# the name of the floppy based network configuration
# files (checked first). the name planet.cnf is kept
-# for backward compatibility with old nodes
-FLOPPY_NET_CONF=planet.cnf
+# for backward compatibility with old nodes, and only
+# the floppy disk is searched for files with this name.
+# new files are named plnode.txt and can be located on
+# a floppy or usb device or on the cdrom
+OLD_NODE_CONF_NAME=planet.cnf
+NEW_NODE_CONF_NAME=plnode.txt
-# location of cd-based network configuration file
-# (checked if floppy conf file missing)
-USER_NET_CONF=/usr/boot/user-net.cnf
+# one location of cd-based network configuration file
+# (checked if floppy conf file missing and usb
+# configuration file is missing)
+CD_NET_CONF_BOOT=/usr/boot/$NEW_NODE_CONF_NAME
+
+# the other location of cd-based network configuration file
+CD_NET_CONF_ROOT=/usr/$NEW_NODE_CONF_NAME
# if all other network configuration file sources
# don't exist, fall back to this one (always on the cd)
FALLBACK_NET_CONF=/usr/boot/default-net.cnf
+# a temporary place to hold the old configuration file
+# off of the floppy disk if we find it (so we don't have
+# to remount the floppy later)
+TMP_OLD_FLOPPY_CONF_FILE=/tmp/oldfloppy_planet.cnf
+
# once a configuration file is found, save it in /tmp
# (may be used later by boot scripts)
USED_NET_CONF=/tmp/planet.cnf
-# default device to use for contacting PLC
+# default device to use for contacting PLC if not specified
+# in the configuration file
DEFAULT_NET_DEV=eth0
# where to store the temporary dhclient conf file
DHCLIENT_CONF_FILE=/tmp/dhclient.conf
-# which fs types we support floppy disks in
-FLOPPY_FS_TYPES="msdos,ext2"
+# which fs types we support finding node configuration files on
+# (will be based as a -t parameter to mount)
+NODE_CONF_DEVICE_FS_TYPES="msdos,ext2"
+
+# a temporary place to mount devices that might contain configuration
+# files on
+CONF_DEVICE_MOUNT_POINT=/mnt/confdevice
+/bin/mkdir -p $CONF_DEVICE_MOUNT_POINT
-FLOPPY_MOUNT_POINT=/mnt/floppy
-/bin/mkdir -p $FLOPPY_MOUNT_POINT
+# for some backwards compatibility, save the ifconfig <device>
+# output to this file after everything is online
+IFCONFIG_OUTPUT=/tmp/ifconfig
+
+# set to 1 if the default network configuration was loaded off the cd
+# (no other configuration file found)
+DEFAULT_NET_CONF=0
net_init_failed()
echo
echo "pl_netinit: network initialization failed,"
echo "pl_netinit: shutting down machine in two hours"
- /bin/sleep 7200
+ /bin/sleep 2h
/sbin/shutdown -h now
exit 1
}
[ ${3:-666} -le 255 ] && [ ${4:-666} -le 255 ]
}
-echo "pl_netinit: bringing loopback network device up"
-/sbin/ifconfig lo 127.0.0.1 up
+# find and parse a node network configuration file. return 0 if not found,
+# return 1 if found and parsed. if this is the case, DEFAULT_NET_CONF will
+# be set to 1. For any found configuration file, $USED_NET_CONF will
+# contain the validated contents
+find_node_config()
+{
+ /bin/rm -f $TMP_OLD_FLOPPY_CONF_FILE 2>&1 > /dev/null
+
+ echo "pl_netinit: looking for node configuration file on floppy"
+
+ /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES /dev/fd0 \
+ $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
+ if [[ $? -eq 0 ]]; then
+
+ # 1. check for new named file first on the floppy disk
+ if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
+ echo "pl_netinit: found node configuration file plnode.txt, using"
+
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ return 1
+
+ # since we have the floppy mounted already, see if an old file
+ # exists there so we don't have to remount the floppy when we need
+ # to check for an old file on it (later in the order). if it does
+ # just copy it off to a special location
+ elif [ -r "$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME" ]; then
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME"
+ /bin/cp -f $conf_file $TMP_OLD_FLOPPY_CONF_FILE
+ echo "pl_netinit: found old named configuration file, checking later."
