/* * Promise TX2/TX4/TX2000/133 IDE driver * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * Split from: * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 * Copyright (C) 1998-2002 Andre Hedrick * Copyright (C) 2005-2006 MontaVista Software, Inc. * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) * Released under terms of General Public License */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_PPC_PMAC #include #include #endif #define PDC202_DEBUG_CABLE 0 #undef DEBUG #ifdef DEBUG #define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) #else #define DBG(fmt, args...) #endif static const char *pdc_quirk_drives[] = { "QUANTUM FIREBALLlct08 08", "QUANTUM FIREBALLP KA6.4", "QUANTUM FIREBALLP KA9.1", "QUANTUM FIREBALLP LM20.4", "QUANTUM FIREBALLP KX13.6", "QUANTUM FIREBALLP KX20.5", "QUANTUM FIREBALLP KX27.3", "QUANTUM FIREBALLP LM20.5", NULL }; static u8 max_dma_rate(struct pci_dev *pdev) { u8 mode; switch(pdev->device) { case PCI_DEVICE_ID_PROMISE_20277: case PCI_DEVICE_ID_PROMISE_20276: case PCI_DEVICE_ID_PROMISE_20275: case PCI_DEVICE_ID_PROMISE_20271: case PCI_DEVICE_ID_PROMISE_20269: mode = 4; break; case PCI_DEVICE_ID_PROMISE_20270: case PCI_DEVICE_ID_PROMISE_20268: mode = 3; break; default: return 0; } return mode; } static u8 pdcnew_ratemask(ide_drive_t *drive) { u8 mode = max_dma_rate(HWIF(drive)->pci_dev); if (!eighty_ninty_three(drive)) mode = min_t(u8, mode, 1); return mode; } static int check_in_drive_lists(ide_drive_t *drive, const char **list) { struct hd_driveid *id = drive->id; if (pdc_quirk_drives == list) { while (*list) { if (strstr(id->model, *list++)) { return 2; } } } else { while (*list) { if (!strcmp(*list++,id->model)) { return 1; } } } return 0; } /** * get_indexed_reg - Get indexed register * @hwif: for the port address * @index: index of the indexed register */ static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) { u8 value; hwif->OUTB(index, hwif->dma_vendor1); value = hwif->INB(hwif->dma_vendor3); DBG("index[%02X] value[%02X]\n", index, value); return value; } /** * set_indexed_reg - Set indexed register * @hwif: for the port address * @index: index of the indexed register */ static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) { hwif->OUTB(index, hwif->dma_vendor1); hwif->OUTB(value, hwif->dma_vendor3); DBG("index[%02X] value[%02X]\n", index, value); } /* * ATA Timing Tables based on 133 MHz PLL output clock. * * If the PLL outputs 100 MHz clock, the ASIC hardware will set * the timing registers automatically when "set features" command is * issued to the device. However, if the PLL output clock is 133 MHz, * the following tables must be used. */ static struct pio_timing { u8 reg0c, reg0d, reg13; } pio_timings [] = { { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ }; static struct mwdma_timing { u8 reg0e, reg0f; } mwdma_timings [] = { { 0xdf, 0x5f }, /* MWDMA mode 0 */ { 0x6b, 0x27 }, /* MWDMA mode 1 */ { 0x69, 0x25 }, /* MWDMA mode 2 */ }; static struct udma_timing { u8 reg10, reg11, reg12; } udma_timings [] = { { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) { ide_hwif_t *hwif = HWIF(drive); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; int err; speed = ide_rate_filter(pdcnew_ratemask(drive), speed); /* * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will * automatically set the timing registers based on 100 MHz PLL output. */ err = ide_config_drive_speed(drive, speed); /* * As we set up the PLL to output 133 MHz for UltraDMA/133 capable * chips, we must override the default register settings... */ if (max_dma_rate(hwif->pci_dev) == 4) { u8 mode = speed & 0x07; switch (speed) { case XFER_UDMA_6: case XFER_UDMA_5: case XFER_UDMA_4: case XFER_UDMA_3: case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: set_indexed_reg(hwif, 0x10 + adj, udma_timings[mode].reg10); set_indexed_reg(hwif, 0x11 + adj, udma_timings[mode].reg11); set_indexed_reg(hwif, 0x12 + adj, udma_timings[mode].reg12); break; case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: set_indexed_reg(hwif, 0x0e + adj, mwdma_timings[mode].reg0e); set_indexed_reg(hwif, 