X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fmedia%2Fdvb%2Fttpci%2Fbudget-av.c;fp=drivers%2Fmedia%2Fdvb%2Fttpci%2Fbudget-av.c;h=89ab4b59155cde27035bcb4ce4d8f3a887c8eac7;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=adba47ce88e56e7074a4aa6cfac14a46b3eeb6b6;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index adba47ce8..89ab4b591 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -37,6 +37,7 @@ #include "stv0299.h" #include "tda10021.h" #include "tda1004x.h" +#include "tua6100.h" #include "dvb-pll.h" #include #include @@ -50,6 +51,12 @@ #define DEBICICAM 0x02420000 +#define SLOTSTATUS_NONE 1 +#define SLOTSTATUS_PRESENT 2 +#define SLOTSTATUS_RESET 4 +#define SLOTSTATUS_READY 8 +#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) + struct budget_av { struct budget budget; struct video_device *vd; @@ -58,13 +65,20 @@ struct budget_av { struct tasklet_struct ciintf_irq_tasklet; int slot_status; struct dvb_ca_en50221 ca; + u8 reinitialise_demod:1; + u8 tda10021_poclkp:1; + u8 tda10021_ts_enabled; + int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p); }; -/* GPIO CI Connections: - * 0 - Vcc/Reset (Reset is controlled by capacitor) - * 1 - Attribute Memory - * 2 - Card Enable (Active Low) - * 3 - Card Detect +static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot); + + +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect */ /**************************************************************************** @@ -129,9 +143,10 @@ static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int ad udelay(1); result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 1\n"); + } return result; } @@ -147,9 +162,10 @@ static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int a udelay(1); result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 2\n"); + } return result; } @@ -165,9 +181,11 @@ static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 addre udelay(1); result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 3\n"); + return -ETIMEDOUT; + } return result; } @@ -183,9 +201,10 @@ static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 addr udelay(1); result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0); - - if (result == -ETIMEDOUT) - budget_av->slot_status = 0; + if (result == -ETIMEDOUT) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 5\n"); + } return result; } @@ -193,12 +212,12 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int timeout = 50; // 5 seconds (4.4.6 Ready) if (slot != 0) return -EINVAL; dprintk(1, "ciintf_slot_reset\n"); + budget_av->slot_status = SLOTSTATUS_RESET; saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ @@ -208,17 +227,17 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) msleep(20); /* 20 ms Vcc settling time */ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + msleep(20); - /* This should have been based on pin 16 READY of the pcmcia port, - * but AFAICS it is not routed to the saa7146 */ - while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) - msleep(100); + /* reinitialise the frontend if necessary */ + if (budget_av->reinitialise_demod) + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); - if (timeout <= 0) - { - printk(KERN_ERR "budget-av: cam reset failed (timeout).\n"); - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - return -ETIMEDOUT; + /* set tda10021 back to original clock configuration on reset */ + if (budget_av->tda10021_poclkp) { + tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); + budget_av->tda10021_ts_enabled = 0; } return 0; @@ -235,7 +254,13 @@ static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) dprintk(1, "ciintf_slot_shutdown\n"); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - budget_av->slot_status = 0; + budget_av->slot_status = SLOTSTATUS_NONE; + + /* set tda10021 back to original clock configuration when cam removed */ + if (budget_av->tda10021_poclkp) { + tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); + budget_av->tda10021_ts_enabled = 0; + } return 0; } @@ -250,6 +275,13 @@ static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status); ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); + + /* tda10021 seems to need a different TS clock config when data is routed to the CAM */ + if (budget_av->tda10021_poclkp) { + tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1); + budget_av->tda10021_ts_enabled = 1; + } + return 0; } @@ -257,50 +289,61 