- LINUX ALLOCATED DEVICES
+ LINUX ALLOCATED DEVICES (2.6+ version)
Maintained by Torben Mathiasen <device@lanana.org>
- Last revised: 04 August 2004
+ Last revised: 15 May 2006
This list is the Linux Device List, the official registry of allocated
device numbers and /dev directory nodes for the Linux operating
the Atari platform only.
The symbol {2.6} means the allocation is obsolete and scheduled for
-removal once kernel version 2.6 (or equivalent) is released.
+removal once kernel version 2.6 (or equivalent) is released. Some of these
+allocations have already been removed.
This document is in the public domain. The author requests, however,
that semantically altered versions are not distributed without
**** DEVICE DRIVERS AUTHORS PLEASE READ THIS ****
-THE DEVICE REGISTRY IS OFFICIALLY FROZEN FOR LINUS TORVALDS' KERNEL
-TREE. At Linus' request, no more allocations will be made official
-for Linus' kernel tree; the 3 June 2001 version of this list is the
-official final version of this registry. At Alan Cox' request,
-however, the registry will continue to be maintained for the -ac
-series of kernels, and registrations will be accepted.
-
To have a major number allocated, or a minor number in situations
where that applies (e.g. busmice), please contact me with the
appropriate device information. Also, if you have additional
NOTE: These devices permit both read and write access.
7 block Loopback devices
- 0 = /dev/loop0 First loopback device
- 1 = /dev/loop1 Second loopback device
+ 0 = /dev/loop0 First loop device
+ 1 = /dev/loop1 Second loop device
...
- The loopback devices are used to mount filesystems not
+ The loop devices are used to mount filesystems not
associated with block devices. The binding to the
- loopback devices is handled by mount(8) or losetup(8).
+ loop devices is handled by mount(8) or losetup(8).
8 block SCSI disk devices (0-15)
0 = /dev/sda First SCSI disk whole disk
226 = /dev/systrace Systrace device
227 = /dev/mcelog X86_64 Machine Check Exception driver
228 = /dev/hpet HPET driver
+ 229 = /dev/fuse Fuse (virtual filesystem in user-space)
+ 230 = /dev/midishare MidiShare driver
240-254 Reserved for local use
255 Reserved for MISC_DYNAMIC_MINOR
240 = /dev/ftlp FTL on 16th Memory Technology Device
Partitions are handled in the same way as for IDE
- disks (see major number 3) expect that the partition
+ disks (see major number 3) except that the partition
limit is 15 rather than 63 per disk (same as SCSI.)
45 char isdn4linux ISDN BRI driver
The filename of the encrypted container and the passwords
are sent via ioctls (using the sdmount tool) to the master
node which then activates them via one of the
- /dev/scramdisk/x nodes for loopback mounting (all handled
+ /dev/scramdisk/x nodes for loop mounting (all handled
through the sdmount tool).
Requested by: andy@scramdisklinux.org
- 65 char Sundance "plink" Transputer boards
+ 65 char Sundance "plink" Transputer boards (obsolete, unused)
0 = /dev/plink0 First plink device
1 = /dev/plink1 Second plink device
2 = /dev/plink2 Third plink device
disks (see major number 3) except that the limit on
partitions is 15.
- 83 char Teletext/videotext interfaces {2.6}
- 0 = /dev/vtx Teletext decoder
- 16 = /dev/vttuner TV tuner on teletext interface
-
- Devices for the driver contained in the VideoteXt package.
- More information on http://home.pages.de/~videotext/
+ 83 char Matrox mga_vid video driver
+ 0 = /dev/mga_vid0 1st video card
+ 1 = /dev/mga_vid1 2nd video card
+ 2 = /dev/mga_vid2 3rd video card
+ ...
+ 15 = /dev/mga_vid15 16th video card
83 block I2O hard disk
0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
3 = /dev/ipauth Authentication control device/log file
...
- 95 block IBM S/390 VM/ESA minidisk
- 0 = /dev/msd0 First VM/ESA minidisk
- 1 = /dev/msd1 Second VM/ESA minidisk
- ...
-
96 char Parallel port ATAPI tape devices
0 = /dev/pt0 First parallel port ATAPI tape
1 = /dev/pt1 Second parallel port ATAPI tape
These devices support the same API as the generic SCSI
devices.
- 97 block Packet writing for CD/DVD devices
- 0 = /dev/pktcdvd0 First packet-writing module
- 1 = /dev/pktcdvd1 Second packet-writing module
- ...
