+++ /dev/null
-#!/usr/bin/python
-#
-# TEMPORARY
-# this file historically came with util-vserver-pl which is not available
-# on lxc-powered nodes
-# it is thus intended to become packaged separately at some point
-#
-# It was renamed into bwlimitlxc so that this branch can be tested on
-# vserver nodes as well
-# TEMPORARY
-
-#
-# Bandwidth limit module for PlanetLab nodes. The intent is to use the
-# Hierarchical Token Bucket (HTB) queueing discipline (qdisc) to allow
-# slices to fairly share access to available node bandwidth. We
-# currently define three classes of "available node bandwidth":
-#
-# 1. Available hardware bandwidth (bwmax): The maximum rate of the
-# hardware.
-#
-# 2. Available capped bandwidth (bwcap): The maximum rate allowed to
-# non-exempt destinations. By default, equal to bwmax, but may be
-# lowered by PIs.
-#
-# 3. Available uncapped ("exempt") bandwidth: The difference between
-# bwmax and what is currently being used of bwcap, or the maximum rate
-# allowed to destinations exempt from caps (e.g., Internet2).
-#
-# All three classes of bandwidth are fairly shared according to the
-# notion of "shares". For instance, if the node is capped at 5 Mbps,
-# there are N slices, and each slice has 1 share, then each slice
-# should get at least 5/N Mbps of bandwidth. How HTB is implemented
-# makes this statement a little too simplistic. What it really means
-# is that during any single time period, only a certain number of
-# bytes can be sent onto the wire. Each slice is guaranteed that at
-# least some small number of its bytes will be sent. Whatever is left
-# over from the budget, is split in proportion to the number of shares
-# each slice has.
-#
-# Even if the node is not capped at a particular limit (bwcap ==
-# bwmax), this module enforces fair share access to bwmax. Also, if
-# the node is capped at a particular limit, rules may optionally be
-# defined that classify certain packets into the "exempt" class. This
-# class receives whatever bandwidth is leftover between bwcap and
-# bwmax; slices fairly share this bandwidth as well.
-#
-# The root context is exempt from sharing and can send as much as it
-# needs to.
-#
-# Some relevant URLs:
-#
-# 1. http://lartc.org/howto for how to use tc
-# 2. http://luxik.cdi.cz/~devik/qos/htb/ for info on HTB
-#
-# Andy Bavier <acb@cs.princeton.edu>
-# Mark Huang <mlhuang@cs.princeton.edu>
-# Copyright (C) 2006 The Trustees of Princeton University
-#
-
-import sys, os, re, getopt
-import pwd
-
-
-# Where the tc binary lives
-TC = "/sbin/tc"
-
-# Where the ebtables binary lives
-EBTABLES = "/sbin/ebtables"
-
-# Default interface
-dev = "eth0"
-
-# Verbosity level
-verbose = 0
-
-# bwmin should be small enough that it can be considered negligibly
-# slow compared to the hardware. 8 bits/second appears to be the
-# smallest value supported by tc.
-bwmin = 1000
-
-# bwmax should be large enough that it can be considered at least as
-# fast as the hardware.
-bwmax = 1000*1000*1000
-
-# quantum is the maximum number of bytes that can be borrowed by a
-# share (or slice, if each slice gets 1 share) in one time period
-# (with HZ=1000, 1 ms). If multiple slices are competing for bandwidth
-# above their guarantees, and each is attempting to borrow up to the
-# node bandwidth cap, quantums control how the excess bandwidth is
-# distributed. Slices with 2 shares will borrow twice the amount in
-# one time period as slices with 1 share, so averaged over time, they
-# will get twice as much of the excess bandwidth. The value should be
-# as small as possible and at least 1 MTU. By default, it would be
-# calculated as bwmin/10, but since we use such small a value for
-# bwmin, it's better to just set it to a value safely above 1 Ethernet
-# MTU.
-quantum = 1600
-
-# cburst is the maximum number of bytes that can be burst onto the
-# wire in one time period (with HZ=1000, 1 ms). If multiple slices
-# have data queued for transmission, cbursts control how long each
-# slice can have the wire for. If not specified, it is set to the
-# smallest possible value that would enable the slice's "ceil" rate
-# (usually the node bandwidth cap), to be reached if a slice was able
-# to borrow enough bandwidth to do so. For now, it's unclear how or if
-# to relate this to the notion of shares, so just let tc set the
-# default.
