/* * USB HandSpring Visor, Palm m50x, and Sony Clie driver * (supports all of the Palm OS USB devices) * * Copyright (C) 1999 - 2004 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this driver * * (06/03/2003) Judd Montgomery * Added support for module parameter options for untested/unknown * devices. * * (03/09/2003) gkh * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl * for the information. * * (03/05/2003) gkh * Think Treo support is now working. * * (04/03/2002) gkh * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI * for the information. * * (03/27/2002) gkh * Removed assumptions that port->tty was always valid (is not true * for usb serial console devices.) * * (03/23/2002) gkh * Added support for the Palm i705 device, thanks to Thomas Riemer * for the information. * * (03/21/2002) gkh * Added support for the Palm m130 device, thanks to Udo Eisenbarth * for the information. * * (02/27/2002) gkh * Reworked the urb handling logic. We have no more pool, but dynamically * allocate the urb and the transfer buffer on the fly. In testing this * does not incure any measurable overhead. This also relies on the fact * that we have proper reference counting logic for urbs. * * (02/21/2002) SilaS * Added initial support for the Palm m515 devices. * * (02/14/2002) gkh * Added support for the Clie S-360 device. * * (12/18/2001) gkh * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand * for the patch. * * (11/11/2001) gkh * Added support for the m125 devices, and added check to prevent oopses * for Clié devices that lie about the number of ports they have. * * (08/30/2001) gkh * Added support for the Clie devices, both the 3.5 and 4.0 os versions. * Many thanks to Daniel Burke, and Bryan Payne for helping with this. * * (08/23/2001) gkh * fixed a few potential bugs pointed out by Oliver Neukum. * * (05/30/2001) gkh * switched from using spinlock to a semaphore, which fixes lots of problems. * * (05/28/2000) gkh * Added initial support for the Palm m500 and Palm m505 devices. * * (04/08/2001) gb * Identify version on module load. * * (01/21/2000) gkh * Added write_room and chars_in_buffer, as they were previously using the * generic driver versions which is all wrong now that we are using an urb * pool. Thanks to Wolfgang Grandegger for pointing this out to me. * Removed count assignment in the write function, which was not needed anymore * either. Thanks to Al Borchers for pointing this out. * * (12/12/2000) gkh * Moved MOD_DEC to end of visor_close to be nicer, as the final write * message can sleep. * * (11/12/2000) gkh * Fixed bug with data being dropped on the floor by forcing tty->low_latency * to be on. Hopefully this fixes the OHCI issue! * * (11/01/2000) Adam J. Richter * usb_device_id table support * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. * * (09/11/2000) gkh * Got rid of always calling kmalloc for every urb we wrote out to the * device. * Added visor_read_callback so we can keep track of bytes in and out for * those people who like to know the speed of their device. * Removed DEBUG #ifdefs with call to usb_serial_debug_data * * (09/06/2000) gkh * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ * the host controller drivers set urb->dev = NULL when the urb is finished. * * (08/28/2000) gkh * Added locks for SMP safeness. * * (08/08/2000) gkh * Fixed endian problem in visor_startup. * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more * than once. * * (07/23/2000) gkh * Added pool of write urbs to speed up transfers to the visor. * * (07/19/2000) gkh * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * * (07/03/2000) gkh * Added visor_set_ioctl and visor_set_termios functions (they don't do much * of anything, but are good for debugging.) * * (06/25/2000) gkh * Fixed bug in visor_unthrottle that should help with the disconnect in PPP * bug that people have been reporting. * * (06/23/2000) gkh * Cleaned up debugging statements in a quest to find UHCI timeout bug. * * (04/27/2000) Ryan VanderBijl * Fixed memory leak in visor_close * * (03/26/2000) gkh * Split driver up into device specific pieces. