+openvswitch (2.1.90-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Nothing yet! Try NEWS...
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 23 Dec 2013 18:07:18 -0700
+
+openvswitch (2.1.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Address prefix tracking support for flow tables. New columns
+ "prefixes" in OVS-DB table "Flow_Table" controls which packet
+ header fields are used for address prefix tracking. Prefix
+ tracking allows the classifier to skip rules with longer than
+ necessary prefixes, resulting in better wildcarding for datapath
+ flows. Default configuration is to not use any fields for prefix
+ tracking. However, if any flow tables contain both exact matches
+ and masked matches for IP address fields, OVS performance may be
+ increased by using this feature.
+ * As of now, the fields for which prefix lookup can be enabled
+ are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
+ aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
+ (Using this feature for 'tun_id' would only make sense if the
+ tunnel IDs have prefix structure similar to IP addresses.)
+ * There is a maximum number of fields that can be enabled for any
+ one flow table. Currently this limit is 3.
+ * Examples:
+ $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
+ --id=@N1 create Flow_Table name=table0
+ $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
+ --id=@N1 create Flow_Table name=table1
+ $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
+ $ ovs-vsctl set Flow_Table table1 prefixes=[]
+ - TCP flags matching: OVS now supports matching of TCP flags. This
+ has an adverse performance impact when using OVS userspace 1.10
+ or older (no megaflows support) together with the new OVS kernel
+ module. It is recommended that the kernel and userspace modules
+ both are upgraded at the same time.
+ - The default OpenFlow and OVSDB ports will change to
+ IANA-assigned numbers in a future release. Consider updating
+ your installations to specify port numbers instead of using the
+ defaults.
+ - OpenFlow:
+ * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
+ * OVS limits the OpenFlow port numbers it assigns to port 32767 and
+ below, leaving port numbers above that range free for assignment
+ by the controller.
+ * ovs-vswitchd now honors changes to the "ofport_request" column
+ in the Interface table by changing the port's OpenFlow port
+ number.
+ - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
+ diagram only if graphviz package was installed at the build time.
+ - Support for Linux kernels up to 3.11
+ - ovs-dpctl:
+ The "show" command also displays mega flow mask stats.
+ - ovs-ofctl:
+ * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
+ - ovs-controller has been renamed test-controller. It is no longer
+ packaged or installed by default, because too many users assumed
+ incorrectly that ovs-controller was a necessary or desirable part
+ of an Open vSwitch deployment.
+ - Added vlog option to export to a UDP syslog sink.
+ - ovsdb-client:
+ * The "monitor" command can now monitor all tables in a database,
+ instead of being limited to a single table.
+ - The flow-eviction-threshold has been replaced by the flow-limit which is a
+ hard limit on the number of flows in the datapath. It defaults to 200,000
+ flows. OVS automatically adjusts this number depending on network
+ conditions.
+ * The openvswitch-controller package has been removed, because too many
+ users assumed incorrectly that ovs-controller was a necessary or
+ desirable part of an Open vSwitch deployment.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 23 Dec 2013 18:07:18 -0700
+
+openvswitch (2.0.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - The ovs-vswitchd process is no longer single-threaded. Multiple
+ threads are now used to handle flow set up and asynchronous
+ logging.
+ - OpenFlow:
+ * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
+ 1.3, which had experimental support in 1.10).
+ * New support for matching outer source and destination IP address
+ of tunneled packets, for tunnel ports configured with the newly
+ added "remote_ip=flow" and "local_ip=flow" options.
+ * Support for matching on metadata 'pkt_mark' for interacting with
+ other system components. On Linux this corresponds to the skb
+ mark.
+ * Support matching, rewriting SCTP ports
+ - The Interface table in the database has a new "ifindex" column to
+ report the interface's OS-assigned ifindex.
+ - New "check-oftest" Makefile target for running OFTest against Open
+ vSwitch. See README-OFTest for details.
+ - The flow eviction threshold has been moved to the Open_vSwitch table.
