+#ifdef CONFIG_USB_SUSPEND
+
+/*
+ * Selective port suspend reduces power; most suspended devices draw
+ * less than 500 uA. It's also used in OTG, along with remote wakeup.
+ * All devices below the suspended port are also suspended.
+ *
+ * Devices leave suspend state when the host wakes them up. Some devices
+ * also support "remote wakeup", where the device can activate the USB
+ * tree above them to deliver data, such as a keypress or packet. In
+ * some cases, this wakes the USB host.
+ */
+static int hub_port_suspend(struct usb_device *hdev, int port)
+{
+ int status;
+ struct usb_device *udev;
+
+ udev = hdev->children[port - 1];
+ // dev_dbg(hubdev(hdev), "suspend port %d\n", port);
+
+ /* enable remote wakeup when appropriate; this lets the device
+ * wake up the upstream hub (including maybe the root hub).
+ *
+ * NOTE: OTG devices may issue remote wakeup (or SRP) even when
+ * we don't explicitly enable it here.
+ */
+ if (udev->actconfig
+ // && FIXME (remote wakeup enabled on this bus)
+ // ... currently assuming it's always appropriate
+ && (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP) != 0) {
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status)
+ dev_dbg(&udev->dev,
+ "won't remote wakeup, status %d\n",
+ status);
+ }
+
+ /* see 7.1.7.6 */
+ status = set_port_feature(hdev, port, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hubdev(hdev),
+ "can't suspend port %d, status %d\n",
+ port, status);
+ /* paranoia: "should not happen" */
+ (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ /* device has up to 10 msec to fully suspend */
+ dev_dbg(&udev->dev, "usb suspend\n");
+ udev->state = USB_STATE_SUSPENDED;
+ msleep(10);
+ }
+ return status;
+}
+
+/*
+ * Devices on USB hub ports have only one "suspend" state, corresponding
+ * to ACPI D2 (PM_SUSPEND_MEM), "may cause the device to lose some context".
+ * State transitions include:
+ *
+ * - suspend, resume ... when the VBUS power link stays live
+ * - suspend, disconnect ... VBUS lost
+ *
+ * Once VBUS drop breaks the circuit, the port it's using has to go through
+ * normal re-enumeration procedures, starting with enabling VBUS power.
+ * Other than re-initializing the hub (plug/unplug, except for root hubs),
+ * Linux (2.6) currently has NO mechanisms to initiate that: no khubd
+ * timer, no SRP, no requests through sysfs.
+ */
+static int __usb_suspend_device (struct usb_device *udev, int port, u32 state)
+{
+ int status;
+
+ if (port < 0)
+ return port;
+
+ /* NOTE: udev->serialize released on all real returns! */
+
+ if (state <= udev->dev.power.power_state
+ || state < PM_SUSPEND_MEM
+ || udev->state == USB_STATE_SUSPENDED
+ || udev->state == USB_STATE_NOTATTACHED) {
+ up(&udev->serialize);
+ return 0;
+ }
+
+ /* suspend interface drivers; if this is a hub, it
+ * suspends the child devices
+ */
+ if (udev->actconfig) {
+ int i;
+
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = udev->actconfig->interface[i];
+ if (state <= intf->dev.power.power_state)
+ continue;
+ if (!intf->dev.driver)
+ continue;
+ driver = to_usb_driver(intf->dev.driver);
+
+ if (driver->suspend) {
+ status = driver->suspend(intf, state);
+ if (intf->dev.power.power_state != state
+ || status)
+ dev_err(&intf->dev,
+ "suspend %d fail, code %d\n",
+ state, status);
+ }
+
+ /* only drivers with suspend() can ever resume();
+ * and after power loss, even they won't.
+ * bus_rescan_devices() can rebind drivers later.
+ *
+ * FIXME the PM core self-deadlocks when unbinding
+ * drivers during suspend/resume ... everything grabs
+ * dpm_sem (not a spinlock, ugh). we want to unbind,
+ * since we know every driver's probe/disconnect works
+ * even for drivers that can't suspend.
+ */
+ if (!driver->suspend || state > PM_SUSPEND_MEM) {
+#if 1
+ dev_warn(&intf->dev, "resume is unsafe!\n");
+#else
+ down_write(&usb_bus_type.rwsem);
+ device_release_driver(&intf->dev);
+ up_write(&usb_bus_type.rwsem);
+#endif
+ }
+ }
+ }
+
+ /*
+ * FIXME this needs port power off call paths too, to help force
+ * USB into the "generic" PM model. At least for devices on
+ * ports that aren't using ganged switching (usually root hubs).
+ *
+ * NOTE: SRP-capable links should adopt more aggressive poweroff
+ * policies (when HNP doesn't apply) once we have mechanisms to
+ * turn power back on! (Likely not before 2.7...)
