#
# (*) packages are named upon the RPM name; they are mostly lowercase
# Add a package to ALL if you want it built as part of the default set.
-# (*) modules are named after the subversion tree; as of this writing their names
-# are mostly mixed case like MyPLC or VserverReference
-# (this is something we'll fix while moving to git)
+# (*) modules are named after the subversion or git tree; we would wish to keep
+# these names lowercase as far as possible
# (*) rpms are named in the spec files. A package typically defines several rpms;
# rpms are used for defining DEPEND-DEVEL-RPMS. See also package.rpmnames
#
+# in simple cases, one package uses one module (in which case using the same name sounds right)
+# but others might need several modules (e.g. image-creation packages like bootstrapfs need
+# bootstrapfs and build); in this case the FIRST ONE is used for locating the specfile
+#
#################### packages
-# basics: how to build a package - you need/may define the following variables
+# basics: how to build a package - you need to define the following variables
#
# (*) package-MODULES
-# a package needs one or several modules to build.
-# to this end, define
+# a package needs one or several modules to build; the first one is used for
+# some special purposes, like locating the specfile
# (*) package-SPEC
# the package's specfile; this is relative to the FIRST module in package-MODULES
#
# Optional:
#
-# (*) package-SPECVARS
-# space-separated list of spec variable definitions, where you can reference make variable that relate to
-# packages defined BEFORE the current one (note: you should use = - as opposed to := - to define these)
-# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
-# would let you use the %release from the kernel's package when rpmbuild'ing mydriver - see automatic below
# (*) package-DEPEND-PACKAGES
-# a set of *packages* that this package depends on
+# a set of (obviously local) *packages* that this package depends on, e.g.
+# bootstrapfs-DEPEND-PACKAGES += kernel
+# this impacts the order of the build
+# (*) package-DEVEL-RPMS
+# a set of stock rpms that this package needs at build-time
+# this can also be set in config.<distro>/devel.pkgs or config.planetlab/devel.pkgs as appropriate
+# (*) package-EXCLUDE-DEVEL-RPMS
+# a set of stock *rpms* that the build will rpm-uninstall before building <package>
+# this is intended to denote stock rpms, and the build will attempt to yum-install them
+# back after the package is rebuilt
+# This feature is not used at the moment and kept only just in case
# (*) package-DEPEND-DEVEL-RPMS
-# a set of *rpms* that the build will rpm-install before building <package>
+# a set of local *rpms* that the build will rpm-install before building <package>
# the build will attempt to uninstall those once the package is built, this is not fatal though
# this is intended to denote local rpms, i.e. ones that are results of our own build
-# stock rpms should be mentioned in config.planetlab/devel.pkgs
+# stock rpms should be mentioned in DEVEL-RPMS or in devel.pkgs as described above
# (*) package-DEPEND-FILES
# a set of files that the package depends on - and that make needs to know about
# if this contains RPMS/yumgroups.xml, then the toplevel RPMS's index
# is refreshed with createrepo prior to running rpmbuild
-# (*) package-EXCLUDE-DEVEL-RPMS
-# a set of *rpms* that the build will rpm-uninstall before building <package>
-# this is intended to denote stock rpms, and the build will attempt to yum-install them
-# back after the package is rebuilt
+# (*) package-SPECVARS
+# space-separated list of spec variable definitions, where you can reference make variables that
+# belong to packages defined BEFORE the current one
+# note: you should use = to define these (as opposed to :=)
+# e.g. mydriver-SPECVARS = foo=$(kernel-rpm-release)
+# would let you use the %release from the kernel's package when rpmbuild'ing mydriver
+# see automatic below
# (*) package-RPMFLAGS: Miscellaneous RPM flags
-# (*) package-RPMBUILD: If not rpmbuild - mostly used for sudo'ing rpmbuild
-# (*) package-BUILD-FROM-SRPM: set this to any non-empty value, if your package is able to produce
-# a source rpms by running 'make srpm'
+# this is passed to rpmbuild, as well as to spec2make for "exporting" various rpm variable
+# to make; beware that some features, like --with=debug or --define 'foo bar' are not
+# well handled by spec2make as of this writing, which can cause issues.
+# hopefully this will be fixed...