+ - Database names are now mandatory when specifying ovsdb-server options
+ through database paths (e.g. Private key option with the database name
+ should look like "--private-key=db:Open_vSwitch,SSL,private_key").
+ - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
+ - Support for Linux kernels up to 3.10
+ - ovs-ofctl:
+ * New "ofp-parse" for printing OpenFlow messages read from a file.
+ - Added configurable flow caching support to IPFIX exporter.
+ - Dropped support for Linux pre-2.6.32.
+ - Log file timestamps and ovsdb commit timestamps are now reported
+ with millisecond resolution. (Previous versions only reported
+ whole seconds.)
+
+ -- Open vSwitch team <dev@openvswitch.org> Tue, 15 Oct 2013 15:03:42 -0700
+
+openvswitch (1.11.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Support for megaflows, which allows wildcarding in the kernel (and
+ any dpif implementation that supports wildcards). Depending on
+ the flow table and switch configuration, flow set up rates are
+ close to the Linux bridge.
+ - The "tutorial" directory contains a new tutorial for some advanced
+ Open vSwitch features.
+ - Stable bond mode has been removed.
+ - The autopath action has been removed.
+ - New support for the data encapsulation format of the LISP tunnel
+ protocol (RFC 6830). An external control plane or manual flow
+ setup is required for EID-to-RLOC mapping.
+ - OpenFlow:
+ * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
+ 1.1 and later are now implemented.
+ * New "stack" extension for use in actions, to push and pop from
+ NXM fields.
+ * The "load" and "set_field" actions can now modify the "in_port". (This
+ allows one to enable output to a flow's input port by setting the
+ in_port to some unused value, such as OFPP_NONE.)
+ - ovs-dpctl:
+ * New debugging commands "add-flow", "mod-flow", "del-flow".
+ - In dpif-based bridges, cache action translations, which can improve
+ flow set up performance by 80% with a complicated flow table.
+ - New syslog format, prefixed with "ovs|", to be easier to filter.
+ - RHEL: Removes the default firewall rule that allowed GRE traffic to
+ pass through. Any users that relied on this automatic firewall hole
+ will have to manually configure it. The ovs-ctl(8) manpage documents
+ the "enable-protocol" command that can be used as an alternative.
+ - New CFM demand mode which uses data traffic to indicate interface
+ liveness.
+
+ -- Open vSwitch team <dev@openvswitch.org> Wed, 28 Aug 2013 14:31:44 -0700
+
+openvswitch (1.10.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Bridge compatibility support has been removed. Any uses that
+ rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
+ or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
+ of brctl).
+ - The maximum size of the MAC learning table is now configurable.
+ - With the Linux datapath, packets for new flows are now queued
+ separately on a per-port basis, so it should no longer be
+ possible for a large number of new flows arriving on one port to
+ prevent new flows from being processed on other ports.
+ - Many "ovs-vsctl" database commands now accept an --if-exists option.
+ Please refer to the ovs-vsctl manpage for details.
+ - OpenFlow:
+ - Experimental support for newer versions of OpenFlow. See
+ the "What versions of OpenFlow does Open vSwitch support?"
+ question in the FAQ for more details.
+ - The OpenFlow "dp_desc" may now be configured by setting the
+ value of other-config:dp-desc in the Bridge table.
+ - It is possible to request the OpenFlow port number with the
+ "ofport_request" column in the Interface table.
+ - Tunneling:
+ - New support for the VXLAN tunnel protocol (see the IETF draft here:
+ http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
+ - Tunneling requires the version of the kernel module paired with
+ Open vSwitch 1.9.0 or later.
+ - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
+ is no longer supported.
+ - Path MTU discovery is no longer supported.
+ - ovs-dpctl:
+ - The "dump-flows" and "del-flows" no longer require an argument
+ if only one datapath exists.
+ - ovs-appctl:
+ - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
+ commands available allow control over logging rate limits.
+ - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
+ that mimic the equivalent ovs-dpctl commands.
+ - The ofproto library is now responsible for assigning OpenFlow port
+ numbers. An ofproto implementation should assign them when
+ port_construct() is called.
