#ifndef _PARISC_PDC_H #define _PARISC_PDC_H #include /* * PDC return values ... * All PDC calls return a subset of these errors. */ #define PDC_WARN 3 /* Call completed with a warning */ #define PDC_REQ_ERR_1 2 /* See above */ #define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ #define PDC_OK 0 /* Call completed successfully */ #define PDC_BAD_PROC -1 /* Called non-existent procedure*/ #define PDC_BAD_OPTION -2 /* Called with non-existent option */ #define PDC_ERROR -3 /* Call could not complete without an error */ #define PDC_NE_MOD -5 /* Module not found */ #define PDC_NE_CELL_MOD -7 /* Cell module not found */ #define PDC_INVALID_ARG -10 /* Called with an invalid argument */ #define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ #define PDC_NOT_NARROW -17 /* Narrow mode not supported */ /* * PDC entry points... */ #define PDC_POW_FAIL 1 /* perform a power-fail */ #define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ #define PDC_CHASSIS 2 /* PDC-chassis functions */ #define PDC_CHASSIS_DISP 0 /* update chassis display */ #define PDC_CHASSIS_WARN 1 /* return chassis warnings */ #define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ #define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ #define PDC_PIM 3 /* Get PIM data */ #define PDC_PIM_HPMC 0 /* Transfer HPMC data */ #define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ #define PDC_PIM_LPMC 2 /* Transfer HPMC data */ #define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ #define PDC_PIM_TOC 4 /* Transfer TOC data */ #define PDC_MODEL 4 /* PDC model information call */ #define PDC_MODEL_INFO 0 /* returns information */ #define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ #define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ #define PDC_MODEL_SYSMODEL 3 /* return system model info */ #define PDC_MODEL_ENSPEC 4 /* enable specific option */ #define PDC_MODEL_DISPEC 5 /* disable specific option */ #define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ #define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ #define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ #define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ #define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ #define PA90_INSTRUCTION_SET 0x8 #define PDC_CACHE 5 /* return/set cache (& TLB) info*/ #define PDC_CACHE_INFO 0 /* returns information */ #define PDC_CACHE_SET_COH 1 /* set coherence state */ #define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ #define PDC_HPA 6 /* return HPA of processor */ #define PDC_HPA_PROCESSOR 0 #define PDC_HPA_MODULES 1 #define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ #define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ #define PDC_IODC 8 /* talk to IODC */ #define PDC_IODC_READ 0 /* read IODC entry point */ /* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ #define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ /* 1, 2 obsolete - HVERSION dependent*/ #define PDC_IODC_RI_INIT 3 /* Initialize module */ #define PDC_IODC_RI_IO 4 /* Module input/output */ #define PDC_IODC_RI_SPA 5 /* Module input/output */ #define PDC_IODC_RI_CONFIG 6 /* Module input/output */ /* 7 obsolete - HVERSION dependent */ #define PDC_IODC_RI_TEST 8 /* Module input/output */ #define PDC_IODC_RI_TLB 9 /* Module input/output */ #define PDC_IODC_NINIT 2 /* non-destructive init */ #define PDC_IODC_DINIT 3 /* destructive init */ #define PDC_IODC_MEMERR 4 /* check for memory errors */ #define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ #define PDC_IODC_BUS_ERROR -4 /* bus error return value */ #define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ #define PDC_IODC_COUNT -6 /* count is too small */ #define PDC_TOD 9 /* time-of-day clock (TOD) */ #define PDC_TOD_READ 0 /* read TOD */ #define PDC_TOD_WRITE 1 /* write TOD */ #define PDC_TOD_ITIMER 2 /* calibrate Interval Timer (CR16) */ #define PDC_STABLE 10 /* stable storage (sprockets) */ #define PDC_STABLE_READ 0 #define PDC_STABLE_WRITE 1 #define PDC_STABLE_RETURN_SIZE 2 #define PDC_STABLE_VERIFY_CONTENTS 3 #define PDC_STABLE_INITIALIZE 4 #define PDC_NVOLATILE 11 /* often not implemented */ #define PDC_ADD_VALID 12 /* Memory validation PDC call */ #define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ #define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ #define PDC_PROC 16 /* (sprockets) */ #define PDC_CONFIG 16 /* (sprockets) */ #define PDC_CONFIG_DECONFIG 0 #define PDC_CONFIG_DRECONFIG 1 #define PDC_CONFIG_DRETURN_CONFIG 2 #define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ #define PDC_BTLB_INFO 0 /* returns parameter */ #define PDC_BTLB_INSERT 1 /* insert BTLB entry */ #define PDC_BTLB_PURGE 2 /* purge BTLB entries */ #define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ #define PDC_TLB 19 /* manage hardware TLB miss handling */ #define PDC_TLB_INFO 0 /* returns parameter */ #define PDC_TLB_SETUP 1 /* set up miss handling */ #define PDC_MEM 20 /* Manage memory */ #define PDC_MEM_MEMINFO 0 #define PDC_MEM_ADD_PAGE 1 #define PDC_MEM_CLEAR_PDT 2 #define PDC_MEM_READ_PDT 3 #define PDC_MEM_RESET_CLEAR 4 #define PDC_MEM_GOODMEM 5 #define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ #define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 #define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 #define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ #define PDC_MEM_RET_DUPLICATE_ENTRY 4 #define PDC_MEM_RET_BUF_SIZE_SMALL 1 #define PDC_MEM_RET_PDT_FULL -11 #define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL #ifndef __ASSEMBLY__ typedef struct { unsigned long long baseAddr; unsigned int pages; unsigned int reserved; } MemAddrTable_t; #endif #define PDC_PSW 21 /* Get/Set default System Mask */ #define PDC_PSW_MASK 0 /* Return mask */ #define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ #define PDC_PSW_SET_DEFAULTS 2 /* Set default */ #define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ #define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ #define PDC_SYSTEM_MAP 22 /* find system modules */ #define PDC_FIND_MODULE 0 #define PDC_FIND_ADDRESS 1 #define PDC_TRANSLATE_PATH 2 #define PDC_SOFT_POWER 23 /* soft power switch */ #define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ #define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ /* HVERSION dependent */ /* The PDC_MEM_MAP calls */ #define PDC_MEM_MAP 128 /* on s700: return page info */ #define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ #define PDC_EEPROM 129 /* EEPROM access */ #define PDC_EEPROM_READ_WORD 0 #define PDC_EEPROM_WRITE_WORD 1 #define PDC_EEPROM_READ_BYTE 2 #define PDC_EEPROM_WRITE_BYTE 3 #define PDC_EEPROM_EEPROM_PASSWORD -1000 #define PDC_NVM 130 /* NVM (non-volatile memory) access */ #define PDC_NVM_READ_WORD 0 #define PDC_NVM_WRITE_WORD 1 #define PDC_NVM_READ_BYTE 2 #define PDC_NVM_WRITE_BYTE 3 #define PDC_SEED_ERROR 132 /* (sprockets) */ #define PDC_IO 135 /* log error info, reset IO system */ #define PDC_IO_READ_AND_CLEAR_ERRORS 0 #define PDC_IO_RESET 1 #define PDC_IO_RESET_DEVICES 2 /* sets bits 6&7 (little endian) of the HcControl Register */ #define PDC_IO_USB_SUSPEND 0xC000000000000000 #define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ #define PDC_IO_NO_SUSPEND -6 /* return value */ #define PDC_BROADCAST_RESET 136 /* reset all processors */ #define PDC_DO_RESET 0 /* option: perform a broadcast reset */ #define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ #define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ #define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ #define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ #define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ #define PDC_LAN_STATION_ID_SIZE 6 #define PDC_CHECK_RANGES 139 /* (sprockets) */ #define PDC_NV_SECTIONS 141 /* (sprockets) */ #define PDC_PERFORMANCE 142 /* performance monitoring */ #define PDC_SYSTEM_INFO 143 /* system information */ #define PDC_SYSINFO_RETURN_INFO_SIZE 0 #define PDC_SYSINFO_RRETURN_SYS_INFO 1 #define PDC_SYSINFO_RRETURN_ERRORS 2 #define PDC_SYSINFO_RRETURN_WARNINGS 3 #define PDC_SYSINFO_RETURN_REVISIONS 4 #define PDC_SYSINFO_RRETURN_DIAGNOSE 5 #define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 #define PDC_RDR 144 /* (sprockets) */ #define PDC_RDR_READ_BUFFER 0 #define PDC_RDR_READ_SINGLE 1 #define PDC_RDR_WRITE_SINGLE 2 #define PDC_INTRIGUE 145 /* (sprockets) */ #define PDC_INTRIGUE_WRITE_BUFFER 0 #define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 #define PDC_INTRIGUE_START_CPU_COUNTERS 2 #define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 #define PDC_STI 146 /* STI access */ /* same as PDC_PCI_XXX values (see below) */ /* Legacy PDC definitions for same stuff */ #define PDC_PCI_INDEX 147 #define PDC_PCI_INTERFACE_INFO 0 #define PDC_PCI_SLOT_INFO 1 #define PDC_PCI_INFLIGHT_BYTES 2 #define PDC_PCI_READ_CONFIG 3 #define PDC_PCI_WRITE_CONFIG 4 #define PDC_PCI_READ_PCI_IO 5 #define PDC_PCI_WRITE_PCI_IO 6 #define PDC_PCI_READ_CONFIG_DELAY 7 #define PDC_PCI_UPDATE_CONFIG_DELAY 8 #define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 #define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 #define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 #define PDC_PCI_PCI_RESERVED 12 #define PDC_PCI_PCI_INT_ROUTE_SIZE 13 #define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE #define PDC_PCI_PCI_INT_ROUTE 14 #define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE #define PDC_PCI_READ_MON_TYPE 15 #define PDC_PCI_WRITE_MON_TYPE 16 /* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ #define PDC_INITIATOR 163 #define PDC_GET_INITIATOR 0 #define PDC_SET_INITIATOR 1 #define PDC_DELETE_INITIATOR 2 #define PDC_RETURN_TABLE_SIZE 3 #define PDC_RETURN_TABLE 4 #define PDC_LINK 165 /* (sprockets) */ #define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ #define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ /* constants for OS (NVM...) */ #define OS_ID_NONE 0 /* Undefined OS ID */ #define OS_ID_HPUX 1 /* HP-UX OS */ #define OS_ID_LINUX OS_ID_HPUX /* just use the same value as hpux */ #define OS_ID_MPEXL 2 /* MPE XL OS */ #define OS_ID_OSF 3 /* OSF OS */ #define OS_ID_HPRT 4 /* HP-RT OS */ #define OS_ID_NOVEL 5 /* NOVELL OS */ #define OS_ID_NT 6 /* NT OS */ /* constants for PDC_CHASSIS */ #define OSTAT_OFF 0 #define OSTAT_FLT 1 #define OSTAT_TEST 2 #define OSTAT_INIT 3 #define OSTAT_SHUT 4 #define OSTAT_WARN 5 #define OSTAT_RUN 6 #define OSTAT_ON 7 #ifdef __LP64__ /* PDC PAT CELL */ #define PDC_PAT_CELL 64L /* Interface for gaining and * manipulating cell state within PD */ #define PDC_PAT_CELL_GET_NUMBER 0L /* Return Cell number */ #define PDC_PAT_CELL_GET_INFO 1L /* Returns info about Cell */ #define PDC_PAT_CELL_MODULE 2L /* Returns info about Module */ #define PDC_PAT_CELL_SET_ATTENTION 9L /* Set Cell Attention indicator */ #define PDC_PAT_CELL_NUMBER_TO_LOC 10L /* Cell Number -> Location */ #define PDC_PAT_CELL_WALK_FABRIC 11L /* Walk the Fabric */ #define PDC_PAT_CELL_GET_RDT_SIZE 12L /* Return Route Distance Table Sizes */ #define PDC_PAT_CELL_GET_RDT 13L /* Return Route Distance Tables */ #define PDC_PAT_CELL_GET_LOCAL_PDH_SZ 14L /* Read Local PDH Buffer Size*/ #define PDC_PAT_CELL_SET_LOCAL_PDH 15L /* Write Local PDH Buffer */ #define PDC_PAT_CELL_GET_REMOTE_PDH_SZ 16L /* Return Remote PDH Buffer Size */ #define PDC_PAT_CELL_GET_REMOTE_PDH 17L /* Read Remote PDH Buffer */ #define PDC_PAT_CELL_GET_DBG_INFO 128L /* Return DBG Buffer Info */ #define PDC_PAT_CELL_CHANGE_ALIAS 129L /* Change Non-Equivalent Alias Checking */ /* ** Arg to PDC_PAT_CELL_MODULE memaddr[4] ** ** Addresses on the Merced Bus != all Runway Bus addresses. ** This is intended for programming SBA/LBA chips range registers. */ #define IO_VIEW 0UL #define PA_VIEW 1UL /* PDC_PAT_CELL_MODULE entity type values */ #define PAT_ENTITY_CA 0 /* central agent */ #define PAT_ENTITY_PROC 1 /* processor */ #define PAT_ENTITY_MEM 2 /* memory controller */ #define PAT_ENTITY_SBA 3 /* system bus adapter */ #define PAT_ENTITY_LBA 4 /* local bus adapter */ #define PAT_ENTITY_PBC 5 /* processor bus converter */ #define PAT_ENTITY_XBC 6 /* crossbar fabric connect */ #define PAT_ENTITY_RC 7 /* fabric interconnect */ /* PDC_PAT_CELL_MODULE address range type values */ #define PAT_PBNUM 0 /* PCI Bus Number */ #define PAT_LMMIO 1 /* < 4G MMIO Space */ #define PAT_GMMIO 2 /* > 4G MMIO Space */ #define PAT_NPIOP 3 /* Non Postable I/O Port Space */ #define PAT_PIOP 4 /* Postable I/O Port Space */ #define PAT_AHPA 5 /* Additional HPA Space */ #define PAT_UFO 6 /* HPA Space (UFO for Mariposa) */ #define PAT_GNIP 7 /* GNI Reserved Space */ /* PDC PAT CHASSIS LOG */ #define PDC_PAT_CHASSIS_LOG 65L /* Platform logging & forward ** progress functions */ #define PDC_PAT_CHASSIS_WRITE_LOG 0L /* Write Log Entry */ #define PDC_PAT_CHASSIS_READ_LOG 1L /* Read Log Entry */ /* PDC