--- /dev/null
+//----------------------------------------------------------------------------
+//
+// Copyright (C) Intel Corporation, 2004 - 2007
+//
+// File: StatusCodeDefinitions.h
+//
+// Notes: This file contains the definitions of the status codes
+// as defined in the Intel® AMT Network Design Guide.
+//
+//----------------------------------------------------------------------------
+
+#ifndef STATUS_CODE_DEFINITIONS_H
+#define STATUS_CODE_DEFINITIONS_H
+
+typedef unsigned int PT_STATUS;
+typedef unsigned int AMT_STATUS;
+
+//Request succeeded
+#define PT_STATUS_SUCCESS 0x0
+#define AMT_STATUS_SUCCESS 0x0
+
+//An internal error in the Intel® AMT device has occurred
+#define PT_STATUS_INTERNAL_ERROR 0x1
+#define AMT_STATUS_INTERNAL_ERROR 0x1
+
+//Intel® AMT device has not progressed far enough in its
+//initialization to process the command.
+#define PT_STATUS_NOT_READY 0x2
+#define AMT_STATUS_NOT_READY 0x2
+
+//Command is not permitted in current operating mode.
+#define PT_STATUS_INVALID_PT_MODE 0x3
+#define AMT_STATUS_INVALID_PT_MODE 0x3
+
+//Length field of header is invalid.
+#define PT_STATUS_INVALID_MESSAGE_LENGTH 0x4
+#define AMT_STATUS_INVALID_MESSAGE_LENGTH 0x4
+
+//The requested hardware asset inventory table
+//checksum is not available.
+#define PT_STATUS_TABLE_FINGERPRINT_NOT_AVAILABLE 0x5
+#define AMT_STATUS_TABLE_FINGERPRINT_NOT_AVAILABLE 0x5
+
+//The Integrity Check Value field of the request
+//message sent by Intel® AMT enabled device is invalid.
+#define PT_STATUS_INTEGRITY_CHECK_FAILED 0x6
+#define AMT_STATUS_INTEGRITY_CHECK_FAILED 0x6
+
+//The specified ISV version is not supported
+#define PT_STATUS_UNSUPPORTED_ISVS_VERSION 0x7
+#define AMT_STATUS_UNSUPPORTED_ISVS_VERSION 0x7
+
+//The specified queried application is not registered.
+#define PT_STATUS_APPLICATION_NOT_REGISTERED 0x8
+#define AMT_STATUS_APPLICATION_NOT_REGISTERED 0x8
+
+//Either an invalid name or a not previously registered
+//\93Enterprise\94 name was specified
+#define PT_STATUS_INVALID_REGISTRATION_DATA 0x9
+#define AMT_STATUS_INVALID_REGISTRATION_DATA 0x9
+
+//The application handle provided in the request
+//message has never been allocated.
+#define PT_STATUS_APPLICATION_DOES_NOT_EXIST 0xA
+#define AMT_STATUS_APPLICATION_DOES_NOT_EXIST 0xA
+
+//The requested number of bytes cannot be allocated in ISV storage.
+#define PT_STATUS_NOT_ENOUGH_STORAGE 0xB
+#define AMT_STATUS_NOT_ENOUGH_STORAGE 0xB
+
+//The specified name is invalid.
+#define PT_STATUS_INVALID_NAME 0xC
+#define AMT_STATUS_INVALID_NAME 0xC
+
+//The specified block does not exist.
+#define PT_STATUS_BLOCK_DOES_NOT_EXIST 0xD
+#define AMT_STATUS_BLOCK_DOES_NOT_EXIST 0xD
+
+//The specified byte offset is invalid.
+#define PT_STATUS_INVALID_BYTE_OFFSET 0xE
+#define AMT_STATUS_INVALID_BYTE_OFFSET 0xE
+
+//The specified byte count is invalid.
+#define PT_STATUS_INVALID_BYTE_COUNT 0xF
+#define AMT_STATUS_INVALID_BYTE_COUNT 0xF
+
+//The requesting application is not
+//permitted to request execution of the specified operation.
+#define PT_STATUS_NOT_PERMITTED 0x10
+#define AMT_STATUS_NOT_PERMITTED 0x10
+
+//The requesting application is not the owner of the block
+//as required for the requested operation.
+#define PT_STATUS_NOT_OWNER 0x11
+#define AMT_STATUS_NOT_OWNER 0x11
+
+//The specified block is locked by another application.
+#define PT_STATUS_BLOCK_LOCKED_BY_OTHER 0x12
+#define AMT_STATUS_BLOCK_LOCKED_BY_OTHER 0x12
+
+//The specified block is not locked.
