/* * USB Skeleton driver - 1.1 * * Copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2. * * * This driver is to be used as a skeleton driver to be able to create a * USB driver quickly. The design of it is based on the usb-serial and * dc2xx drivers. * * Thanks to Oliver Neukum, David Brownell, and Alan Stern for their help * in debugging this driver. * * * History: * * 2003-05-06 - 1.1 - changes due to usb core changes with usb_register_dev() * 2003-02-25 - 1.0 - fix races involving urb->status, unlink_urb(), and * disconnect. Fix transfer amount in read(). Use * macros instead of magic numbers in probe(). Change * size variables to size_t. Show how to eliminate * DMA bounce buffer. * 2002_12_12 - 0.9 - compile fixes and got rid of fixed minor array. * 2002_09_26 - 0.8 - changes due to USB core conversion to struct device * driver. * 2002_02_12 - 0.7 - zero out dev in probe function for devices that do * not have both a bulk in and bulk out endpoint. * Thanks to Holger Waechtler for the fix. * 2001_11_05 - 0.6 - fix minor locking problem in skel_disconnect. * Thanks to Pete Zaitcev for the fix. * 2001_09_04 - 0.5 - fix devfs bug in skel_disconnect. Thanks to wim delvaux * 2001_08_21 - 0.4 - more small bug fixes. * 2001_05_29 - 0.3 - more bug fixes based on review from linux-usb-devel * 2001_05_24 - 0.2 - bug fixes based on review from linux-usb-devel people * 2001_05_01 - 0.1 - first version * */ #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_USB_DEBUG static int debug = 1; #else static int debug; #endif /* Use our own dbg macro */ #undef dbg #define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG __FILE__ ": " format "\n" , ## arg); } while (0) /* Version Information */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com" #define DRIVER_DESC "USB Skeleton Driver" /* Module parameters */ MODULE_PARM(debug, "i"); MODULE_PARM_DESC(debug, "Debug enabled or not"); /* Define these values to match your devices */ #define USB_SKEL_VENDOR_ID 0xfff0 #define USB_SKEL_PRODUCT_ID 0xfff0 /* table of devices that work with this driver */ static struct usb_device_id skel_table [] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, /* "Gadget Zero" firmware runs under Linux */ { USB_DEVICE(0x0525, 0xa4a0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, skel_table); /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 /* Structure to hold all of our device specific stuff */ struct usb_skel { struct usb_device * udev; /* save off the usb device pointer */ struct usb_interface * interface; /* the interface for this device */ unsigned char minor; /* the starting minor number for this device */ unsigned char num_ports; /* the number of ports this device has */ char num_interrupt_in; /* number of interrupt in endpoints we have */ char num_bulk_in; /* number of bulk in endpoints we have */ char num_bulk_out; /* number of bulk out endpoints we have */ unsigned char * bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ unsigned char * bulk_out_buffer; /* the buffer to send data */ size_t bulk_out_size; /* the size of the send buffer */ struct urb * write_urb; /* the urb used to send data */ __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ atomic_t write_busy; /* true iff write urb is busy */ struct completion write_finished; /* wait for the write to finish */ int open; /* if the port is open or not */ int present; /* if the device is not disconnected */ struct semaphore sem; /* locks this structure */ }; /* prevent races between open() and disconnect() */ static DECLARE_MUTEX (disconnect_sem); /* local function prototypes */ static ssize_t skel_read (struct file *file, char *buffer, size_t count, loff_t *ppos); static ssize_t skel_write (struct file *file, const char *buffer, size_t count, loff_t *ppos); static int skel_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); static int skel_open (struct inode *inode, struct file *file); static int skel_release (struct inode *inode, struct file *file); static int skel_probe (struct usb_interface *interface, const struct usb_device_id *id); static void skel_disconnect (struct usb_interface *interface); static void skel_write_bulk_callback (struct urb *urb, struct pt_regs *regs); /* * File