X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fmedia%2Fdvb%2Ffrontends%2For51132.c;h=d20ab30c1e8341d37af3600a41d97bb1ff02a7c1;hb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;hp=80e0f28127b7bd44b51cb19cc1d7df730983117f;hpb=4e76c8a9fa413ccc09d3f7f664183dcce3555d57;p=linux-2.6.git diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index 80e0f2812..d20ab30c1 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -54,7 +54,6 @@ static int debug; struct or51132_state { struct i2c_adapter* i2c; - struct dvb_frontend_ops ops; /* Configuration settings */ const struct or51132_config* config; @@ -106,9 +105,8 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware { struct or51132_state* state = fe->demodulator_priv; static u8 run_buf[] = {0x7F,0x01}; - static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; - u8 rec_buf[14]; - u8 cmd_buf[14]; + u8 rec_buf[8]; + u8 cmd_buf[3]; u32 firmwareAsize, firmwareBsize; int i,ret; @@ -157,7 +155,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware cmd_buf[0] = 0x10; cmd_buf[1] = 0x10; cmd_buf[2] = 0x00; - cmd_buf[3] = 0x00; msleep(20); /* 20ms */ if ((ret = i2c_writebytes(state,state->config->demod_address, cmd_buf,3))) { @@ -167,8 +164,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware cmd_buf[0] = 0x04; cmd_buf[1] = 0x17; - cmd_buf[2] = 0x00; - cmd_buf[3] = 0x00; msleep(20); /* 20ms */ if ((ret = i2c_writebytes(state,state->config->demod_address, cmd_buf,2))) { @@ -178,8 +173,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware cmd_buf[0] = 0x00; cmd_buf[1] = 0x00; - cmd_buf[2] = 0x00; - cmd_buf[3] = 0x00; msleep(20); /* 20ms */ if ((ret = i2c_writebytes(state,state->config->demod_address, cmd_buf,2))) { @@ -189,7 +182,11 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware for(i=0;i<4;i++) { msleep(20); /* 20ms */ - get_ver_buf[4] = i+1; + /* Once upon a time, this command might have had something + to do with getting the firmware version, but it's + not used anymore: + {0x04,0x00,0x30,0x00,i+1} */ + /* Read 8 bytes, two bytes at a time */ if ((ret = i2c_readbytes(state,state->config->demod_address, &rec_buf[i*2],2))) { printk(KERN_WARNING @@ -208,7 +205,6 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware cmd_buf[0] = 0x10; cmd_buf[1] = 0x00; cmd_buf[2] = 0x00; - cmd_buf[3] = 0x00; msleep(20); /* 20ms */ if ((ret = i2c_writebytes(state,state->config->demod_address, cmd_buf,3))) { @@ -243,7 +239,7 @@ static int or51132_sleep(struct dvb_frontend* fe) static int or51132_setmode(struct dvb_frontend* fe) { struct or51132_state* state = fe->demodulator_priv; - unsigned char cmd_buf[4]; + unsigned char cmd_buf[3]; dprintk("setmode %d\n",(int)state->current_modulation); /* set operation mode in Receiver 1 register; */ @@ -263,7 +259,6 @@ static int or51132_setmode(struct dvb_frontend* fe) default: printk("setmode:Modulation set to unsupported value\n"); }; - cmd_buf[3] = 0x00; if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { printk(KERN_WARNING "or51132: set_mode error 1\n"); @@ -301,7 +296,6 @@ static int or51132_setmode(struct dvb_frontend* fe) default: printk("setmode: Modulation set to unsupported value\n"); }; - cmd_buf[3] = 0x00; msleep(20); /* 20ms */ if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { @@ -313,52 +307,65 @@ static int or51132_setmode(struct dvb_frontend* fe) return 0; } +/* Some modulations use the same firmware. This classifies modulations + by the firmware they use. */ +#define MOD_FWCLASS_UNKNOWN 0 +#define MOD_FWCLASS_VSB 1 +#define MOD_FWCLASS_QAM 2 +static int modulation_fw_class(fe_modulation_t modulation) +{ + switch(modulation) { + case VSB_8: + return MOD_FWCLASS_VSB; + case QAM_AUTO: + case QAM_64: + case QAM_256: + return MOD_FWCLASS_QAM; + default: + return MOD_FWCLASS_UNKNOWN; + } +} + static int or51132_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { int ret; - u8 buf[4]; struct or51132_state* state = fe->demodulator_priv; const struct firmware *fw; - - /* Change only if we are actually changing the modulation */ - if (state->current_modulation != param->u.vsb.modulation) { - switch(param->u.vsb.modulation) { - case VSB_8: + const char *fwname; + int clock_mode; + + /* Upload new firmware only if we need a different one */ + if (modulation_fw_class(state->current_modulation) != + modulation_fw_class(param->u.vsb.modulation)) { + switch(modulation_fw_class(param->u.vsb.modulation)) { + case MOD_FWCLASS_VSB: dprintk("set_parameters VSB MODE\n"); - printk("or51132: Waiting for firmware upload(%s)...