+#define PT_STATUS_BLOCK_NOT_LOCKED 0x13
+#define AMT_STATUS_BLOCK_NOT_LOCKED 0x13
+
+//The specified group permission bits are invalid.
+#define PT_STATUS_INVALID_GROUP_PERMISSIONS 0x14
+#define AMT_STATUS_INVALID_GROUP_PERMISSIONS 0x14
+
+//The specified group does not exist.
+#define PT_STATUS_GROUP_DOES_NOT_EXIST 0x15
+#define AMT_STATUS_GROUP_DOES_NOT_EXIST 0x15
+
+//The specified member count is invalid.
+#define PT_STATUS_INVALID_MEMBER_COUNT 0x16
+#define AMT_STATUS_INVALID_MEMBER_COUNT 0x16
+
+//The request cannot be satisfied because a maximum
+//limit associated with the request has been reached.
+#define PT_STATUS_MAX_LIMIT_REACHED 0x17
+#define AMT_STATUS_MAX_LIMIT_REACHED 0x17
+
+//specified key algorithm is invalid.
+#define PT_STATUS_INVALID_AUTH_TYPE 0x18
+#define AMT_STATUS_INVALID_AUTH_TYPE 0x18
+
+//Not Used
+#define PT_STATUS_AUTHENTICATION_FAILED 0x19
+#define AMT_STATUS_AUTHENTICATION_FAILED 0x19
+
+//The specified DHCP mode is invalid.
+#define PT_STATUS_INVALID_DHCP_MODE 0x1A
+#define AMT_STATUS_INVALID_DHCP_MODE 0x1A
+
+//The specified IP address is not a valid IP unicast address.
+#define PT_STATUS_INVALID_IP_ADDRESS 0x1B
+#define AMT_STATUS_INVALID_IP_ADDRESS 0x1B
+
+//The specified domain name is not a valid domain name.
+#define PT_STATUS_INVALID_DOMAIN_NAME 0x1C
+#define AMT_STATUS_INVALID_DOMAIN_NAME 0x1C
+
+//Not Used
+#define PT_STATUS_UNSUPPORTED_VERSION 0x1D
+#define AMT_STATUS_UNSUPPORTED_VERSION 0x1D
+
+//The requested operation cannot be performed because a
+//prerequisite request message has not been received.
+#define PT_STATUS_REQUEST_UNEXPECTED 0x1E
+#define AMT_STATUS_REQUEST_UNEXPECTED 0x1E
+
+//Not Used
+#define PT_STATUS_INVALID_TABLE_TYPE 0x1F
+#define AMT_STATUS_INVALID_TABLE_TYPE 0x1F
+
+//The specified provisioning mode code is undefined.
+#define PT_STATUS_INVALID_PROVISIONING_STATE 0x20
+#define AMT_STATUS_INVALID_PROVISIONING_STATE 0x20
+
+//Not Used
+#define PT_STATUS_UNSUPPORTED_OBJECT 0x21
+#define AMT_STATUS_UNSUPPORTED_OBJECT 0x21
+
+//The specified time was not accepted by the Intel® AMT device
+//since it is earlier than the baseline time set for the device.
+#define PT_STATUS_INVALID_TIME 0x22
+#define AMT_STATUS_INVALID_TIME 0x22
+
+//StartingIndex is invalid.
+#define PT_STATUS_INVALID_INDEX 0x23
+#define AMT_STATUS_INVALID_INDEX 0x23
+
+//A parameter is invalid.
+#define PT_STATUS_INVALID_PARAMETER 0x24
+#define AMT_STATUS_INVALID_PARAMETER 0x24
+
+//An invalid netmask was supplied
+//(a valid netmask is an IP address in which all \911\92s are before
+//the \910\92 \96 e.g. FFFC0000h is valid, FF0C0000h is invalid).
+#define PT_STATUS_INVALID_NETMASK 0x25
+#define AMT_STATUS_INVALID_NETMASK 0x25
+
+//The operation failed because the Flash wear-out
+//protection mechanism prevented a write to an NVRAM sector.
+#define PT_STATUS_FLASH_WRITE_LIMIT_EXCEEDED 0x26
+#define AMT_STATUS_FLASH_WRITE_LIMIT_EXCEEDED 0x26
+
+//ME FW did not receive the entire image file.
+#define PT_STATUS_INVALID_IMAGE_LENGTH 0x27
+#define AMT_STATUS_INVALID_IMAGE_LENGTH 0x27
+
+//ME FW received an image file with an invalid signature.
+#define PT_STATUS_INVALID_IMAGE_SIGNATURE 0x28
+#define AMT_STATUS_INVALID_IMAGE_SIGNATURE 0x28
+
+//LME can not support the requested version.