+# (*) package-BUILD-FROM-SRPM: set this to any non-empty value,
+# if your package is able to produce a source rpm.
+# In this case the build will first invoke 'make srpm', and then rebuild binaries from that
# (*) package-RPMDATE: set this to any non-empty value to get the rpm package's release field hold the current date
# this is useful for container packages, like e.g. bootstrapfs or vserver, that contains much more than the
# correspondng module
#################### automatic variables
#
# the build defines some make variables that are extracted from spec files
-# see for example
+# to inspect those, see for example
# (*) $ make ulogd-pkginfo
# to see the list f variables attached to a given package
# (*) $ make kernel-devel-rpminfo
RPM-UNINSTALL-DEVEL := rpm -e
YUM-INSTALL-DEVEL := yum -y install
-# see also below
-REMOTE-PLDISTROS="wextoolbox"
-
#################### Makefile
# Default target
all:
endif
endif
-####################
+#################### pldistros that are defined remotely
+# fetching with svn
+define remote_pldistro_fetch_svn
+$(1).config.SVNPATH := $(shell grep -v "^#" config.$(1).svnpath)
+config.$(1): config.$(1).svnpath
+ @echo "Fetching (svn) details for remote pldistro $(1)"
+ svn export $$($(1).config.SVNPATH) config.$(1)
+endef
+
+FOO=@
+# fetching with git
+define remote_pldistro_fetch_git
+$(1).config.GITPATH := $(shell grep -v "^#" config.$(1).gitpath)
+$(1).config.gitrepo := $$(firstword $$(subst @, ,$$($(1).config.GITPATH)))
+$(1).config.gittag := $$(word 2,$$(subst @, ,$$($(1).config.GITPATH)))
+$(1).config.gittag := $$(if $$($(1).config.gittag),$$($(1).config.gittag),master)
+config.$(1): GITPATH=$(shell grep -v "^#" config.$(1).gitpath)
+config.$(1): config.$(1).gitpath
+ @echo "Fetching (git) details for remote pldistro $(1)"
+ mkdir -p config.$(1)
+ git $(GITTAG) archive --remote=$$($(1).config.gitrepo) $$($(1).config.gittag) | tar -C config.$(1) -xf -
+endef
+
+
+# put it together
define remote_pldistro
$(1).mk: config.$(1)/$(1).mk
- @echo 'creating $(1) from config subdir'
+ @echo 'creating $(1) from config.$(1)'
cp config.$(1)/$(1).mk $(1).mk
$(2).mk: config.$(1)/$(2).mk
- @echo 'creating $(1) tags from config subdir'
+ @echo 'creating $(2) tags from config.$(1)'
cp config.$(1)/$(2).mk $(2).mk
config.$(1)/$(1).mk: config.$(1)
config.$(1)/$(2).mk: config.$(1)
-config.$(1): config.$(1).svnpath
- @echo "Fetching details for pldistro $(1)"
- svn export $(shell grep -v "^#" config.$(1).svnpath) config.$(1)
-
DISTCLEANS += $(1).mk $(2).mk config.$(1)
-
+$(eval $(call remote_pldistro_fetch_$(3),$(1)))
endef
-# somehow this does not work, handle manually instead
-#$(foreach distro, $(REMOTE-PLDISTROS), $(eval $(call remote_pldistro,$(distro),$(distro)-tags)))
-$(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags))
+$(eval $(call remote_pldistro,wextoolbox,wextoolbox-tags,git))
########## stage1 and stage1iter
# extract specs and compute .mk files by running
define stage1_package_vars
$(1).module := $(firstword $($(1)-MODULES))
$(1).specpath := SPECS/$(notdir $($(1)-SPEC))
-$(1).moduledir := MODULES/$(firstword $($(1)-MODULES))
-$(1).codespec := MODULES/$(firstword $($(1)-MODULES))/$($(1)-SPEC)
+$(1).moduledir := MODULES/$$($(1).module)
+$(1).codespec := MODULES/$$($(1).module)/$($(1)-SPEC)
+$(1).spec2makeflags := $(if $($(1)-WHITELIST-RPMS),--whitelist-rpms $($(1)-WHITELIST-RPMS),)