+ - All dpif-based bridges of a particular type share a common
+ datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
+ commands will now return information on that shared datapath. To
+ get the equivalent bridge-specific information, use the new
+ "ovs-appctl dpif/*" commands.
+ - Backward-incompatible changes:
+ - Earlier Open vSwitch versions treated ANY as a wildcard in flow
+ syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
+ conflict. ANY was rarely used in flow syntax, so we chose to
+ retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
+ - Patch ports no longer require kernel support, so they now work
+ with FreeBSD and the kernel module built into Linux 3.3 and later.
+
+ -- Open vSwitch team <dev@openvswitch.org> Wed, 01 May 2013 14:28:21 -0700
+
+openvswitch (1.9.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Datapath:
+ - Support for ipv6 set action.
+ - SKB mark matching and setting.
+ - support for Linux kernels up to 3.8
+ - FreeBSD is now a supported platform, thanks to code contributions from
+ Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
+ - ovs-bugtool: New --ovs option to report only OVS related information.
+ - New %t and %T log escapes to identify the subprogram within a
+ cooperating group of processes or threads that emitted a log message.
+ The default log patterns now include this information.
+ - OpenFlow:
+ - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
+ fields in IPv6 neighbor discovery messages, and IPv6 flow label.
+ - Adds support for writing to the metadata field for a flow.
+ - Tunneling:
+ - The tunneling code no longer assumes input and output keys are
+ symmetric. If they are not, PMTUD needs to be disabled for
+ tunneling to work. Note this only applies to flow-based keys.
+ - New support for a nonstandard form of GRE that supports a 64-bit key.
+ - Tunnel Path MTU Discovery default value was set to 'disabled'.
+ This feature is deprecated and will be removed soon.
+ - Tunnel header caching removed.
+ - ovs-ofctl:
+ - Commands and actions that accept port numbers now also accept keywords
+ that represent those ports (such as LOCAL, NONE, and ALL). This is
+ also the recommended way to specify these ports, for compatibility
+ with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
+ for these ports for different purposes).
+ - ovs-dpctl:
+ - Support requesting the port number with the "port_no" option in
+ the "add-if" command.
+ - ovs-pki: The "online PKI" features have been removed, along with
+ the ovs-pki-cgi program that facilitated it, because of some
+ alarmist insecurity claims. We do not believe that these claims
+ are true, but because we do not know of any users for this
+ feature it seems better on balance to remove it. (The ovs-pki-cgi
+ program was not included in distribution packaging.)
+ - ovsdb-server now enforces the immutability of immutable columns. This
+ was not enforced in earlier versions due to an oversight.
+ - The following features are now deprecated. They will be removed no
+ earlier than February 2013. Please email dev@openvswitch.org with
+ concerns.
+ - Bridge compatibility.
+ - Stable bond mode.
+ - The autopath action.
+ - Interface type "null".
+ - Numeric values for reserved ports (see "ovs-ofctl" note above).
+ - Tunnel Path MTU Discovery.
+ - CAPWAP tunnel support.
+ - The data in the RARP packets can now be matched in the same way as the
+ data in ARP packets.
+
+ -- Open vSwitch team <dev@openvswitch.org> Tue, 26 Feb 2013 11:23:19 -0700
+
+openvswitch (1.8.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ *** Internal only release ***
+ - New FAQ. Please send updates and additions!
+ - Authors of controllers, please read the new section titled "Action
+ Reproduction" in DESIGN, which describes an Open vSwitch change in
+ behavior in corner cases that may affect some controllers.
+ - ovs-l3ping:
+ - A new test utility that can create L3 tunnel between two Open
+ vSwitches and detect connectivity issues.
+ - ovs-ofctl:
+ - New --sort and --rsort options for "dump-flows" command.
+ - "mod-port" command can now control all OpenFlow config flags.
+ - OpenFlow:
+ - Allow general bitwise masking for IPv4 and IPv6 addresses in
+ IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
+ were allowed.)
