X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;ds=sidebyside;f=arch%2Fsh%2Fboards%2Fse%2F7751%2Fio.c;h=e8d846cec89d1b82c6d323a22e4f0e74c7abea54;hb=refs%2Fheads%2Fvserver;hp=99041b26926121f33be525e3432daaa656a11f7f;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c index 99041b269..e8d846cec 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/se/7751/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,96 +8,21 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include #include +#include #include -#include +#include #include -#include -#include "../../../drivers/pci/pci-sh7751.h" - -#if 0 -/****************************************************************** - * Variables from io_se.c, related to PCMCIA (not PCI); we're not - * compiling them in, and have removed references from functions - * which follow. [Many checked for IO ports in the range bounded - * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. - * As start/stop are uninitialized, only port 0x0 would match?] - * When used, remember to adjust names to avoid clash with io_se? - *****************************************************************/ -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; -/*************************************************************/ -#endif - -/* - * The 7751 Solution Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -static inline volatile __u16 * -port2adr(unsigned int port) +static inline volatile u16 *port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#if 0 - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } -#if 0 -/* The 7751 Solution Engine seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -111,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char sh7751se_inb_p(unsigned long port) @@ -123,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port)) & 0xff; + ctrl_delay(); return v; } @@ -135,12 +58,12 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -148,12 +71,12 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -162,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -172,73 +95,41 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void sh7751se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); }