0x0f + adj, mwdma_timings[mode].reg0f); break; case XFER_PIO_4: case XFER_PIO_3: case XFER_PIO_2: case XFER_PIO_1: case XFER_PIO_0: set_indexed_reg(hwif, 0x0c + adj, pio_timings[mode].reg0c); set_indexed_reg(hwif, 0x0d + adj, pio_timings[mode].reg0d); set_indexed_reg(hwif, 0x13 + adj, pio_timings[mode].reg13); break; default: printk(KERN_ERR "pdc202xx_new: " "Unknown speed %d ignored\n", speed); } } else if (speed == XFER_UDMA_2) { /* Set tHOLD bit to 0 if using UDMA mode 2 */ u8 tmp = get_indexed_reg(hwif, 0x10 + adj); set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); } return err; } /* 0 1 2 3 4 5 6 7 8 * 960, 480, 390, 300, 240, 180, 120, 90, 60 * 180, 150, 120, 90, 60 * DMA_Speed * 180, 120, 90, 90, 90, 60, 30 * 11, 5, 4, 3, 2, 1, 0 */ static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) { pio = ide_get_best_pio_mode(drive, pio, 4, NULL); (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio); } static u8 pdcnew_cable_detect(ide_hwif_t *hwif) { return get_indexed_reg(hwif, 0x0b) & 0x04; } static int config_chipset_for_dma(ide_drive_t *drive) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = HWIF(drive); u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0; u8 cable = pdcnew_cable_detect(hwif); u8 speed; if (ultra_66 && cable) { printk(KERN_WARNING "Warning: %s channel " "requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary" : "Primary"); printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); } if (drive->media != ide_disk) return 0; if (id->capability & 4) { /* * Set IORDY_EN & PREFETCH_EN (this seems to have * NO real effect since this register is reloaded * by hardware when the transfer mode is selected) */ u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00; tmp = get_indexed_reg(hwif, 0x13 + adj); set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); } speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); if (!speed) return 0; (void) hwif->speedproc(drive, speed); return ide_dma_enable(drive); } static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct hd_driveid *id = drive->id; drive->init_speed = 0; if (id && (id->capability & 1) && drive->autodma) { if (ide_use_dma(drive)) { if (config_chipset_for_dma(drive)) return hwif->ide_dma_on(drive); } goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: hwif->tuneproc(drive, 255); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ return 0; } static int pdcnew_quirkproc(ide_drive_t *drive) { return check_in_drive_lists(drive, pdc_quirk_drives); } static int pdcnew_ide_dma_lostirq(ide_drive_t *drive) { if (HWIF(drive)->resetproc != NULL) HWIF(drive)->resetproc(drive); return __ide_dma_lostirq(drive); } static int pdcnew_ide_dma_timeout(ide_drive_t *drive) { if (HWIF(drive)->resetproc != NULL) HWIF(drive)->resetproc(drive); return __ide_dma_timeout(drive); } static void pdcnew_reset(ide_drive_t *drive) { /* * Deleted this because it is redundant from the caller. */ printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", HWIF(drive)->channel ? "Secondary" : "Primary"); } /** * read_counter - Read the byte count registers * @dma_base: for the port address */ static long __devinit read_counter(u32 dma_base) { u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; u8 cnt0, cnt1, cnt2, cnt3; long count = 0, last; int retry = 3; do { last = count; /* Read the current count */ outb(0x20, pri_dma_base + 0x01); cnt0 = inb(pri_dma_base + 0x03); outb(0x21, pri_dma_base + 0x01); cnt1 = inb(pri_dma_base + 0x03); outb(0x20, sec_dma_base + 0x01); cnt2 = inb(sec_dma_base + 0x03); outb(0x21, sec_dma_base + 0x01); cnt3 = inb(sec_dma_base + 0x03); count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; /* * The 30-bit decrementing counter is read in 4 pieces. * Incorrect value may be read when the most significant bytes * are changing... */ } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", cnt0, cnt1, cnt2, cnt3); return count; } /** * detect_pll_input_clock - Detect the PLL input clock in Hz. * @dma_base: for the port address * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. */ static long __devinit