# (no other configuration file found)
DEFAULT_NET_CONF=0
+
net_init_failed()
{
echo
echo "pl_netinit: network initialization failed,"
echo "pl_netinit: shutting down machine in two hours"
- /bin/sleep 7200
+ /bin/sleep 2h
/sbin/shutdown -h now
exit 1
}
# 1. check for new named file first on the floppy disk
if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
- echo "pl_netinit: found node configuration file plnode.txt, using"
-
conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ echo "pl_netinit: found node configuration file $conf_file"
/etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
/bin/umount $CONF_DEVICE_MOUNT_POINT
return 1
echo "pl_netinit: looking for node configuration file on flash based devices"
- echo "pl_netinit: waiting for flash devices if any to come online"
- # some usb flash based devices take a couple of seconds to initialize
- # also, try to read the partition table off the device to make sure
- # it shows up in /sys/block
- /bin/sleep 10s
-
- # make the sd* expansion fail to an empty string if there are no sd
+ # make the sd* hd* expansion fail to an empty string if there are no sd
# devices
shopt -s nullglob
- for device in /sys/block/sd*; do
+ for device in /sys/block/[hs]d*; do
removable=`cat $device/removable`
if [[ $removable -ne 1 ]]; then
continue
fi
- check_dev=/dev/`basename $device`1
-
- echo "pl_netinit: looking for node configuration file on device $check_dev"
- /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES $check_dev \
- $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
- if [[ $? -eq 0 ]]; then
- if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
- echo "pl_netinit: found node configuration file plnode.txt, using"
+ partitions=$(/bin/awk "\$4 ~ /`basename $device`[0-9]*/ { print \$4 }" /proc/partitions)
+ for partition in $partitions ; do
+ check_dev=/dev/$partition
+
+ echo "pl_netinit: looking for node configuration file on device $check_dev"
+ /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES $check_dev \
+ $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
+ if [[ $? -eq 0 ]]; then
+ if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ echo "pl_netinit: found node configuration file $conf_file"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ echo "pl_netinit: found configuration"
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ return 1
+ fi
+
+ echo "pl_netinit: not found"
- conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
- /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
- echo "pl_netinit: found configuration"
/bin/umount $CONF_DEVICE_MOUNT_POINT
- return 1
fi
-
- echo "pl_netinit: not found"
-
- /bin/umount $CONF_DEVICE_MOUNT_POINT
- fi
+ done
done
# normal filename expansion setting
# 3. see if there is an old file on the floppy disk. if there was,
# the file $TMP_OLD_FLOPPY_CONF_FILE will be readable.
if [ -r "$TMP_OLD_FLOPPY_CONF_FILE" ]; then
- echo "pl_netinit: found node configuration file planet.cnf, using"
-
conf_file=$TMP_OLD_FLOPPY_CONF_FILE
+ echo "pl_netinit: found node configuration file $conf_file"
/etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
return 1
fi
echo "pl_netinit: looking for network configuration on cd in /usr/boot"
if [ -r "$CD_NET_CONF_BOOT" ]; then
- echo "pl_netinit: found cd configuration file, using"
+ echo "pl_netinit: found cd configuration file $CD_NET_BOOT_CONF"
/etc/init.d/pl_validateconf < $CD_NET_CONF_BOOT > $USED_NET_CONF
return 1
fi
echo "pl_netinit: looking for network configuration on cd in /usr"
if [ -r "$CD_NET_CONF_ROOT" ]; then
- echo "pl_netinit: found cd configuration file, using"
+ echo "pl_netinit: found cd configuration file $CD_NET_CONF_ROOT"
/etc/init.d/pl_validateconf < $CD_NET_CONF_ROOT > $USED_NET_CONF
return 1
fi
# can inform the users appropriately.
echo "pl_netinit: using default network configuration"
if [ -r "$FALLBACK_NET_CONF" ]; then
- echo "pl_netinit: found cd default configuration file, using"
+ echo "pl_netinit: found cd default configuration file $FALLBACK_NET_CONF"
/etc/init.d/pl_validateconf < $FALLBACK_NET_CONF > $USED_NET_CONF
DEFAULT_NET_CONF=1
return 1
/bin/rm -f $USED_NET_CONF
fi
+# initialize IPMI device
+if [[ -n "$IPMI_ADDRESS" ]] ; then
+ echo -n "pl_netinit: initializing IPMI: "
+ cmd="ipnmac -i $IPMI_ADDRESS"
+ if [[ -n "$IPMI_MAC" ]] ; then
+ cmd="$cmd -m $IPMI_MAC"
+ fi
+ echo $cmd
+ $cmd
+fi
+
# now, we need to find which device to use (ie, eth0 or eth1). start out
# by defaulting to eth0, then see if the network configuration file specified
# either a mac address (in which case we will need to find the device), or
if [[ -n "$NET_DEVICE" ]]; then
# the user specified a mac address we should use. find the network
# device for it.
- echo "pl_netinit: looking for a device with mac address $NET_DEVICE"
+ NET_DEVICE=$(tr A-Z a-z <<<$NET_DEVICE)
- pushd .
