umount /tmp/boot-media
rmdir /tmp/boot-media
else
- case $curl_err in
- 6)
- echo $(date "+%H:%M:%S") " This error likely indicates a networking configuration error. "
- echo $(date "+%H:%M:%S") " Please, check whether you can ping this machine. If you can, "
- echo $(date "+%H:%M:%S") " we recommend checking your DNS settings. If you cannot, then "
- echo $(date "+%H:%M:%S") " please double check your network settings registered at PLC and "
- echo $(date "+%H:%M:%S") " stored on this Boot Image."
- for file in `ls /etc/sysconfig/network-scripts/ifcfg-eth*` ; do
- echo $(date "+%H:%M:%S") $file :
- cat $file
- done
- ;;
- 60)
- echo $(date "+%H:%M:%S") " This error likely indicates that the hardware clock is not set "
- echo $(date "+%H:%M:%S") " to GMT. The result is that authentication between the local and "
- echo $(date "+%H:%M:%S") " remote site fails. Please double check this machine's system "
- echo $(date "+%H:%M:%S") " clock, and set it to GMT in the BIOS. If after rebooting the same "
- echo $(date "+%H:%M:%S") " error occurs, please report the situation to support@planet-lab.org "
- echo $(date "+%H:%M:%S") " with as much detail as possible."
- ;;
- *)
- echo $(date "+%H:%M:%S") " The best-practice approach for handling this error is not yet "
- echo $(date "+%H:%M:%S") " documented. Please report this error to support@planet-lab.org "
- echo $(date "+%H:%M:%S") " with as much detail as possible."
- ;;
- esac
+ case $curl_err in
+ 6)
+ echo $(date "+%H:%M:%S") " This error likely indicates a networking configuration error. "
+ echo $(date "+%H:%M:%S") " Please, check whether you can ping this machine. If you can, "
+ echo $(date "+%H:%M:%S") " we recommend checking your DNS settings. If you cannot, then "
+ echo $(date "+%H:%M:%S") " please double check your network settings registered at PLC and "
+ echo $(date "+%H:%M:%S") " stored on this Boot Image."
+ for file in `ls /etc/sysconfig/network-scripts/ifcfg-eth*` ; do
+ echo $(date "+%H:%M:%S") $file :
+ cat $file
+ done
+ ;;
+ 60)
+ echo $(date "+%H:%M:%S") " This error likely indicates that the hardware clock is not set "
+ echo $(date "+%H:%M:%S") " to GMT. The result is that authentication between the local and "
+ echo $(date "+%H:%M:%S") " remote site fails. Please double check this machine's system "
+ echo $(date "+%H:%M:%S") " clock, and set it to GMT in the BIOS. If after rebooting the same "
+ echo $(date "+%H:%M:%S") " error occurs, please report the situation to support@planet-lab.org "
+ echo $(date "+%H:%M:%S") " with as much detail as possible."
+ ;;
+ *)
+ echo $(date "+%H:%M:%S") " The best-practice approach for handling this error is not yet "
+ echo $(date "+%H:%M:%S") " documented. Please report this error to support@planet-lab.org "
+ echo $(date "+%H:%M:%S") " with as much detail as possible."
+ ;;
+ esac
continue
fi
elif [ -n "$DISCONNECTED_OPERATION" ]; then