PAT CPU */ #define PDC_PAT_CPU 67L /* Interface to CPU configuration * within the protection domain */ #define PDC_PAT_CPU_INFO 0L /* Return CPU config info */ #define PDC_PAT_CPU_DELETE 1L /* Delete CPU */ #define PDC_PAT_CPU_ADD 2L /* Add CPU */ #define PDC_PAT_CPU_GET_NUMBER 3L /* Return CPU Number */ #define PDC_PAT_CPU_GET_HPA 4L /* Return CPU HPA */ #define PDC_PAT_CPU_STOP 5L /* Stop CPU */ #define PDC_PAT_CPU_RENDEZVOUS 6L /* Rendezvous CPU */ #define PDC_PAT_CPU_GET_CLOCK_INFO 7L /* Return CPU Clock info */ #define PDC_PAT_CPU_GET_RENDEZVOUS_STATE 8L /* Return Rendezvous State */ #define PDC_PAT_CPU_PLUNGE_FABRIC 128L /* Plunge Fabric */ #define PDC_PAT_CPU_UPDATE_CACHE_CLEANSING 129L /* Manipulate Cache * Cleansing Mode */ /* PDC PAT EVENT */ #define PDC_PAT_EVENT 68L /* Interface to Platform Events */ #define PDC_PAT_EVENT_GET_CAPS 0L /* Get Capabilities */ #define PDC_PAT_EVENT_SET_MODE 1L /* Set Notification Mode */ #define PDC_PAT_EVENT_SCAN 2L /* Scan Event */ #define PDC_PAT_EVENT_HANDLE 3L /* Handle Event */ #define PDC_PAT_EVENT_GET_NB_CALL 4L /* Get Non-Blocking call Args*/ /* PDC PAT HPMC */ #define PDC_PAT_HPMC 70L /* Cause processor to go into spin ** loop, and wait for wake up from ** Monarch Processor */ #define PDC_PAT_HPMC_RENDEZ_CPU 0L /* go into spin loop */ #define PDC_PAT_HPMC_SET_PARAMS 1L /* Allows OS to specify intr which PDC * will use to interrupt OS during machine * check rendezvous */ /* parameters for PDC_PAT_HPMC_SET_PARAMS */ #define HPMC_SET_PARAMS_INTR 1L /* Rendezvous Interrupt */ #define HPMC_SET_PARAMS_WAKE 2L /* Wake up processor */ /* PDC PAT IO */ #define PDC_PAT_IO 71L /* On-line services for I/O modules */ #define PDC_PAT_IO_GET_SLOT_STATUS 5L /* Get Slot Status Info */ #define PDC_PAT_IO_GET_LOC_FROM_HARDWARE 6L /* Get Physical Location from */ /* Hardware Path */ #define PDC_PAT_IO_GET_HARDWARE_FROM_LOC 7L /* Get Hardware Path from * Physical Location */ #define PDC_PAT_IO_GET_PCI_CONFIG_FROM_HW 11L /* Get PCI Configuration * Address from Hardware Path */ #define PDC_PAT_IO_GET_HW_FROM_PCI_CONFIG 12L /* Get Hardware Path * from PCI Configuration Address */ #define PDC_PAT_IO_READ_HOST_BRIDGE_INFO 13L /* Read Host Bridge State Info */ #define PDC_PAT_IO_CLEAR_HOST_BRIDGE_INFO 14L /* Clear Host Bridge State Info*/ #define PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE 15L /* Get PCI INT Routing Table * Size */ #define PDC_PAT_IO_GET_PCI_ROUTING_TABLE 16L /* Get PCI INT Routing Table */ #define PDC_PAT_IO_GET_HINT_TABLE_SIZE 17L /* Get Hint Table Size */ #define PDC_PAT_IO_GET_HINT_TABLE 18L /* Get Hint Table */ #define PDC_PAT_IO_PCI_CONFIG_READ 19L /* PCI Config Read */ #define PDC_PAT_IO_PCI_CONFIG_WRITE 20L /* PCI Config Write */ #define PDC_PAT_IO_GET_NUM_IO_SLOTS 21L /* Get Number of I/O Bay Slots in * Cabinet */ #define PDC_PAT_IO_GET_LOC_IO_SLOTS 22L /* Get Physical Location of I/O */ /* Bay Slots in Cabinet */ #define PDC_PAT_IO_BAY_STATUS_INFO 28L /* Get I/O Bay Slot Status Info */ #define PDC_PAT_IO_GET_PROC_VIEW 29L /* Get Processor view of IO address */ #define PDC_PAT_IO_PROG_SBA_DIR_RANGE 30L /* Program directed range */ /* PDC PAT MEM */ #define PDC_PAT_MEM 72L /* Manage memory page deallocation */ #define PDC_PAT_MEM_PD_INFO 0L /* Return PDT info for PD */ #define PDC_PAT_MEM_PD_CLEAR 1L /* Clear PDT for PD */ #define PDC_PAT_MEM_PD_READ 2L /* Read PDT entries for PD */ #define PDC_PAT_MEM_PD_RESET 3L /* Reset clear bit for PD */ #define PDC_PAT_MEM_CELL_INFO 5L /* Return PDT info For Cell */ #define PDC_PAT_MEM_CELL_CLEAR 6L /* Clear PDT For Cell */ #define PDC_PAT_MEM_CELL_READ 7L /* Read PDT entries For Cell */ #define PDC_PAT_MEM_CELL_RESET 8L /* Reset clear bit For Cell */ #define PDC_PAT_MEM_SETGM 9L /* Set Golden Memory value */ #define PDC_PAT_MEM_ADD_PAGE 10L /* ADDs a page to the cell */ #define PDC_PAT_MEM_ADDRESS 11L /* Get Physical Location From*/ /* Memory Address */ #define PDC_PAT_MEM_GET_TXT_SIZE 12L /* Get Formatted Text Size */ #define PDC_PAT_MEM_GET_PD_TXT 13L /* Get PD Formatted Text */ #define PDC_PAT_MEM_GET_CELL_TXT 14L /* Get Cell Formatted Text */ #define PDC_PAT_MEM_RD_STATE_INFO 15L /* Read Mem Module State Info*/ #define PDC_PAT_MEM_CLR_STATE_INFO 16L /*Clear Mem Module State Info*/ #define PDC_PAT_MEM_CLEAN_RANGE 