config SOUND_CMPCI_FM
bool "Enable legacy FM"
- depends on SOUND_CMPCI
+ depends on SOUND_CMPCI && X86
help
- Say Y here to enable the legacy FM (frequency-modulation) synthesis
- support on a card using the CMI8338 or CMI8378 chipset.
+ Say Y here to enable the legacy FM (frequency-modulation) synthesizer
+ support on a card using the CMI8338 or CMI8378 chipset. Even it is
+ enabled, you need to set fmio as proper value to enable it.
Say N here if you don't need this.
-config SOUND_CMPCI_FMIO
- hex "FM I/O 388, 3C8, 3E0, 3E8"
- depends on SOUND_CMPCI_FM
- default "388"
- help
- Set the base I/O address for FM synthesis control on a card using
- the CMI8338 or CMI8378 chipset.
- The default is 388; other choices are 3c8, 3e0, or 3e8.
-
config SOUND_CMPCI_MIDI
bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI
+ depends on SOUND_CMPCI && X86
help
- Say Y here to enable the legacy MP401 MIDI synthesis support on a
- card using the CMI8338 or CMI8378 chipset.
+ Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
+ card using the CMI8338 or CMI8378 chipset. Even it is enabled,
+ you need to set mpuio as proper value to enable it.
Say N here if you don't need this.
-config SOUND_CMPCI_MPUIO
- hex "MPU-401 I/O 330, 320, 310, 300"
- depends on SOUND_CMPCI_MIDI
- default "330"
- help
- Set the base I/O address for MP401 MIDI synthesis control on a card
- using the CMI8338 or CMI8378 chipset.
- The default is 330; other choices are 320, 310, or 300.
-
config SOUND_CMPCI_JOYSTICK
bool "Enable joystick"
- depends on SOUND_CMPCI
- help
- Say here in order to enable the joystick port on a sound crd using
- the CMI8338 or the CMI8738 chipset. Data on these chips are
- available at <http://www.cmedia.com.tw/>.
-
-config SOUND_CMPCI_CM8738
- bool "Support CMI8738 based audio cards"
- depends on SOUND_CMPCI
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8378 chipset. Data on this chip is available at
- <http://www.cmedia.com.tw/doc8738.htm>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_SPDIFINVERSE
- bool "Inverse S/PDIF in for CMI8738"
- depends on SOUND_CMPCI_CM8738
+ depends on SOUND_CMPCI && X86
help
- Say Y here to have the driver invert the signal presented on SPDIF IN
- of a card using the CMI8338 or CMI8378 chipset.
+ Say Y here in order to enable the joystick port on a sound card using
+ the CMI8338 or the CMI8738 chipset. You need to config the
+ gameport support and set joystick parameter as 1 to use it.
Say N here if you don't need this.
-config SOUND_CMPCI_SPDIFLOOP
- bool "Enable S/PDIF loop for CMI8738"
- depends on SOUND_CMPCI_CM8738
- help
- Enable loopback from SPDIF in to SPDIF out. For discussion, see
- "The 8738 Audio SPDIF In/Out Technical Data" on the technical
- support page at <http://www.cmedia.com.tw/>.
-
- A userspace utility to control even more internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
- This package will among other things help you enable SPDIF
- out/in/loop/monitor.
-
-config SOUND_CMPCI_SPEAKERS
- int "Number of speakers 2, 4, 5, 6"
- depends on SOUND_CMPCI_CM8738
- default "2"
- help
- Specify the number of speaker channels you want the card to drive,
- as an integer.
-
-config SOUND_CMPCI_LINE_REAR
- bool "Use Line-in as Read-out"
- depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
- help
- Say Y here to enable using line-in jack as an output jack for a rear
- speaker. Say N here if you don't need this.
-
-config SOUND_CMPCI_LINE_BASS
- bool "Use Line-in as Bass"
- depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
- help
- Say Y here to enable using line-in jack as an output jack for a bass
- speaker. Say N here if you don't need this.
-
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
depends on SOUND_PRIME!=n && SOUND && PCI