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_USB_SERIAL_DEBUG static int debug = 1; #else static int debug; #endif #include "usb-serial.h" #include "visor.h" /* * Version Information */ #define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" /* function prototypes for a handspring visor */ static int visor_open (struct usb_serial_port *port, struct file *filp); static void visor_close (struct usb_serial_port *port, struct file *filp); static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count); static int visor_write_room (struct usb_serial_port *port); static int visor_chars_in_buffer (struct usb_serial_port *port); static void visor_throttle (struct usb_serial_port *port); static void visor_unthrottle (struct usb_serial_port *port); static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id); static int visor_calc_num_ports(struct usb_serial *serial); static void visor_shutdown (struct usb_serial *serial); static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios); static void visor_write_bulk_callback (struct urb *urb, struct pt_regs *regs); static void visor_read_bulk_callback (struct urb *urb, struct pt_regs *regs); static void visor_read_int_callback (struct urb *urb, struct pt_regs *regs); static int clie_3_5_startup (struct usb_serial *serial); static int treo_attach (struct usb_serial *serial); static int clie_5_attach (struct usb_serial *serial); static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id); static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id); /* Parameters that may be passed into the module. */ static __u16 vendor; static __u16 product; static struct usb_device_id id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), .driver_info = (kernel_ulong_t)&palm_os_3_probe }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { }, /* optional parameter entry */ { } /* Terminating entry */ }; static struct usb_device_id clie_id_5_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { }, /* optional parameter entry */ { } /* Terminating entry */ }; static struct usb_device_id clie_id_3_5_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, { } /* Terminating entry */ }; static struct usb_device_id id_table_combined [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) }, { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) }, { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) }, { }, /* optional parameter entry */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver visor_driver = { .owner = THIS_MODULE, .name = "visor", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_device_type handspring_device = { .owner = THIS_MODULE, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, .num_bulk_out = 2, .num_ports = 2, .open = visor_open, .close = visor_close, .throttle = visor_throttle, .unthrottle = visor_unthrottle, .attach = treo_attach, .probe = visor_probe, .calc_num_ports = visor_calc_num_ports, .shutdown = visor_shutdown, .ioctl = visor_ioctl, .set_termios = visor_set_termios, .write = visor_write, .write_room = visor_write_room, .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, .read_int_callback = visor_read_int_callback, }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_device_type clie_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, .num_bulk_out = 2, .num_ports = 2, .open = visor_open, .close = visor_close, .throttle = visor_throttle, .unthrottle = visor_unthrottle, .attach = clie_5_attach, .probe = visor_probe, .calc_num_ports = visor_calc_num_ports, .shutdown = visor_shutdown, .ioctl = visor_ioctl, .set_termios = visor_set_termios, .write = visor_write, .write_room = visor_write_room, .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, .read_int_callback = visor_read_int_callback, }; /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_device_type clie_3_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, .num_bulk_out = 1, .num_ports = 1, .open = visor_open, .close = visor_close, .throttle = visor_throttle, .unthrottle = visor_unthrottle, .attach = clie_3_5_startup, .ioctl = visor_ioctl, .set_termios = visor_set_termios, .write = visor_write, .write_room = visor_write_room, .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, }; static int bytes_in; static int bytes_out; /****************************************************************************** * Handspring Visor specific driver functions ******************************************************************************/ static int visor_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; int result = 0; dbg("%s - port %d", __FUNCTION__, port->number); if (!port->read_urb) { /* this is needed for some brain dead Sony devices */ dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n"); return -ENODEV; } bytes_in = 0; bytes_out = 0; /* * Force low_latency on so that our tty_push actually forces the data * through, otherwise it is scheduled, and with high data rates (like * with OHCI) data can get lost. */ if (port->tty) port->tty->low_latency = 1; /* Start reading from the device */ usb_fill_bulk_urb (port->read_urb, serial->dev, usb_rcvbulkpipe (serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); goto exit; } if (port->interrupt_in_urb) { dbg("%s - adding interrupt input for treo", __FUNCTION__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result); } exit: return result; } static void visor_close (struct usb_serial_port *port, struct file * filp) { unsigned char *transfer_buffer; dbg("%s - port %d", __FUNCTION__, port->number); /* shutdown our urbs */ usb_unlink_urb (port->read_urb); if (port->interrupt_in_urb) usb_unlink_urb (port->interrupt_in_urb); /* Try to send shutdown message, if the device is gone, this will just fail. */ transfer_buffer = kmalloc (0x12, GFP_KERNEL); if (transfer_buffer) { usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), VISOR_CLOSE_NOTIFICATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); kfree (transfer_buffer); } /* Uncomment the following line if you want to see some statistics in your syslog */ /* dev_info (&port->dev, "Bytes In = %d Bytes Out = %d\n", bytes_in, bytes_out); */ } static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct urb *urb; unsigned char *buffer; int status; dbg("%s - port %d", __FUNCTION__, port->number); buffer = kmalloc (count, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); return -ENOMEM; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { dev_err(&port->dev, "no more free urbs\n"); kfree (buffer); return -ENOMEM; } if (from_user) { if (copy_from_user (buffer, buf, count)) { kfree (buffer); usb_free_urb (urb); return -EFAULT; } } else { memcpy (buffer, buf, count); } usb_serial_debug_data (__FILE__, __FUNCTION__, count, buffer); usb_fill_bulk_urb (urb, serial->dev, usb_sndbulkpipe (serial->dev, port->bulk_out_endpointAddress), buffer, count, visor_write_bulk_callback, port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status); count = status; } else { bytes_out += count; } /* we are done with this urb, so let the host driver * really free it when it is finished with it */ usb_free_urb (urb); return count; } static int visor_write_room (struct usb_serial_port *port) { dbg("%s - port %d", __FUNCTION__, port->number); /* * We really can take anything the user throws at us * but let's pick a nice big number to tell the tty * layer that we have lots of free space */ return 2048; } static int visor_chars_in_buffer (struct usb_serial_port *port) { dbg("%s - port %d", __FUNCTION__, port->number); /* * We can't really account for how much data we * have sent out, but hasn't made it through to the * device, so just tell the tty layer that everything * is flushed. */ return 0; } static void visor_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); dbg("%s - port %d", __FUNCTION__, port->number); if (urb->status) dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); schedule_work(&port->work); } static void visor_read_bulk_callback (struct urb *urb, struct pt_regs *regs) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int i; int result; dbg("%s - port %d", __FUNCTION__, port->number); if (urb->status) { dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); return; } usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data); tty = port->tty; if (tty && urb->actual_length) { for (i = 0; i < urb->actual_length ; ++i) { /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ if(tty->flip.count >= TTY_FLIPBUF_SIZE) { tty_flip_buffer_push(tty); } /* this doesn't actually push the data through unless tty->low_latency is set */ tty_insert_flip_char(tty, data[i], 0); } tty_flip_buffer_push(tty); } bytes_in += urb->actual_length; /* Continue trying to always read */ usb_fill_bulk_urb (port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); return; } static void visor_read_int_callback (struct urb *urb, struct pt_regs *regs) { int result; switch (urb->status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); return; default: dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); goto exit; } /* * This information is still unknown what it can be used for. * If anyone has an idea, please let the author know... * * Rumor has it this endpoint is used to notify when data * is ready to be read from the bulk ones. */ usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer); exit: result = usb_submit_urb (urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", __FUNCTION__, result); } static void visor_throttle (struct usb_serial_port *port) { dbg("%s - port %d", __FUNCTION__, port->number); usb_unlink_urb (port->read_urb); } static void visor_unthrottle (struct usb_serial_port *port) { int result; dbg("%s - port %d", __FUNCTION__, port->number); port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); } static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id) { struct device *dev = &serial->dev->dev; struct visor_connection_info *connection_info; unsigned char *transfer_buffer; char *string; int retval = 0; int i; int num_ports = 0; dbg("%s", __FUNCTION__); transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__, sizeof(*connection_info)); return -ENOMEM; } /* send a get connection info request */ retval = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_GET_CONNECTION_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, sizeof(*connection_info), 300); if (retval < 0) { dev_err(dev, "%s - error %d getting connection information\n", __FUNCTION__, retval); goto exit; } if (retval == sizeof(*connection_info)) { connection_info = (struct visor_connection_info *)transfer_buffer; le16_to_cpus(&connection_info->num_ports); num_ports = connection_info->num_ports; for (i = 0; i < num_ports; ++i) { switch (connection_info->connections[i].port_function_id) { case VISOR_FUNCTION_GENERIC: string = "Generic"; break; case VISOR_FUNCTION_DEBUGGER: string = "Debugger"; break; case VISOR_FUNCTION_HOTSYNC: string = "HotSync"; break; case VISOR_FUNCTION_CONSOLE: string = "Console"; break; case VISOR_FUNCTION_REMOTE_FILE_SYS: string = "Remote File System"; break; default: string = "unknown"; break; } dev_info(dev, "%s: port %d, is for %s use\n", serial->type->name, connection_info->connections[i].port, string); } } /* * Handle devices that report invalid stuff here. */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", serial->type->name); num_ports = 2; } dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, num_ports); /* * save off our num_ports info so that we can use it in the * calc_num_ports callback */ usb_set_serial_data(serial, (void *)(long)num_ports); /* ask for the number of bytes available, but ignore the response as it is broken */ retval = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_REQUEST_BYTES_AVAILABLE, 0xc2, 0x0000, 0x0005, transfer_buffer, 0x02, 300); if (retval < 0) dev_err(dev, "%s - error %d getting bytes available request\n", __FUNCTION__, retval); retval = 0; exit: kfree (transfer_buffer); return retval; } static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id) { struct device *dev = &serial->dev->dev; struct palm_ext_connection_info *connection_info; unsigned char *transfer_buffer; int retval; dbg("%s", __FUNCTION__); transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__, sizeof(*connection_info)); return -ENOMEM; } retval = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), PALM_GET_EXT_CONNECTION_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, sizeof (*connection_info), 300); if (retval < 0) dev_err(dev, "%s - error %d getting connection info\n", __FUNCTION__, retval); else usb_serial_debug_data (__FILE__, __FUNCTION__, 0x14, transfer_buffer); kfree (transfer_buffer); return 0; } static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id) { int retval = 0; int (*startup) (struct usb_serial *serial, const struct usb_device_id *id); dbg("%s", __FUNCTION__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { err("active config #%d != 1 ??", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } if (id->driver_info) { startup = (void *)id->driver_info; retval = startup(serial, id); } return retval; } static int visor_calc_num_ports (struct usb_serial *serial) { int num_ports = (int)(long)(usb_get_serial_data(serial)); if (num_ports) usb_set_serial_data(serial, NULL); return num_ports; } static int clie_3_5_startup (struct usb_serial *serial) { struct device *dev = &serial->dev->dev; int result; u8 data; dbg("%s", __FUNCTION__); /* * Note that PEG-300 series devices expect the following two calls. */ /* get the config number */ result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_CONFIGURATION, USB_DIR_IN, 0, 0, &data, 1, HZ * 3); if (result < 0) { dev_err(dev, "%s: get config number failed: %d\n", __FUNCTION__, result); return result; } if (result != 1) { dev_err(dev, "%s: get config number bad return length: %d\n", __FUNCTION__, result); return -EIO; } /* get the interface number */ result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_INTERFACE, USB_DIR_IN | USB_RECIP_INTERFACE, 0, 0, &data, 1, HZ * 3); if (result < 0) { dev_err(dev, "%s: get interface number failed: %d\n", __FUNCTION__, result); return result; } if (result != 1) { dev_err(dev, "%s: get interface number bad return length: %d\n", __FUNCTION__, result); return -EIO; } return 0; } static int treo_attach (struct usb_serial *serial) { struct usb_serial_port *swap_port; /* Only do this endpoint hack for the Handspring devices with * interrupt in endpoints, which for now are the Treo devices. */ if ((serial->dev->descriptor.idVendor != HANDSPRING_VENDOR_ID) || (serial->num_interrupt_in == 0)) return 0; dbg("%s", __FUNCTION__); /* * It appears that Treos want to use the 1st interrupt endpoint to * communicate with the 2nd bulk out endpoint, so let's swap the 1st * and 2nd bulk in and interrupt endpoints. Note