\n", - OR51132_VSB_FIRMWARE); - ret = request_firmware(&fw, OR51132_VSB_FIRMWARE, - &state->i2c->dev); - if (ret){ - printk(KERN_WARNING "or51132: No firmware up" - "loaded(timeout or file not found?)\n"); - return ret; - } + fwname = OR51132_VSB_FIRMWARE; + /* Set non-punctured clock for VSB */ - state->config->set_ts_params(fe, 0); + clock_mode = 0; break; - case QAM_AUTO: - case QAM_64: - case QAM_256: + case MOD_FWCLASS_QAM: dprintk("set_parameters QAM MODE\n"); - printk("or51132: Waiting for firmware upload(%s)...\n", - OR51132_QAM_FIRMWARE); - ret = request_firmware(&fw, OR51132_QAM_FIRMWARE, - &state->i2c->dev); - if (ret){ - printk(KERN_WARNING "or51132: No firmware up" - "loaded(timeout or file not found?)\n"); - return ret; - } + fwname = OR51132_QAM_FIRMWARE; + /* Set punctured clock for QAM */ - state->config->set_ts_params(fe, 1); + clock_mode = 1; break; default: - printk("or51132:Modulation type(%d) UNSUPPORTED\n", + printk("or51132: Modulation type(%d) UNSUPPORTED\n", param->u.vsb.modulation); return -1; - }; + } + printk("or51132: Waiting for firmware upload(%s)...\n", + fwname); + ret = request_firmware(&fw, fwname, &state->i2c->dev); + if (ret) { + printk(KERN_WARNING "or51132: No firmware up" + "loaded(timeout or file not found?)\n"); + return ret; + } ret = or51132_load_firmware(fe, fw); release_firmware(fw); if (ret) { @@ -367,18 +374,18 @@ static int or51132_set_parameters(struct dvb_frontend* fe, return ret; } printk("or51132: Firmware upload complete.\n"); - + state->config->set_ts_params(fe, clock_mode); + } + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != param->u.vsb.modulation) { state->current_modulation = param->u.vsb.modulation; or51132_setmode(fe); } - dvb_pll_configure(state->config->pll_desc, buf, - param->frequency, 0); - dprintk("set_parameters tuner bytes: 0x%02x 0x%02x " - "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]); - if (i2c_writebytes(state, state->config->pll_address ,buf, 4)) - printk(KERN_WARNING "or51132: set_parameters error " - "writing to tuner\n"); + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, param); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } /* Set to current mode */ or51132_setmode(fe); @@ -388,6 +395,44 @@ static int or51132_set_parameters(struct dvb_frontend* fe, return 0; } +static int or51132_get_parameters(struct dvb_frontend* fe, + struct dvb_frontend_parameters *param) +{ + struct or51132_state* state = fe->demodulator_priv; + u8 buf[2]; + + /* Receiver Status */ + buf[0]=0x04; + buf[1]=0x00; + msleep(30); /* 30ms */ + if (i2c_writebytes(state,state->config->demod_address,buf,2)) { + printk(KERN_WARNING "or51132: get_parameters write error\n"); + return -EREMOTEIO; + } + msleep(30); /* 30ms */ + if (i2c_readbytes(state,state->config->demod_address,buf,2)) { + printk(KERN_WARNING "or51132: get_parameters read error\n"); + return -EREMOTEIO; + } + switch(buf[0]) { + case 0x06: param->u.vsb.modulation = VSB_8; break; + case 0x43: param->u.vsb.modulation = QAM_64; break; + case 0x45: param->u.vsb.modulation = QAM_256; break; + default: + printk(KERN_WARNING "or51132: unknown status 0x%02x\n", + buf[0]); + return -EREMOTEIO; + } + + /* FIXME: Read frequency from frontend, take AFC into account */ + param->frequency = state->current_frequency; + + /* FIXME: How to read inversion setting? Receiver 6 register? */ + param->inversion = INVERSION_AUTO; + + return 0; +} + static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct or51132_state* state = fe->demodulator_priv; @@ -572,12 +617,11 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config, /* Setup the state */ state->config = config; state->i2c = i2c; - memcpy(&state->ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); state->current_frequency = -1; state->current_modulation = -1; /* Create dvb_frontend */ - state->frontend.ops = &state->ops; + memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; @@ -590,7 +634,7 @@ static struct dvb_frontend_ops or51132_ops = { .info = { .name = "Oren OR51132 VSB/QAM Frontend", - .type = FE_ATSC, + .type = FE_ATSC, .frequency_min = 44000000, .frequency_max = 958000000, .frequency_stepsize = 166666, @@ -606,6 +650,7 @@ static struct dvb_frontend_ops or51132_ops = { .sleep = or51132_sleep, .set_frontend = or51132_set_parameters, + .get_frontend = or51132_get_parameters, .get_tune_settings = or51132_get_tune_settings, .read_status = or51132_read_status,