X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fata%2Fpata_winbond.c;fp=drivers%2Fata%2Fpata_winbond.c;h=5d1f518e1cc7ab1d119e08f372004a28afbc840c;hb=76828883507a47dae78837ab5dec5a5b4513c667;hp=0000000000000000000000000000000000000000;hpb=64ba3f394c830ec48a1c31b53dcae312c56f1604;p=linux-2.6.git diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c new file mode 100644 index 000000000..5d1f518e1 --- /dev/null +++ b/drivers/ata/pata_winbond.c @@ -0,0 +1,306 @@ +/* + * pata_winbond.c - Winbond VLB ATA controllers + * (C) 2006 Red Hat + * + * Support for the Winbond 83759A when operating in advanced mode. + * Multichip mode is not currently supported. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_winbond" +#define DRV_VERSION "0.0.1" + +#define NR_HOST 4 /* Two winbond controllers, two channels each */ + +struct winbond_data { + unsigned long config; + struct platform_device *platform_dev; +}; + +static struct ata_host *winbond_host[NR_HOST]; +static struct winbond_data winbond_data[NR_HOST]; +static int nr_winbond_host; + +#ifdef MODULE +static int probe_winbond = 1; +#else +static int probe_winbond; +#endif + +static spinlock_t winbond_lock = SPIN_LOCK_UNLOCKED; + +static void winbond_writecfg(unsigned long port, u8 reg, u8 val) +{ + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + outb(val, port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); +} + +static u8 winbond_readcfg(unsigned long port, u8 reg) +{ + u8 val; + + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + val = inb(port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); + + return val; +} + +static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct winbond_data *winbond = ap->host->private_data; + int active, recovery; + u8 reg; + int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); + + reg = winbond_readcfg(winbond->config, 0x81); + + /* Get the timing data in cycles */ + if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + else + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + active = (FIT(t.active, 3, 17) - 1) & 0x0F; + recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + timing = (active << 4) | recovery; + winbond_writecfg(winbond->config, timing, reg); + + /* Load the setup timing */ + + reg = 0x35; + if (adev->class != ATA_DEV_ATA) + reg |= 0x08; /* FIFO off */ + if (!ata_pio_need_iordy(adev)) + reg |= 0x02; /* IORDY off */ + reg |= (FIT(t.setup, 0, 3) << 6); + winbond_writecfg(winbond->config, timing + 1, reg); +} + + +static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + int slop = buflen & 3; + + if (ata_id_has_dword_io(adev->id)) { + if (write_data) + outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + else + insl(ap->ioaddr.data_addr, buf, buflen >> 2); + + if (unlikely(slop)) { + u32 pad; + if (write_data) { + memcpy(&pad, buf + buflen - slop, slop); + outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + } else { + pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + memcpy(buf + buflen - slop, &pad, slop); + } + } + } else + ata_pio_data_xfer(adev, buf, buflen, write_data); +} + +static struct scsi_host_template winbond_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations winbond_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = winbond_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = winbond_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * winbond_init_one - attach a winbond interface + * @type: Type to display + * @io: I/O port start + * @irq: interrupt line + * @fast: True if on a > 33Mhz VLB + * + * Register a VLB bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int winbond_init_one(unsigned long port) +{ + struct ata_probe_ent ae; + struct platform_device *pdev; + int ret; + u8 reg; + int i; + + reg = winbond_readcfg(port, 0x81); + reg |= 0x80; /* jumpered mode off */ + winbond_writecfg(port, 0x81, reg); + reg = winbond_readcfg(port, 0x83); + reg |= 0xF0; /* local control */ + winbond_writecfg(port, 0x83, reg); + reg = winbond_readcfg(port, 0x85); + reg |= 0xF0; /* programmable timing */ + winbond_writecfg(port, 0x85, reg); + + reg = winbond_readcfg(port, 0x81); + + if (!(reg & 0x03)) /* Disabled */ + return 0; + + for (i = 0; i < 2 ; i ++) { + + if (reg & (1 << i)) { + /* + * Fill in a probe structure first of all + */ + + pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + memset(&ae, 0, sizeof(struct ata_probe_ent)); + INIT_LIST_HEAD(&ae.node); + ae.dev = &pdev->dev; + + ae.port_ops = &winbond_port_ops; + ae.pio_mask = 0x1F; + + ae.sht = &winbond_sht; + + ae.n_ports = 1; + ae.irq = 14 + i; + ae.irq_flags = 0; + ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ae.port[0].cmd_addr = 0x1F0 - (0x80 * i); + ae.port[0].altstatus_addr = ae.port[0].cmd_addr + 0x0206; + ae.port[0].ctl_addr = ae.port[0].altstatus_addr; + ata_std_ports(&ae.port[0]); + /* + * Hook in a private data structure per channel + */ + ae.private_data = &winbond_data[nr_winbond_host]; + winbond_data[nr_winbond_host].config = port; + winbond_data[nr_winbond_host].platform_dev = pdev; + + ret = ata_device_add(&ae); + if (ret == 0) { + platform_device_unregister(pdev); + return -ENODEV; + } + winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); + } + } + + return 0; +} + +/** + * winbond_init - attach winbond interfaces + * + * Attach winbond IDE interfaces by scanning the ports it may occupy. + */ + +static __init int winbond_init(void) +{ + static const unsigned long config[2] = { 0x130, 0x1B0 }; + + int ct = 0; + int i; + + if (probe_winbond == 0) + return -ENODEV; + + /* + * Check both base addresses + */ + + for (i = 0; i < 2; i++) { + if (probe_winbond & (1<