menu "Graphics support"
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
-
config FB
tristate "Support for frame buffer devices"
---help---
depends on FB
default n
-config FB_BACKLIGHT
- bool
- depends on FB
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
- default n
-
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
here and read <file:Documentation/modules.txt>. The module
will be called amba-clcd.
-choice
-
- depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
- prompt "LCD Panel"
- default FB_ARMCLCD_SHARP_LQ035Q7DB02
-
-config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
- bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
- help
- This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
- color QVGA, HRTFT panel. The LogicPD device includes an
- an integrated HRTFT controller IC.
- The native resolution is 240x320.
-
-config FB_ARMCLCD_SHARP_LQ057Q3DC02
- bool "LogicPD LCD 5.7\" QVGA"
- help
- This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
- color QVGA, TFT panel. The LogicPD device includes an
- The native resolution is 320x240.
-
-config FB_ARMCLCD_SHARP_LQ64D343
- bool "LogicPD LCD 6.4\" VGA"
- help
- This is an implementation of the Sharp LQ64D343, a 6.4"
- color VGA, TFT panel. The LogicPD device includes an
- The native resolution is 640x480.
-
-config FB_ARMCLCD_SHARP_LQ10D368
- bool "LogicPD LCD 10.4\" VGA"
- help
- This is an implementation of the Sharp LQ10D368, a 10.4"
- color VGA, TFT panel. The LogicPD device includes an
- The native resolution is 640x480.
-
-
-config FB_ARMCLCD_SHARP_LQ121S1DG41
- bool "LogicPD LCD 12.1\" SVGA"
- help
- This is an implementation of the Sharp LQ121S1DG41, a 12.1"
- color SVGA, TFT panel. The LogicPD device includes an
- The native resolution is 800x600.
-
- This panel requires a clock rate may be an integer fraction
- of the base LCDCLK frequency. The driver will select the
- highest frequency available that is lower than the maximum
- allowed. The panel may flicker if the clock rate is
- slower than the recommended minimum.
-
-config FB_ARMCLCD_AUO_A070VW01_WIDE
- bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
- help
- This is an implementation of the AU Optronics, a 7.0"
- WIDE Color. The native resolution is 234x480.
-
-config FB_ARMCLCD_HITACHI
- bool "Hitachi Wide Screen 800x480"
- help
- This is an implementation of the Hitachi 800x480.
-
-endchoice
-
-
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
config FB_CONTROL
bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC && PPC32
+ depends on (FB = y) && PPC_PMAC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_PLATINUM
bool "Apple \"platinum\" display support"
- depends on (FB = y) && PPC_PMAC && PPC32
+ depends on (FB = y) && PPC_PMAC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
- depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+ depends on (FB = y) && (MAC || PPC_PMAC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC32
+ depends on (FB = y) && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Asiliant 69030 chipset
config FB_IMSTT
bool "IMS Twin Turbo display support"
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-config FB_IMAC
- bool "Intel-based Macintosh Framebuffer Support"
- depends on (FB = y) && X86 && EFI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Intel-based Macintosh
+config VIDEO_SELECT
+ bool
+ depends on FB_VESA
+ default y
config FB_HGA
tristate "Hercules mono graphics support"
This will compile the Hercules mono graphics with
acceleration functions.
+
+config VIDEO_SELECT
+ bool
+ depends on (FB = y) && X86
+ default y
+
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
independently validate video mode parameters, you should say Y
here.
-config FB_NVIDIA_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_NVIDIA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
of debugging informations to provide to the maintainer when
something goes wrong.
-config FB_RIVA_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_RIVA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86_32
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
There is no need for enabling 'Matrox multihead support' if you have
only one Matrox card in the box.
+config FB_RADEON_OLD
+ tristate "ATI Radeon display support (Old driver)"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MACMODES if PPC
+ help
+ Choose this option if you want to use an ATI Radeon graphics card as
+ a framebuffer device. There are both PCI and AGP versions. You
+ don't need to choose this to run the Radeon in plain VGA mode.
+ There is a product page at
+ <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
There is a product page at
http://apps.ati.com/ATIcompare/
-
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
help
Say Y here if you want DDC/I2C support for your Radeon board.
-config FB_RADEON_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_RADEON && PMAC_BACKLIGHT
- select FB_BACKLIGHT
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
To compile this driver as a module, choose M here: the
module will be called aty128fb.
-config FB_ATY128_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_ATY128 && PMAC_BACKLIGHT
- select FB_BACKLIGHT
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
- depends on FB && !SPARC32
+ depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-config FB_ATY_BACKLIGHT
- bool "Support for backlight control"
- depends on FB_ATY && PMAC_BACKLIGHT
- select FB_BACKLIGHT
- default y
- help
- Say Y here if you want to control the backlight of your display.
-
config FB_S3TRIO
bool "S3 Trio display support"
depends on (FB = y) && PPC && BROKEN
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
-config FB_AU1200
- bool "Au1200 LCD Driver"
- depends on FB && MIPS && SOC_AU1200
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer driver for the AMD Au1200 SOC. It can drive
- various panels and CRTs by passing in kernel cmd line option
- au1200fb:panel=<name>.
-
source "drivers/video/geode/Kconfig"
config FB_FFB
<file:Documentation/fb/pxafb.txt> describes the available parameters.
-config FB_MBX
- tristate "2700G LCD framebuffer support"
- depends on FB && ARCH_PXA
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Framebuffer driver for the Intel 2700G (Marathon) Graphics
- Accelerator
-
-config FB_MBX_DEBUG
- bool "Enable debugging info via debugfs"
- depends on FB_MBX && DEBUG_FS
- default n
- ---help---
- Enable this if you want debugging information using the debug
- filesystem (debugfs)
-
- If unsure, say N.
-
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
-config FB_PNX4008_DUM
- tristate "Display Update Module support on Philips PNX4008 board"
- depends on FB && ARCH_PNX4008
- ---help---
- Say Y here to enable support for PNX4008 Display Update Module (DUM)
-
-config FB_PNX4008_DUM_RGB
- tristate "RGB Framebuffer support on Philips PNX4008 board"
- depends on FB_PNX4008_DUM
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Say Y here to enable support for PNX4008 RGB Framebuffer
-
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
source "drivers/video/logo/Kconfig"
endif
-if SYSFS
+if FB && SYSFS
source "drivers/video/backlight/Kconfig"
endif