endef
$(foreach package, $(ALL), $(eval $(call stage1_package_vars,$(package))))
define stage1_module_vars
ifneq "$($(1)-SVNPATH)" ""
$(1)-SVNPATH := $(strip $($(1)-SVNPATH))
+$(1)-SCMPATH := $(strip $($(1)-SVNPATH))
else
-$(1)-GITPATH := $(strip $($(1)-GITPATH))
-$(1).gitrepo := $(firstword $(subst @, ,$($(1)-GITPATH)))
-$(1).gittag := $(word 2,$(subst @, ,$($(1)-GITPATH)))
-$(1).gittag := $(if $($(1).gittag),$($(1).gittag),master)
+$(1)-GITPATH := $$(strip $$($(1)-GITPATH))
+$(1)-SCMPATH := $$(strip $$($(1)-GITPATH))
+$(1).gitrepo := $$(firstword $$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(word 2,$$(subst @, ,$$($(1)-GITPATH)))
+$(1).gittag := $$(if $$($(1).gittag),$$($(1).gittag),master)
endif
endef
$($(1).specpath): header.spec $($(1).codespec)
mkdir -p SPECS
cat header.spec > $($(1).specpath)
+ echo "%define SCMURL $($($(1).module)-SCMPATH)" >> $($(1).specpath)
$(if $($(1).has-date),echo "%define date $(shell date +%Y.%m.%d)" >> $($(1).specpath),)
$(if $($(1)-SPECVARS), \
$(foreach line,$($(1)-SPECVARS), \
### this utility allows to extract various info from a spec file
### and to define them in makefiles
spec2make: spec2make.c
- $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild
+ $(CC) -g -Wall $< -o $@ -lrpm -lrpmbuild -lrpmio -lpopt
### run spec2make on the spec file and include the result
# usage: spec2make package
+# with old rpms (f8&c5) and too recent specfiles (the kernel), we need a patch to spec2make
+# so when <package-NEEDSPECK2MAKEHACK is set, we run spec2make with the --hack flag
define target_mk
MAKE/$(1).mk: $($(1).specpath) spec2make .rpmmacros
mkdir -p MAKE
- ./spec2make $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
+ ./spec2make $($(1).spec2makeflags) $($(1)-RPMFLAGS) $($(1).specpath) $(1) > MAKE/$(1).mk || { rm MAKE/$(1).mk; exit 1; }
endef
$(foreach package,$(ALL),$(eval $(call target_mk,$(package))))
define stage2_variables
### devel dependencies
-$(1).rpmbuild = $(if $($(1)-RPMBUILD),$($(1)-RPMBUILD),$(RPMBUILD)) $($(1)-RPMFLAGS)
+$(1).rpmbuild = $(RPMBUILD) $($(1)-RPMFLAGS)
$(1).all-devel-rpm-paths := $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).rpm-path))
$(1).depend-devel-packages := $(sort $(foreach rpm,$($(1)-DEPEND-DEVEL-RPMS),$($(rpm).package)))
ALL-DEVEL-RPMS += $($(1)-DEPEND-DEVEL-RPMS)
@echo $(words $(ALLSRPMS)) source rpms OK
.PHONY: srpms
+
+# install the DEVEL-RPMS rpms if defined
+define handle_stock_devel_rpms_pre
+ $(if $($(1)-DEVEL-RPMS), echo "Installing for $(1)-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-DEVEL-RPMS))
+endef
+
### these macro handles the DEPEND-DEVEL-RPMS and EXCLUDE-DEVEL-RPMS tags for a hiven package
# before building : rpm-install DEPEND-DEVEL-RPMS and rpm-uninstall EXCLUDE
-define handle_devel_rpms_pre
+define handle_local_devel_rpms_pre
$(if $($(1).all-devel-rpm-paths), echo "Installing for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-INSTALL-DEVEL) $($(1).all-devel-rpm-paths))
$(if $($(1)-EXCLUDE-DEVEL-RPMS), echo "Uninstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS))
endef
-define handle_devel_rpms_post
+define handle_local_devel_rpms_post
-$(if $($(1)-DEPEND-DEVEL-RPMS), echo "Unstalling for $(1)-DEPEND-DEVEL-RPMS" ; $(RPM-UNINSTALL-DEVEL) $($(1)-DEPEND-DEVEL-RPMS))