- cd /sys/class/net
+ pushd /sys/class/net
for device in *; do
- dev_address=`cat $device/address`
- if [[ "$dev_address" == "$NET_DEVICE" ]]; then
+ dev_address=`cat $device/address | tr A-Z a-z`
+ if [ "$device" == "$NET_DEVICE" -o "$dev_address" == "$NET_DEVICE" ]; then
ETH_DEVICE=$device
- echo "pl_netinit: found device $ETH_DEVICE"
+ echo "pl_netinit: found device $ETH_DEVICE with mac address $dev_address"
break
fi
done
popd
-
-elif [[ -n "$PRIMARY_DEV" ]]; then
- # the user specified a virtual ethernet device to use.
- ETH_DEVICE=$PRIMARY_DEV
- echo "pl_netinit: using user specified device $ETH_DEVICE"
-
else
ETH_DEVICE=$DEFAULT_NET_DEV
echo "pl_netinit: using default device $ETH_DEVICE"
# actually check to make sure ifconfig <device> succeeds
/sbin/ifconfig $ETH_DEVICE up 2>&1 > /dev/null
if [[ $? -ne 0 ]]; then
- echo "pl_netinit: device $ETH_DEVICE does not exist,"
- echo "pl_netinit: this is due to either the device not existing,"
- echo "pl_netinit: or its device drivers not being loaded"
+ echo "pl_netinit: device $ETH_DEVICE does not exist, most likely"
+ echo "pl_netinit: this cd does not have hardware support for your"
+ echo "pl_netinit: network adapter. please send the following lines"
+ echo "pl_netinit: to PlanetLab Support: support@planet-lab.org"
+ echo "pl_netinit: for further assistance"
+ echo
+ /sbin/lspci -n | /bin/grep "Class 0200"
+ echo
+
net_init_failed
fi
-if [[ "$IP_METHOD" == "dhcp" ]]; then
- echo "pl_netinit: attempting to bring up device with dhcp"
-
- # setup a dhclient conf file for this device (used to send
- # our hostname to the dhcp server)
- echo "interface \"$ETH_DEVICE\" {" > $DHCLIENT_CONF_FILE
- echo "send host-name \"$HOST_NAME.$DOMAIN_NAME\";" >> $DHCLIENT_CONF_FILE
- echo "}" >> $DHCLIENT_CONF_FILE
-
- # touch the redhat net device configuration file so
- # dhclient doesn't complain
- /bin/touch /etc/sysconfig/network-scripts/ifcfg-$ETH_DEVICE
-
- configured=0
- while [[ $configured -eq 0 ]]; do
- /sbin/dhclient -1 -cf $DHCLIENT_CONF_FILE $ETH_DEVICE
- if [[ $? -ne 0 ]]; then
- echo "pl_netinit: dhcp failed, retrying in 2 minutes"
- /bin/sleep 120
- else
- echo "pl_netinit: dhcp succeeded"
- configured=1
- break
- fi
- done
-else
- echo "pl_netinit: configuring device statically"
+ifcfg=/etc/sysconfig/network-scripts/ifcfg-$ETH_DEVICE
+echo "DEVICE=$ETH_DEVICE" > $ifcfg
+[ -n "$NET_DEVICE" ] && \
+ echo "HWADDR=$NET_DEVICE" >> $ifcfg
+echo "BOOTPROTO=$IP_METHOD" >> $ifcfg
+echo "DHCP_HOSTNAME=$HOST_NAME.$DOMAIN_NAME" >> $ifcfg
+
+if [ -n "$WLAN_SSID$WLAN_IWCONFIG$WLAN_MODE" ]; then
+ [ -n "$WLAN_SSID" ] && \
+ echo "ESSID=$WLAN_SSID" >> $ifcfg
+ [ -n "$WLAN_IWCONFIG" ] && \
+ echo "IWCONFIG=$WLAN_IWCONFIG" >> $ifcfg
+ [ -n "$WLAN_MODE" ] && \
+ echo "MODE=$WLAN_MODE" >> $ifcfg
+fi
- /sbin/ifconfig $ETH_DEVICE $IP_ADDRESS broadcast $IP_BROADCASTADDR \
- netmask $IP_NETMASK
- /sbin/route add default gw $IP_GATEWAY dev $ETH_DEVICE
+if [ "$IP_METHOD" = "static" ]; then
+ echo "IPADDR=$IP_ADDRESS" >> $ifcfg
+ echo "NETMASK=$IP_NETMASK" >> $ifcfg
+ echo "GATEWAY=$IP_GATEWAY" >> $ifcfg
+
+ /bin/hostname "$HOST_NAME.$DOMAIN_NAME"
if [[ -z "$IP_DNS1" ]]; then
echo "pl_netinit: no dns server specified, cannot continue."
fi
fi
+
+echo "pl_netinit: attempting to bring up device $ETH_DEVICE"
+/sbin/ifup $ETH_DEVICE
+
# for backwards compatibility
/sbin/ifconfig $ETH_DEVICE > $IFCONFIG_OUTPUT
git://git.onelab.eu / bootcd.git / blobdiff