--- /dev/null
+/*
+ * arch/ppc/platforms/85xx/stx_gp3.c
+ *
+ * STx GP3 board specific routines
+ *
+ * Dan Malek <dan@embeddededge.com>
+ * Copyright 2004 Embedded Edge, LLC
+ *
+ * Copied from mpc8560_ads.c
+ * Copyright 2002, 2003 Motorola Inc.
+ *
+ * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/root_dev.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc85xx.h>
+#include <asm/ppc_sys.h>
+
+#include <syslib/cpm2_pic.h>
+#include <syslib/ppc85xx_common.h>
+
+extern void cpm2_reset(void);
+
+unsigned char __res[sizeof(bd_t)];
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+static u8 gp3_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ 0x0, /* External 0: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
+#else
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+#endif
+ 0x0, /* External 5: */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init
+gp3_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ cpm2_reset();
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("gp3_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 2;
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 4;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base);
+}
+
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+{
+ while ((irq = cpm2_get_irq(regs)) >= 0)
+ __do_IRQ(irq, regs);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+
+static void __init
+gp3_init_IRQ(void)
+{
+ int i;
+ volatile cpm2_map_t *immap = cpm2_immr;
+ bd_t *binfo = (bd_t *) __res;
+
+ /*
+ * Setup OpenPIC
+ */
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = gp3_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /*
+ * Let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+ /*
+ * Setup CPM2 PIC
+ */
+
+ /* disable all CPM interupts */
+ immap->im_intctl.ic_simrh = 0x0;
+ immap->im_intctl.ic_simrl = 0x0;
+
+ for (i = CPM_IRQ_OFFSET; i < (NR_CPM_INTS + CPM_IRQ_OFFSET); i++)
+ irq_desc[i].handler = &cpm2_pic;
+
+ /*
+ * Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ immap->im_intctl.ic_sicr = 0;
+ immap->im_intctl.ic_scprrh = 0x05309770;
+ immap->im_intctl.ic_scprrl = 0x05309770;
+
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
+
+ return;
+}
+
+static int
+gp3_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ bd_t *binfo = (bd_t *) __res;
+ uint memsize;
+ unsigned int freq;
+ extern unsigned long total_memory; /* in mm/init */
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(PVR);
+ svid = mfspr(SVR);
+
+ memsize = total_memory;
+
+ seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
+
+ switch (svid & 0xffff0000) {
+ case SVR_8540:
+ seq_printf(m, "Machine\t\t: GP3 - MPC8540\n");
+ break;
+ case SVR_8560:
+ seq_printf(m, "Machine\t\t: GP3 - MPC8560\n");
+ break;
+ default:
+ seq_printf(m, "Machine\t\t: unknown\n");
+ break;
+ }
+ seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
+ freq % 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD},
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA},
+ };
+
+ const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+
+ }
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = gp3_setup_arch;
+ ppc_md.show_cpuinfo = gp3_show_cpuinfo;
+
+ ppc_md.init_IRQ = gp3_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+ if (ppc_md.progress)
+ ppc_md.progress("platform_init(): exit", 0);
+
+ return;
+}
git://git.onelab.eu / linux-2.6.git / blobdiff