-cburst = None
-
-# There is another parameter that controls how bandwidth is allocated
-# between slices on nodes that is outside the scope of HTB. We enforce
-# a 16 GByte/day total limit on each slice, which works out to about
-# 1.5mbit. If a slice exceeds this byte limit before the day finishes,
-# it is capped at (i.e., its "ceil" rate is set to) the smaller of the
-# node bandwidth cap or 1.5mbit. pl_mom is in charge of enforcing this
-# rule and executes this script to override "ceil".
-
-# We support multiple bandwidth limits, by reserving the top nibble of
-# the minor classid to be the "subclassid". Theoretically, we could
-# support up to 15 subclasses, but for now, we only define two: the
-# "default" subclass 1:10 that is capped at the node bandwidth cap (in
-# this example, 5mbit) and the "exempt" subclass 1:20 that is capped
-# at bwmax (i.e., not capped). The 1:1 parent class exists only to
-# make the borrowing model work. All bandwidth above minimum
-# guarantees is fairly shared (in this example, slice 2 is guaranteed
-# at least 1mbit in addition to fair access to the rest), subject to
-# the restrictions of the class hierarchy: namely, that the total
-# bandwidth to non-exempt destinations should not exceed the node
-# bandwidth cap.
-#
-# 1:
-# |
-# 1:1 (1gbit)
-# ______________|_____________
-# | |
-# 1:10 (8bit, 5mbit) 1:20 (8bit, 1gbit)
-# | |
-# 1:100 (8bit, 5mbit) |
-# | |
-# 1:1000 (8bit, 5mbit), 1:2000 (8bit, 1gbit),
-# 1:1001 (8bit, 5mbit), 1:2001 (8bit, 1gbit),
-# 1:1002 (1mbit, 5mbit), 1:2002 (1mbit, 1gbit),
-# ... ...
-# 1:1FFF (8bit, 5mbit) 1:2FFF (8bit, 1gbit)
-#
-default_minor = 0x1000
-exempt_minor = 0x2000
-
-# root_xid is for the root context. The root context is exempt from
-# fair sharing in both the default and exempt subclasses. The root
-# context gets 5 shares by default.
-root_xid = 0x0000
-root_share = 5
-
-# default_xid is for unclassifiable packets. Packets should not be
-# classified here very often. They can be if a slice's HTB classes are
-# deleted before its processes are. Each slice gets 1 share by
-# default.
-default_xid = 0x0FFF
-default_share = 1
-
-# See tc_util.c and http://physics.nist.gov/cuu/Units/binary.html. Be
-# warned that older versions of tc interpret "kbps", "mbps", "mbit",
-# and "kbit" to mean (in this system) "kibps", "mibps", "mibit", and
-# "kibit" and that if an older version is installed, all rates will
-# be off by a small fraction.
-suffixes = {
- "": 1,
- "bit": 1,
- "kibit": 1024,
- "kbit": 1000,
- "mibit": 1024*1024,
- "mbit": 1000000,
- "gibit": 1024*1024*1024,
- "gbit": 1000000000,
- "tibit": 1024*1024*1024*1024,
- "tbit": 1000000000000,
- "bps": 8,
- "kibps": 8*1024,
- "kbps": 8000,
- "mibps": 8*1024*1024,
- "mbps": 8000000,
- "gibps": 8*1024*1024*1024,
- "gbps": 8000000000,
- "tibps": 8*1024*1024*1024*1024,
- "tbps": 8000000000000
-}
-
-
-def get_tc_rate(s):
- """
- Parses an integer or a tc rate string (e.g., 1.5mbit) into bits/second
- """
-
- if type(s) == int:
- return s
- m = re.match(r"([0-9.]+)(\D*)", s)
- if m is None:
- return -1
- suffix = m.group(2).lower()
- if suffixes.has_key(suffix):
- return int(float(m.group(1)) * suffixes[suffix])
- else:
- return -1
-
-def format_bytes(bytes, si = True):
- """
- Formats bytes into a string
- """
- if si:
- kilo = 1000.
- else:
- # Officially, a kibibyte
- kilo = 1024.
-
- if bytes >= (kilo * kilo * kilo):
- return "%.1f GB" % (bytes / (kilo * kilo * kilo))
- elif bytes >= 1000000:
- return "%.1f MB" % (bytes / (kilo * kilo))
- elif bytes >= 1000:
- return "%.1f KB" % (bytes / kilo)
- else:
- return "%.0f bytes" % bytes
-
-def format_tc_rate(rate):
- """
- Formats a bits/second rate into a tc rate string
- """
-
- if rate >= 1000000000 and (rate % 1000000000) == 0:
- return "%.0fgbit" % (rate / 1000000000.)