+ else
+ echo "pl_netinit: floppy mounted, but no configuration file."
+ fi
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ else
+ echo "pl_netinit: no floppy could be mounted, continuing search."
+ fi
-DEFAULT_NET_CONF=0
-FOUND_NET_CONF=0
+ # 2. check for a new named file on removable flash devices (those
+ # that start with sd*, because usb_storage emulates scsi devices).
+ # to prevent checking normal scsi disks, also make sure
+ # /sys/block/<dev>/removable is set to 1
-echo "pl_netinit: looking for network configuration on floppy"
-/bin/mount -o ro -t $FLOPPY_FS_TYPES /dev/fd0 $FLOPPY_MOUNT_POINT 2>&1 > /dev/null
-if [[ $? -eq 0 ]]; then
- floppy_conf_file="$FLOPPY_MOUNT_POINT/$FLOPPY_NET_CONF"
- if [ -r "$floppy_conf_file" ]; then
+ echo "pl_netinit: looking for node configuration file on flash based devices"
- echo "pl_netinit: found floppy configuration file, using"
- /etc/init.d/pl_validateconf < $floppy_conf_file > $USED_NET_CONF
- FOUND_NET_CONF=1
- else
- echo "pl_netinit: floppy mounted, but no configuration file."
+ # make the sd* expansion fail to an empty string if there are no sd
+ # devices
+ shopt -s nullglob
+
+ for device in /sys/block/sd*; do
+ removable=`cat $device/removable`
+ if [[ $removable -ne 1 ]]; then
+ continue
+ fi
+
+ partitions=$(/bin/awk "\$4 ~ /`basename $device`[0-9]*/ { print \$4 }" /proc/partitions)
+ for partition in $partitions ; do
+ check_dev=/dev/$partition
+
+ echo "pl_netinit: looking for node configuration file on device $check_dev"
+ /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES $check_dev \
+ $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
+ if [[ $? -eq 0 ]]; then
+ if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
+ echo "pl_netinit: found node configuration file plnode.txt, using"
+
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ echo "pl_netinit: found configuration"
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ return 1
+ fi
+
+ echo "pl_netinit: not found"
+
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ fi
+ done
+ done
+
+ # normal filename expansion setting
+ shopt -u nullglob
+
+ # 3. see if there is an old file on the floppy disk. if there was,
+ # the file $TMP_OLD_FLOPPY_CONF_FILE will be readable.
+ if [ -r "$TMP_OLD_FLOPPY_CONF_FILE" ]; then
+ echo "pl_netinit: found node configuration file planet.cnf, using"
+
+ conf_file=$TMP_OLD_FLOPPY_CONF_FILE
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ return 1
fi
- /bin/umount $FLOPPY_MOUNT_POINT
-else
- echo "pl_netinit: no floppy found"
-fi
-if [[ $FOUND_NET_CONF -eq 0 ]]; then
- echo "pl_netinit: looking for network configuration on cd"
- if [ -r "$USER_NET_CONF" ]; then
+ # 4. check for plnode.txt on the cd at /usr/boot
+ echo "pl_netinit: looking for network configuration on cd in /usr/boot"
+ if [ -r "$CD_NET_CONF_BOOT" ]; then
+
+ echo "pl_netinit: found cd configuration file, using"
+ /etc/init.d/pl_validateconf < $CD_NET_CONF_BOOT > $USED_NET_CONF
+ return 1
+ fi
+
+ # 5. check for plnode.txt on the cd at /usr
+ echo "pl_netinit: looking for network configuration on cd in /usr"
+ if [ -r "$CD_NET_CONF_ROOT" ]; then
+
echo "pl_netinit: found cd configuration file, using"
- /etc/init.d/pl_validateconf < $USER_NET_CONF > $USED_NET_CONF
- FOUND_NET_CONF=1
+ /etc/init.d/pl_validateconf < $CD_NET_CONF_ROOT > $USED_NET_CONF
+ return 1
fi
-fi
-if [[ $FOUND_NET_CONF -eq 0 ]]; then
+
+ # 6. no node configuration file could be found, fall back to
+ # builtin default. this can't be used to install a machine, but
+ # will at least let it download and run the boot manager, which
+ # can inform the users appropriately.