+#define PT_STATUS_PROPOSE_ANOTHER_VERSION 0x29
+#define AMT_STATUS_PROPOSE_ANOTHER_VERSION 0x29
+
+//The PID must be a 64 bit quantity made up of ASCII codes
+//of some combination of 8 characters \96
+//capital alphabets (A\96Z), and numbers (0\969).
+#define PT_STATUS_INVALID_PID_FORMAT 0x2A
+#define AMT_STATUS_INVALID_PID_FORMAT 0x2A
+
+//The PPS must be a 256 bit quantity made up of ASCII codes
+//of some combination of 32 characters \96
+//capital alphabets (A\96Z), and numbers (0\969).
+#define PT_STATUS_INVALID_PPS_FORMAT 0x2B
+#define AMT_STATUS_INVALID_PPS_FORMAT 0x2B
+
+//Full BIST test has been blocked
+#define PT_STATUS_BIST_COMMAND_BLOCKED 0x2C
+#define AMT_STATUS_BIST_COMMAND_BLOCKED 0x2C
+
+//A TCP/IP connection could not be opened on with the selected port.
+#define PT_STATUS_CONNECTION_FAILED 0x2D
+#define AMT_STATUS_CONNECTION_FAILED 0x2D
+
+//Max number of connection reached.
+//LME can not open the requested connection.
+#define PT_STATUS_CONNECTION_TOO_MANY 0x2E
+#define AMT_STATUS_CONNECTION_TOO_MANY 0x2E
+
+//Random key generation is in progress.
+#define PT_STATUS_RNG_GENERATION_IN_PROGRESS 0x2F
+#define AMT_STATUS_RNG_GENERATION_IN_PROGRESS 0x2F
+
+//A randomly generated key does not exist.
+#define PT_STATUS_RNG_NOT_READY 0x30
+#define AMT_STATUS_RNG_NOT_READY 0x30
+
+//Self-generated AMT certificate does not exist.
+#define PT_STATUS_CERTIFICATE_NOT_READY 0x31
+#define AMT_STATUS_CERTIFICATE_NOT_READY 0x31
+
+//This code establishes a dividing line between
+//status codes which are common to host interface and
+//network interface and status codes which are used by
+//network interface only.
+#define PT_STATUS_NETWORK_IF_ERROR_BASE 0x800
+#define AMT_STATUS_NETWORK_IF_ERROR_BASE 0x800
+
+//The OEM number specified in the remote control
+//command is not supported by the Intel® AMT device
+#define PT_STATUS_UNSUPPORTED_OEM_NUMBER 0x801
+#define AMT_STATUS_UNSUPPORTED_OEM_NUMBER 0x801
+
+//The boot option specified in the remote control command
+//is not supported by the Intel® AMT device
+#define PT_STATUS_UNSUPPORTED_BOOT_OPTION 0x802
+#define AMT_STATUS_UNSUPPORTED_BOOT_OPTION 0x802
+
+//The command specified in the remote control command
+//is not supported by the Intel® AMT device
+#define PT_STATUS_INVALID_COMMAND 0x803
+#define AMT_STATUS_INVALID_COMMAND 0x803
+
+//The special command specified in the remote control command
+//is not supported by the Intel® AMT device
+#define PT_STATUS_INVALID_SPECIAL_COMMAND 0x804
+#define AMT_STATUS_INVALID_SPECIAL_COMMAND 0x804
+
+//The handle specified in the command is invalid
+#define PT_STATUS_INVALID_HANDLE 0x805
+#define AMT_STATUS_INVALID_HANDLE 0x805
+
+//The password specified in the User ACL is invalid
+#define PT_STATUS_INVALID_PASSWORD 0x806
+#define AMT_STATUS_INVALID_PASSWORD 0x806
+
+//The realm specified in the User ACL is invalid
+#define PT_STATUS_INVALID_REALM 0x807
+#define AMT_STATUS_INVALID_REALM 0x807
+
+//The FPACL or EACL entry is used by an active
+//registration and cannot be removed or modified.
+#define PT_STATUS_STORAGE_ACL_ENTRY_IN_USE 0x808
+#define AMT_STATUS_STORAGE_ACL_ENTRY_IN_USE 0x808
+
+//Essential data is missing on CommitChanges command.
+#define PT_STATUS_DATA_MISSING 0x809
+#define AMT_STATUS_DATA_MISSING 0x809
+
+//The parameter specified is a duplicate of an existing value.
+//Returned for a case where duplicate entries are added to FPACL
+//(Factory Partner Allocation Control List) or EACL
+//(Enterprise Access Control List) lists.