$(if $($(1)-EXCLUDE-DEVEL-RPMS), "Reinstalling for $(1)-EXCLUDE-DEVEL-RPMS" ; $(YUM-INSTALL-DEVEL) $($(1)-EXCLUDE-DEVEL-RPMS) )
endef
$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).tarballs)
mkdir -p BUILD SRPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using SOURCES) " ; date)
- $(call handle_devel_rpms_pre,$(1))
+ $(call handle_stock_devel_rpms_pre,$(1))
+ $(call handle_local_devel_rpms_pre,$(1))
$($(1).rpmbuild) -bs $($(1).specpath)
- $(call handle_devel_rpms_post,$(1))
+ $(call handle_local_devel_rpms_post,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
else
$($(1).srpm): $($(1).specpath) .rpmmacros $($(1).source)
mkdir -p BUILD SRPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG SRPM $(1) (using make srpm) " ; date)
- $(call handle_devel_rpms_pre,$(1))
+ $(call handle_stock_devel_rpms_pre,$(1))
+ $(call handle_local_devel_rpms_pre,$(1))
make -C $($(1).source) srpm SPECFILE=$(HOME)/$($(1).specpath) EXPECTED_SRPM=$(notdir $($(1).srpm)) && \
rm -f SRPMS/$(notdir $($(1).srpm)) && \
ln $($(1).source)/$(notdir $($(1).srpm)) SRPMS/$(notdir $($(1).srpm))
- $(call handle_devel_rpms_post,$(1))
+ $(call handle_local_devel_rpms_post,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END SRPM $(1) " ; date)
endif
endef
mkdir -p RPMS tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG RPM $(1) " ; date)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
- $(call handle_devel_rpms_pre,$(1))
+ $(call handle_stock_devel_rpms_pre,$(1))
+ $(call handle_local_devel_rpms_pre,$(1))
$($(1).rpmbuild) --rebuild $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(call handle_devel_rpms_post,$(1))
+ $(call handle_local_devel_rpms_post,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END RPM $(1) " ; date)
# for manual use only - in case we need to investigate the results of an rpmbuild
$(1)-compile: $($(1).srpm)
mkdir -p COMPILE tmp
@(echo -n "XXXXXXXXXXXXXXX -- BEG compile $(1) " ; date)
$(if $(findstring RPMS/yumgroups.xml,$($(1)-DEPEND-FILES)), $(createrepo) , )
- $(call handle_devel_rpms_pre,$(1))
+ $(call handle_stock_devel_rpms_pre,$(1))
+ $(call handle_local_devel_rpms_pre,$(1))
$($(1).rpmbuild) --recompile $(RPM-USE-TMP-DIRS) $($(1).srpm)
- $(call handle_devel_rpms_post,$(1))
+ $(call handle_local_devel_rpms_post,$(1))
@(echo -n "XXXXXXXXXXXXXXX -- END compile $(1) " ; date)
.PHONY: $(1)-compile
endef
@echo "Build build-base: $(BASE)"
@echo "Build planetlab-distro: $(PLDISTRO)"
@echo "Build planetlab-tags: $(PLDISTROTAGS)"
- @echo -n 'Build planetlab-tagsid: ' ; fgrep '$$''Id' $(PLDISTROTAGS)
@echo "Build target-arch: $(HOSTARCH)"
@echo "Build target-distro: $(DISTRO)"
@echo "Build target-distroname: $(DISTRONAME)"
module-tools:
@$(foreach module,$(ALL.modules), \
- $(if $($(module)-GITPATH), \
+ $(if $($(module)-GITPATH), \
$(if $($(module)-BRANCH), \
- echo git:$(module):$($(module)-BRANCH); , \
- echo git:$(module); ), \
+ echo $(module):$($(module)-BRANCH); , \
+ echo $(module); ), \
$(if $($(module)-BRANCH), \
echo $(module):$($(module)-BRANCH); , \
echo $(module); )))
.PHONY: info info-packages info-modules info-branches module-tools
+show-multi-modules:
+ @$(foreach package,$(ALL),$(if $(subst x1,,x$(words $($(package)-MODULES))), echo p=$(package) mods=$($(package)-MODULES) ;))
+.PHONY: show-multi-modules
####################
help:
@echo "********** Run make in two stages:"