--- /dev/null
+/*
+ * GRUB -- GRand Unified Bootloader
+ * Copyright (C) 2000 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * The structure type "mod_list" is used by the "multiboot_info" structure.
+ */
+
+struct mod_list
+{
+ /* the memory used goes from bytes 'mod_start' to 'mod_end-1' inclusive */
+ unsigned long mod_start;
+ unsigned long mod_end;
+
+ /* Module command line */
+ unsigned long cmdline;
+
+ /* padding to take it to 16 bytes (must be zero) */
+ unsigned long pad;
+};
+
+
+/*
+ * INT-15, AX=E820 style "AddressRangeDescriptor"
+ * ...with a "size" parameter on the front which is the structure size - 4,
+ * pointing to the next one, up until the full buffer length of the memory
+ * map has been reached.
+ */
+
+struct AddrRangeDesc
+{
+ unsigned long size;
+ unsigned long long BaseAddr;
+ unsigned long long Length;
+ unsigned long Type;
+
+ /* unspecified optional padding... */
+};
+
+/* usable memory "Type", all others are reserved. */
+#define MB_ARD_MEMORY 1
+
+
+/* Drive Info structure. */
+struct drive_info
+{
+ /* The size of this structure. */
+ unsigned long size;
+
+ /* The BIOS drive number. */
+ unsigned char drive_number;
+
+ /* The access mode (see below). */
+ unsigned char drive_mode;
+
+ /* The BIOS geometry. */
+ unsigned short drive_cylinders;
+ unsigned char drive_heads;
+ unsigned char drive_sectors;
+
+ /* The array of I/O ports used for the drive. */
+ unsigned short drive_ports[0];
+};
+
+/* Drive Mode. */
+#define MB_DI_CHS_MODE 0
+#define MB_DI_LBA_MODE 1
+
+
+/* APM BIOS info. */
+struct apm_info
+{
+ unsigned short version;
+ unsigned short cseg;
+ unsigned long offset;
+ unsigned short cseg_16;
+ unsigned short dseg_16;
+ unsigned short cseg_len;
+ unsigned short cseg_16_len;
+ unsigned short dseg_16_len;
+};
+
+
+/*
+ * MultiBoot Info description
+ *
+ * This is the struct passed to the boot image. This is done by placing
+ * its address in the EAX register.
+ */
+
+struct multiboot_info
+{
+ /* MultiBoot info version number */
+ unsigned long flags;
+
+ /* Available memory from BIOS */
+ unsigned long mem_lower;
+ unsigned long mem_upper;
+
+ /* "root" partition */
+ unsigned long boot_device;
+
+ /* Kernel command line */
+ unsigned long cmdline;
+
+ /* Boot-Module list */
+ unsigned long mods_count;
+ unsigned long mods_addr;
+
+ union
+ {
+ struct
+ {
+ /* (a.out) Kernel symbol table info */
+ unsigned long tabsize;
+ unsigned long strsize;
+ unsigned long addr;
+ unsigned long pad;
+ }
+ a;
+
+ struct
+ {
+ /* (ELF) Kernel section header table */
+ unsigned long num;
+ unsigned long size;
+ unsigned long addr;
+ unsigned long shndx;
+ }
+ e;
+ }
+ syms;
+
+ /* Memory Mapping buffer */
+ unsigned long mmap_length;
+ unsigned long mmap_addr;
+
+ /* Drive Info buffer */
+ unsigned long drives_length;
+ unsigned long drives_addr;
+
+ /* ROM configuration table */
+ unsigned long config_table;
+
+ /* Boot Loader Name */
+ unsigned long boot_loader_name;
+
+ /* APM table */
+ unsigned long apm_table;
+
+ /* Video */
+ unsigned long vbe_control_info;
+ unsigned long vbe_mode_info;
+ unsigned short vbe_mode;
+ unsigned short vbe_interface_seg;
+ unsigned short vbe_interface_off;
+ unsigned short vbe_interface_len;
+};
+
+/*
+ * Flags to be set in the 'flags' parameter above
+ */
+
+/* is there basic lower/upper memory information? */
+#define MB_INFO_MEMORY 0x00000001
+/* is there a boot device set? */
+#define MB_INFO_BOOTDEV 0x00000002
+/* is the command-line defined? */
+#define MB_INFO_CMDLINE 0x00000004
+/* are there modules to do something with? */
+#define MB_INFO_MODS 0x00000008
+
+/* These next two are mutually exclusive */
+
+/* is there a symbol table loaded? */
+#define MB_INFO_AOUT_SYMS 0x00000010
+/* is there an ELF section header table? */
+#define MB_INFO_ELF_SHDR 0x00000020
+
+/* is there a full memory map? */
+#define MB_INFO_MEM_MAP 0x00000040
+
+/* Is there drive info? */
+#define MB_INFO_DRIVE_INFO 0x00000080
+
+/* Is there a config table? */
+#define MB_INFO_CONFIG_TABLE 0x00000100
+
+/* Is there a boot loader name? */
+#define MB_INFO_BOOT_LOADER_NAME 0x00000200
+
+/* Is there a APM table? */
+#define MB_INFO_APM_TABLE 0x00000400
+
+/* Is there video information? */
+#define MB_INFO_VIDEO_INFO 0x00000800
+
+/*
+ * The following value must be present in the EAX register.
+ */
+
+#define MULTIBOOT_VALID 0x2BADB002
git://git.onelab.eu / bootcd.git / blobdiff