128L /*Clean Mem in specific range*/ #define PDC_PAT_MEM_GET_TBL_SIZE 131L /* Get Memory Table Size */ #define PDC_PAT_MEM_GET_TBL 132L /* Get Memory Table */ /* PDC PAT NVOLATILE */ #define PDC_PAT_NVOLATILE 73L /* Access Non-Volatile Memory*/ #define PDC_PAT_NVOLATILE_READ 0L /* Read Non-Volatile Memory */ #define PDC_PAT_NVOLATILE_WRITE 1L /* Write Non-Volatile Memory */ #define PDC_PAT_NVOLATILE_GET_SIZE 2L /* Return size of NVM */ #define PDC_PAT_NVOLATILE_VERIFY 3L /* Verify contents of NVM */ #define PDC_PAT_NVOLATILE_INIT 4L /* Initialize NVM */ /* PDC PAT PD */ #define PDC_PAT_PD 74L /* Protection Domain Info */ #define PDC_PAT_PD_GET_ADDR_MAP 0L /* Get Address Map */ /* PDC_PAT_PD_GET_ADDR_MAP entry types */ #define PAT_MEMORY_DESCRIPTOR 1 /* PDC_PAT_PD_GET_ADDR_MAP memory types */ #define PAT_MEMTYPE_MEMORY 0 #define PAT_MEMTYPE_FIRMWARE 4 /* PDC_PAT_PD_GET_ADDR_MAP memory usage */ #define PAT_MEMUSE_GENERAL 0 #define PAT_MEMUSE_GI 128 #define PAT_MEMUSE_GNI 129 #endif /* __LP64__ */ #ifndef __ASSEMBLY__ #include extern int pdc_type; /* Values for pdc_type */ #define PDC_TYPE_ILLEGAL -1 #define PDC_TYPE_PAT 0 /* 64-bit PAT-PDC */ #define PDC_TYPE_SYSTEM_MAP 1 /* 32-bit, but supports PDC_SYSTEM_MAP */ #define PDC_TYPE_SNAKE 2 /* Doesn't support SYSTEM_MAP */ #ifdef CONFIG_PARISC64 #define is_pdc_pat() (PDC_TYPE_PAT == pdc_type) #else #define is_pdc_pat() (0) #endif struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */ unsigned long actcnt; /* actual number of bytes returned */ unsigned long maxcnt; /* maximum number of bytes that could be returned */ }; struct pdc_coproc_cfg { /* for PDC_COPROC_CFG */ unsigned long ccr_functional; unsigned long ccr_present; unsigned long revision; unsigned long model; }; struct pdc_model { /* for PDC_MODEL */ unsigned long hversion; unsigned long sversion; unsigned long hw_id; unsigned long boot_id; unsigned long sw_id; unsigned long sw_cap; unsigned long arch_rev; unsigned long pot_key; unsigned long curr_key; }; /* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */ #define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */ #define PDC_MODEL_NVA_MASK (3 << 4) #define PDC_MODEL_NVA_SUPPORTED (0 << 4) #define PDC_MODEL_NVA_SLOW (1 << 4) #define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */ unsigned long #ifdef __LP64__ cc_padW:32, #endif cc_alias:4, /* alias boundaries for virtual addresses */ cc_block: 4, /* to determine most efficient stride */ cc_line : 3, /* maximum amount written back as a result of store (multiple of 16 bytes) */ cc_pad0 : 2, /* reserved */ cc_wt : 1, /* 0 = WT-Dcache, 1 = WB-Dcache */ cc_sh : 2, /* 0 = separate I/D-cache, else shared I/D-cache */ cc_cst : 3, /* 0 = incoherent D-cache, 1=coherent D-cache */ cc_pad1 : 5, /* reserved */ cc_assoc: 8; /* associativity of I/D-cache */ }; struct pdc_tlb_cf { /* for PDC_CACHE (I/D-TLB's) */ unsigned long tc_pad0:12, /* reserved */ #ifdef __LP64__ tc_padW:32, #endif tc_sh : 2, /* 0 = separate I/D-TLB, else shared I/D-TLB */ tc_hv : 1, /* HV */ tc_page : 1, /* 0 = 2K page-size-machine, 1 = 4k page size */ tc_cst : 3, /* 0 = incoherent operations, else coherent operations */ tc_aid : 5, /* ITLB: width of access ids of processor (encoded!) */ tc_pad1 : 8; /* ITLB: width of space-registers (encoded) */ }; struct pdc_cache_info { /* main-PDC_CACHE-structure (caches & TLB's) */ /* I-cache */ unsigned long ic_size; /* size in bytes */ struct pdc_cache_cf ic_conf; /* configuration */ unsigned long ic_base; /* base-addr */ unsigned long ic_stride; unsigned long ic_count; unsigned long ic_loop; /* D-cache */ unsigned long dc_size; /* size in bytes */ struct pdc_cache_cf dc_conf; /* configuration */ unsigned long dc_base; /* base-addr */ unsigned long dc_stride; unsigned long dc_count; unsigned long dc_loop; /* Instruction-TLB */ unsigned long it_size; /* number of entries in I-TLB */ struct pdc_tlb_cf it_conf; /* I-TLB-configuration */ unsigned long it_sp_base; unsigned long it_sp_stride; unsigned long it_sp_count; unsigned long it_off_base; unsigned long it_off_stride; unsigned long it_off_count; unsigned long it_loop; /* data-TLB */ unsigned long dt_size; /* number of entries in D-TLB */ struct pdc_tlb_cf dt_conf; /* D-TLB-configuration */ unsigned long dt_sp_base; unsigned long dt_sp_stride; unsigned