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int cam_present = 0; + int result; if (slot != 0) return -EINVAL; - if (!budget_av->slot_status) - { - // first of all test the card detect line + /* test the card detect line - needs to be done carefully + * since it never goes high for some CAMs on this interface (e.g. topuptv) */ + if (budget_av->slot_status == SLOTSTATUS_NONE) { saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); udelay(1); - if (saa7146_read(saa, PSR) & MASK_06) - { - cam_present = 1; + if (saa7146_read(saa, PSR) & MASK_06) { + if (budget_av->slot_status == SLOTSTATUS_NONE) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + printk(KERN_INFO "budget-av: cam inserted A\n"); + } } saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + } - // that is unreliable however, so try and read from IO memory - if (!cam_present) - { - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT) - { - cam_present = 1; + /* We also try and read from IO memory to work round the above detection bug. If + * there is no CAM, we will get a timeout. Only done if there is no cam + * present, since this test actually breaks some cams :( + * + * if the CI interface is not open, we also do the above test since we + * don't care if the cam has problems - we'll be resetting it on open() anyway */ + if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1); + if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) { + budget_av->slot_status = SLOTSTATUS_PRESENT; + printk(KERN_INFO "budget-av: cam inserted B\n"); + } else if (result < 0) { + if (budget_av->slot_status != SLOTSTATUS_NONE) { + ciintf_slot_shutdown(ca, slot); + printk(KERN_INFO "budget-av: cam ejected 5\n"); + return 0; } } + } - // did we find something? - if (cam_present) { - printk(KERN_INFO "budget-av: cam inserted\n"); - budget_av->slot_status = 1; - } - } else if (!open) { - saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); - if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT) - { - printk(KERN_INFO "budget-av: cam ejected\n"); - saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - budget_av->slot_status = 0; + /* read from attribute memory in reset/ready state to know when the CAM is ready */ + if (budget_av->slot_status == SLOTSTATUS_RESET) { + result = ciintf_read_attribute_mem(ca, slot, 0); + if (result == 0x1d) { + budget_av->slot_status = SLOTSTATUS_READY; } } - if (budget_av->slot_status == 1) - return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; - + /* work out correct return code */ + if (budget_av->slot_status != SLOTSTATUS_NONE) { + if (budget_av->slot_status & SLOTSTATUS_READY) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } + return DVB_CA_EN50221_POLL_CAM_PRESENT; + } return 0; } @@ -317,7 +360,7 @@ static int ciintf_init(struct budget_av *budget_av) saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); /* Enable DEBI pins */ - saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800); + saa7146_write(saa, MC1, MASK_27 | MASK_11); /* register CI interface */ budget_av->ca.owner = THIS_MODULE; @@ -330,6 +373,8 @@ static int ciintf_init(struct budget_av *budget_av) budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; budget_av->ca.poll_slot_status = ciintf_poll_slot_status; budget_av->ca.data = budget_av; + budget_av->budget.ci_present = 1; + budget_av->slot_status = SLOTSTATUS_NONE; if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, &budget_av->ca, 0, 1)) != 0) { @@ -338,11 +383,10 @@ static int ciintf_init(struct budget_av *budget_av) } printk(KERN_INFO "budget-av: ci interface initialised.\n"); - budget_av->budget.ci_present = 1; return 0; error: - saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16)); + saa7146_write(saa, MC1, MASK_27); return result; } @@ -359,7 +403,7 @@ static void ciintf_deinit(struct budget_av *budget_av) dvb_ca_en50221_release(&budget_av->ca); /* disable DEBI pins */ - saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16)); + saa7146_write(saa, MC1, MASK_27); } @@ -469,12 +513,12 @@ static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 sra return 0; } -static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct dvb_frontend_parameters *params) +static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) { u32 div; u8 buf[4]; + struct budget *budget = (struct budget *) fe->dvb->priv; struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; if ((params->frequency < 950000) || (params->frequency > 2150000)) @@ -498,142 +542,10 @@ static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe, else if (params->frequency < 2150000) buf[3] |= 0xC0; - if (i2c_transfer(i2c, &msg, 1) != 1) - return -EIO; - return 0; -} - -#define MIN2(a,b) ((a) < (b) ? (a) : (b)) -#define MIN3(a,b,c) MIN2(MIN2(a,b),c) - -static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct dvb_frontend_parameters *params) -{ - u8 reg0 [2] = { 0x00, 0x00 }; - u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 }; - u8 reg2 [3] = { 0x02, 0x00, 0x00 }; - int _fband; - int first_ZF; - int R, A, N, P, M; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 }; - int freq = params->frequency; - - first_ZF = (freq) / 1000; - - if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) < - abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890)))) - _fband = 2; - else - _fband = 3; - - if (_fband == 2) { - if (((first_ZF >= 950) && (first_ZF < 1350)) || - ((first_ZF >= 1430) && (first_ZF < 1950))) - reg0[1] = 0x07; - else if (((first_ZF >= 1350) && (first_ZF < 1430)) || - ((first_ZF >= 1950) && (first_ZF < 2150))) - reg0[1] = 0x0B; - } - - if(_fband == 3) { - if (((first_ZF >= 950) && (first_ZF < 1350)) || - ((first_ZF >= 1455) && (first_ZF < 1950))) - reg0[1] = 0x07; - else if (((first_ZF >= 1350) && (first_ZF < 1420)) || - ((first_ZF >= 1950) && (first_ZF < 2150))) - reg0[1] = 0x0B; - else if ((first_ZF >= 1420) && (first_ZF < 1455)) - reg0[1] = 0x0F; - } - - if (first_ZF > 1525) - reg1[1] |= 0x80; - else - reg1[1] &= 0x7F; - - if (_fband == 2) { - if (first_ZF > 1430) { /* 1430MHZ */ - reg1[1] &= 0xCF; /* N2 */ - reg2[1] &= 0xCF; /* R2 */ - reg2[1] |= 0x10; - } else { - reg1[1] &= 0xCF; /* N2 */ - reg1[1] |= 0x20; - reg2[1] &= 0xCF; /* R2 */ - reg2[1] |= 0x10; - } - } - - if (_fband == 3) { - if ((first_ZF >= 1455) && - (first_ZF < 1630)) { - reg1[1] &= 0xCF; /* N2 */ - reg1[1] |= 0x20; - reg2[1] &= 0xCF; /* R2 */ - } else { - if (first_ZF < 1455) { - reg1[1] &= 0xCF; /* N2 */ - reg1[1] |= 0x20; - reg2[1] &= 0xCF; /* R2 */ - reg2[1] |= 0x10; - } else { - if (first_ZF >= 1630) { - reg1[1] &= 0xCF; /* N2 */ - reg2[1] &= 0xCF; /* R2 */ - reg2[1] |= 0x10; - } - } - } - } - - /* set ports, enable P0 for symbol rates > 4Ms/s */ - if (params->u.qpsk.symbol_rate >= 4000000) - reg1[1] |= 0x0c; - else - reg1[1] |= 0x04; - - reg2[1] |= 0x0c; - - R = 64; - A = 64; - P = 64; //32 - - M = (freq * R) / 4; /* in Mhz */ - N = (M - A * 1000) / (P * 1000); - - reg1[1] |= (N >> 9) & 0x03; - reg1[2] = (N >> 1) & 0xff; - reg1[3] = (N << 7) & 0x80; - - reg2[1] |= (R >> 8) & 0x03; - reg2[2] = R & 0xFF; /* R */ - - reg1[3] |= A & 0x7f; /* A */ - - if (P == 64) - reg1[1] |= 0x40; /* Prescaler 64/65 */ - - reg0[1] |= 0x03; - - /* already enabled - do not reenable i2c repeater or TX fails */ - msg.buf = reg0; - msg.len = sizeof(reg0); - if (i2c_transfer(i2c, &msg, 1) != 1) - return -EIO; - - stv0299_enable_plli2c(fe); - msg.buf = reg1; - msg.len = sizeof(reg1); - if (i2c_transfer(i2c, &msg, 1) != 1) - return -EIO; - - stv0299_enable_plli2c(fe); - msg.buf = reg2; - msg.len = sizeof(reg2); - if (i2c_transfer(i2c, &msg, 1) != 1) + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; } @@ -689,7 +601,6 @@ static struct stv0299_config typhoon_config = { .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, - .pll_set = philips_su1278_ty_ci_pll_set, }; @@ -703,7 +614,6 @@ static struct stv0299_config cinergy_1200s_config = { .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, - .pll_set = philips_su1278_ty_ci_pll_set, }; static struct stv0299_config cinergy_1200s_1894_0010_config = { @@ -716,10 +626,9 @@ static struct stv0299_config cinergy_1200s_1894_0010_config = { .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, - .pll_set = philips_su1278sh2_tua6100_pll_set, }; -static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct budget *budget = (struct budget *) fe->dvb->priv; u8 buf[4]; @@ -735,6 +644,8 @@ static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p buf[3] = (params->frequency < 150000000 ? 0x01 : params->frequency < 445000000 ? 