that swapping the * bulk out endpoints would break lots of apps that want to communicate * on the second port. */ #define COPY_PORT(dest, src) \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress; \ dest->bulk_in_buffer = src->bulk_in_buffer; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ dest->interrupt_in_endpointAddress = src->interrupt_in_endpointAddress; \ dest->interrupt_in_buffer = src->interrupt_in_buffer; swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL); if (!swap_port) return -ENOMEM; COPY_PORT(swap_port, serial->port[0]); COPY_PORT(serial->port[0], serial->port[1]); COPY_PORT(serial->port[1], swap_port); kfree(swap_port); return 0; } static int clie_5_attach (struct usb_serial *serial) { dbg("%s", __FUNCTION__); /* TH55 registers 2 ports. Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0 Communication out to the UX50/TH55 uses bulk_out_endpointAddress from port 1 Lets do a quick and dirty mapping */ /* some sanity check */ if (serial->num_ports < 2) return -1; /* port 0 now uses the modified endpoint Address */ serial->port[0]->bulk_out_endpointAddress = serial->port[1]->bulk_out_endpointAddress; return 0; } static void visor_shutdown (struct usb_serial *serial) { dbg("%s", __FUNCTION__); } static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); return -ENOIOCTLCMD; } /* This function is all nice and good, but we don't change anything based on it :) */ static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag; dbg("%s - port %d", __FUNCTION__, port->number); if ((!port->tty) || (!port->tty->termios)) { dbg("%s - no tty structures", __FUNCTION__); return; } cflag = port->tty->termios->c_cflag; /* check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { dbg("%s - nothing to change...", __FUNCTION__); return; } } /* get the byte size */ switch (cflag & CSIZE) { case CS5: dbg("%s - data bits = 5", __FUNCTION__); break; case CS6: dbg("%s - data bits = 6", __FUNCTION__); break; case CS7: dbg("%s - data bits = 7", __FUNCTION__); break; default: case CS8: dbg("%s - data bits = 8", __FUNCTION__); break; } /* determine the parity */ if (cflag & PARENB) if (cflag & PARODD) dbg("%s - parity = odd", __FUNCTION__); else dbg("%s - parity = even", __FUNCTION__); else dbg("%s - parity = none", __FUNCTION__); /* figure out the stop bits requested */ if (cflag & CSTOPB) dbg("%s - stop bits = 2", __FUNCTION__); else dbg("%s - stop bits = 1", __FUNCTION__); /* figure out the flow control settings */ if (cflag & CRTSCTS) dbg("%s - RTS/CTS is enabled", __FUNCTION__); else dbg("%s - RTS/CTS is disabled", __FUNCTION__); /* determine software flow control */ if (I_IXOFF(port->tty)) dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty)); else dbg("%s - XON/XOFF is disabled", __FUNCTION__); /* get the baud rate wanted */ dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty)); return; } static int __init visor_init (void) { int i, retval; /* Only if parameters were passed to us */ if ((vendor>0) && (product>0)) { struct usb_device_id usb_dev_temp[]= {{USB_DEVICE(vendor, product), .driver_info = (kernel_ulong_t)&palm_os_4_probe }}; /* Find the last entry in id_table */ for (i=0; ; i++) { if (id_table[i].idVendor==0) { id_table[i] = usb_dev_temp[0]; break; } } /* Find the last entry in id_table_combined */ for (i=0; ; i++) { if (id_table_combined[i].idVendor==0) { id_table_combined[i] = usb_dev_temp[0]; break; } } info("Untested USB device specified at time of module insertion"); info("Warning: This is not guaranteed to work"); info("Using a newer kernel is preferred to this method"); info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x", vendor, product); } retval = usb_serial_register(&handspring_device); if (retval) goto failed_handspring_register; retval = usb_serial_register(&clie_3_5_device); if (retval) goto failed_clie_3_5_register; retval = usb_serial_register(&clie_5_device); if (retval) goto failed_clie_5_register; retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; info(DRIVER_DESC " " DRIVER_VERSION); return 0; failed_usb_register: usb_serial_deregister(&clie_5_device); failed_clie_5_register: usb_serial_deregister(&clie_3_5_device); failed_clie_3_5_register: usb_serial_deregister(&handspring_device); failed_handspring_register: return retval; } static void __exit visor_exit (void) { usb_deregister (&visor_driver); usb_serial_deregister (&handspring_device); usb_serial_deregister (&clie_3_5_device); usb_serial_deregister (&clie_5_device); } module_init(visor_init); module_exit(visor_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(vendor, ushort, 0); MODULE_PARM_DESC(vendor, "User specified vendor ID"); module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified product ID");