(val) ((val)==0x1f?0:(val)>=0x10?510-(val)*10:\ 205-(val)*5) #define ALARMS_FROM_REG(val) (val) static int DIV_TO_REG(int val) { int answer = 0; while ((val >>= 1)) answer++; return answer; } #define DIV_FROM_REG(val) (1 << (val)) /* For each registered IT87, we need to keep some data in memory. That data is pointed to by it87_list[NR]->data. The structure itself is dynamically allocated, at the same time when a new it87 client is allocated. */ struct it87_data { struct i2c_client client; struct semaphore lock; enum chips type; struct semaphore update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[9]; /* Register value */ u8 in_max[9]; /* Register value */ u8 in_min[9]; /* Register value */ u8 fan[3]; /* Register value */ u8 fan_min[3]; /* Register value */ u8 temp[3]; /* Register value */ u8 temp_high[3]; /* Register value */ u8 temp_low[3]; /* Register value */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ u32 alarms; /* Register encoding, combined */ }; static int it87_attach_adapter(struct i2c_adapter *adapter); static int it87_detect(struct i2c_adapter *adapter, int address, int kind); static int it87_detach_client(struct i2c_client *client); static int it87_read_value(struct i2c_client *client, u8 register); static int it87_write_value(struct i2c_client *client, u8 register, u8 value); static struct it87_data *it87_update_device(struct device *dev); static void it87_init_client(struct i2c_client *client, struct it87_data *data); static struct i2c_driver it87_driver = { .owner = THIS_MODULE, .name = "it87", .id = I2C_DRIVERID_IT87, .flags = I2C_DF_NOTIFY, .attach_adapter = it87_attach_adapter, .detach_client = it87_detach_client, }; static int it87_id = 0; static ssize_t show_in(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])*10 ); } static ssize_t show_in_min(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])*10 ); } static ssize_t show_in_max(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])*10 ); } static ssize_t set_in_min(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10)/10; data->in_min[nr] = IN_TO_REG(val); it87_write_value(client, IT87_REG_VIN_MIN(nr), data->in_min[nr]); return count; } static ssize_t set_in_max(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10)/10; data->in_max[nr] = IN_TO_REG(val); it87_write_value(client, IT87_REG_VIN_MAX(nr), data->in_max[nr]); return count; } #define show_in_offset(offset) \ static ssize_t \ show_in##offset (struct device *dev, char *buf) \ { \ return show_in(dev, buf, 0x##offset); \ } \ static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL) #define limit_in_offset(offset) \ static ssize_t \ show_in##offset##_min (struct device *dev, char *buf) \ { \ return show_in_min(dev, buf, 0x##offset); \ } \ static ssize_t \ show_in##offset##_max (struct device *dev, char *buf) \ { \ return show_in_max(dev, buf, 0x##offset); \ } \ static ssize_t set_in##offset##_min (struct device *dev, \ const char *buf, size_t count) \ { \ return set_in_min(dev, buf, count, 0x##offset); \ } \ static ssize_t set_in##offset##_max (struct device *dev, \ const char *buf, size_t count) \ { \ return set_in_max(dev, buf, count, 0x##offset); \ } \ static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ show_in##offset##_min, set_in##offset##_min) \ static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ show_in##offset##_max, set_in##offset##_max) show_in_offset(0); limit_in_offset(0); show_in_offset(1); limit_in_offset(1); show_in_offset(2); limit_in_offset(2); show_in_offset(3); limit_in_offset(3); show_in_offset(4); limit_in_offset(4); show_in_offset(5); limit_in_offset(5); show_in_offset(6); limit_in_offset(6); show_in_offset(7); limit_in_offset(7); show_in_offset(8); /* 3 temperatures */ static ssize_t show_temp(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])*100 ); } static ssize_t show_temp_max(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])*100); } static ssize_t show_temp_min(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])*100); } static ssize_t set_temp_max(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10)/100; data->temp_high[nr] = TEMP_TO_REG(val); it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); return count; } static ssize_t set_temp_min(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10)/100; data->temp_low[nr] = TEMP_TO_REG(val); it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); return count; } #define show_temp_offset(offset) \ static ssize_t show_temp_##offset (struct device *dev, char *buf) \ { \ return show_temp(dev, buf, 0x##offset - 1); \ } \ static ssize_t \ show_temp_##offset##_max (struct device *dev, char *buf) \ { \ return show_temp_max(dev, buf, 0x##offset - 1); \ } \ static ssize_t \ show_temp_##offset##_min (struct device *dev, char *buf) \ { \ return show_temp_min(dev, buf, 0x##offset - 1); \ } \ static ssize_t set_temp_##offset##_max (struct device *dev, \ const char *buf, size_t count) \ { \ return set_temp_max(dev, buf, count, 0x##offset - 1); \ } \ static ssize_t set_temp_##offset##_min (struct device *dev, \ const char *buf, size_t count) \ { \ return set_temp_min(dev, buf, count, 0x##offset - 1); \ } \ static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL) \ static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ show_temp_##offset##_max, set_temp_##offset##_max) \ static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_##offset##_min, set_temp_##offset##_min) show_temp_offset(1); show_temp_offset(2); show_temp_offset(3); static ssize_t show_sensor(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); if (data->sensor & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ if (data->sensor & (8 << nr)) return sprintf(buf, "2\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } static ssize_t set_sensor(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); data->sensor &= ~(1 << nr); data->sensor &= ~(8 << nr); /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ if (val == 3) data->sensor |= 1 << nr; else if (val == 2) data->sensor |= 8 << nr; else if (val != 0) return -EINVAL; it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); return count; } #define show_sensor_offset(offset) \ static ssize_t show_sensor_##offset (struct device *dev, char *buf) \ { \ return show_sensor(dev, buf, 0x##offset - 1); \ } \ static ssize_t set_sensor_##offset (struct device *dev, \ const char *buf, size_t count) \ { \ return set_sensor(dev, buf, count, 0x##offset - 1); \ } \ static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ show_sensor_##offset, set_sensor_##offset) show_sensor_offset(1); show_sensor_offset(2); show_sensor_offset(3); /* 3 Fans */ static ssize_t show_fan(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr])) ); } static ssize_t show_fan_min(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) ); } static ssize_t show_fan_div(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) ); } static ssize_t set_fan_min(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); return count; } static ssize_t set_fan_div(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); int i, min[3]; u8 old = it87_read_value(client, IT87_REG_FAN_DIV); for (i = 0; i < 3; i++) min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i])); switch (nr) { case 0: case 1: data->fan_div[nr] = DIV_TO_REG(val); break; case 2: if (val < 8) data->fan_div[nr] = 1; else data->fan_div[nr] = 3; } val = old & 0x100; val |= (data->fan_div[0] & 0x07); val |= (data->fan_div[1] & 0x07) << 3; if (data->fan_div[2] == 3) val |= 0x1 << 6; it87_write_value(client, IT87_REG_FAN_DIV, val); for (i = 0; i < 3; i++) { data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); } return count; } #define show_fan_offset(offset) \ static ssize_t show_fan_##offset (struct device *dev, char *buf) \ { \ return show_fan(dev, buf, 0x##offset - 1); \ } \ static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ { \ return show_fan_min(dev, buf, 0x##offset - 1); \ } \ static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ { \ return show_fan_div(dev, buf, 0x##offset - 1); \ } \ static ssize_t set_fan_##offset##_min (struct device *dev, \ const char *buf, size_t count) \ { \ return set_fan_min(dev, buf, count, 0x##offset - 1); \ } \ static ssize_t set_fan_##offset##_div (struct device *dev, \ const char *buf, size_t count) \ { \ return set_fan_div(dev, buf, count, 0x##offset - 1); \ } \ static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL) \ static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ show_fan_##offset##_min, set_fan_##offset##_min) \ static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ show_fan_##offset##_div, set_fan_##offset##_div) show_fan_offset(1); show_fan_offset(2); show_fan_offset(3); /* Alarms */ static ssize_t show_alarms(struct device *dev, char *buf) { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms)); } static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL); /* This function is called when: * it87_driver is inserted (when this module is loaded), for each available adapter * when a new adapter is inserted (and it87_driver is still present) */ static int it87_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_ADAP_CLASS_SMBUS)) return 0; return i2c_detect(adapter, &addr_data, it87_detect); } /* This function is called by i2c_detect */ int it87_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; struct it87_data *data; int err = 0; const char *name = ""; int is_isa = i2c_is_isa_adapter(adapter); if (!is_isa && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto ERROR0; /* Reserve the ISA region */ if (is_isa) if (!request_region(address, IT87_EXTENT, name)) goto ERROR0; /* Probe whether there is anything available on this address. Already done for SMBus clients */ if (kind < 0) { if (is_isa) { #define REALLY_SLOW_IO /* We need the timeouts for