verbose-message "pl_netinit: looking for node configuration file on floppy"
/bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES /dev/fd0 \
- $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
+ $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
if [[ $? -eq 0 ]]; then
# 1. check for new named file first on the floppy disk
- if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
- conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
- verbose-message "pl_netinit: found node configuration file $conf_file"
- /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
- /bin/umount $CONF_DEVICE_MOUNT_POINT
- return 1
+ if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ verbose-message "pl_netinit: found node configuration file $conf_file"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ return 1
# since we have the floppy mounted already, see if an old file
# exists there so we don't have to remount the floppy when we need
# to check for an old file on it (later in the order). if it does
# just copy it off to a special location
- elif [ -r "$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME" ]; then
- conf_file="$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME"
- /bin/cp -f $conf_file $TMP_OLD_FLOPPY_CONF_FILE
- verbose-message "pl_netinit: found old named configuration file, checking later."
- else
- verbose-message "pl_netinit: floppy mounted, but no configuration file."
- fi
-
- /bin/umount $CONF_DEVICE_MOUNT_POINT
+ elif [ -r "$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME" ]; then
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$OLD_NODE_CONF_NAME"
+ /bin/cp -f $conf_file $TMP_OLD_FLOPPY_CONF_FILE
+ verbose-message "pl_netinit: found old named configuration file, checking later."
+ else
+ verbose-message "pl_netinit: floppy mounted, but no configuration file."
+ fi
+
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
else
- verbose-message "pl_netinit: no floppy could be mounted, continuing search."
+ verbose-message "pl_netinit: no floppy could be mounted, continuing search."
fi
# 2. check for a new named file on removable flash devices (those
shopt -s nullglob
for device in /sys/block/[hsv]d*; do
- removable=$(cat $device/removable)
- if [[ $removable -ne 1 ]]; then
- continue
- fi
-
- partitions=$(/bin/awk "\$4 ~ /$(basename $device)[0-9]*/ { print \$4 }" /proc/partitions)
- for partition in $partitions ; do
- check_dev=/dev/$partition
-
- verbose-message "pl_netinit: looking for node configuration file on device $check_dev"
- /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES $check_dev \
- $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
- if [[ $? -eq 0 ]]; then
- if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
- conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
- verbose-message "pl_netinit: found node configuration file $conf_file"
- /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
- verbose-message "pl_netinit: found configuration"
- /bin/umount $CONF_DEVICE_MOUNT_POINT
- return 1
- fi
-
- verbose-message "pl_netinit: ERROR - not found"
-
- /bin/umount $CONF_DEVICE_MOUNT_POINT
- fi
- done
+ removable=$(cat $device/removable)
+ if [[ $removable -ne 1 ]]; then
+ continue
+ fi
+
+ partitions=$(/bin/awk "\$4 ~ /$(basename $device)[0-9]*/ { print \$4 }" /proc/partitions)
+ for partition in $partitions ; do
+ check_dev=/dev/$partition
+
+ verbose-message "pl_netinit: looking for node configuration file on device $check_dev"
+ /bin/mount -o ro -t $NODE_CONF_DEVICE_FS_TYPES $check_dev \
+ $CONF_DEVICE_MOUNT_POINT 2>&1 > /dev/null
+ if [[ $? -eq 0 ]]; then
+ if [ -r "$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME" ]; then
+ conf_file="$CONF_DEVICE_MOUNT_POINT/$NEW_NODE_CONF_NAME"
+ verbose-message "pl_netinit: found node configuration file $conf_file"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ verbose-message "pl_netinit: found configuration"
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ return 1
+ fi
+
+ verbose-message "pl_netinit: ERROR - not found"