+ */
+ if (state > PM_SUSPEND_MEM) {
+ dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
+ state = PM_SUSPEND_MEM;
+ }
+
+ /* "global suspend" of the HC-to-USB interface (root hub), or
+ * "selective suspend" of just one hub-device link.
+ */
+ if (!udev->parent) {
+ struct usb_bus *bus = udev->bus;
+ if (bus && bus->op->hub_suspend)
+ status = bus->op->hub_suspend (bus);
+ else
+ status = -EOPNOTSUPP;
+ } else
+ status = hub_port_suspend(udev->parent, port + 1);
+
+ if (status == 0)
+ udev->dev.power.power_state = state;
+ up(&udev->serialize);
+ return status;
+}
+
+/**
+ * usb_suspend_device - suspend a usb device
+ * @udev: device that's no longer in active use
+ * @state: PM_SUSPEND_MEM to suspend
+ * Context: must be able to sleep; device not locked
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism. They may also be taken out of
+ * suspend by the host, using usb_resume_device(). It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices. That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_suspend_device(struct usb_device *udev, u32 state)
+{
+ return __usb_suspend_device(udev, locktree(udev), state);
+}
+
+/*
+ * hardware resume signaling is finished, either because of selective
+ * resume (by host) or remote wakeup (by device) ... now see what changed
+ * in the tree that's rooted at this device.
+ */
+static int finish_port_resume(struct usb_device *udev)
+{
+ int status;
+ u16 devstatus;
+
+ /* caller owns udev->serialize */
+ dev_dbg(&udev->dev, "usb resume\n");
+ udev->dev.power.power_state = PM_SUSPEND_ON;
+
+ /* usb ch9 identifies four variants of SUSPENDED, based on what
+ * state the device resumes to. Linux currently won't see the
+ * first two on the host side; they'd be inside hub_port_init()
+ * during many timeouts, but khubd can't suspend until later.
+ */
+ udev->state = udev->actconfig
+ ? USB_STATE_CONFIGURED
+ : USB_STATE_ADDRESS;
+
+ /* 10.5.4.5 says be sure devices in the tree are still there.
+ * For now let's assume the device didn't go crazy on resume,
+ * and device drivers will know about any resume quirks.
+ */
+ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+ if (status < 0)
+ dev_dbg(&udev->dev,
+ "gone after usb resume? status %d\n",
+ status);
+ else if (udev->actconfig) {
+ unsigned i;
+
+ le16_to_cpus(&devstatus);
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status) {
+ dev_dbg(&udev->dev, "disable remote "
+ "wakeup, status %d\n", status);
+ status = 0;
+ }
+ }
+
+ /* resume interface drivers; if this is a hub, it
+ * resumes the child devices
+ */
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = udev->actconfig->interface[i];
+ if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ continue;
+ if (!intf->dev.driver) {
+ /* FIXME maybe force to alt 0 */
+ continue;
+ }
+ driver = to_usb_driver(intf->dev.driver);
+
+ /* bus_rescan_devices() may rebind drivers */
+ if (!driver->resume)
+ continue;
+
+ /* can we do better than just logging errors? */
+ status = driver->resume(intf);
+ if (intf->dev.power.power_state != PM_SUSPEND_ON
+ || status)
+ dev_dbg(&intf->dev,
+ "resume fail, state %d code %d\n",
+ intf->dev.power.power_state, status);
+ }
+ status = 0;
+
+ } else if (udev->devnum <= 0) {
+ dev_dbg(&udev->dev, "bogus resume!\n");
+ status = -EINVAL;
+ }
+ return status;
+}
+
+static int
+hub_port_resume(struct usb_device *hdev, int port)
+{
+ int status;
+ struct usb_device *udev;
+
+ udev = hdev->children[port - 1];
+ // dev_dbg(hubdev(hdev), "resume port %d\n", port);
+
+ /* see 7.1.7.7; affects power usage, but not budgeting */
+ status = clear_port_feature(hdev, port, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(&hdev->actconfig->interface[0]->dev,
+ "can't resume port %d, status %d\n",
+ port, status);
+ } else {
+ u16 devstatus;
+ u16 portchange;
+
+ /* drive resume for at least 20 msec */
+ dev_dbg(&udev->dev, "RESUME\n");
+ msleep(25);
+
+#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
+ | USB_PORT_STAT_ENABLE \
+ | USB_PORT_STAT_CONNECTION)
+
+ /* Virtual root hubs can trigger on GET_PORT_STATUS to
+ * stop resume signaling. Then finish the resume
+ * sequence.