at least some IT87-like chips. But only if we read 'undefined' registers. */ i = inb_p(address + 1); if (inb_p(address + 2) != i || inb_p(address + 3) != i || inb_p(address + 7) != i) { err = -ENODEV; goto ERROR1; } #undef REALLY_SLOW_IO /* Let's just hope nothing breaks here */ i = inb_p(address + 5) & 0x7f; outb_p(~i & 0x7f, address + 5); if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { outb_p(i, address + 5); err = -ENODEV; goto ERROR1; } } } /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access it87_{read,write}_value. */ if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } memset(data, 0, sizeof(struct it87_data)); new_client = &data->client; if (is_isa) init_MUTEX(&data->lock); i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; new_client->driver = &it87_driver; new_client->flags = 0; /* Now, we do the remaining detection. */ if (kind < 0) { if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) || (!is_isa && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) { err = -ENODEV; goto ERROR2; } } /* Determine the chip type. */ if (kind <= 0) { i = it87_read_value(new_client, IT87_REG_CHIPID); if (i == 0x90) { kind = it87; } else { if (kind == 0) dev_info(&adapter->dev, "Ignoring 'force' parameter for unknown chip at " "adapter %d, address 0x%02x\n", i2c_adapter_id(adapter), address); err = -ENODEV; goto ERROR2; } } if (kind == it87) { name = "it87"; } /* Fill in the remaining client fields and put it into the global list */ strlcpy(new_client->name, name, I2C_NAME_SIZE); data->type = kind; new_client->id = it87_id++; data->valid = 0; init_MUTEX(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) goto ERROR2; /* Initialize the IT87 chip */ it87_init_client(new_client, data); /* Register sysfs hooks */ device_create_file(&new_client->dev, &dev_attr_in0_input); device_create_file(&new_client->dev, &dev_attr_in1_input); device_create_file(&new_client->dev, &dev_attr_in2_input); device_create_file(&new_client->dev, &dev_attr_in3_input); device_create_file(&new_client->dev, &dev_attr_in4_input); device_create_file(&new_client->dev, &dev_attr_in5_input); device_create_file(&new_client->dev, &dev_attr_in6_input); device_create_file(&new_client->dev, &dev_attr_in7_input); device_create_file(&new_client->dev, &dev_attr_in8_input); device_create_file(&new_client->dev, &dev_attr_in0_min); device_create_file(&new_client->dev, &dev_attr_in1_min); device_create_file(&new_client->dev, &dev_attr_in2_min); device_create_file(&new_client->dev, &dev_attr_in3_min); device_create_file(&new_client->dev, &dev_attr_in4_min); device_create_file(&new_client->dev, &dev_attr_in5_min); device_create_file(&new_client->dev, &dev_attr_in6_min); device_create_file(&new_client->dev, &dev_attr_in7_min); device_create_file(&new_client->dev, &dev_attr_in0_max); device_create_file(&new_client->dev, &dev_attr_in1_max); device_create_file(&new_client->dev, &dev_attr_in2_max); device_create_file(&new_client->dev, &dev_attr_in3_max); device_create_file(&new_client->dev, &dev_attr_in4_max); device_create_file(&new_client->dev, &dev_attr_in5_max); device_create_file(&new_client->dev, &dev_attr_in6_max); device_create_file(&new_client->dev, &dev_attr_in7_max); device_create_file(&new_client->dev, &dev_attr_temp1_input); device_create_file(&new_client->dev, &dev_attr_temp2_input); device_create_file(&new_client->dev, &dev_attr_temp3_input); device_create_file(&new_client->dev, &dev_attr_temp1_max); device_create_file(&new_client->dev, &dev_attr_temp2_max); device_create_file(&new_client->dev, &dev_attr_temp3_max); device_create_file(&new_client->dev, &dev_attr_temp1_min); device_create_file(&new_client->dev, &dev_attr_temp2_min); device_create_file(&new_client->dev, &dev_attr_temp3_min); device_create_file(&new_client->dev, &dev_attr_temp1_type); device_create_file(&new_client->dev, &dev_attr_temp2_type); device_create_file(&new_client->dev, &dev_attr_temp3_type); device_create_file(&new_client->dev, &dev_attr_fan1_input); device_create_file(&new_client->dev, &dev_attr_fan2_input); device_create_file(&new_client->dev, &dev_attr_fan3_input); device_create_file(&new_client->dev, &dev_attr_fan1_min); device_create_file(&new_client->dev, &dev_attr_fan2_min); device_create_file(&new_client->dev, &dev_attr_fan3_min); device_create_file(&new_client->dev, &dev_attr_fan1_div); device_create_file(&new_client->dev, &dev_attr_fan2_div); device_create_file(&new_client->dev, &dev_attr_fan3_div); device_create_file(&new_client->dev, &dev_attr_alarms); return 0; ERROR2: kfree(data); ERROR1: if (is_isa) release_region(address, IT87_EXTENT); ERROR0: return err; } static int it87_detach_client(struct i2c_client *client) { int err; if ((err = i2c_detach_client(client))) { dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); return err; } if(i2c_is_isa_client(client)) release_region(client->addr, IT87_EXTENT); kfree(i2c_get_clientdata(client)); return 