- elif rate >= 1000000 and (rate % 1000000) == 0:
- return "%.0fmbit" % (rate / 1000000.)
- elif rate >= 1000:
- return "%.0fkbit" % (rate / 1000.)
- else:
- return "%.0fbit" % rate
-
-
-# Parse /etc/planetlab/bwcap (or equivalent)
-def read_bwcap(bwcap_file):
- bwcap = bwmax
- try:
- fp = open(bwcap_file, "r")
- line = fp.readline().strip()
- if line:
- bwcap = get_tc_rate(line)
- except:
- pass
- if bwcap == -1:
- bwcap = bwmax
- return bwcap
-
-
-def get_bwcap(dev = dev):
- """
- Get the current (live) value of the node bandwidth cap
- """
-
- state = tc("-d class show dev %s" % dev)
- base_re = re.compile(r"class htb 1:10 parent 1:1 .*ceil ([^ ]+) .*")
- base_classes = filter(None, map(base_re.match, state))
- if not base_classes:
- return -1
- if len(base_classes) > 1:
- raise Exception, "unable to get current bwcap"
- return get_tc_rate(base_classes[0].group(1))
-
-
-def get_slice(xid):
- """
- Get slice name ("princeton_mlh") from slice xid (500)
- """
-
- if xid == root_xid:
- return "root"
- if xid == default_xid:
- return "default"
- try:
- return pwd.getpwuid(xid).pw_name
- except KeyError:
- pass
-
- return None
-
-def get_xid(slice):
- """
- Get slice xid ("500") from slice name ("princeton_mlh")
- """
-
- if slice == "root":
- return root_xid
- if slice == "default":
- return default_xid
- try:
- try:
- return int(slice)
- except ValueError:
- pass
- return pwd.getpwnam(slice).pw_uid
- except KeyError:
- pass
-
- return None
-
-def run(cmd, input = None):
- """
- Shortcut for running a shell command
- """
-
- try:
- if verbose:
- sys.stderr.write("Executing: " + cmd + "\n")
- if input is None:
- fileobj = os.popen(cmd, "r")
- output = fileobj.readlines()
- else:
- fileobj = os.popen(cmd, "w")
- fileobj.write(input)
- output = None
- if fileobj.close() is None:
- return output
- except Exception, e:
- pass
- return None
-
-
-def tc(cmd):
- """
- Shortcut for running a tc command
- """
-
- return run(TC + " " + cmd)
-
-def ebtables(cmd):
- """
- Shortcut for running a ebtables command
- """
-
- return run(EBTABLES + " " + cmd)
-
-
-def stop(dev = dev):
- '''
- Turn off all queing. Stops all slice HTBS and reverts to pfifo_fast (the default).
- '''
- try:
- for i in range(0,2):
- tc("qdisc del dev %s root" % dev)
- except: pass
-
-
-def init(dev = dev, bwcap = bwmax):
- """
- (Re)initialize the bandwidth limits on this node
- """
-
- # Load the module used to manage exempt classes
- #run("/sbin/modprobe ip_set_iphash")
- # Test the new module included in kernel 3 series
- run("/sbin/modprobe ip_set_hash_ip")
-
- # Save current settings
- paramslist = get(None, dev)
-
- # Delete root qdisc 1: if it exists. This will also automatically
- # delete any child classes.
- for line in tc("qdisc show dev %s" % dev):
- # Search for the root qdisc 1:
- m = re.match(r"qdisc htb 1:", line)
- if m is not None:
- tc("qdisc del dev %s root handle 1:" % dev)
- break
-
- # Initialize HTB. The "default" clause specifies that if a packet
- # fails classification, it should go into the class with handle
- # 1FFF.
- tc("qdisc add dev %s root handle 1: htb default %x" % \
- (dev, default_minor | default_xid))
-
- # Set up a parent class from which all subclasses borrow.
- tc("class add dev %s parent 1: classid 1:1 htb rate %dbit" % \
- (dev, bwmax))
-
- # Set up a subclass that represents the node bandwidth cap. We
- # allow each slice to borrow up to this rate, so it is also
- # usually the "ceil" rate for each slice.
