from nodequery import verify,query_to_dict,node_select
-from nodecommon import *
+from monitor.common import *
from monitor import config
from monitor.wrapper import plc,plccache
round = 1
count = 0
+def main():
+ main2(config)
-def main(config):
+def main2(config):
l_plcnodes = plccache.l_nodes
l_nodes = get_nodeset(config)
checkAndRecordState(l_nodes, l_plcnodes)
+# Node states:
+
+def check_node_state(rec, node):
+
+ node_state = rec.observed_status
+ if rec.plc_node_stats:
+ print rec.plc_node_stats
+ boot_state = rec.plc_node_stats['boot_state']
+ last_contact = rec.plc_node_stats['last_contact']
+ node.plc_nodeid = rec.plc_node_stats['node_id']
+ else:
+ boot_state = "unknown"
+ last_contact = None
+
+ if boot_state == 'disable': boot_state = 'disabled'
+ if boot_state == 'diag' or boot_state == 'diagnose': boot_state = 'safeboot'
+
+ if len(rec.plc_node_stats['pcu_ids']) > 0:
+ node.haspcu = True
+ else:
+ node.haspcu = False
+
+
+ # NOTE: 'DOWN' and 'DEBUG' are temporary states, so only need
+ # 'translations' into the node.status state
+ # 'BOOT' is a permanent state, but we want it to have a bit of
+ # hysteresis (less than 0.5 days)
+
+ #################################################################
+ # "Initialize" the findbad states into nodebad status if they are not already set
+
+ if node_state == 'DOWN':
+ if boot_state == 'disabled' and changed_lessthan(node.last_changed, 60) and \
+ node.status != 'disabled':
+ # NOTE: if changed less than 2 months, then we can allow this.
+ # otherwise, apply 'down' status after greater than 2 months (below).
+
+ print "changed status from %s to %s" % (node.status, boot_state)
+ node.status = boot_state
+ node.last_changed = datetime.now()
+
+ if node.status not in ['offline', 'down', 'disabled']:
+ print "changed status from %s to offline" % node.status
+ node.status = 'offline'
+ node.last_changed = datetime.now()
+
+
+ #if node_state == 'DOWN' and node.status not in ['offline', 'down', 'disabled']:
+ # if boot_state != 'disabled':
+ # print "changed status from %s to offline" % node.status
+ # node.status = 'offline'
+ # node.last_changed = datetime.now()
+ # else:
+ # print "changed status from %s to %s" % (node.status, boot_state)
+ # node.status = boot_state
+ # node.last_changed = datetime.now()
+
+ if node_state == 'DEBUG' and node.status != 'monitordebug' and \
+ node.status != 'disabled' and \
+ node.status != 'safeboot':
+ if boot_state != 'disabled' and boot_state != 'safeboot':
+
+ print "changed status from %s to monitordebug" % (node.status)
+ node.status = "monitordebug"
+ node.last_changed = datetime.now()
+ else:
+ print "changed status from %s to %s" % (node.status, boot_state)
+ node.status = boot_state
+ node.last_changed = datetime.now()
+
+ if node_state == 'BOOT' and node.status != 'online' and node.status != 'good':
+ print "changed status from %s to online" % node.status
+ node.status = 'online'
+ node.last_changed = datetime.now()
+
+ #################################################################
+ # Switch temporary hystersis states into their 'firm' states.
+ # online -> good after half a day
+ # offline -> down after two days
+ # monitordebug -> down after 30 days
+ # safeboot -> monitordebug after 60 days
+ # disabled -> down after 60 days
+
+ if node.status == 'online' and changed_greaterthan(node.last_changed, 0.5):
+ print "changed status from %s to good" % node.status
+ node.status = 'good'
+ # NOTE: do not reset last_changed, or you lose how long it's been up.
+
+ if node.status == 'offline' and changed_greaterthan(node.last_changed, 2):
+ print "changed status from %s to down" % node.status
+ node.status = 'down'
+ # NOTE: do not reset last_changed, or you lose how long it's been down.
+
+ if node.status == 'monitordebug' and changed_greaterthan(node.last_changed, 30):
+ print "changed status from %s to down" % node.status
+ node.status = 'down'
+ # NOTE: do not reset last_changed, or you lose how long it's been down.
+
+ if node.status == 'safeboot' and changed_greaterthan(node.last_changed, 60):
+ print "changed status from %s to down" % node.status
+ # NOTE: change an admin mode back into monitordebug after two months.
+ node.status = 'monitordebug'
+ node.last_changed = datetime.now()
+
+ # extreme cases of offline nodes
+ if ( boot_state == 'disabled' or last_contact == None ) and \
+ changed_greaterthan(node.last_changed, 2*30) and \
+ node.status != 'down':
+ print "changed status from %s to down" % node.status
+ node.status = 'down'
+ node.last_changed = datetime.now()
+
def checkAndRecordState(l_nodes, l_plcnodes):
global count
for nodename in l_nodes:
- d_node = None
- for node in l_plcnodes:
- if node['hostname'] == nodename:
- d_node = node
- break
- if not d_node:
- continue
- pf = HistoryNodeRecord.findby_or_create(hostname=nodename)
- pf.last_checked = datetime.now()
+ nodehist = HistoryNodeRecord.findby_or_create(hostname=nodename,
+ if_new_set={'status' : 'offline',
+ 'last_changed' : datetime.now()})
+ nodehist.last_checked = datetime.now()
try:
# Find the most recent record
- noderec = FindbadNodeRecord.query.filter(FindbadNodeRecord.hostname==nodename).order_by(FindbadNodeRecord.date_checked.desc()).first()
- #print "NODEREC: ", noderec.date_checked
+ noderec = FindbadNodeRecord.get_latest_by(hostname=nodename)
except:
print "COULD NOT FIND %s" % nodename
import traceback
+ email_exception()
print traceback.print_exc()
continue
print "none object for %s"% nodename
continue
- node_state = noderec.observed_status
- if noderec.plc_node_stats:
- boot_state = noderec.plc_node_stats['boot_state']
- else:
- boot_state = "unknown"
-
- if node_state == "BOOT":
- if pf.status != "good":
- pf.last_changed = datetime.now()
- pf.status = "good"
- elif node_state == "DEBUG":
- if pf.status != boot_state:
- pf.last_changed = datetime.now()
- pf.status = boot_state
- else:
- if pf.status != "down":
- pf.last_changed = datetime.now()
- pf.status = "down"
+ check_node_state(noderec, nodehist)
count += 1
- print "%d %35s %s since(%s)" % (count, nodename, pf.status, diff_time(time.mktime(pf.last_changed.timetuple())))
+ print "%d %35s %s since(%s)" % (count, nodename, nodehist.status, diff_time(time.mktime(nodehist.last_changed.timetuple())))
- # NOTE: this commits all pending operations to the DB. Do not remove, or
- # replace with another operations that also commits all pending ops, such
- # as session.commit() or flush() or something
- print HistoryNodeRecord.query.count()
+ # NOTE: this commits all pending operations to the DB. Do not remove.
session.flush()
return True
config = parsermodule.parse_args(parser)
try:
- main(config)
+ main2(config)
except Exception, err:
import traceback
print traceback.print_exc()