/* * Copyright (c) 2009, 2010, 2011 Nicira Networks. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef OFPROTO_PRIVATE_H #define OFPROTO_PRIVATE_H 1 /* Definitions for use within ofproto. */ #include "ofproto/ofproto.h" #include "classifier.h" #include "list.h" #include "shash.h" #include "timeval.h" /* An OpenFlow switch. * * With few exceptions, ofproto implementations may look at these fields but * should not modify them. */ struct ofproto { const struct ofproto_class *ofproto_class; char *type; /* Datapath type. */ char *name; /* Datapath name. */ struct hmap_node hmap_node; /* In global 'all_ofprotos' hmap. */ /* Settings. */ uint64_t fallback_dpid; /* Datapath ID if no better choice found. */ uint64_t datapath_id; /* Datapath ID. */ char *mfr_desc; /* Manufacturer. */ char *hw_desc; /* Hardware. */ char *sw_desc; /* Software version. */ char *serial_desc; /* Serial number. */ char *dp_desc; /* Datapath description. */ /* Datapath. */ struct netdev_monitor *netdev_monitor; struct hmap ports; /* Contains "struct ofport"s. */ struct shash port_by_name; /* Flow tables. */ struct classifier *tables; /* Each classifier contains "struct rule"s. */ int n_tables; /* OpenFlow connections. */ struct connmgr *connmgr; }; struct ofproto *ofproto_lookup(const char *name); struct ofport *ofproto_get_port(const struct ofproto *, uint16_t ofp_port); /* An OpenFlow port within a "struct ofproto". * * With few exceptions, ofproto implementations may look at these fields but * should not modify them. */ struct ofport { struct ofproto *ofproto; /* The ofproto that contains this port. */ struct hmap_node hmap_node; /* In struct ofproto's "ports" hmap. */ struct netdev *netdev; struct ofp_phy_port opp; uint16_t ofp_port; /* OpenFlow port number. */ }; /* An OpenFlow flow within a "struct ofproto". * * With few exceptions, ofproto implementations may look at these fields but * should not modify them. */ struct rule { struct ofproto *ofproto; /* The ofproto that contains this rule. */ struct cls_rule cr; /* In owning ofproto's classifier. */ ovs_be64 flow_cookie; /* Controller-issued identifier. */ long long int created; /* Creation time. */ uint16_t idle_timeout; /* In seconds from time of last use. */ uint16_t hard_timeout; /* In seconds from time of creation. */ uint8_t table_id; /* Index in ofproto's 'tables' array. */ bool send_flow_removed; /* Send a flow removed message? */ union ofp_action *actions; /* OpenFlow actions. */ int n_actions; /* Number of elements in actions[]. */ }; static inline struct rule * rule_from_cls_rule(const struct cls_rule *cls_rule) { return cls_rule ? CONTAINER_OF(cls_rule, struct rule, cr) : NULL; } void ofproto_rule_expire(struct rule *, uint8_t reason); void ofproto_rule_destroy(struct rule *); /* ofproto class structure, to be defined by each ofproto implementation. * * * Data Structures * =============== * * These functions work primarily with three different kinds of data * structures: * * - "struct ofproto", which represents an OpenFlow switch. * * - "struct ofport", which represents a port within an ofproto. * * - "struct rule", which represents an OpenFlow flow within an ofproto. * * Each of these data structures contains all of the implementation-independent * generic state for the respective concept, called the "base" state. None of * them contains any extra space for ofproto implementations to use. Instead, * each implementation is expected to declare its own data structure that * contains an instance of the generic data structure plus additional * implementation-specific members, called the "derived" state. The * implementation can use casts or (preferably) the CONTAINER_OF macro to * obtain access to derived state given only a pointer to the embedded generic * data structure. * * * Life Cycle * ========== * * Four stylized functions accompany each of these data structures: * * "alloc" "construct" "destruct" "dealloc" * ------------ ---------------- --------------- -------------- * ofproto ->alloc ->construct ->destruct ->dealloc * ofport ->port_alloc ->port_construct ->port_destruct ->port_dealloc * rule ->rule_alloc ->rule_construct ->rule_destruct ->rule_dealloc * * Any instance of a given data structure goes through the following life * cycle: * * 1. The client calls the "alloc" function to obtain raw memory. If "alloc" * fails, skip all the other steps. * * 2. The client initializes all of the data structure's base state. If this * fails, skip to step 7. * * 3. The client calls the "construct" function. The implementation * initializes derived state. It may refer to the already-initialized * base state. If "construct" fails, skip to step 6. * * 4. The data structure is now initialized and in use. * * 5. When the data structure is no longer needed, the client calls the * "destruct" function. The implementation uninitializes derived state. * The base state has not been uninitialized yet, so the implementation * may still refer to it. * * 6. The client uninitializes all of the data structure's base state. * * 7. The client calls the "dealloc" to free the raw memory. The * implementation must not refer to base or derived state in the data * structure, because it has already been uninitialized. * * Each "alloc" function allocates and returns a new instance of the respective * data structure. The "alloc" function is not given any information about the * use of the new data structure, so it cannot perform much initialization. * Its purpose is just to ensure that the new data structure has enough room * for base and derived state. It may return a null pointer if memory is not * available, in which case none of the other functions is called. * * Each "construct" function initializes derived state in its respective data * structure. When "construct" is called, all of the base state has already * been initialized, so the "construct" function may refer to it. The * "construct" function is allowed to fail, in which case the client calls the * "dealloc" function (but not the "destruct" function). * * Each "destruct" function uninitializes and frees derived state in its * respective data structure. When "destruct" is called, the base state has * not yet been uninitialized, so the "destruct" function may refer to it. The * "destruct" function is not allowed to fail. * * Each "dealloc" function frees raw memory that was allocated by the the * "alloc" function. The memory's base and derived members might not have ever * been initialized (but if "construct" returned successfully, then it has been * "destruct"ed already). The "dealloc" function is not allowed to fail. * * * Conventions * =========== * * Most of these functions return 0 if they are successful or a positive error * code on failure. Depending on the function, valid error codes are either * errno values or OpenFlow error codes constructed with ofp_mkerr(). * * Most of these functions are expected to execute synchronously, that is, to * block as necessary to obtain a result. Thus, these functions may return * EAGAIN (or EWOULDBLOCK or EINPROGRESS) only where the function descriptions * explicitly say those errors are a possibility. We may relax this * requirement in the future if and when we encounter performance problems. */ struct ofproto_class { /* ## ----------------- ## */ /* ## Factory Functions ## */ /* ## ----------------- ## */ /* Enumerates the types of all support ofproto types into 'types'. The * caller has already initialized 'types' and other ofproto classes might * already have added names to it. */ void (*enumerate_types)(struct sset *types); /* Enumerates the names of all existing datapath of the specified 'type' * into 'names' 'all_dps'. The caller has already initialized 'names' as * an empty sset. * * 'type' is one of the types enumerated by ->enumerate_types(). * * Returns 0 if successful, otherwise a positive errno value. */ int (*enumerate_names)(const char *type, struct sset *names); /* Deletes the datapath with the specified 'type' and 'name'. The caller * should have closed any open ofproto with this 'type' and 'name'; this * function is allowed to fail if that is not the case. * * 'type' is one of the types enumerated by ->enumerate_types(). * 'name' is one of the names enumerated by ->enumerate_names() for 'type'. * * Returns 0 if successful, otherwise a positive errno value. */ int (*del)(const char *type, const char *name); /* ## --------------------------- ## */ /* ## Top-Level ofproto Functions ## */ /* ## --------------------------- ## */ /* Life-cycle functions for an "ofproto" (see "Life Cycle" above). * * ->construct() should not modify most base members of the ofproto. In * particular, the client will initialize the ofproto's 'ports' member * after construction is complete. * * ->construct() should initialize the base 'n_tables' member to the number * of flow tables supported by the datapath (between 1 and 254, inclusive), * initialize the base 'tables' member with space for one classifier per * table, and initialize each classifier with classifier_init. Each flow * table should be initially empty, so ->construct() should delete flows * from the underlying datapath, if necessary, rather than populating the * tables. * * Only one ofproto instance needs to be supported for any given datapath. * If a datapath is already open as part of one "ofproto", then another * attempt to "construct" the same datapath as part of another ofproto is * allowed to fail with an error. * * ->construct() returns 0 if successful, otherwise a positive errno * value. */ struct ofproto *(*alloc)(void); int (*construct)(struct ofproto *ofproto); void (*destruct)(struct ofproto *ofproto); void (*dealloc)(struct ofproto *ofproto); /* Performs any periodic activity required by 'ofproto'. It should: * * - Call connmgr_send_packet_in() for each received packet that missed * in the OpenFlow flow table or that had a OFPP_CONTROLLER output * action. * * - Call ofproto_rule_expire() for each OpenFlow flow that has reached * its hard_timeout or idle_timeout, to expire the flow. * * Returns 0 if successful, otherwise a positive errno value. The ENODEV * return value specifically means that the datapath underlying 'ofproto' * has been destroyed (externally, e.g. by an admin running ovs-dpctl). */ int (*run)(struct ofproto *ofproto); /* Causes the poll loop to wake up when 'ofproto''s 'run' function needs to * be called, e.g. by calling the timer or fd waiting functions in * poll-loop.h. */ void (*wait)(struct ofproto *ofproto); /* Every "struct rule" in 'ofproto' is about to be deleted, one by one. * This function may prepare for that, for example by clearing state in * advance. It should *not* actually delete any "struct rule"s from * 'ofproto', only prepare for it. * * This function is optional; it's really just for optimization in case * it's cheaper to delete all the flows from your hardware in a single pass * than to do it one by one. */ void (*flush)(struct ofproto *ofproto); /* Helper for the OpenFlow OFPT_FEATURES_REQUEST request. * * The implementation should store true in '*arp_match_ip' if the switch * supports matching IP addresses inside ARP requests and replies, false * otherwise. * * The implementation should store in '*actions' a bitmap of the supported * OpenFlow actions: the bit with value (1 << n) should be set to 1 if the * implementation supports the action with value 'n', and to 0 otherwise. * For example, if the implementation supports the OFPAT_OUTPUT and * OFPAT_ENQUEUE actions, but no others, it would set '*actions' to (1 << * OFPAT_OUTPUT) | (1 << OFPAT_ENQUEUE). Vendor actions are not included * in '*actions'. */ void (*get_features)(struct ofproto *ofproto, bool *arp_match_ip, uint32_t *actions); /* Helper for the OpenFlow OFPST_TABLE statistics request. * * The 'ots' array contains 'ofproto->n_tables' elements. Each element is * initialized as: * * - 'table_id' to the array index. * * - 'name' to "table#" where # is the table ID. * * - 'wildcards' to OVSFW_ALL. * * - 'max_entries' to 1,000,000. * * - 'active_count' to the classifier_count() for the table. * * - 'lookup_count' and 'matched_count' to 0. * * The implementation should update any members in each element for which * it has better values: * * - 'name' to a more meaningful name. * * - 'wildcards' to the set of wildcards actually supported by the table * (if it doesn't support all OpenFlow wildcards). * * - 'max_entries' to the maximum number of flows actually supported by * the hardware. * * - 'lookup_count' to the number of packets looked up in this flow table * so far. * * - 'matched_count' to the number of packets looked up in this flow * table so far that matched one of the flow entries. * * Keep in mind that all of the members of struct ofp_table_stats are in * network byte order. */ void (*get_tables)(struct ofproto *ofproto, struct ofp_table_stats *ots); /* ## ---------------- ## */ /* ## ofport Functions ## */ /* ## ---------------- ## */ /* Life-cycle