- tc("class add dev %s parent 1:1 classid 1:10 htb rate %dbit ceil %dbit" % \
- (dev, bwmin, bwcap))
-
- # Set up a subclass for DRL(Distributed Rate Limiting).
- # DRL will directly modify that subclass implementing the site limits.
- tc("class add dev %s parent 1:10 classid 1:100 htb rate %dbit ceil %dbit" % \
- (dev, bwmin, bwcap))
-
-
- # Set up a subclass that represents "exemption" from the node
- # bandwidth cap. Once the node bandwidth cap is reached, bandwidth
- # to exempt destinations can still be fairly shared up to bwmax.
- tc("class add dev %s parent 1:1 classid 1:20 htb rate %dbit ceil %dbit" % \
- (dev, bwmin, bwmax))
-
- # Set up the root class (and tell VNET what it is). Packets sent
- # by root end up here and are capped at the node bandwidth
- # cap.
- #on(root_xid, dev, share = root_share)
- #try:
- # file("/proc/sys/vnet/root_class", "w").write("%d" % ((1 << 16) | default_minor | root_xid))
- #except:
- # pass
-
- # Set up the default class. Packets that fail classification end
- # up here.
- on(default_xid, dev, share = default_share)
-
- # Restore old settings
- for (xid, share,
- minrate, maxrate,
- minexemptrate, maxexemptrate,
- bytes, exemptbytes) in paramslist:
- if xid not in (root_xid, default_xid):
- on(xid, dev, share, minrate, maxrate, minexemptrate, maxexemptrate)
-
-
-def get(xid = None, dev = dev):
- """
- Get the bandwidth limits and current byte totals for a
- particular slice xid as a tuple (xid, share, minrate, maxrate,
- minexemptrate, maxexemptrate, bytes, exemptbytes), or all classes
- as a list of such tuples.
- """
-
- if xid is None:
- ret = []
- else:
- ret = None
-
- rates = {}
- rate = None
-
- # ...
- # class htb 1:1000 parent 1:10 leaf 1000: prio 0 quantum 8000 rate 8bit ceil 10000Kbit ...
- # Sent 6851486 bytes 49244 pkt (dropped 0, overlimits 0 requeues 0)
- # ...
- # class htb 1:2000 parent 1:20 leaf 2000: prio 0 quantum 8000 rate 8bit ceil 1000Mbit ...
- # Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
- # ...
- for line in tc("-s -d class show dev %s" % dev):
- # Rate parameter line
- params = re.match(r"class htb 1:([0-9a-f]+) parent 1:(10|20)", line)
- # Statistics line
- stats = re.match(r".* Sent ([0-9]+) bytes", line)
- # Another class
- ignore = re.match(r"class htb", line)
-
- if params is not None:
- # Which class
- if params.group(2) == "10":
- min = 'min'
- max = 'max'
- bytes = 'bytes'
- else:
- min = 'minexempt'
- max = 'maxexempt'
- bytes = 'exemptbytes'
-
- # Slice ID
- id = int(params.group(1), 16) & 0x0FFF;
-
- if rates.has_key(id):
- rate = rates[id]
- else:
- rate = {'id': id}
-
- # Parse share
- rate['share'] = 1
- m = re.search(r"quantum (\d+)", line)
- if m is not None:
- rate['share'] = int(m.group(1)) / quantum
-
- # Parse minrate
- rate[min] = bwmin
- m = re.search(r"rate (\w+)", line)
- if m is not None:
- rate[min] = get_tc_rate(m.group(1))
-
- # Parse maxrate
- rate[max] = bwmax
- m = re.search(r"ceil (\w+)", line)
- if m is not None:
- rate[max] = get_tc_rate(m.group(1))
-
- # Which statistics to parse
- rate['stats'] = bytes
-
- rates[id] = rate
-
- elif stats is not None:
- if rate is not None:
- rate[rate['stats']] = int(stats.group(1))
-
- elif ignore is not None:
- rate = None
-
- # Keep parsing until we get everything
- if rate is not None and \
- rate.has_key('min') and rate.has_key('minexempt') and \
- rate.has_key('max') and rate.has_key('maxexempt') and \
- rate.has_key('bytes') and rate.has_key('exemptbytes'):
- params = (rate['id'], rate['share'],
- rate['min'], rate['max'],
- rate['minexempt'], rate['maxexempt'],
- rate['bytes'], rate['exemptbytes'])
- if xid is None:
- # Return a list of parameters
- ret.append(params)
- rate = None
- elif xid == rate['id']:
- # Return the parameters for this class
- ret = params
- break
-
- return ret
-
-
