*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
+#include <asm/fs_pd.h>
#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
- pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
/*
* Transmit characters, refill buffer descriptor, if possible
*/
-static void cpm_uart_int_tx(struct uart_port *port, struct pt_regs *regs)
+static void cpm_uart_int_tx(struct uart_port *port)
{
pr_debug("CPM uart[%d]:TX INT\n", port->line);
/*
* Receive characters
*/
-static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
+static void cpm_uart_int_rx(struct uart_port *port)
{
int i;
unsigned char ch, *cp;
if (status &
(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
goto handle_error;
- if (uart_handle_sysrq_char(port, ch, regs))
+ if (uart_handle_sysrq_char(port, ch))
continue;
error_return:
/*
* Asynchron mode interrupt handler
*/
-static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
+static irqreturn_t cpm_uart_int(int irq, void *data)
{
u8 events;
struct uart_port *port = (struct uart_port *)data;
if (events & SMCM_BRKE)
uart_handle_break(port);
if (events & SMCM_RX)
- cpm_uart_int_rx(port, regs);
+ cpm_uart_int_rx(port);
if (events & SMCM_TX)
- cpm_uart_int_tx(port, regs);
+ cpm_uart_int_tx(port);
} else {
events = sccp->scc_scce;
sccp->scc_scce = events;
if (events & UART_SCCM_BRKE)
uart_handle_break(port);
if (events & UART_SCCM_RX)
- cpm_uart_int_rx(port, regs);
+ cpm_uart_int_rx(port);
if (events & UART_SCCM_TX)
- cpm_uart_int_tx(port, regs);
+ cpm_uart_int_tx(port);
}
return (events) ? IRQ_HANDLED : IRQ_NONE;
}
/* Startup rx-int */
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
} else {
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
if (!(pinfo->flags & FLAG_CONSOLE))
{
struct resource *r;
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
- int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */
+ int idx; /* It is UART_SMCx or UART_SCCx index */
struct uart_cpm_port *pinfo;
int line;
u32 mem, pram;
+ idx = pdata->fs_no = fs_uart_get_id(pdata);
+
line = cpm_uart_id2nr(idx);
if(line < 0) {
printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
- return -1;
+ return -EINVAL;
}
pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
return -EINVAL;
- mem = r->start;
+ mem = (u32)ioremap(r->start, r->end - r->start + 1);
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
return -EINVAL;
- pram = r->start;
+ pram = (u32)ioremap(r->start, r->end - r->start + 1);
if(idx > fsid_smc2_uart) {
pinfo->sccp = (scc_t *)mem;
pdata = pdev->dev.platform_data;
if (pdata)
if (pdata->init_ioports)
- pdata->init_ioports();
+ pdata->init_ioports(pdata);
cpm_uart_drv_get_platform_data(pdev, 1);
}
if (options) {
uart_parse_options(options, &baud, &parity, &bits, &flow);
} else {
- bd_t *bd = (bd_t *) __res;
-
- if (bd->bi_baudrate)
- baud = bd->bi_baudrate;
- else
+ if ((baud = uart_baudrate()) == -1)
baud = 9600;
}
}
pdata = pdev->dev.platform_data;
- pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
return ret;
+ pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
+
if (pdata->init_ioports)
- pdata->init_ioports();
+ pdata->init_ioports(pdata);
ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
pr_info(
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
- ret = cpm_uart_init_portdesc();
- if (ret)
- return ret;
-#endif
+
+ /* Don't run this again, if the console driver did it already */
+ if (cpm_uart_nr == 0)
+ cpm_uart_init_portdesc();
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ if (cpm_uart_ports[con].set_lineif)
+ cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}