-
98 char Control and Measurement Device (comedi)
0 = /dev/comedi0 First comedi device
1 = /dev/comedi1 Second comedi device
See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
98 block User-mode virtual block device
- 0 = /dev/ubd0 First user-mode block device
- 1 = /dev/ubd1 Second user-mode block device
+ 0 = /dev/ubda First user-mode block device
+ 16 = /dev/udbb Second user-mode block device
...
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
This device is used by the user-mode virtual kernel port.
99 char Raw parallel ports
disks (see major number 3) except that the limit on
partitions is 15.
+130 char (Misc devices)
130 block SCSI disk devices (160-175)
0 = /dev/sdfe 161st SCSI disk whole disk
0 = /dev/usb/lp0 First USB printer
...
15 = /dev/usb/lp15 16th USB printer
- 16 = /dev/usb/mouse0 First USB mouse
- ...
- 31 = /dev/usb/mouse15 16th USB mouse
- 32 = /dev/usb/ez0 First USB firmware loader
- ...
- 47 = /dev/usb/ez15 16th USB firmware loader
48 = /dev/usb/scanner0 First USB scanner
...
63 = /dev/usb/scanner15 16th USB scanner
64 = /dev/usb/rio500 Diamond Rio 500
65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
+ 96 = /dev/usb/hiddev0 1st USB HID device
+ ...
+ 111 = /dev/usb/hiddev15 16th USB HID device
+ 112 = /dev/usb/auer0 1st auerswald ISDN device
+ ...
+ 127 = /dev/usb/auer15 16th auerswald ISDN device
+ 128 = /dev/usb/brlvgr0 First Braille Voyager device
+ ...
+ 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
+ 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
+ 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
+ ...
+ 140 = /dev/usb/sisusbvga8 Eigth SISUSB VGA device
+ 144 = /dev/usb/lcd USB LCD device
+ 160 = /dev/usb/legousbtower0 1st USB Legotower device
+ ...
+ 175 = /dev/usb/legousbtower15 16th USB Legotower device
+ 240 = /dev/usb/dabusb0 First daubusb device
+ ...
+ 243 = /dev/usb/dabusb3 Fourth dabusb device
+180 block USB block devices
+ 0 = /dev/uba First USB block device
+ 8 = /dev/ubb Second USB block device
+ 16 = /dev/ubc Third USB block device
+ ...
181 char Conrad Electronic parallel port radio clocks
0 = /dev/pcfclock0 First Conrad radio clock
1 = /dev/cpu/1/msr MSRs on CPU 1
...
+202 block Xen Virtual Block Device
+ 0 = /dev/xvda First Xen VBD whole disk
+ 16 = /dev/xvdb Second Xen VBD whole disk
+ 32 = /dev/xvdc Third Xen VBD whole disk
+ ...
+ 240 = /dev/xvdp Sixteenth Xen VBD whole disk
+
+ Partitions are handled in the same way as for IDE
+ disks (see major number 3) except that the limit on
+ partitions is 15.
+
203 char CPU CPUID information
0 = /dev/cpu/0/cpuid CPUID on CPU 0
1 = /dev/cpu/1/cpuid CPUID on CPU 1
43 = /dev/ttySMX2 Motorola i.MX - port 2
44 = /dev/ttyMM0 Marvell MPSC - port 0
45 = /dev/ttyMM1 Marvell MPSC - port 1
+ 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
+ ...
+ 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
+ 50 = /dev/ttyIOC0 Altix serial card
+ ...
+ 81 = /dev/ttyIOC31 Altix serial card
+ 82 = /dev/ttyVR0 NEC VR4100 series SIU
+ 83 = /dev/ttyVR1 NEC VR4100 series DSIU
+ 84 = /dev/ttyIOC84 Altix ioc4 serial card
+ ...
+ 115 = /dev/ttyIOC115 Altix ioc4 serial card
+ 116 = /dev/ttySIOC0 Altix ioc3 serial card
+ ...
+ 147 = /dev/ttySIOC31 Altix ioc3 serial card
+ 148 = /dev/ttyPSC0 PPC PSC - port 0
+ ...
+ 153 = /dev/ttyPSC5 PPC PSC - port 5
+ 154 = /dev/ttyAT0 ATMEL serial port 0
+ ...