-def on(xid, dev = dev, share = None, minrate = None, maxrate = None, minexemptrate = None, maxexemptrate = None):
- """
- Apply specified bandwidth limit to the specified slice xid
- """
-
- # Get defaults from current state if available
- cap = get(xid, dev)
- if cap is not None:
- if share is None:
- share = cap[1]
- if minrate is None:
- minrate = cap[2]
- if maxrate is None:
- maxrate = cap[3]
- if minexemptrate is None:
- minexemptrate = cap[4]
- if maxexemptrate is None:
- maxexemptrate = cap[5]
-
- # Figure out what the current node bandwidth cap is
- bwcap = get_bwcap(dev)
-
- # Set defaults
- if share is None:
- share = default_share
- if minrate is None:
- minrate = bwmin
- else:
- minrate = get_tc_rate(minrate)
- if maxrate is None:
- maxrate = bwcap
- else:
- maxrate = get_tc_rate(maxrate)
- if minexemptrate is None:
- minexemptrate = minrate
- else:
- minexemptrate = get_tc_rate(minexemptrate)
- if maxexemptrate is None:
- maxexemptrate = bwmax
- else:
- maxexemptrate = get_tc_rate(maxexemptrate)
-
- # Sanity checks
- if maxrate < bwmin:
- maxrate = bwmin
- if maxrate > bwcap:
- maxrate = bwcap
- if minrate < bwmin:
- minrate = bwmin
- if minrate > maxrate:
- minrate = maxrate
- if maxexemptrate < bwmin:
- maxexemptrate = bwmin
- if maxexemptrate > bwmax:
- maxexemptrate = bwmax
- if minexemptrate < bwmin:
- minexemptrate = bwmin
- if minexemptrate > maxexemptrate:
- minexemptrate = maxexemptrate
-
- # Set up subclasses for the slice
- tc("class replace dev %s parent 1:100 classid 1:%x htb rate %dbit ceil %dbit quantum %d" % \
- (dev, default_minor | xid, minrate, maxrate, share * quantum))
-
- tc("class replace dev %s parent 1:20 classid 1:%x htb rate %dbit ceil %dbit quantum %d" % \
- (dev, exempt_minor | xid, minexemptrate, maxexemptrate, share * quantum))
-
- # Attach a FIFO to each subclass, which helps to throttle back
- # processes that are sending faster than the token buckets can
- # support.
- tc("qdisc replace dev %s parent 1:%x handle %x pfifo" % \
- (dev, default_minor | xid, default_minor | xid))
-
- tc("qdisc replace dev %s parent 1:%x handle %x pfifo" % \
- (dev, exempt_minor | xid, exempt_minor | xid))
-
- # Setup a filter rule to the root class so each packet originated by a
- # container interface is classified to it corresponding class
- # The handle number is a mark created by ebtables with the xid
- tc("filter replace dev %s parent 1: protocol ip prio 1 handle %d fw flowid 1:%x" % \
- (dev, xid, default_minor | xid))
-
-def set(xid, share = None, minrate = None, maxrate = None, minexemptrate = None, maxexemptrate = None, dev = dev ):
- on(xid = xid, dev = dev, share = share,
- minrate = minrate, maxrate = maxrate,
- minexemptrate = minexemptrate, maxexemptrate = maxexemptrate)
-
-
-# Remove class associated with specified slice xid. If further packets
-# are seen from this slice, they will be classified into the default
-# class 1:1FFF.
-def off(xid, dev = dev):
- """
- Remove class associated with specified slice xid. If further
- packets are seen from this slice, they will be classified into the
- default class 1:1FFF.
- """
-
- cap = get(xid, dev)
- if cap is not None:
- tc("class del dev %s classid 1:%x" % (dev, default_minor | xid))
- tc("class del dev %s classid 1:%x" % (dev, exempt_minor | xid))
-
-
-def exempt_init(group_name, node_ips):
- """
- Initialize the list of destinations exempt from the node bandwidth
- (burst) cap.
- """
-
- # Check of set exists
- set = run("/sbin/ipset -S " + group_name)
- if set == None:
- # Create a hashed IP set of all of these destinations
- lines = ["-N %s iphash" % group_name]
- add_cmd = "-A %s " % group_name
- lines += [(add_cmd + ip) for ip in node_ips]
- lines += ["COMMIT"]
- restore = "\n".join(lines) + "\n"
- run("/sbin/ipset -R", restore)
- else: # set exists
- # Check all hosts and add missing.
