#define ODP_PORT_QUERY _IOWR('O', 9, struct odp_port)
#define ODP_PORT_LIST _IOWR('O', 10, struct odp_portvec)
-#define ODP_PORT_GROUP_SET _IOR('O', 11, struct odp_port_group)
-#define ODP_PORT_GROUP_GET _IOWR('O', 12, struct odp_port_group)
-
#define ODP_FLOW_GET _IOWR('O', 13, struct odp_flow)
#define ODP_FLOW_PUT _IOWR('O', 14, struct odp_flow)
#define ODP_FLOW_LIST _IOWR('O', 15, struct odp_flowvec)
/* Ports. */
uint32_t n_ports; /* Current number of ports. */
uint32_t max_ports; /* Maximum supported number of ports. */
- uint16_t max_groups; /* Maximum number of port groups. */
- uint16_t reserved;
/* Lookups. */
uint64_t n_frags; /* Number of dropped IP fragments. */
uint32_t n_ports;
};
-struct odp_port_group {
- uint16_t *ports;
- uint16_t n_ports; /* Number of ports. */
- uint16_t group; /* Group number. */
-};
-
struct odp_flow_stats {
uint64_t n_packets; /* Number of matched packets. */
uint64_t n_bytes; /* Number of matched bytes. */
uint64_t used_sec; /* Time last used, in system monotonic time. */
uint32_t used_nsec;
uint8_t tcp_flags;
- uint8_t ip_tos;
+ uint8_t reserved;
uint16_t error; /* Used by ODP_FLOW_GET. */
};
+/*
+ * The datapath protocol adopts the Linux convention for TCI fields: if an
+ * 802.1Q header is present then its TCI value is used verbatim except that the
+ * CFI bit (0x1000) is always set to 1, and all-bits-zero indicates no 802.1Q
+ * header.
+ */
+#define ODP_TCI_PRESENT 0x1000 /* CFI bit */
+
struct odp_flow_key {
ovs_be32 tun_id; /* Encapsulating tunnel ID. */
ovs_be32 nw_src; /* IP source address. */
ovs_be32 nw_dst; /* IP destination address. */
uint16_t in_port; /* Input switch port. */
- ovs_be16 dl_vlan; /* Input VLAN. */
+ ovs_be16 dl_tci; /* All zeros if 802.1Q header absent,
+ * ODP_TCI_PRESENT set if present. */
ovs_be16 dl_type; /* Ethernet frame type. */
ovs_be16 tp_src; /* TCP/UDP source port. */
ovs_be16 tp_dst; /* TCP/UDP destination port. */
uint8_t dl_src[6]; /* Ethernet source address. */
uint8_t dl_dst[6]; /* Ethernet destination address. */
uint8_t nw_proto; /* IP protocol or lower 8 bits of
- ARP opcode. */
- uint8_t dl_vlan_pcp; /* Input VLAN priority. */
+ ARP opcode. */
uint8_t nw_tos; /* IP ToS (DSCP field, 6 bits). */
- uint8_t reserved[3]; /* Align to 32-bits...must be zeroed. */
};
/* Flags for ODP_FLOW. */
uint32_t n_flows;
};
-/* The VLAN id is 12 bits, so we can use the entire 16 bits to indicate
- * special conditions. All ones is used to match that no VLAN id was
- * set. */
-#define ODP_VLAN_NONE 0xffff
-
/* Action types. */
#define ODPAT_OUTPUT 0 /* Output to switch port. */
-#define ODPAT_OUTPUT_GROUP 1 /* Output to all ports in group. */
#define ODPAT_CONTROLLER 2 /* Send copy to controller. */
-#define ODPAT_SET_VLAN_VID 3 /* Set the 802.1q VLAN id. */
-#define ODPAT_SET_VLAN_PCP 4 /* Set the 802.1q priority. */
+#define ODPAT_SET_DL_TCI 3 /* Set the 802.1q TCI value. */
#define ODPAT_STRIP_VLAN 5 /* Strip the 802.1q header. */
#define ODPAT_SET_DL_SRC 6 /* Ethernet source address. */
#define ODPAT_SET_DL_DST 7 /* Ethernet destination address. */
#define ODPAT_SET_TUNNEL 13 /* Set the encapsulating tunnel ID. */
#define ODPAT_SET_PRIORITY 14 /* Set skb->priority. */
#define ODPAT_POP_PRIORITY 15 /* Restore original skb->priority. */
-#define ODPAT_N_ACTIONS 16
+#define ODPAT_DROP_SPOOFED_ARP 16 /* Drop ARPs with spoofed source MAC. */
+#define ODPAT_N_ACTIONS 17
struct odp_action_output {
uint16_t type; /* ODPAT_OUTPUT. */
uint16_t reserved2;
};
-struct odp_action_output_group {
- uint16_t type; /* ODPAT_OUTPUT_GROUP. */
- uint16_t group; /* Group number. */
- uint16_t reserved1;
- uint16_t reserved2;
-};
-
struct odp_action_controller {
uint16_t type; /* ODPAT_OUTPUT_CONTROLLER. */
uint16_t reserved;
ovs_be32 tun_id; /* Tunnel ID. */
};
-/* Action structure for ODPAT_SET_VLAN_VID. */
-struct odp_action_vlan_vid {
- uint16_t type; /* ODPAT_SET_VLAN_VID. */
- ovs_be16 vlan_vid; /* VLAN id. */
- uint16_t reserved1;
- uint16_t reserved2;
-};
-
-/* Action structure for ODPAT_SET_VLAN_PCP. */
-struct odp_action_vlan_pcp {
- uint16_t type; /* ODPAT_SET_VLAN_PCP. */
- uint8_t vlan_pcp; /* VLAN priority. */
- uint8_t reserved1;
- uint16_t reserved2;
- uint16_t reserved3;
+/* Action structure for ODPAT_SET_DL_TCI. */
+struct odp_action_dl_tci {
+ uint16_t type; /* ODPAT_SET_DL_TCI. */
+ ovs_be16 tci; /* New TCI. CFI bit must be zero. */
+ uint32_t reserved;
};
/* Action structure for ODPAT_SET_DL_SRC/DST. */
union odp_action {
uint16_t type;
struct odp_action_output output;
- struct odp_action_output_group output_group;
struct odp_action_controller controller;
struct odp_action_tunnel tunnel;
- struct odp_action_vlan_vid vlan_vid;
- struct odp_action_vlan_pcp vlan_pcp;
+ struct odp_action_dl_tci dl_tci;
struct odp_action_dl_addr dl_addr;
struct odp_action_nw_addr nw_addr;
struct odp_action_nw_tos nw_tos;
};
struct odp_execute {
- uint16_t in_port;
- uint16_t reserved1;
- uint32_t reserved2;
-
union odp_action *actions;
uint32_t n_actions;
*/
#define ODP_DL_TYPE_NOT_ETH_TYPE 0x05ff
-/* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate
- * special conditions. All ones indicates that no VLAN id was set.
- */
-#define ODP_VLAN_NONE 0xffff
-
#endif /* openvswitch/datapath-protocol.h */