functions for a "struct ofport" (see "Life Cycle" above). * * ->port_construct() should not modify any base members of the ofport. * * ofports are managed by the base ofproto code. The ofproto * implementation should only create and destroy them in response to calls * to these functions. The base ofproto code will create and destroy * ofports in the following situations: * * - Just after the ->construct() function is called, the base ofproto * iterates over all of the implementation's ports, using * ->port_dump_start() and related functions, and constructs an ofport * for each dumped port. * * - If ->port_poll() reports that a specific port has changed, then the * base ofproto will query that port with ->port_query_by_name() and * construct or destruct ofports as necessary to reflect the updated * set of ports. * * - If ->port_poll() returns ENOBUFS to report an unspecified port set * change, then the base ofproto will iterate over all of the * implementation's ports, in the same way as at ofproto * initialization, and construct and destruct ofports to reflect all of * the changes. * * ->port_construct() returns 0 if successful, otherwise a positive errno * value. */ struct ofport *(*port_alloc)(void); int (*port_construct)(struct ofport *ofport); void (*port_destruct)(struct ofport *ofport); void (*port_dealloc)(struct ofport *ofport); /* Called after 'ofport->netdev' is replaced by a new netdev object. If * the ofproto implementation uses the ofport's netdev internally, then it * should switch to using the new one. The old one has been closed. * * An ofproto implementation that doesn't need to do anything in this * function may use a null pointer. */ void (*port_modified)(struct ofport *ofport); /* Called after an OpenFlow OFPT_PORT_MOD request changes a port's * configuration. 'ofport->opp.config' contains the new configuration. * 'old_config' contains the previous configuration. * * The caller implements OFPPC_PORT_DOWN using netdev functions to turn * NETDEV_UP on and off, so this function doesn't have to do anything for * that bit (and it won't be called if that is the only bit that * changes). */ void (*port_reconfigured)(struct ofport *ofport, ovs_be32 old_config); /* Looks up a port named 'devname' in 'ofproto'. On success, initializes * '*port' appropriately. * * The caller owns the data in 'port' and must free it with * ofproto_port_destroy() when it is no longer needed. */ int (*port_query_by_name)(const struct ofproto *ofproto, const char *devname, struct ofproto_port *port); /* Attempts to add 'netdev' as a port on 'ofproto'. Returns 0 if * successful, otherwise a positive errno value. If successful, sets * '*ofp_portp' to the new port's port number. * * It doesn't matter whether the new port will be returned by a later call * to ->port_poll(); the implementation may do whatever is more * convenient. */ int (*port_add)(struct ofproto *ofproto, struct netdev *netdev, uint16_t *ofp_portp); /* Deletes port number 'ofp_port' from the datapath for 'ofproto'. Returns * 0 if successful, otherwise a positive errno value. * * It doesn't matter whether the new port will be returned by a later call * to ->port_poll(); the implementation may do whatever is more * convenient. */ int (*port_del)(struct ofproto *ofproto, uint16_t ofp_port); /* Attempts to begin dumping the ports in 'ofproto'. On success, returns 0 * and initializes '*statep' with any data needed for iteration. On * failure, returns a positive errno value. */ int (*port_dump_start)(const struct ofproto *ofproto, void **statep); /* Attempts to retrieve another port from 'ofproto' for 'state', which was * initialized by a successful call to the 'port_dump_start' function for * 'ofproto'. On success, stores a new ofproto_port into 'port' and * returns 0. Returns EOF if the end of the port table has been reached, * or a positive errno value on error. This function will not be called * again once it returns nonzero once for a given iteration (but the * 'port_dump_done' function will be called afterward). * * The ofproto provider retains ownership of the data stored in 'port'. It * must remain valid until at least the next call to 'port_dump_next' or * 'port_dump_done' for 'state'. */ int (*port_dump_next)(const struct ofproto *ofproto, void *state, struct ofproto_port *port); /* Releases