echo "pl_netinit: using default network configuration"
if [ -r "$FALLBACK_NET_CONF" ]; then
-
echo "pl_netinit: found cd default configuration file, using"
/etc/init.d/pl_validateconf < $FALLBACK_NET_CONF > $USED_NET_CONF
- FOUND_NET_CONF=1
DEFAULT_NET_CONF=1
+ return 1
fi
-fi
+
+ return 0
+}
-if [[ $FOUND_NET_CONF -eq 0 ]]; then
+echo "pl_netinit: bringing loopback network device up"
+/sbin/ifconfig lo 127.0.0.1 up
+
+find_node_config
+if [ $? -eq 0 ]; then
# no network configuration file found. this should not happen as the
# default cd image has a backup one. halt.
echo "pl_netinit: unable to find even a default network configuration"
# either a mac address (in which case we will need to find the device), or
# the device itself
-if [[ -n "$PRIMARY_MAC" ]]; then
+if [[ -n "$NET_DEVICE" ]]; then
# the user specified a mac address we should use. find the network
# device for it.
- echo "pl_netinit: looking for a device with mac address $PRIMARY_MAC"
+ echo "pl_netinit: looking for a device with mac address $NET_DEVICE"
- pushd .
- cd /sys/class/net
+ pushd /sys/class/net
for device in *; do
dev_address=`cat $device/address`
- if [[ "$dev_address" == "$PRIMARY_MAC" ]]; then
+ if [[ "$dev_address" == "$NET_DEVICE" ]]; then
ETH_DEVICE=$device
echo "pl_netinit: found device $ETH_DEVICE"
break
fi
done
popd
-
-elif [[ -n "$PRIMARY_DEV" ]]; then
- # the user specified a virtual ethernet device to use.
- ETH_DEVICE=$PRIMARY_DEV
- echo "pl_netinit: using user specified device $ETH_DEVICE"
-
else
ETH_DEVICE=$DEFAULT_NET_DEV
echo "pl_netinit: using default device $ETH_DEVICE"
fi
-# if we couldn't find a device (would happen if PRIMARY_MAC was specified
+# if we couldn't find a device (would happen if NET_DEVICE was specified
# but we couldn't find a device for that addresS), then abort the rest
# of the startup
if [[ -z "$ETH_DEVICE" ]]; then
echo "pl_netinit: unable to find a usable device, check to make sure"
- echo "pl_netinit: the PRIMARY_MAC field in the configuration file"
+ echo "pl_netinit: the NET_DEVICE field in the configuration file"
echo "pl_netinit: cooresponds with a network adapter on this system"
net_init_failed
fi
# actually check to make sure ifconfig <device> succeeds
/sbin/ifconfig $ETH_DEVICE up 2>&1 > /dev/null
if [[ $? -ne 0 ]]; then
- echo "pl_netinit: device $ETH_DEVICE does not exist,"
- echo "pl_netinit: this is due to either the device not existing,"
- echo "pl_netinit: or its device drivers not being loaded"
+ echo "pl_netinit: device $ETH_DEVICE does not exist, most likely"
+ echo "pl_netinit: this cd does not have hardware support for your"
+ echo "pl_netinit: network adapter. please send the following lines"
+ echo "pl_netinit: to PlanetLab Support: support@planet-lab.org"
+ echo "pl_netinit: for further assistance"
+ echo
+ /sbin/lspci -n | /bin/grep "Class 0200"
+ echo
+
net_init_failed
fi
/sbin/dhclient -1 -cf $DHCLIENT_CONF_FILE $ETH_DEVICE
if [[ $? -ne 0 ]]; then
echo "pl_netinit: dhcp failed, retrying in 2 minutes"
- /sbin/sleep 120
+ /bin/sleep 120
else
echo "pl_netinit: dhcp succeeded"
configured=1
fi
fi
+# for backwards compatibility
+/sbin/ifconfig $ETH_DEVICE > $IFCONFIG_OUTPUT
+
echo "pl_netinit: network online"
git://git.onelab.eu / bootcd.git / blobdiff