long dt_sp_count; unsigned long dt_off_base; unsigned long dt_off_stride; unsigned long dt_off_count; unsigned long dt_loop; }; #if 0 /* If you start using the next struct, you'll have to adjust it to * work with 64-bit firmware I think -PB */ struct pdc_iodc { /* PDC_IODC */ unsigned char hversion_model; unsigned char hversion; unsigned char spa; unsigned char type; unsigned int sversion_rev:4; unsigned int sversion_model:19; unsigned int sversion_opt:8; unsigned char rev; unsigned char dep; unsigned char features; unsigned char pad1; unsigned int checksum:16; unsigned int length:16; unsigned int pad[15]; } __attribute__((aligned(8))) ; #endif #ifndef CONFIG_PA20 /* no BLTBs in pa2.0 processors */ struct pdc_btlb_info_range { __u8 res00; __u8 num_i; __u8 num_d; __u8 num_comb; }; struct pdc_btlb_info { /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */ unsigned int min_size; /* minimum size of BTLB in pages */ unsigned int max_size; /* maximum size of BTLB in pages */ struct pdc_btlb_info_range fixed_range_info; struct pdc_btlb_info_range variable_range_info; }; #endif /* !CONFIG_PA20 */ #ifdef __LP64__ struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */ unsigned long entries_returned; unsigned long entries_total; }; struct pdc_memory_table { /* PDC_MEM/PDC_MEM_TABLE (arguments) */ unsigned long paddr; unsigned int pages; unsigned int reserved; }; #endif /* __LP64__ */ struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */ unsigned long mod_addr; unsigned long mod_pgs; unsigned long add_addrs; }; struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */ unsigned long mod_addr; unsigned long mod_pgs; }; struct hardware_path { char flags; /* see bit definitions below */ char bc[6]; /* Bus Converter routing info to a specific */ /* I/O adaptor (< 0 means none, > 63 resvd) */ char mod; /* fixed field of specified module */ }; /* * Device path specifications used by PDC. */ struct pdc_module_path { struct hardware_path path; unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */ }; #ifndef CONFIG_PA20 /* Only used on some pre-PA2.0 boxes */ struct pdc_memory_map { /* PDC_MEMORY_MAP */ unsigned long hpa; /* mod's register set address */ unsigned long more_pgs; /* number of additional I/O pgs */ }; #endif struct pdc_tod { unsigned long tod_sec; unsigned long tod_usec; }; #ifdef __LP64__ struct pdc_pat_cell_num { unsigned long cell_num; unsigned long cell_loc; }; struct pdc_pat_cpu_num { unsigned long cpu_num; unsigned long cpu_loc; }; struct pdc_pat_pd_addr_map_entry { unsigned char entry_type; /* 1 = Memory Descriptor Entry Type */ unsigned char reserve1[5]; unsigned char memory_type; unsigned char memory_usage; unsigned long paddr; unsigned int pages; /* Length in 4K pages */ unsigned int reserve2; unsigned long cell_map; }; /* FIXME: mod[508] should really be a union of the various mod components */ struct pdc_pat_cell_mod_maddr_block { /* PDC_PAT_CELL_MODULE */ unsigned long cba; /* function 0 configuration space address */ unsigned long mod_info; /* module information */ unsigned long mod_location; /* physical location of the module */ struct hardware_path mod_path; /* hardware path */ unsigned long mod[508]; /* PAT cell module components */ }; typedef struct pdc_pat_cell_mod_maddr_block pdc_pat_cell_mod_maddr_block_t; #endif /* __LP64__ */ /* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */ struct pdc_hpmc_pim_11 { /* PDC_PIM */ __u32 gr[32]; __u32 cr[32]; __u32 sr[8]; __u32 iasq_back; __u32 iaoq_back; __u32 check_type; __u32 cpu_state; __u32 rsvd1; __u32 cache_check; __u32 tlb_check; __u32 bus_check; __u32 assists_check; __u32 rsvd2; __u32 assist_state; __u32 responder_addr; __u32 requestor_addr; __u32 path_info; __u64 fr[32]; }; /* * architected results from PDC_PIM/transfer hpmc on a PA2.0 machine * * Note that PDC_PIM doesn't care whether or not wide mode was enabled * so the results are different on PA1.1 vs. PA2.0 when in narrow mode. * * Note also that there are unarchitected results available, which * are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since * the firmware is probably the best way of printing hversion dependent * data. */ struct pdc_hpmc_pim_20 { /* PDC_PIM */ __u64 gr[32]; __u64 cr[32]; __u64 sr[8]; __u64 iasq_back; __u64 iaoq_back; __u32 check_type; __u32 