/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1992-1997,2000-2003 Silicon Graphics, Inc. All Rights Reserved. */ #ifndef _ASM_IA64_SN_KSYS_L1_H #define _ASM_IA64_SN_KSYS_L1_H #include /* L1 Target Addresses */ /* * L1 commands and responses use source/target addresses that are * 32 bits long. These are broken up into multiple bitfields that * specify the type of the target controller (could actually be L2 * L3, not just L1), the rack and bay of the target, and the task * id (L1 functionality is divided into several independent "tasks" * that can each receive command requests and transmit responses) */ #define L1_ADDR_TYPE_L1 0x00 /* L1 system controller */ #define L1_ADDR_TYPE_L2 0x01 /* L2 system controller */ #define L1_ADDR_TYPE_L3 0x02 /* L3 system controller */ #define L1_ADDR_TYPE_CBRICK 0x03 /* attached C brick */ #define L1_ADDR_TYPE_IOBRICK 0x04 /* attached I/O brick */ #define L1_ADDR_TASK_SHFT 0 #define L1_ADDR_TASK_MASK 0x0000001F #define L1_ADDR_TASK_INVALID 0x00 /* invalid task */ #define L1_ADDR_TASK_IROUTER 0x01 /* iRouter */ #define L1_ADDR_TASK_SYS_MGMT 0x02 /* system management port */ #define L1_ADDR_TASK_CMD 0x03 /* command interpreter */ #define L1_ADDR_TASK_ENV 0x04 /* environmental monitor */ #define L1_ADDR_TASK_BEDROCK 0x05 /* bedrock */ #define L1_ADDR_TASK_GENERAL 0x06 /* general requests */ /* response argument types */ #define L1_ARG_INT 0x00 /* 4-byte integer (big-endian) */ #define L1_ARG_ASCII 0x01 /* null-terminated ASCII string */ #define L1_ARG_UNKNOWN 0x80 /* unknown data type. The low * 7 bits will contain the data * length. */ /* response codes */ #define L1_RESP_OK 0 /* no problems encountered */ #define L1_RESP_IROUTER (- 1) /* iRouter error */ #define L1_RESP_ARGC (-100) /* arg count mismatch */ #define L1_RESP_REQC (-101) /* bad request code */ #define L1_RESP_NAVAIL (-104) /* requested data not available */ #define L1_RESP_ARGVAL (-105) /* arg value out of range */ #define L1_RESP_INVAL (-107) /* requested data invalid */ /* L1 general requests */ /* request codes */ #define L1_REQ_RDBG 0x0001 /* read debug switches */ #define L1_REQ_RRACK 0x0002 /* read brick rack & bay */ #define L1_REQ_RRBT 0x0003 /* read brick rack, bay & type */ #define L1_REQ_SER_NUM 0x0004 /* read brick serial number */ #define L1_REQ_FW_REV 0x0005 /* read L1 firmware revision */ #define L1_REQ_EEPROM 0x0006 /* read EEPROM info */ #define L1_REQ_EEPROM_FMT 0x0007 /* get EEPROM data format & size */ #define L1_REQ_SYS_SERIAL 0x0008 /* read system serial number */ #define L1_REQ_PARTITION_GET 0x0009 /* read partition id */ #define L1_REQ_PORTSPEED 0x000a /* get ioport speed */ #define L1_REQ_CONS_SUBCH 0x1002 /* select this node's console subchannel */ #define L1_REQ_CONS_NODE 0x1003 /* volunteer to be the master (console-hosting) node */ #define L1_REQ_DISP1 0x1004 /* write line 1 of L1 display */ #define L1_REQ_DISP2 0x1005 /* write line 2 of L1 display */ #define L1_REQ_PARTITION_SET 0x1006 /* set partition id */ #define L1_REQ_EVENT_SUBCH 0x1007 /* set the subchannel for system controller event transmission */ #define L1_REQ_RESET 0x2000 /* request a full system reset */ #define L1_REQ_PCI_UP 0x2001 /* power up pci slot or bus */ #define L1_REQ_PCI_DOWN 0x2002 /* power down pci slot or bus */ #define L1_REQ_PCI_RESET 0x2003 /* reset pci bus or slot */ /* L1 command interpreter requests */ /* request codes */ #define L1_REQ_EXEC_CMD 0x0000 /* interpret and execute an ASCII command string */ /* brick type response codes */ #define L1_BRICKTYPE_PX 0x23 /* # */ #define L1_BRICKTYPE_PE 0x25 /* % */ #define L1_BRICKTYPE_N_p0 0x26 /* & */ #define L1_BRICKTYPE_IP45 0x34 /* 4 */ #define L1_BRICKTYPE_IP41 0x35 /* 5 */ #define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */ #define L1_BRICKTYPE_IX 0x3d /* = */ #define L1_BRICKTYPE_IP34 0x61 /* a */ #define L1_BRICKTYPE_C 0x63 /* c */ #define L1_BRICKTYPE_I 0x69 /* i */ #define L1_BRICKTYPE_N 0x6e /* n */ #define L1_BRICKTYPE_OPUS 0x6f /* o */ #define L1_BRICKTYPE_P 0x70 /* p */ #define L1_BRICKTYPE_R 0x72 /* r */ #define L1_BRICKTYPE_CHI_CG 0x76 /* v */ #define L1_BRICKTYPE_X 0x78 /* x */ #define L1_BRICKTYPE_X2 0x79 /* y */ /* EEPROM codes (for the "read EEPROM" request) */ /* c brick */ #define L1_EEP_NODE 0x00 /* node board */ #define L1_EEP_PIMM0 0x01 #define L1_EEP_PIMM(x) (L1_EEP_PIMM0+(x)) #define L1_EEP_DIMM0 0x03 #define L1_EEP_DIMM(x) (L1_EEP_DIMM0+(x)) /* other brick types */ #define L1_EEP_POWER 0x00 /* power board */ #define L1_EEP_LOGIC 0x01 /* logic board */ /* info area types */ #define L1_EEP_CHASSIS 1 /* chassis info area */ #define L1_EEP_BOARD 2 /* board info area */ #define L1_EEP_IUSE 3 /* internal use area */ #define L1_EEP_SPD 4 /* serial presence detect record */ #define L1_DISPLAY_LINE_LENGTH 12 /* L1 display characters/line */ #ifdef L1_DISP_2LINES #define L1_DISPLAY_LINES 2 /* number of L1 display lines */ #else #define L1_DISPLAY_LINES 1 /* number of L1 display lines available * to system software */ #endif int elsc_display_line(nasid_t nasid, char *line, int lnum); int iobrick_rack_bay_type_get( nasid_t nasid, unsigned int *rack, unsigned int *bay, unsigned int *brick_type ); int iomoduleid_get( nasid_t nasid ); #endif /* _ASM_IA64_SN_KSYS_L1_H */