resources from 'ofproto' for 'state', which was initialized by * a successful call to the 'port_dump_start' function for 'ofproto'. */ int (*port_dump_done)(const struct ofproto *ofproto, void *state); /* Polls for changes in the set of ports in 'ofproto'. If the set of ports * in 'ofproto' has changed, then this function should do one of the * following: * * - Preferably: store the name of the device that was added to or deleted * from 'ofproto' in '*devnamep' and return 0. The caller is responsible * for freeing '*devnamep' (with free()) when it no longer needs it. * * - Alternatively: return ENOBUFS, without indicating the device that was * added or deleted. * * Occasional 'false positives', in which the function returns 0 while * indicating a device that was not actually added or deleted or returns * ENOBUFS without any change, are acceptable. * * The purpose of 'port_poll' is to let 'ofproto' know about changes made * externally to the 'ofproto' object, e.g. by a system administrator via * ovs-dpctl. Therefore, it's OK, and even preferable, for port_poll() to * not report changes made through calls to 'port_add' or 'port_del' on the * same 'ofproto' object. (But it's OK for it to report them too, just * slightly less efficient.) * * If the set of ports in 'ofproto' has not changed, returns EAGAIN. May * also return other positive errno values to indicate that something has * gone wrong. * * If the set of ports in a datapath is fixed, or if the only way that the * set of ports in a datapath can change is through ->port_add() and * ->port_del(), then this function may be a null pointer. */ int (*port_poll)(const struct ofproto *ofproto, char **devnamep); /* Arranges for the poll loop to wake up when ->port_poll() will return a * value other than EAGAIN. * * If the set of ports in a datapath is fixed, or if the only way that the * set of ports in a datapath can change is through ->port_add() and * ->port_del(), or if the poll loop will always wake up anyway when * ->port_poll() will return a value other than EAGAIN, then this function * may be a null pointer. */ void (*port_poll_wait)(const struct ofproto *ofproto); /* Checks the status of LACP negotiation for 'port'. Returns 1 if LACP * partner information for 'port' is up-to-date, 0 if LACP partner * information is not current (generally indicating a connectivity * problem), or -1 if LACP is not enabled on 'port'. * * This function may be a null pointer if the ofproto implementation does * not support LACP. */ int (*port_is_lacp_current)(const struct ofport *port); /* ## ----------------------- ## */ /* ## OpenFlow Rule Functions ## */ /* ## ----------------------- ## */ /* Life-cycle functions for a "struct rule" (see "Life Cycle" above). * * ->rule_construct() should first check whether the rule is acceptable: * * - Validate that the matching rule in 'rule->cr' is supported by the * datapath. If not, then return an OpenFlow error code (as returned * by ofp_mkerr()). * * For example, if the datapath does not support registers, then it * should return an error if 'rule->cr' does not wildcard all * registers. * * - Validate that 'rule->actions' and 'rule->n_actions' are well-formed * OpenFlow actions that can be correctly implemented by the datapath. * If not, then return an OpenFlow error code (as returned by * ofp_mkerr()). * * The validate_actions() function (in ofp-util.c) can be useful as a * model for action validation, but it accepts all of the OpenFlow * actions that OVS understands. If your ofproto implementation only * implements a subset of those, then you should implement your own * action validation. * * If the rule is acceptable, then ->rule_construct() should modify the * flow table: * * - If there was already a rule with exactly the same matching criteria * and priority in the classifier, then it should destroy it (with * ofproto_rule_destroy()). * * To the greatest extent possible, the old rule should be destroyed * only if inserting the new rule succeeds; that is, ->rule_construct() * should be transactional. * * The function classifier_find_rule_exactly() can locate such a rule. * * - Insert the new rule into the ofproto's 'cls' classifier, and into * the datapath flow table. * * The function classifier_insert() inserts a rule into the classifier. * * Other than inserting 