cpu_state; __u32 cache_check; __u32 tlb_check; __u32 bus_check; __u32 assists_check; __u32 assist_state; __u32 path_info; __u64 responder_addr; __u64 requestor_addr; __u64 fr[32]; }; #endif /* __ASSEMBLY__ */ /* flags of the device_path (see below) */ #define PF_AUTOBOOT 0x80 #define PF_AUTOSEARCH 0x40 #define PF_TIMER 0x0F #ifndef __ASSEMBLY__ struct device_path { /* page 1-69 */ unsigned char flags; /* flags see above! */ unsigned char bc[6]; /* bus converter routing info */ unsigned char mod; unsigned int layers[6];/* device-specific layer-info */ } __attribute__((aligned(8))) ; struct pz_device { struct device_path dp; /* see above */ /* struct iomod *hpa; */ unsigned int hpa; /* HPA base address */ /* char *spa; */ unsigned int spa; /* SPA base address */ /* int (*iodc_io)(struct iomod*, ...); */ unsigned int iodc_io; /* device entry point */ short pad; /* reserved */ unsigned short cl_class;/* see below */ } __attribute__((aligned(8))) ; #endif /* __ASSEMBLY__ */ /* cl_class * page 3-33 of IO-Firmware ARS * IODC ENTRY_INIT(Search first) RET[1] */ #define CL_NULL 0 /* invalid */ #define CL_RANDOM 1 /* random access (as disk) */ #define CL_SEQU 2 /* sequential access (as tape) */ #define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ #define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ #define CL_DISPL 9 /* half-duplex console (display) */ #define CL_FC 10 /* FiberChannel access media */ #if 0 /* FIXME: DEVCLASS_* duplicates CL_* (above). Delete DEVCLASS_*? */ #define DEVCLASS_RANDOM 1 #define DEVCLASS_SEQU 2 #define DEVCLASS_DUPLEX 7 #define DEVCLASS_KEYBD 8 #define DEVCLASS_DISP 9 #endif /* IODC ENTRY_INIT() */ #define ENTRY_INIT_SRCH_FRST 2 #define ENTRY_INIT_SRCH_NEXT 3 #define ENTRY_INIT_MOD_DEV 4 #define ENTRY_INIT_DEV 5 #define ENTRY_INIT_MOD 6 #define ENTRY_INIT_MSG 9 /* IODC ENTRY_IO() */ #define ENTRY_IO_BOOTIN 0 #define ENTRY_IO_BOOTOUT 1 #define ENTRY_IO_CIN 2 #define ENTRY_IO_COUT 3 #define ENTRY_IO_CLOSE 4 #define ENTRY_IO_GETMSG 9 #define ENTRY_IO_BBLOCK_IN 16 #define ENTRY_IO_BBLOCK_OUT 17 /* IODC ENTRY_SPA() */ /* IODC ENTRY_CONFIG() */ /* IODC ENTRY_TEST() */ /* IODC ENTRY_TLB() */ /* DEFINITION OF THE ZERO-PAGE (PAG0) */ /* based on work by Jason Eckhardt (jason@equator.com) */ #ifndef __ASSEMBLY__ #define PAGE0 ((struct zeropage *)__PAGE_OFFSET) struct zeropage { /* [0x000] initialize vectors (VEC) */ unsigned int vec_special; /* must be zero */ /* int (*vec_pow_fail)(void);*/ unsigned int vec_pow_fail; /* power failure handler */ /* int (*vec_toc)(void); */ unsigned int vec_toc; unsigned int vec_toclen; /* int (*vec_rendz)(void); */ unsigned int vec_rendz; int vec_pow_fail_flen; int vec_pad[10]; /* [0x040] reserved processor dependent */ int pad0[112]; /* [0x200] reserved */ int pad1[84]; /* [0x350] memory configuration (MC) */ int memc_cont; /* contiguous mem size (bytes) */ int memc_phsize; /* physical memory size */ int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ unsigned int mem_pdc_hi; /* used for 64-bit */ /* [0x360] various parameters for the boot-CPU */ /* unsigned int *mem_booterr[8]; */ unsigned int mem_booterr[8]; /* ptr to boot errors */ unsigned int mem_free; /* first location, where OS can be loaded */ /* struct iomod *mem_hpa; */ unsigned int mem_hpa; /* HPA of the boot-CPU */ /* int (*mem_pdc)(int, ...); */ unsigned int mem_pdc; /* PDC entry point */ unsigned int mem_10msec; /* number of clock ticks in 10msec */ /* [0x390] initial memory module (IMM) */ /* struct iomod *imm_hpa; */ unsigned int imm_hpa; /* HPA of the IMM */ int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ unsigned int imm_max_mem; /* bytes of mem in IMM */ /* [0x3A0] boot console, display device and keyboard */ struct pz_device mem_cons; /* description of console device */ struct pz_device mem_boot; /* description of boot device */ struct pz_device mem_kbd; /* description of keyboard device */ /* [0x430] reserved */ int pad430[116]; /* [0x600] processor dependent */ __u32 pad600[1]; __u32 proc_sti; /* pointer to STI ROM */ __u32 pad608[126]; }; #endif /* __ASSEMBLY__ */ /* Page Zero constant offsets used by the HPMC handler */ #define BOOT_CONSOLE_HPA_OFFSET 0x3c0 #define BOOT_CONSOLE_SPA_OFFSET 0x3c4 #define BOOT_CONSOLE_PATH_OFFSET 0x3a8 #ifndef __ASSEMBLY__ void pdc_console_init(void); /* in