+ 169 = /dev/ttyAT15 ATMEL serial port 15
+ 170 = /dev/ttyNX0 Hilscher netX serial port 0
+ ...
+ 185 = /dev/ttyNX15 Hilscher netX serial port 15
+ 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
205 char Low-density serial ports (alternate device)
0 = /dev/culu0 Callout device for ttyLU0
...
39 = /dev/cudb7 Callout device for ttyDB7
40 = /dev/cusg0 Callout device for ttySG0
- 41 = /dev/ttySMX0 Callout device for ttySMX0
- 42 = /dev/ttySMX1 Callout device for ttySMX1
- 43 = /dev/ttySMX2 Callout device for ttySMX2
+ 41 = /dev/ttycusmx0 Callout device for ttySMX0
+ 42 = /dev/ttycusmx1 Callout device for ttySMX1
+ 43 = /dev/ttycusmx2 Callout device for ttySMX2
+ 46 = /dev/cucpm0 Callout device for ttyCPM0
+ ...
+ 49 = /dev/cucpm5 Callout device for ttyCPM5
+ 50 = /dev/cuioc40 Callout device for ttyIOC40
+ ...
+ 81 = /dev/cuioc431 Callout device for ttyIOC431
+ 82 = /dev/cuvr0 Callout device for ttyVR0
+ 83 = /dev/cuvr1 Callout device for ttyVR1
+
206 char OnStream SC-x0 tape devices
0 = /dev/osst0 First OnStream SCSI tape, mode 0
...
196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
-
-216 char USB BlueTooth devices
- 0 = /dev/ttyUB0 First USB BlueTooth device
- 1 = /dev/ttyUB1 Second USB BlueTooth device
+216 char Bluetooth RFCOMM TTY devices
+ 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
+ 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
...
-217 char USB BlueTooth devices (alternate devices)
- 0 = /dev/cuub0 Callout device for ttyUB0
- 1 = /dev/cuub1 Callout device for ttyUB1
+217 char Bluetooth RFCOMM TTY devices (alternate devices)
+ 0 = /dev/curf0 Callout device for rfcomm0
+ 1 = /dev/curf1 Callout device for rfcomm1
...
218 char The Logical Company bus Unibus/Qbus adapters
ioctl()'s can be used to rewind the tape regardless of
the device used to access it.
-231-239 UNASSIGNED
+231 char InfiniBand
+ 0 = /dev/infiniband/umad0
+ 1 = /dev/infiniband/umad1
+ ...
+ 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
+ 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
+ 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
+ ...
+ 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
+ 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
+ 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
+ ...
+ 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
+
+232 char Biometric Devices
+ 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
+ 1 = /dev/biometric/sensor0/iris first iris sensor on first device
+ 2 = /dev/biometric/sensor0/retina first retina sensor on first device
+ 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
+ 4 = /dev/biometric/sensor0/facial first facial sensor on first device
+ 5 = /dev/biometric/sensor0/hand first hand sensor on first device
+ ...
+ 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
+ ...
+ 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
+ ...
+
+233 char PathScale InfiniPath interconnect
+ 0 = /dev/ipath Primary device for programs (any unit)
+ 1 = /dev/ipath0 Access specifically to unit 0
+ 2 = /dev/ipath1 Access specifically to unit 1
+ ...
+ 4 = /dev/ipath3 Access specifically to unit 3
+ 129 = /dev/ipath_sma Device used by Subnet Management Agent
+ 130 = /dev/ipath_diag Device used by diagnostics programs
+
+234-239 UNASSIGNED
240-254 char LOCAL/EXPERIMENTAL USE
240-254 block LOCAL/EXPERIMENTAL USE
This major is reserved to assist the expansion to a
larger number space. No device nodes with this major
should ever be created on the filesystem.
+ (This is probaly not true anymore, but I'll leave it
+ for now /Torben)
+
+---LARGE MAJORS!!!!!---
+
+256 char Equinox SST multi-port serial boards
+ 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
+ 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
+ 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
+ ...
+ 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
+
+256 block Resident Flash Disk Flash Translation Layer
+ 0 = /dev/rfda First RFD FTL layer
+ 16 = /dev/rfdb Second RFD FTL layer
+ ...
+ 240 = /dev/rfdp 16th RFD FTL layer
+
+257 char Phoenix Technologies Cryptographic Services Driver
+ 0 = /dev/ptlsec Crypto Services Driver
+
+
**** ADDITIONAL /dev DIRECTORY ENTRIES