+ */
+ devstatus = portchange = 0;
+ status = hub_port_status(hdev, port - 1,
+ &devstatus, &portchange);
+ if (status < 0
+ || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
+ || (devstatus & USB_PORT_STAT_SUSPEND) != 0
+ ) {
+ dev_dbg(&hdev->actconfig->interface[0]->dev,
+ "port %d status %04x.%04x after resume, %d\n",
+ port, portchange, devstatus, status);
+ } else {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ status = finish_port_resume(udev);
+ }
+ }
+ if (status < 0)
+ status = hub_port_disable(hdev, port);
+
+ return status;
+}
+
+static int hub_resume (struct usb_interface *intf);
+
+/**
+ * usb_resume_device - re-activate a suspended usb device
+ * @udev: device to re-activate
+ * Context: must be able to sleep; device not locked
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_resume_device(struct usb_device *udev)
+{
+ int port, status;
+
+ port = locktree(udev);
+ if (port < 0)
+ return port;
+
+ /* "global resume" of the HC-to-USB interface (root hub), or
+ * selective resume of one hub-to-device port
+ */
+ if (!udev->parent) {
+ struct usb_bus *bus = udev->bus;
+ if (bus && bus->op->hub_resume)
+ status = bus->op->hub_resume (bus);
+ else
+ status = -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ status = hub_resume (bus->root_hub
+ ->actconfig->interface[0]);
+ }
+ } else if (udev->state == USB_STATE_SUSPENDED) {
+ status = hub_port_resume(udev->parent, port + 1);
+ } else {
+ status = 0;
+ udev->dev.power.power_state = PM_SUSPEND_ON;
+ }
+ if (status < 0) {
+ dev_dbg(&udev->dev, "can't resume, status %d\n",
+ status);
+ }
+
+ up(&udev->serialize);
+
+ /* rebind drivers that had no suspend() */
+ bus_rescan_devices(&usb_bus_type);
+
+ return status;
+}
+
+static int remote_wakeup(struct usb_device *udev)
+{
+ int status = 0;
+
+ /* don't repeat RESUME sequence if this device
+ * was already woken up by some other task
+ */
+ down(&udev->serialize);
+ if (udev->state == USB_STATE_SUSPENDED) {
+ dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ status = finish_port_resume(udev);
+ }
+ up(&udev->serialize);
+ return status;
+}
+
+static int hub_suspend(struct usb_interface *intf, u32 state)
+{
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ struct usb_device *hdev = hub->hdev;
+ unsigned port;
+ int status;
+
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
+
+ /* then suspend every port */
+ for (port = 0; port < hdev->maxchild; port++) {
+ struct usb_device *udev;
+
+ udev = hdev->children [port];
+ if (!udev)
+ continue;
+ down(&udev->serialize);
+ status = __usb_suspend_device(udev, port, state);
+ if (status < 0)
+ dev_dbg(&intf->dev, "suspend port %d --> %d\n",
+ port, status);
+ }
+
+ intf->dev.power.power_state = state;
+ return 0;
+}
+
+static int hub_resume(struct usb_interface *intf)
+{
+ struct usb_device *hdev = interface_to_usbdev(intf);
+ struct usb_hub *hub = usb_get_intfdata (intf);
+ unsigned port;
+ int status;
+
+ for (port = 0; port < hdev->maxchild; port++) {
+ struct usb_device *udev;
+ u16 portstat, portchange;
+
+ udev = hdev->children [port];
+ status = hub_port_status(hdev, port, &portstat, &portchange);
+ if (status == 0) {
+ if (portchange & USB_PORT_STAT_C_SUSPEND) {
+ clear_port_feature(hdev, port + 1,
+ USB_PORT_FEAT_C_SUSPEND);
+ portchange &= ~USB_PORT_STAT_C_SUSPEND;
+ }
+
+ /* let khubd handle disconnects etc */
+ if (portchange)
+ continue;
+ }
+
+ if (!udev)
+ continue;
+ down (&udev->serialize);
+ if (portstat & USB_PORT_STAT_SUSPEND)
+ status = hub_port_resume(hdev, port + 1);
+ else {
+ status = finish_port_resume(udev);
+ if (status < 0)
+ status = hub_port_disable(hdev, port);
+ if (status < 0)
+ dev_dbg(&intf->dev, "resume port %d --> %d\n",
+ port, status);
+ }
+ up(&udev->serialize);
+ }
+ intf->dev.power.power_state = PM_SUSPEND_ON;
+
+ hub_reactivate(hub);
+ return 0;
+}
+
+#else /* !CONFIG_USB_SUSPEND */
+
+int usb_suspend_device(struct usb_device *udev, u32 state)
+{
+ return 0;
+}
+
+int usb_resume_device(struct usb_device *udev)
+{
+ return 0;
+}
+
+#define hub_suspend NULL
+#define hub_resume NULL
+#define remote_wakeup(x) 0
+
+#endif /* CONFIG_USB_SUSPEND */
+
+EXPORT_SYMBOL(usb_suspend_device);
+EXPORT_SYMBOL(usb_resume_device);
+
+
+