- for nodeip in node_ips:
- if not run("/sbin/ipset -T %s %s" % (group_name, nodeip)):
- run("/sbin/ipset -A %s %s" % (group_name, nodeip))
-
-
-def usage():
- bwcap_description = format_tc_rate(get_bwcap())
-
- print """
-Usage:
-
-%s [OPTION]... [COMMAND] [ARGUMENT]...
-
-Options:
- -d device Network interface (default: %s)
- -r rate Node bandwidth cap (default: %s)
- -q quantum Share multiplier (default: %d bytes)
- -n Print rates in numeric bits per second
- -v Enable verbose debug messages
- -h This message
-
-Commands:
- init
- (Re)initialize all bandwidth parameters
- on slice [share|-] [minrate|-] [maxrate|-] [minexemptrate|-] [maxexemptrate|-]
- Set bandwidth parameter(s) for the specified slice
- off slice
- Remove all bandwidth parameters for the specified slice
- get
- Get all bandwidth parameters for all slices
- get slice
- Get bandwidth parameters for the specified slice
-""" % (sys.argv[0], dev, bwcap_description, quantum)
- sys.exit(1)
-
-
-def main():
- global dev, quantum, verbose
-
- # Defaults
- numeric = False
- bwcap = None
-
- (opts, argv) = getopt.getopt(sys.argv[1:], "d:nr:q:vh")
- for (opt, optval) in opts:
- if opt == '-d':
- dev = optval
- elif opt == '-n':
- numeric = True
- elif opt == '-r':
- bwcap = get_tc_rate(optval)
- elif opt == '-q':
- quantum = int(optval)
- elif opt == '-v':
- verbose += 1
- elif opt == '-h':
- usage()
-
- if not bwcap:
- bwcap = get_bwcap(dev)
-
- if bwcap == -1:
- return 0
-
- if len(argv):
- if argv[0] == "init" or (argv[0] == "on" and len(argv) == 1):
- # (Re)initialize
- init(dev, get_tc_rate(bwcap))
-
- elif argv[0] == "get" or argv[0] == "show":
- # Show
- if len(argv) >= 2:
- # Show a particular slice
- xid = get_xid(argv[1])
- if xid is None:
- sys.stderr.write("Error: Invalid slice name or context '%s'\n" % argv[1])
- usage()
- params = get(xid, dev)
- if params is None:
- paramslist = []
- else:
- paramslist = [params]
- else:
- # Show all slices
- paramslist = get(None, dev)
-
- for (xid, share,
- minrate, maxrate,
- minexemptrate, maxexemptrate,
- bytes, exemptbytes) in paramslist:
- slice = get_slice(xid)
- if slice is None:
- # Orphaned (not associated with a slice) class
- slice = "%d?" % xid
- if numeric:
- print "%s %d %d %d %d %d %d %d" % \
- (slice, share,
- minrate, maxrate,
- minexemptrate, maxexemptrate,
- bytes, exemptbytes)
- else:
- print "%s %d %s %s %s %s %s %s" % \
- (slice, share,
- format_tc_rate(minrate), format_tc_rate(maxrate),
- format_tc_rate(minexemptrate), format_tc_rate(maxexemptrate),
- format_bytes(bytes), format_bytes(exemptbytes))
-
- elif len(argv) >= 2:
- # slice, ...
- xid = get_xid(argv[1])
- if xid is None:
- sys.stderr.write("Error: Invalid slice name or context '%s'\n" % argv[1])
- usage()
-
- if argv[0] == "on" or argv[0] == "add" or argv[0] == "replace" or argv[0] == "set":
- # Enable cap
- args = []
- if len(argv) >= 3:
- # ... share, minrate, maxrate, minexemptrate, maxexemptrate
- casts = [int, get_tc_rate, get_tc_rate, get_tc_rate, get_tc_rate]
- for i, arg in enumerate(argv[2:]):
- if i >= len(casts):
- break
- if arg == "-":
- args.append(None)
- else:
- args.append(casts[i](arg))
- on(xid, dev, *args)
-
- elif argv[0] == "off" or argv[0] == "del":
- # Disable cap
- off(xid, dev)
-
- else:
- usage()
-
- else:
- usage()
-
-
-if __name__ == '__main__':
- main()