operations needed when we register this driver. * This assumes that this driver NEEDS file operations, * of course, which means that the driver is expected * to have a node in the /dev directory. If the USB * device were for a network interface then the driver * would use "struct net_driver" instead, and a serial * device would use "struct tty_driver". */ static struct file_operations skel_fops = { /* * The owner field is part of the module-locking * mechanism. The idea is that the kernel knows * which module to increment the use-counter of * BEFORE it calls the device's open() function. * This also means that the kernel can decrement * the use-counter again before calling release() * or should the open() function fail. */ .owner = THIS_MODULE, .read = skel_read, .write = skel_write, .ioctl = skel_ioctl, .open = skel_open, .release = skel_release, }; /* * usb class driver info in order to get a minor number from the usb core, * and to have the device registered with devfs and the driver core */ static struct usb_class_driver skel_class = { .name = "usb/skel%d", .fops = &skel_fops, .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = USB_SKEL_MINOR_BASE, }; /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver skel_driver = { .owner = THIS_MODULE, .name = "skeleton", .probe = skel_probe, .disconnect = skel_disconnect, .id_table = skel_table, }; /** * usb_skel_debug_data */ static inline void usb_skel_debug_data (const char *function, int size, const unsigned char *data) { int i; if (!debug) return; printk (KERN_DEBUG __FILE__": %s - length = %d, data = ", function, size); for (i = 0; i < size; ++i) { printk ("%.2x ", data[i]); } printk ("\n"); } /** * skel_delete */ static inline void skel_delete (struct usb_skel *dev) { kfree (dev->bulk_in_buffer); usb_buffer_free (dev->udev, dev->bulk_out_size, dev->bulk_out_buffer, dev->write_urb->transfer_dma); usb_free_urb (dev->write_urb); kfree (dev); } /** * skel_open */ static int skel_open (struct inode *inode, struct file *file) { struct usb_skel *dev = NULL; struct usb_interface *interface; int subminor; int retval = 0; dbg("%s", __FUNCTION__); subminor = iminor(inode); /* prevent disconnects */ down (&disconnect_sem); interface = usb_find_interface (&skel_driver, subminor); if (!interface) { err ("%s - error, can't find device for minor %d", __FUNCTION__, subminor); retval = -ENODEV; goto exit_no_device; } dev = usb_get_intfdata(interface); if (!dev) { retval = -ENODEV; goto exit_no_device; } /* lock this device */ down (&dev->sem); /* increment our usage count for the driver */ ++dev->open; /* save our object in the file's private structure */ file->private_data = dev; /* unlock this device */ up (&dev->sem); exit_no_device: up (&disconnect_sem); return retval; } /** * skel_release */ static int skel_release (struct inode *inode, struct file *file) { struct usb_skel *dev; int retval = 0; dev = (struct usb_skel *)file->private_data; if (dev == NULL) { dbg ("%s - object is NULL", __FUNCTION__); return -ENODEV; } dbg("%s - minor %d", __FUNCTION__, dev->minor); /* lock our device */ down (&dev->sem); if (dev->open <= 0) { dbg ("%s - device not opened", __FUNCTION__); retval = -ENODEV; goto exit_not_opened; } /* wait for any bulk writes that might be going on to finish up */ if (atomic_read (&dev->write_busy)) wait_for_completion (&dev->write_finished); --dev->open; if (!dev->present && !dev->open) { /* the device was unplugged before the file was released */ up (&dev->sem); skel_delete (dev); return 0; } exit_not_opened: up (&dev->sem); return retval; } /** * skel_read */ static ssize_t skel_read (struct file *file, char *buffer, size_t count, loff_t *ppos) { struct usb_skel *dev; int retval = 0; dev = (struct usb_skel *)file->private_data; dbg("%s - minor %d, count = %d", __FUNCTION__, dev->minor, count); /* lock this object */ down (&dev->sem); /* verify that the device wasn't unplugged */ if (!dev->present) { up (&dev->sem); return -ENODEV; } /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg (dev->udev, usb_rcvbulkpipe (dev->udev, dev->bulk_in_endpointAddr), dev->bulk_in_buffer, min (dev->bulk_in_size, count), &count, HZ*10); /* if the read was successful, copy the data to userspace */ if (!retval) { if (copy_to_user (buffer, dev->bulk_in_buffer, count)) retval = -EFAULT; else retval = count; } /* unlock the device */ up (&dev->sem); return retval; } /** * skel_write * * A device driver has to decide how to report I/O errors back to the * user. The safest course is to wait for the transfer to finish before * returning so that any errors will be reported reliably. skel_read() * works like this. But waiting for I/O is slow, so many drivers only * check for errors during I/O initiation and do not report problems * that occur during the actual transfer. That's what we will do here. * * A driver concerned with maximum I/O throughput would use double- * buffering: Two urbs would be devoted to write transfers, so that * one urb could always be active while the other was waiting for the * user to send more data. */ static ssize_t skel_write (struct file *file, const char *buffer, size_t count, loff_t *ppos) { struct usb_skel *dev; ssize_t bytes_written = 0; int retval = 0; dev = (struct usb_skel *)file->private_data; dbg("%s - minor %d, count = %d", __FUNCTION__, dev->minor, count); /* lock this object */ down (&dev->sem); /* verify that the device wasn't unplugged */ if (!dev->present) { retval = -ENODEV; goto exit; } /* verify that we actually have some data to write */ if (count == 0) { dbg("%s - write request of 0 bytes", __FUNCTION__); goto exit; } /* wait for a previous write to finish up; we don't use a timeout * and so a nonresponsive device can delay us indefinitely. */ if (atomic_read (&dev->write_busy)) wait_for_completion (&dev->write_finished); /* we can only write as much as our buffer will hold */ bytes_written = min (dev->bulk_out_size, count); /* copy the data from userspace into our transfer buffer; * this is the only copy required. */ if (copy_from_user(dev->write_urb->transfer_buffer, buffer, bytes_written)) { retval = -EFAULT; goto exit; } usb_skel_debug_data (__FUNCTION__, bytes_written, dev->write_urb->transfer_buffer); /* this urb was already set up, except for this write size */ dev->write_urb->transfer_buffer_length = bytes_written; /* send the data out the bulk port */ /* a character device write uses GFP_KERNEL, unless a spinlock is held */ init_completion (&dev->write_finished); atomic_set (&dev->write_busy, 1); retval = usb_submit_urb(dev->write_urb, GFP_KERNEL); if (retval) { atomic_set (&dev->write_busy, 0); err("%s - failed submitting write urb, error %d", __FUNCTION__, retval); } else { retval = bytes_written; } exit: /* unlock the device */ up (&dev->sem); return retval; } /** * skel_ioctl */ static int skel_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct usb_skel *dev; dev = (struct usb_skel *)file->private_data; /* lock this object */ down (&dev->sem); /* verify that the device wasn't unplugged */ if (!dev->present) { up (&dev->sem); return -ENODEV; } dbg("%s - minor %d, cmd 0x%.4x, arg %ld", __FUNCTION__, dev->minor, cmd, arg); /* fill in your device specific stuff here */ /* unlock the device */ up (&dev->sem); /* return that we did not understand this ioctl call */ return -ENOTTY; } /** * skel_write_bulk_callback */ static void skel_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { struct usb_skel *dev = (struct usb_skel *)urb->context; dbg("%s - minor %d", __FUNCTION__, dev->minor); /* sync/async unlink faults aren't errors */ if (urb->status && !(urb->status == -ENOENT || urb->status == -ECONNRESET)) { dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); } /* notify anyone waiting that the write has finished */ atomic_set (&dev->write_busy, 0); complete (&dev->write_finished); } /** * skel_probe * * Called by the usb core when a new device is connected that it thinks * this driver might be interested in. */ static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); struct usb_skel *dev = NULL; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; size_t buffer_size; int i; int retval = -ENOMEM; /* See if the device offered us matches what we can accept */ if ((udev->descriptor.idVendor != USB_SKEL_VENDOR_ID) || (udev->descriptor.idProduct != USB_SKEL_PRODUCT_ID)) { return -ENODEV; } /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct usb_skel), GFP_KERNEL); if (dev == NULL) { err ("Out of memory"); return -ENOMEM; } memset (dev, 0x00, sizeof (*dev)); init_MUTEX (&dev->sem); dev->udev = udev; dev->interface = interface; /* set up the endpoint information */ /* check out the endpoints */ /* use only the first bulk-in and bulk-out endpoints */ iface_desc = &interface->altsetting[0]; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if (!dev->bulk_in_endpointAddr && (endpoint->bEndpointAddress & USB_DIR_IN) && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) { /* we found a bulk in endpoint */ buffer_size = endpoint->wMaxPacketSize; dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL); if (!dev->bulk_in_buffer) { err("Couldn't allocate bulk_in_buffer"); goto error; } } if (!dev->bulk_out_endpointAddr && !(endpoint->bEndpointAddress & USB_DIR_IN) && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) { /* we found a bulk out endpoint */ /* a probe() may sleep and has no restrictions on memory allocations */ dev->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->write_urb) { err("No free urbs available"); goto error; } dev->bulk_out_endpointAddr = endpoint->bEndpointAddress; /* on some platforms using this kind of buffer alloc * call eliminates a dma "bounce buffer". * * NOTE: you'd normally want i/o buffers that hold * more than one packet, so that i/o delays between * packets don't hurt throughput. */ buffer_size = endpoint->wMaxPacketSize; dev->bulk_out_size = buffer_size; dev->write_urb->transfer_flags = (URB_NO_TRANSFER_DMA_MAP | URB_ASYNC_UNLINK); dev->bulk_out_buffer = usb_buffer_alloc (udev, buffer_size, GFP_KERNEL, &dev->write_urb->transfer_dma); if (!dev->bulk_out_buffer) { err("Couldn't allocate bulk_out_buffer"); goto error; } usb_fill_bulk_urb(dev->write_urb, udev, usb_sndbulkpipe(udev, endpoint->bEndpointAddress), dev->bulk_out_buffer, buffer_size, skel_write_bulk_callback, dev); } } if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) { err("Couldn't find both bulk-in and bulk-out endpoints"); goto error; } /* allow device read, write and ioctl */ dev->present = 1; /* we can register the device now, as it is ready */ usb_set_intfdata (interface, dev); retval = usb_register_dev (interface, &skel_class); if (retval) { /* something prevented us from registering this driver */ err ("Not able to get a minor for this device."); usb_set_intfdata (interface, NULL); goto error; } dev->minor = interface->minor; /* let the user know what node this device is now attached to */ info ("USB Skeleton device now attached to USBSkel-%d", dev->minor); return 0; error: skel_delete (dev); return retval; } /** * skel_disconnect * * Called by the usb core when the device is removed from the system. * * This routine guarantees that the driver will not submit any more urbs * by clearing dev->udev. It is also supposed to terminate any currently * active urbs. Unfortunately, usb_bulk_msg(), used in skel_read(), does * not provide any way to do this. But at least we can cancel an active * write. */ static void skel_disconnect(struct usb_interface *interface) { struct usb_skel *dev; int minor; /* prevent races with open() */ down (&disconnect_sem); dev = usb_get_intfdata (interface); usb_set_intfdata (interface, NULL); down (&dev->sem); minor = dev->minor; /* give back our minor */ usb_deregister_dev (interface, &skel_class); /* terminate an ongoing write */ if (atomic_read (&dev->write_busy)) { usb_unlink_urb (dev->write_urb); wait_for_completion (&dev->write_finished); } /* prevent device read, write and ioctl */ dev->present = 0; up (&dev->sem); /* if the device is opened, skel_release will clean this up */ if (!dev->open) skel_delete (dev); up (&disconnect_sem); info("USB Skeleton #%d now disconnected", minor); } /** * usb_skel_init */ static int __init usb_skel_init(void) { int result; /* register this driver with the USB subsystem */ result = usb_register(&skel_driver); if (result) { err("usb_register failed. Error number %d", result); return result; } info(DRIVER_DESC " " DRIVER_VERSION); return 0; } /** * usb_skel_exit */ static void __exit usb_skel_exit(void) { /* deregister this driver with the USB subsystem */ usb_deregister(&skel_driver); } module_init (usb_skel_init); module_exit (usb_skel_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");