detect_pll_input_clock(unsigned long dma_base) { long start_count, end_count; long pll_input; u8 scr1; start_count = read_counter(dma_base); /* Start the test mode */ outb(0x01, dma_base + 0x01); scr1 = inb(dma_base + 0x03); DBG("scr1[%02X]\n", scr1); outb(scr1 | 0x40, dma_base + 0x03); /* Let the counter run for 10 ms. */ mdelay(10); end_count = read_counter(dma_base); /* Stop the test mode */ outb(0x01, dma_base + 0x01); scr1 = inb(dma_base + 0x03); DBG("scr1[%02X]\n", scr1); outb(scr1 & ~0x40, dma_base + 0x03); /* * Calculate the input clock in Hz * (the clock counter is 30 bit wide and counts down) */ pll_input = ((start_count - end_count) & 0x3ffffff) * 100; DBG("start[%ld] end[%ld]\n", start_count, end_count); return pll_input; } #ifdef CONFIG_PPC_PMAC static void __devinit apple_kiwi_init(struct pci_dev *pdev) { struct device_node *np = pci_device_to_OF_node(pdev); unsigned int class_rev = 0; u8 conf; if (np == NULL || !device_is_compatible(np, "kiwi-root")) return; pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xff; if (class_rev >= 0x03) { /* Setup chip magic config stuff (from darwin) */ pci_read_config_byte (pdev, 0x40, &conf); pci_write_config_byte(pdev, 0x40, (conf | 0x01)); } } #endif /* CONFIG_PPC_PMAC */ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name) { unsigned long dma_base = pci_resource_start(dev, 4); unsigned long sec_dma_base = dma_base + 0x08; long pll_input, pll_output, ratio; int f, r; u8 pll_ctl0, pll_ctl1; if (dev->resource[PCI_ROM_RESOURCE].start) { pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, (unsigned long)dev->resource[PCI_ROM_RESOURCE].start); } #ifdef CONFIG_PPC_PMAC apple_kiwi_init(dev); #endif /* Calculate the required PLL output frequency */ switch(max_dma_rate(dev)) { case 4: /* it's 133 MHz for Ultra133 chips */ pll_output = 133333333; break; case 3: /* and 100 MHz for Ultra100 chips */ default: pll_output = 100000000; break; } /* * Detect PLL input clock. * On some systems, where PCI bus is running at non-standard clock rate * (e.g. 25 or 40 MHz), we have to adjust the cycle time. * PDC20268 and newer chips employ PLL circuit to help correct timing * registers setting. */ pll_input = detect_pll_input_clock(dma_base); printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000); /* Sanity check */ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n", name, pll_input); goto out; } #ifdef DEBUG DBG("pll_output is %ld Hz\n", pll_output); /* Show the current clock value of PLL control register * (maybe already configured by the BIOS) */ outb(0x02, sec_dma_base + 0x01); pll_ctl0 = inb(sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); pll_ctl1 = inb(sec_dma_base + 0x03); DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); #endif /* * Calculate the ratio of F, R and NO * POUT = (F + 2) / (( R + 2) * NO) */ ratio = pll_output / (pll_input / 1000); if (ratio < 8600L) { /* 8.6x */ /* Using NO = 0x01, R = 0x0d */ r = 0x0d; } else if (ratio < 12900L) { /* 12.9x */ /* Using NO = 0x01, R = 0x08 */ r = 0x08; } else if (ratio < 16100L) { /* 16.1x */ /* Using NO = 0x01, R = 0x06 */ r = 0x06; } else if (ratio < 64000L) { /* 64x */ r = 0x00; } else { /* Invalid ratio */ printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio); goto out; } f = (ratio * (r + 2)) / 1000 - 2; DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); if (unlikely(f < 0 || f > 127)) { /* Invalid F */ printk(KERN_ERR "%s: F[%d] invalid!\n", name, f); goto out; } pll_ctl0 = (u8) f; pll_ctl1 = (u8) r; DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); outb(0x02, sec_dma_base + 0x01); outb(pll_ctl0, sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); outb(pll_ctl1, sec_dma_base + 0x03); /* Wait the PLL circuit to be stable */ mdelay(30); #ifdef DEBUG /* * Show the current clock value of PLL control register */ outb(0x02, sec_dma_base + 0x01); pll_ctl0 = inb(sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); pll_ctl1 = inb(sec_dma_base + 0x03); DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); #endif out: return dev->irq; } static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) { hwif->autodma = 0; hwif->tuneproc = &pdcnew_tune_drive; hwif->quirkproc = &pdcnew_quirkproc; hwif->speedproc = &pdcnew_tune_chipset; hwif->resetproc = &pdcnew_reset; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; hwif->ultra_mask = 0x7f; hwif->mwdma_mask = 0x07; hwif->err_stops_fifo = 1; hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate; hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq; hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout; if (!hwif->udma_four) hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1; if (!noautodma) hwif->autodma = 1; hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; #if PDC202_DEBUG_CABLE printk(KERN_DEBUG "%s: %s-pin cable\n", hwif->name, hwif->udma_four ? "80" : "40"); #endif /* PDC202_DEBUG_CABLE */ } static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d) { return ide_setup_pci_device(dev, d); } static int __devinit init_setup_pdc20270(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *findev = NULL; int ret; if ((dev->bus->self && dev->bus->self->vendor == PCI_VENDOR_ID_DEC) && (dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) { if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; d->extra = 0; while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { if ((findev->vendor == dev->vendor) && (findev->device == dev->device) && (PCI_SLOT(findev->devfn) & 2)) { if (findev->irq != dev->irq) { findev->irq = dev->irq; } ret = ide_setup_pci_devices(dev, findev, d); pci_dev_put(findev); return ret; } } } return ide_setup_pci_device(dev, d); } static int __devinit init_setup_pdc20276(struct pci_dev *dev, ide_pci_device_t *d) { if ((dev->bus->self) && (dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) && ((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) || (dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) { printk(KERN_INFO "ide: Skipping Promise PDC20276 " "attached to I2O RAID controller.\n"); return -ENODEV; } return ide_setup_pci_device(dev, d); } static ide_pci_device_t pdcnew_chipsets[] __devinitdata = { { /* 0 */ .name = "PDC20268", .init_setup = init_setup_pdcnew, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 1 */ .name = "PDC20269", .init_setup = init_setup_pdcnew, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 2 */ .name = "PDC20270", .init_setup = init_setup_pdc20270, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 3 */ .name = "PDC20271", .init_setup = init_setup_pdcnew, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 4 */ .name = "PDC20275", .init_setup = init_setup_pdcnew, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 5 */ .name = "PDC20276", .init_setup = init_setup_pdc20276, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, },{ /* 6 */ .name = "PDC20277", .init_setup = init_setup_pdcnew, .init_chipset = init_chipset_pdcnew, .init_hwif = init_hwif_pdc202new, .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, } }; /** * pdc202new_init_one - called when a pdc202xx is found * @dev: the pdc202new device * @id: the matching pci id * * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) { ide_pci_device_t *d = &pdcnew_chipsets[id->driver_data]; return d->init_setup(dev, d); } static struct pci_device_id pdc202new_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20269, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20270, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20271, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20275, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20276, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, { PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20277, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, { 0, }, }; MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); static struct pci_driver driver = { .name = "Promise_IDE", .id_table = pdc202new_pci_tbl, .probe = pdc202new_init_one, }; static int __init pdc202new_ide_init(void) { return ide_pci_register_driver(&driver); } module_init(pdc202new_ide_init); MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher"); MODULE_LICENSE("GPL");