pdc_console.c */ void pdc_console_restart(void); void setup_pdc(void); /* in inventory.c */ /* wrapper-functions from pdc.c */ int pdc_add_valid(unsigned long address); int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len); int pdc_chassis_disp(unsigned long disp); int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info); int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index, void *iodc_data, unsigned int iodc_data_size); int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info, struct pdc_module_path *mod_path, long mod_index); int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, long mod_index, long addr_index); int pdc_model_info(struct pdc_model *model); int pdc_model_sysmodel(char *name); int pdc_model_cpuid(unsigned long *cpu_id); int pdc_model_versions(unsigned long *versions, int id); int pdc_model_capabilities(unsigned long *capabilities); int pdc_cache_info(struct pdc_cache_info *cache); #ifndef CONFIG_PA20 int pdc_btlb_info(struct pdc_btlb_info *btlb); int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path); #endif /* !CONFIG_PA20 */ int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa); int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa); int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl); int pdc_get_initiator(struct hardware_path *hwpath, unsigned char *scsi_id, unsigned long *period, char *width, char *mode); int pdc_tod_read(struct pdc_tod *tod); int pdc_tod_set(unsigned long sec, unsigned long usec); #ifdef __LP64__ int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, struct pdc_memory_table *tbl, unsigned long entries); #endif void set_firmware_width(void); int pdc_do_firm_test_reset(unsigned long ftc_bitmap); int pdc_do_reset(void); int pdc_soft_power_info(unsigned long *power_reg); int pdc_soft_power_button(int sw_control); void pdc_io_reset(void); void pdc_io_reset_devices(void); int pdc_iodc_getc(void); void pdc_iodc_putc(unsigned char c); void pdc_iodc_outc(unsigned char c); void pdc_emergency_unlock(void); int pdc_sti_call(unsigned long func, unsigned long flags, unsigned long inptr, unsigned long outputr, unsigned long glob_cfg); #ifdef __LP64__ int pdc_pat_chassis_send_log(unsigned long status, unsigned long data); int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info); int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, unsigned long view_type, void *mem_addr); int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa); int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num); int pdc_pat_get_irt(void *r_addr, unsigned long cell_num); int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, unsigned long count, unsigned long offset); /******************************************************************** * PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr * ---------------------------------------------------------- * Bit 0 to 51 - conf_base_addr * Bit 52 to 62 - reserved * Bit 63 - endianess bit ********************************************************************/ #define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL) /******************************************************************** * PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info * ---------------------------------------------------- * Bit 0 to 7 - entity type * 0 = central agent, 1 = processor, * 2 = memory controller, 3 = system bus adapter, * 4 = local bus adapter, 5 = processor bus converter, * 6 = crossbar fabric connect, 7 = fabric interconnect, * 8 to 254 reserved, 255 = unknown. * Bit 8 to 15 - DVI * Bit 16 to 23 - IOC functions * Bit 24 to 39 - reserved * Bit 40 to 63 - mod_pages * number of 4K pages a module occupies starting at conf_base_addr ********************************************************************/ #define PAT_GET_ENTITY(value) (((value) >> 56) & 0xffUL) #define PAT_GET_DVI(value) (((value) >> 48) & 0xffUL) #define PAT_GET_IOC(value) (((value) >> 40) & 0xffUL) #define PAT_GET_MOD_PAGES(value)(((value) & 0xffffffUL) #else /* !__LP64__ */ /* No PAT support for 32-bit kernels...sorry */ #define pdc_pat_get_irt_size(num_entries, cell_numn) PDC_BAD_PROC #define pdc_pat_get_irt(r_addr, cell_num) PDC_BAD_PROC #endif /* !__LP64__ */ extern void pdc_init(void); #endif /* __ASSEMBLY__ */ #endif /* _PARISC_PDC_H */