-/**
- * usb_disconnect - disconnect a device (usbcore-internal)
- * @pdev: pointer to device being disconnected
- * Context: !in_interrupt ()
- *
- * Something got disconnected. Get rid of it, and all of its children.
- *
- * Only hub drivers (including virtual root hub drivers for host
- * controllers) should ever call this.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- */
-void usb_disconnect(struct usb_device **pdev)
-{
- struct usb_device *dev = *pdev;
- struct usb_bus *bus;
- struct usb_operations *ops;
- int i;
-
- might_sleep ();
-
- if (!dev) {
- pr_debug ("%s nodev\n", __FUNCTION__);
- return;
- }
- bus = dev->bus;
- if (!bus) {
- pr_debug ("%s nobus\n", __FUNCTION__);
- return;
- }
- ops = bus->op;
-
- *pdev = NULL;
-
- /* mark the device as inactive, so any further urb submissions for
- * this device will fail.
- */
- dev->state = USB_STATE_NOTATTACHED;
- down(&dev->serialize);
-
- dev_info (&dev->dev, "USB disconnect, address %d\n", dev->devnum);
-
- /* Free up all the children before we remove this device */
- for (i = 0; i < USB_MAXCHILDREN; i++) {
- struct usb_device **child = dev->children + i;
- if (*child)
- usb_disconnect(child);
- }
-
- /* deallocate hcd/hardware state ... nuking all pending urbs and
- * cleaning up all state associated with the current configuration
- */
- usb_disable_device(dev, 0);
-
- /* Free the device number and remove the /proc/bus/usb entry */
- dev_dbg (&dev->dev, "unregistering device\n");
- usb_release_address(dev);
- usbfs_remove_device(dev);
- up(&dev->serialize);
- device_unregister(&dev->dev);
-}
-
-/**
- * usb_choose_address - pick device address (usbcore-internal)
- * @dev: newly detected device (in DEFAULT state)
- *
- * Picks a device address. It's up to the hub (or root hub) driver
- * to handle and manage enumeration, starting from the DEFAULT state.
- * Only hub drivers (but not virtual root hub drivers for host
- * controllers) should ever call this.
- */
-void usb_choose_address(struct usb_device *dev)
-{
- int devnum;
- // FIXME needs locking for SMP!!
- /* why? this is called only from the hub thread,
- * which hopefully doesn't run on multiple CPU's simultaneously 8-)
- */
-
- /* Try to allocate the next devnum beginning at bus->devnum_next. */
- devnum = find_next_zero_bit(dev->bus->devmap.devicemap, 128, dev->bus->devnum_next);
- if (devnum >= 128)
- devnum = find_next_zero_bit(dev->bus->devmap.devicemap, 128, 1);
-
- dev->bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
-
- if (devnum < 128) {
- set_bit(devnum, dev->bus->devmap.devicemap);
- dev->devnum = devnum;
- }
-}
-
-/**
- * usb_release_address - deallocate device address (usbcore-internal)
- * @dev: newly removed device
- *
- * Removes and deallocates the address assigned to a device.
- * Only hub drivers (but not virtual root hub drivers for host
- * controllers) should ever call this.
- */
-void usb_release_address(struct usb_device *dev)
-{
- if (dev->devnum > 0) {
- clear_bit(dev->devnum, dev->bus->devmap.devicemap);
- dev->devnum = -1;
- }
-}
-
-
-static inline void usb_show_string(struct usb_device *dev, char *id, int index)
-{
- char *buf;
-
- if (!index)
- return;
- if (!(buf = kmalloc(256, GFP_KERNEL)))
- return;
- if (usb_string(dev, index, buf, 256) > 0)
- dev_printk(KERN_INFO, &dev->dev, "%s: %s\n", id, buf);
- kfree(buf);
-}
-
-static int usb_choose_configuration(struct usb_device *dev)
-{
- int c, i;
-
- c = dev->config[0].desc.bConfigurationValue;
- if (dev->descriptor.bNumConfigurations != 1) {
- for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
- struct usb_interface_descriptor *desc;
-
- /* heuristic: Linux is more likely to have class
- * drivers, so avoid vendor-specific interfaces.
- */
- desc = &dev->config[i].intf_cache[0]
- ->altsetting->desc;
- if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
- continue;
- /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS */
- if (desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff)
- continue;
- c = dev->config[i].desc.bConfigurationValue;
- break;
- }
- dev_info(&dev->dev,
- "configuration #%d chosen from %d choices\n",
- c, dev->descriptor.bNumConfigurations);
- }
- return c;
-}
-
-/*
- * usb_new_device - perform initial device setup (usbcore-internal)
- * @dev: newly addressed device (in ADDRESS state)
- *
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
- * for any device configuration. The caller owns dev->serialize, and
- * the device is not visible through sysfs or other filesystem code.
- *
- * Returns 0 for success (device is configured and listed, with its
- * interfaces, in sysfs); else a negative errno value. On error, one
- * reference count to the device has been dropped.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver should ever call this; root hub registration
- * uses it only indirectly.
- */
-int usb_new_device(struct usb_device *dev)
-{
- int err;
- int c;
-
- err = usb_get_configuration(dev);
- if (err < 0) {
- dev_err(&dev->dev, "can't read configurations, error %d\n",
- err);
- goto fail;
- }
-
- /* Tell the world! */
- dev_dbg(&dev->dev, "new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
- dev->descriptor.iManufacturer, dev->descriptor.iProduct, dev->descriptor.iSerialNumber);
-
-#ifdef DEBUG
- if (dev->descriptor.iProduct)
- usb_show_string(dev, "Product", dev->descriptor.iProduct);
- if (dev->descriptor.iManufacturer)
- usb_show_string(dev, "Manufacturer", dev->descriptor.iManufacturer);
- if (dev->descriptor.iSerialNumber)
- usb_show_string(dev, "SerialNumber", dev->descriptor.iSerialNumber);
-#endif
-
- /* put device-specific files into sysfs */
- err = device_add (&dev->dev);
- if (err) {
- dev_err(&dev->dev, "can't device_add, error %d\n", err);
- goto fail;
- }
- usb_create_sysfs_dev_files (dev);
-
- /* choose and set the configuration. that registers the interfaces
- * with the driver core, and lets usb device drivers bind to them.
- * NOTE: should interact with hub power budgeting.
- */
- c = usb_choose_configuration(dev);
- err = usb_set_configuration(dev, c);
- if (err) {
- dev_err(&dev->dev, "can't set config #%d, error %d\n", c, err);
- device_del(&dev->dev);
- goto fail;
- }
-
- /* USB device state == configured ... usable */
-
- /* add a /proc/bus/usb entry */
- usbfs_add_device(dev);
-
- return 0;
-fail:
- dev->state = USB_STATE_NOTATTACHED;
- usb_release_address(dev);
- usb_put_dev(dev);
- return err;
-}
-