+ - Allow support for arbitrary Ethernet masks. (Previously, only
+ the multicast bit in the destination address could be individually
+ masked.)
+ - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
+ - The OFPST_QUEUE request now reports an error if a specified port or
+ queue does not exist, or for requests for a specific queue on all
+ ports, if the specified queue does not exist on any port. (Previous
+ versions generally reported an empty set of results.)
+ - New "flow monitor" feature to allow controllers to be notified of
+ flow table changes as they happen.
+ - Additional protocols are not mirrored and dropped when forward-bpdu is
+ false. For a full list, see the ovs-vswitchd.conf.db man page.
+ - Open vSwitch now sends RARP packets in situations where it previously
+ sent a custom protocol, making it consistent with behavior of QEMU and
+ VMware.
+ - All Open vSwitch programs and log files now show timestamps in UTC,
+ instead the local timezone, by default.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
+
+openvswitch (1.7.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - kernel modules are renamed. openvswitch_mod.ko is now
+ openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
+ - Increased the number of NXM registers to 8.
+ - Added ability to configure dscp setting for manager and controller
+ connections. By default, these connections have a DSCP value of
+ Internetwork Control (0xc0).
+ - Added the granular link health statistics, 'cfm_health', to an
+ interface.
+ - OpenFlow:
+ - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
+ - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
+ multipart messages.
+ - ovs-ofctl:
+ - Added the "dump-ports-desc" command to retrieve port
+ information using the new port description multipart messages.
+ - ovs-test:
+ - Added support for spawning ovs-test server from the client.
+ - Now ovs-test is able to automatically create test bridges and ports.
+ - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
+ - Tripled flow setup performance.
+ - The "coverage/log" command previously available through ovs-appctl
+ has been replaced by "coverage/show". The new command replies with
+ coverage counter values, instead of logging them.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
+
+openvswitch (1.6.1-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
+
+openvswitch (1.6.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - bonding
+ - LACP bonds no longer fall back to balance-slb when negotiations fail.
+ Instead they drop traffic.
+ - The default bond_mode changed from SLB to active-backup, to protect
+ unsuspecting users from the significant risks of SLB bonds (which are
+ documented in vswitchd/INTERNALS).
+ - Load balancing can be disabled by setting the bond-rebalance-interval
+ to zero.
+ - OpenFlow:
+ - Added support for bitwise matching on TCP and UDP ports.
+ See ovs-ofctl(8) for more information.
+ - NXM flow dumps now include times elapsed toward idle and hard
+ timeouts.
+ - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
+ controllers more precise control over which OpenFlow messages they
+ receive asynchronously.
+ - New "fin_timeout" action.
+ - Added "fin_timeout" support to "learn" action.
+ - The default MAC learning timeout has been increased from 60 seconds
+ to 300 seconds. The MAC learning timeout is now configurable.
+ - When QoS settings for an interface do not configure a default queue
+ (queue 0), Open vSwitch now uses a default configuration for that
+ queue, instead of dropping all packets as in previous versions.
+ - Logging to console and file will have UTC timestamp as a default for all
+ the daemons. An example of the default format is 2012-01-27T16:35:17Z.
+ ovs-appctl can be used to change the default format as before.
+ - New support for limiting the number of flows in an OpenFlow flow
+ table, with configurable policy for evicting flows upon
+ overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
+ for more information.
+ - New "enable-async-messages" column in the Controller table. If set to
+ false, OpenFlow connections to the controller will initially have all
+ asynchronous messages disabled, overriding normal OpenFlow behavior.
+ - ofproto-provider interface:
+ - "struct rule" has a new member "used" that ofproto implementations
+ should maintain by updating with ofproto_rule_update_used().
+ - ovsdb-client:
+ - The new option --timestamp causes the "monitor" command to print
+ a timestamp with every update.
+ - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
+
+ -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
+
+openvswitch (1.5.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - OpenFlow:
+ - Added support for querying, modifying, and deleting flows
+ based on flow cookie when using NXM.
+ - Added new NXM_PACKET_IN format.