'rule->cr' into the classifier, ->rule_construct() * should not modify any base members of struct rule. * * ->rule_destruct() should remove 'rule' from the ofproto's 'cls' * classifier (e.g. with classifier_remove()) and from the datapath flow * table. */ struct rule *(*rule_alloc)(void); int (*rule_construct)(struct rule *rule); void (*rule_destruct)(struct rule *rule); void (*rule_dealloc)(struct rule *rule); /* Obtains statistics for 'rule', storing the number of packets that have * matched it in '*packet_count' and the number of bytes in those packets * in '*byte_count'. */ void (*rule_get_stats)(struct rule *rule, uint64_t *packet_count, uint64_t *byte_count); /* Applies the actions in 'rule' to 'packet'. (This implements sending * buffered packets for OpenFlow OFPT_FLOW_MOD commands.) * * Takes ownership of 'packet' (so it should eventually free it, with * ofpbuf_delete()). * * 'flow' reflects the flow information for 'packet'. All of the * information in 'flow' is extracted from 'packet', except for * flow->tun_id and flow->in_port, which are assigned the correct values * for the incoming packet. The register values are zeroed. * * The statistics for 'packet' should be included in 'rule'. * * Returns 0 if successful, otherwise an OpenFlow error code (as returned * by ofp_mkerr()). */ int (*rule_execute)(struct rule *rule, struct flow *flow, struct ofpbuf *packet); /* Validates that the 'n' elements in 'actions' are well-formed OpenFlow * actions that can be correctly implemented by the datapath. If not, then * return an OpenFlow error code (as returned by ofp_mkerr()). If so, * then update the datapath to implement the new actions and return 0. * * When this function runs, 'rule' still has its original actions. If this * function returns 0, then the caller will update 'rule' with the new * actions and free the old ones. */ int (*rule_modify_actions)(struct rule *rule, const union ofp_action *actions, size_t n); /* These functions implement the OpenFlow IP fragment handling policy. By * default ('drop_frags' == false), an OpenFlow switch should treat IP * fragments the same way as other packets (although TCP and UDP port * numbers cannot be determined). With 'drop_frags' == true, the switch * should drop all IP fragments without passing them through the flow * table. */ bool (*get_drop_frags)(struct ofproto *ofproto); void (*set_drop_frags)(struct ofproto *ofproto, bool drop_frags); /* Implements the OpenFlow OFPT_PACKET_OUT command. The datapath should * execute the 'n_actions' in the 'actions' array on 'packet'. * * The caller retains ownership of 'packet', so ->packet_out() should not * modify or free it. * * This function must validate that the 'n_actions' elements in 'actions' * are well-formed OpenFlow actions that can be correctly implemented by * the datapath. If not, then it should return an OpenFlow error code (as * returned by ofp_mkerr()). * * 'flow' reflects the flow information for 'packet'. All of the * information in 'flow' is extracted from 'packet', except for * flow->in_port, which is taken from the OFPT_PACKET_OUT message. * flow->tun_id and its register values are zeroed. * * 'packet' is not matched against the OpenFlow flow table, so its * statistics should not be included in OpenFlow flow statistics. * * Returns 0 if successful, otherwise an OpenFlow error code (as returned * by ofp_mkerr()). */ int (*packet_out)(struct ofproto *ofproto, struct ofpbuf *packet, const struct flow *flow, const union ofp_action *actions, size_t n_actions); /* ## ------------------------- ## */ /* ## OFPP_NORMAL configuration ## */ /* ## ------------------------- ## */ /* Configures NetFlow on 'ofproto' according to the options in * 'netflow_options', or turns off NetFlow if 'netflow_options' is NULL. * * EOPNOTSUPP as a return value indicates that 'ofproto' does not support * sFlow, as does a null pointer. */ int (*set_netflow)(struct ofproto *ofproto, const struct netflow_options *netflow_options); void (*get_netflow_ids)(const struct ofproto *ofproto, uint8_t *engine_type, uint8_t *engine_id); /* Configures sFlow on 'ofproto' according to the options in * 'sflow_options', or turns off sFlow if 'sflow_options' is NULL. * * EOPNOTSUPP as a return value indicates that 'ofproto' does not support * sFlow, as does a null pointer. */ int (*set_sflow)(struct ofproto *ofproto, const struct ofproto_sflow_options *sflow_options); /* Configures connectivity fault management on 'ofport'. * * If 'cfm' is nonnull, takes basic configuration from the configuration * members in 'cfm', and the set of remote maintenance points from the * 'n_remote_mps' elements in 'remote_mps'. Ignores the statistics members * of 'cfm'. * * If 'cfm' is null, removes any connectivity fault management * configuration from 'ofport'. * * EOPNOTSUPP as a return value indicates that this ofproto_class does not * support CFM, as does a null pointer. */ int (*set_cfm)(struct ofport *ofport, const struct cfm *cfm, const uint16_t *remote_mps, size_t n_remote_mps); /* Stores the connectivity fault management object associated with 'ofport' * in '*cfmp'. Stores a null pointer in '*cfmp' if CFM is not configured * on 'ofport'. The caller must not modify or destroy the returned object. * * This function may be NULL if this ofproto_class does not support CFM. */ int (*get_cfm)(struct ofport *ofport, const struct cfm **cfmp); /* If 's' is nonnull, this function registers a "bundle" associated with * client data pointer 'aux' in 'ofproto'. A bundle is the same concept as * a Port in OVSDB, that is, it consists of one or more "slave" devices * (Interfaces, in OVSDB) along with VLAN and LACP configuration and, if * there is more than one slave, a bonding configuration. If 'aux' is * already registered then this function updates its configuration to 's'. * Otherwise, this function registers a new bundle. * * If 's' is NULL, this function unregisters the bundle registered on * 'ofproto' associated with client data pointer 'aux'. If no such bundle * has been registered, this has no effect. * * This function affects only the behavior of the NXAST_AUTOPATH action and * output to the OFPP_NORMAL port. An implementation that does not support * it at all may set it to NULL or return EOPNOTSUPP. An implementation * that supports only a subset of the functionality should implement what * it can and return 0. */ int (*bundle_set)(struct ofproto *ofproto, void *aux, const struct ofproto_bundle_settings *s); /* If 'port' is part of any bundle, removes it from that bundle. If the * bundle now has no ports, deletes the bundle. If the bundle now has only * one port, deconfigures the bundle's bonding configuration. */ void (*bundle_remove)(struct ofport *ofport); /* If 's' is nonnull, this function registers a mirror associated with * client data pointer 'aux' in 'ofproto'. A mirror is the same concept as * a Mirror in OVSDB. If 'aux' is already registered then this function * updates its configuration to 's'. Otherwise, this function registers a * new mirror. * * If 's' is NULL, this function unregisters the mirror registered on * 'ofproto' associated with client data pointer 'aux'. If no such mirror * has been registered, this has no effect. * * This function affects only the behavior of the OFPP_NORMAL action. An * implementation that does not support it at all may set it to NULL or * return EOPNOTSUPP. An implementation that supports only a subset of the * functionality should implement what it can and return 0. */ int (*mirror_set)(struct ofproto *ofproto, void *aux, const struct ofproto_mirror_settings *s); /* Configures the VLANs whose bits are set to 1 in 'flood_vlans' as VLANs * on which all packets are flooded, instead of using MAC learning. If * 'flood_vlans' is NULL, then MAC learning applies to all VLANs. * * This function affects only the behavior of the OFPP_NORMAL action. An * implementation that does not support it may set it to NULL or return * EOPNOTSUPP. */ int (*set_flood_vlans)(struct ofproto *ofproto, unsigned long *flood_vlans); /* Returns true if 'aux' is a registered bundle that is currently in use as * the output for a mirror. */ bool (*is_mirror_output_bundle)(struct ofproto *ofproto, void *aux); }; extern const struct ofproto_class ofproto_dpif_class; int ofproto_class_register(const struct ofproto_class *); int ofproto_class_unregister(const struct ofproto_class *); void ofproto_add_flow(struct ofproto *, const struct cls_rule *, const union ofp_action *, size_t n_actions); void ofproto_delete_flow(struct ofproto *, const struct cls_rule *); void ofproto_flush_flows(struct ofproto *); #endif /* ofproto/private.h */