+#define PT_STATUS_DUPLICATE 0x80A
+#define AMT_STATUS_DUPLICATE 0x80A
+
+//Event Log operation failed due to the current freeze status of the log.
+#define PT_STATUS_EVENTLOG_FROZEN 0x80B
+#define AMT_STATUS_EVENTLOG_FROZEN 0x80B
+
+//The device is missing private key material.
+#define PT_STATUS_PKI_MISSING_KEYS 0x80C
+#define AMT_STATUS_PKI_MISSING_KEYS 0x80C
+
+//The device is currently generating a keypair.
+//Caller may try repeating this operation at a later time.
+#define PT_STATUS_PKI_GENERATING_KEYS 0x80D
+#define AMT_STATUS_PKI_GENERATING_KEYS 0x80D
+
+//An invalid Key was entered.
+#define PT_STATUS_INVALID_KEY 0x80E
+#define AMT_STATUS_INVALID_KEY 0x80E
+
+//An invalid X.509 certificate was entered.
+#define PT_STATUS_INVALID_CERT 0x80F
+#define AMT_STATUS_INVALID_CERT 0x80F
+
+//Certificate Chain and Private Key do not match.
+#define PT_STATUS_CERT_KEY_NOT_MATCH 0x810
+#define AMT_STATUS_CERT_KEY_NOT_MATCH 0x810
+
+//The request cannot be satisfied because the maximum
+//number of allowed Kerberos domains has been reached.
+//(The domain is determined by the first 24 Bytes of the SID.)
+#define PT_STATUS_MAX_KERB_DOMAIN_REACHED 0x811
+#define AMT_STATUS_MAX_KERB_DOMAIN_REACHED 0x811
+
+// The requested configuration is unsupported
+#define PT_STATUS_UNSUPPORTED 0x812
+#define AMT_STATUS_UNSUPPORTED 0x812
+
+// A profile with the requested priority already exists
+#define PT_STATUS_INVALID_PRIORITY 0x813
+#define AMT_STATUS_INVALID_PRIORITY 0x813
+
+// Unable to find specified element
+#define PT_STATUS_NOT_FOUND 0x814
+#define AMT_STATUS_NOT_FOUND 0x814
+
+// Invalid User credentials
+#define PT_STATUS_INVALID_CREDENTIALS 0x815
+#define AMT_STATUS_INVALID_CREDENTIALS 0x815
+
+// Passphrase is invalid
+#define PT_STATUS_INVALID_PASSPHRASE 0x816
+#define AMT_STATUS_INVALID_PASSPHRASE 0x816
+
+// A certificate handle must be chosen before the
+// operation can be completed.
+#define PT_STATUS_NO_ASSOCIATION 0x818
+#define AMT_STATUS_NO_ASSOCIATION 0x818
+
+//The application has identified an internal error
+#define PTSDK_STATUS_INTERNAL_ERROR 0x1000
+
+//An ISV operation was called while the library is not
+//initialized
+#define PTSDK_STATUS_NOT_INITIALIZED 0x1001
+
+//The requested library I/F is not supported by the current library
+//implementation.
+#define PTSDK_STATUS_LIB_VERSION_UNSUPPORTED 0x1002
+
+//One of the parameters is invalid (usually indicates a
+//NULL pointer or an invalid session handle is specified)
+#define PTSDK_STATUS_INVALID_PARAM 0x1003
+
+//The SDK could not allocate sufficient resources to complete the operation.
+#define PTSDK_STATUS_RESOURCES 0x1004
+
+//The Library has identified a HW Internal error.
+#define PTSDK_STATUS_HARDWARE_ACCESS_ERROR 0x1005
+
+//The application that sent the request message is not registered.
+//Usually indicates the registration timeout has elapsed.
+//The caller should reregister with the Intel AMT enabled device.
+#define PTSDK_STATUS_REQUESTOR_NOT_REGISTERED 0x1006
+
+//A network error has occurred while processing the call.
+#define PTSDK_STATUS_NETWORK_ERROR 0x1007
+
+//Specified container can not hold the requested string
+#define PTSDK_STATUS_PARAM_BUFFER_TOO_SHORT 0x1008
+
+//For Windows only.
+//ISVS_InitializeCOMinThread was not called by the current thread.
+#define PTSDK_STATUS_COM_NOT_INITIALIZED_IN_THREAD 0x1009
+
+//The URL parameter was not optional in current configuration.
+#define PTSDK_STATUS_URL_REQUIRED 0x100A
+
+#endif
git://git.onelab.eu / monitor.git / blobdiff