+
+ /bin/umount $CONF_DEVICE_MOUNT_POINT
+ fi
+ done
done
# normal filename expansion setting
# 3. see if there is an old file on the floppy disk. if there was,
# the file $TMP_OLD_FLOPPY_CONF_FILE will be readable.
if [ -r "$TMP_OLD_FLOPPY_CONF_FILE" ]; then
- conf_file=$TMP_OLD_FLOPPY_CONF_FILE
- verbose-message "pl_netinit: found node configuration file $conf_file"
- /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
- return 1
+ conf_file=$TMP_OLD_FLOPPY_CONF_FILE
+ verbose-message "pl_netinit: found node configuration file $conf_file"
+ /etc/init.d/pl_validateconf < $conf_file > $USED_NET_CONF
+ return 1
fi
verbose-message "pl_netinit: looking for network configuration on cd in /usr/boot"
if [ -r "$CD_NET_CONF_BOOT" ]; then
- verbose-message "pl_netinit: found cd configuration file $CD_NET_BOOT_CONF"
- /etc/init.d/pl_validateconf < $CD_NET_CONF_BOOT > $USED_NET_CONF
- return 1
+ verbose-message "pl_netinit: found cd configuration file $CD_NET_BOOT_CONF"
+ /etc/init.d/pl_validateconf < $CD_NET_CONF_BOOT > $USED_NET_CONF
+ return 1
fi
verbose-message "pl_netinit: looking for network configuration on cd in /usr"
if [ -r "$CD_NET_CONF_ROOT" ]; then
- verbose-message "pl_netinit: found cd configuration file $CD_NET_CONF_ROOT"
- /etc/init.d/pl_validateconf < $CD_NET_CONF_ROOT > $USED_NET_CONF
- return 1
+ verbose-message "pl_netinit: found cd configuration file $CD_NET_CONF_ROOT"
+ /etc/init.d/pl_validateconf < $CD_NET_CONF_ROOT > $USED_NET_CONF
+ return 1
fi
# can inform the users appropriately.
verbose-message "pl_netinit: using default network configuration"
if [ -r "$FALLBACK_NET_CONF" ]; then
- verbose-message "pl_netinit: found cd default configuration file $FALLBACK_NET_CONF"
- /etc/init.d/pl_validateconf < $FALLBACK_NET_CONF > $USED_NET_CONF
- DEFAULT_NET_CONF=1
- return 1
+ verbose-message "pl_netinit: found cd default configuration file $FALLBACK_NET_CONF"
+ /etc/init.d/pl_validateconf < $FALLBACK_NET_CONF > $USED_NET_CONF
+ DEFAULT_NET_CONF=1
+ return 1
fi
return 0
echo -n "pl_netinit: initializing IPMI: "
cmd="ipnmac -i $IPMI_ADDRESS"
if [[ -n "$IPMI_MAC" ]] ; then
- cmd="$cmd -m $IPMI_MAC"
+ cmd="$cmd -m $IPMI_MAC"
fi
echo $cmd
$cmd
pushd /sys/class/net
for device in *; do
- dev_address=$(cat $device/address | tr A-Z a-z)
- if [ "$device" == "$NET_DEVICE" -o "$dev_address" == "$NET_DEVICE" ]; then
- ETH_DEVICE=$device
- verbose-message "pl_netinit: found device $ETH_DEVICE with mac address $dev_address"
- break
- fi
+ dev_address=$(cat $device/address | tr A-Z a-z)
+ if [ "$device" == "$NET_DEVICE" -o "$dev_address" == "$NET_DEVICE" ]; then
+ ETH_DEVICE=$device
+ verbose-message "pl_netinit: found device $ETH_DEVICE with mac address $dev_address"
+ break
+ fi
done
popd
fi
if [[ -z "$ETH_DEVICE" ]]; then
pushd /etc/sysconfig/network-scripts > /dev/null
for conf in ifcfg-*; do
- egrep -q '^PRIMARY=["'"'"']?[yY1t]' $conf || continue
- ETH_DEVICE=${conf#ifcfg-}
- break
+ egrep -q '^PRIMARY=["'"'"']?[yY1t]' $conf || continue
+ ETH_DEVICE=${conf#ifcfg-}
+ break
done
popd > /dev/null
fi
needed=""
# missing file : patch needed
if ! [ -f $file ]; then
- needed=true
+ needed=true
# empty file : patch needed
else
- contents=$(grep -v '^#' $file)
- contents=$(echo $contents)
- [ -z "$contents" ] && needed=true
+ contents=$(grep -v '^#' $file)
+ contents=$(echo $contents)
+ [ -z "$contents" ] && needed=true
fi
if [ -z "$needed" ]; then
- echo pl_netinit has no need to patch $file
- return
+ echo pl_netinit has no need to patch $file
+ return
fi
verbose-message "pl_netinit: patching $file"