+ - ovs-ofctl:
+ - Added daemonization support to the monitor and snoop commands.
+ - ovs-vsctl:
+ - The "find" command supports new set relational operators
+ {=}, {!=}, {<}, {>}, {<=}, and {>=}.
+ - ovsdb-tool now uses the typical database and schema installation
+ directories as defaults.
+
+ -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
+
+openvswitch (1.4.0+git20120426-1) unstable; urgency=low
+
+ * New upstream release fixing the following bugs:
+ o Broken log rotation.
+ o Use-after-free error when ports disappear.
+ o Minor memory leaks.
+ o Testsuite failures on big-endian architectures.
+
+ -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
+
+openvswitch (1.4.0+git20120321-1) unstable; urgency=low
+
+ * New upstream version including:
+ o Features:
+ - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
+ - vswitchd: Make the MAC entry aging time configurable.
+ - mac-learning: Increase MAC learning timeout to 300 seconds.
+ o Bug fixes:
+ - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
+ queues.
+ - netlink-socket: Increase Netlink socket receive buffer size.
+ - ofproto: Fix code that keeps track of MTU.
+ - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
+ - bond: Incorrectly reported an error in appctl.
+ - socket-util: Unlink Unix domain sockets that bind but fail to connect.
+ - bridge: Remove unwanted ports at time of ofproto creation.
+ - dpif-linux: Make dpif_linux_port_query_by_name() query only one
+ datapath.
+ - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
+ - configure: Try to extract kernel source directory from build Makefile.
+ - vswitchd: Always configure a default queue for QoS.
+ - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
+ - sflow_agent: Use snprintf() in place of sprintf().
+ o Packaging:
+ - Move PKI directory to FHS-compliant location. Closes: #661090.
+ Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
+ this bug.
+ - Use a different way to avoid failing install without kernel module.
+ - Avoid unit test failure when doing "unofficial" builds.
+ - Bump standards-version to 3.9.3.
+ - Remove some useless files from the dkms package.
+ - Clean .pyc files in "clean" target.
+ - Remove po-debconf build dependency.
+ - Build-depend on python-all to pull in all Python versions.
+ - Add missing ${python:Depends} to openvswitch-test package.
+ - Improve long descriptions so as to better describe the packages.
+ - Bump debhelper compat level to 8 and make build-depends consistent.
+ - Fix exit status of openvswitch-switch init script "status" command.
+ - Use provided kernel source dir instead of host kernel version.
+ - Do not run "make" if "configure" fails during DKMS build.
+ - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
+ - Fix dependencies for openvswitch-datapath-dkms package.
+ - Don't install Python modules for obsolete Python versions.
+ - Add dependency on ${misc:Depends} to openvswitch-test
+ o Documentation improvements:
+ - ovsdb-doc: Use minus sign in negative numbers in nroff output.
+ - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
+ hyphen.
+ - ovsdb-doc: Put NAME section into generated manpage.
+ - Fix typo in manpage.
+ - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
+ - netdev: Fix typo in error message.
+ - INSTALL.Linux: minor typo
+
+ * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
+ of the packaging fixes listed above.
+
+ * This version fixes most of the lintian errors described in bug
+ #663051, but a few remain, so this upload does not close that bug. I
+ believe that this upload should be suitable for downgrading that bug's
+ severity.
+
+ -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
+
+openvswitch (1.4.0-2+nmu1) unstable; urgency=low
+
+ * Non maintainer upload.
+ * Removes all patches in debian/patches, because they are patching stuff
+ inconditionally in debian/*, and this should be applied by default.
+ * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
+ the kernel module builds as expected (Closes: #659685).
+
+ -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
+
+openvswitch (1.4.0-2) unstable; urgency=low
+
+ * Use explicit DKMS variable for kernel source directory
+ - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
+ - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
+ - 0001-debian-Use-provided-kernel-source-dir.patch
+ - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
+ - (closes: #659685)
+ * Don't install Python modules for obsolete Python versions
+ - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
+
+ -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
+