0; } /* The SMBus locks itself, but ISA access must be locked explicitely! We don't want to lock the whole ISA bus, so we lock each client separately. We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, would slow down the IT87 access and should not be necessary. There are some ugly typecasts here, but the good new is - they should nowhere else be necessary! */ static int it87_read_value(struct i2c_client *client, u8 reg) { struct it87_data *data = i2c_get_clientdata(client); int res; if (i2c_is_isa_client(client)) { down(&data->lock); outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); res = inb_p(client->addr + IT87_DATA_REG_OFFSET); up(&data->lock); return res; } else return i2c_smbus_read_byte_data(client, reg); } /* The SMBus locks itself, but ISA access muse be locked explicitely! We don't want to lock the whole ISA bus, so we lock each client separately. We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, would slow down the IT87 access and should not be necessary. There are some ugly typecasts here, but the good new is - they should nowhere else be necessary! */ static int it87_write_value(struct i2c_client *client, u8 reg, u8 value) { struct it87_data *data = i2c_get_clientdata(client); if (i2c_is_isa_client(client)) { down(&data->lock); outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); outb_p(value, client->addr + IT87_DATA_REG_OFFSET); up(&data->lock); return 0; } else return i2c_smbus_write_byte_data(client, reg, value); } /* Called when we have found a new IT87. */ static void it87_init_client(struct i2c_client *client, struct it87_data *data) { int tmp; if (reset) { /* Reset all except Watchdog values and last conversion values This sets fan-divs to 2, among others */ it87_write_value(client, IT87_REG_CONFIG, 0x80); } /* Check if temperature channnels are reset manually or by some reason */ tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); if ((tmp & 0x3f) == 0) { /* Temp1,Temp3=thermistor; Temp2=thermal diode */ tmp = (tmp & 0xc0) | 0x2a; it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); } data->sensor = tmp; /* Check if voltage monitors are reset manually or by some reason */ tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); if ((tmp & 0xff) == 0) { /* Enable all voltage monitors */ it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); } /* Check if tachometers are reset manually or by some reason */ tmp = it87_read_value(client, IT87_REG_FAN_CTRL); if ((tmp & 0x70) == 0) { /* Enable all fan tachometers */ tmp = (tmp & 0x8f) | 0x70; it87_write_value(client, IT87_REG_FAN_CTRL, tmp); } /* Start monitoring */ it87_write_value(client, IT87_REG_CONFIG, (it87_read_value(client, IT87_REG_CONFIG) & 0x36) | (update_vbat ? 0x41 : 0x01)); } static struct it87_data *it87_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int i; down(&data->update_lock); if ((jiffies - data->last_updated > HZ + HZ / 2) || (jiffies < data->last_updated) || !data->valid) { if (update_vbat) { /* Cleared after each update, so reenable. Value returned by this read will be previous value */ it87_write_value(client, IT87_REG_CONFIG, it87_read_value(client, IT87_REG_CONFIG) | 0x40); } for (i = 0; i <= 7; i++) { data->in[i] = it87_read_value(client, IT87_REG_VIN(i)); data->in_min[i] = it87_read_value(client, IT87_REG_VIN_MIN(i)); data->in_max[i] = it87_read_value(client, IT87_REG_VIN_MAX(i)); } data->in[8] = it87_read_value(client, IT87_REG_VIN(8)); /* Temperature sensor doesn't have limit registers, set to min and max value */ data->in_min[8] = 0; data->in_max[8] = 255; for (i = 0; i < 3; i++) { data->fan[i] = it87_read_value(client, IT87_REG_FAN(i)); data->fan_min[i] = it87_read_value(client, IT87_REG_FAN_MIN(i)); } for (i = 0; i < 3; i++) { data->temp[i] = it87_read_value(client, IT87_REG_TEMP(i)); data->temp_high[i] = it87_read_value(client, IT87_REG_TEMP_HIGH(i)); data->temp_low[i] = it87_read_value(client, IT87_REG_TEMP_LOW(i)); } /* The 8705 does not have VID capability */ data->vid = 0x1f; i = it87_read_value(client, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; data->fan_div[2] = (i & 0x40) ? 3 : 1; data->alarms = it87_read_value(client, IT87_REG_ALARM1) | (it87_read_value(client, IT87_REG_ALARM2) << 8) | (it87_read_value(client, IT87_REG_ALARM3) << 16); data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); data->last_updated = jiffies; data->valid = 1; } up(&data->update_lock); return data; } static int __init sm_it87_init(void) { return i2c_add_driver(&it87_driver); } static void __exit sm_it87_exit(void) { i2c_del_driver(&it87_driver); } MODULE_AUTHOR("Chris Gauthron "); MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); MODULE_PARM(update_vbat, "i"); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); MODULE_PARM(reset, "i"); MODULE_PARM_DESC(reset, "Reset the chip's registers, default no"); MODULE_LICENSE("GPL"); module_init(sm_it87_init); module_exit(sm_it87_exit);