0x02 : 0x04); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) return -EIO; return 0; @@ -742,19 +653,24 @@ static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p static struct tda10021_config philips_cu1216_config = { .demod_address = 0x0c, - .pll_set = philips_cu1216_pll_set, +}; + +static struct tda10021_config philips_cu1216_config_altaddress = { + .demod_address = 0x0d, }; -static int philips_tu1216_pll_init(struct dvb_frontend *fe) +static int philips_tu1216_tuner_init(struct dvb_frontend *fe) { struct budget *budget = (struct budget *) fe->dvb->priv; static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; // setup PLL configuration + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); @@ -762,7 +678,7 @@ static int philips_tu1216_pll_init(struct dvb_frontend *fe) return 0; } -static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct budget *budget = (struct budget *) fe->dvb->priv; u8 tuner_buf[4]; @@ -836,6 +752,8 @@ static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p tuner_buf[2] = 0xca; tuner_buf[3] = (cp << 5) | (filter << 3) | band; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) return -EIO; @@ -859,9 +777,6 @@ static struct tda1004x_config philips_tu1216_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .pll_init = philips_tu1216_pll_init, - .pll_set = philips_tu1216_pll_set, - .pll_sleep = NULL, .request_firmware = philips_tu1216_request_firmware, }; @@ -908,22 +823,24 @@ static u8 philips_sd1878_inittab[] = { 0xff, 0xff }; -static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct dvb_frontend_parameters *params) +static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) { u8 buf[4]; int rc; struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)}; + struct budget *budget = (struct budget *) fe->dvb->priv; if((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf, - params->frequency, 0); + params->frequency, 0); if(rc < 0) return rc; - if(i2c_transfer(i2c, &tuner_msg, 1) != 1) + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1) return -EIO; return 0; @@ -966,7 +883,7 @@ static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, static struct stv0299_config philips_sd1878_config = { .demod_address = 0x68, - .inittab = philips_sd1878_inittab, + .inittab = philips_sd1878_inittab, .mclk = 88000000UL, .invert = 0, .skip_reinit = 0, @@ -974,7 +891,6 @@ static struct stv0299_config philips_sd1878_config = { .volt13_op0_op1 = STV0299_VOLT13_OP0, .min_delay_ms = 100, .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, - .pll_set = philips_sd1878_tda8261_pll_set, }; static u8 read_pwm(struct budget_av *budget_av) @@ -1000,6 +916,9 @@ static u8 read_pwm(struct budget_av *budget_av) #define SUBID_DVBS_TV_STAR 0x0014 #define SUBID_DVBS_TV_STAR_CI 0x0016 +#define SUBID_DVBS_EASYWATCH_1 0x001a +#define SUBID_DVBS_EASYWATCH 0x001e +#define SUBID_DVBC_EASYWATCH 0x002a #define SUBID_DVBC_KNC1 0x0020 #define SUBID_DVBC_KNC1_PLUS 0x0021 #define SUBID_DVBC_CINERGY1200 0x1156 @@ -1008,6 +927,23 @@ static u8 read_pwm(struct budget_av *budget_av) #define SUBID_DVBT_KNC1 0x0030 #define SUBID_DVBT_CINERGY1200 0x1157 + +static int tda10021_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct budget_av* budget_av = fe->dvb->priv; + int result; + + result = budget_av->tda10021_set_frontend(fe, p); + if (budget_av->tda10021_ts_enabled) { + tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1); + } else { + tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0); + } + + return result; +} + static void frontend_init(struct budget_av *budget_av) { struct saa7146_dev * saa = budget_av->budget.dev; @@ -1016,10 +952,15 @@ static void frontend_init(struct budget_av *budget_av) /* Enable / PowerON Frontend */ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + /* Wait for PowerON */ + msleep(100); + + /* additional setup necessary for the PLUS cards */ switch (saa->pci->subsystem_device) { case SUBID_DVBS_KNC1_PLUS: case SUBID_DVBC_KNC1_PLUS: case SUBID_DVBT_KNC1_PLUS: + case SUBID_DVBC_EASYWATCH: saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); break; } @@ -1027,55 +968,80 @@ static void frontend_init(struct budget_av *budget_av) switch (saa->pci->subsystem_device) { case SUBID_DVBS_KNC1: + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBS_EASYWATCH_1: if (saa->pci->subsystem_vendor == 0x1894) { - fe = stv0299_attach(&cinergy_1200s_1894_0010_config, + fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config, &budget_av->budget.i2c_adap); + if (fe) { + dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap); + } } else { - fe = stv0299_attach(&typhoon_config, + fe = dvb_attach(stv0299_attach, &typhoon_config, &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } } break; case SUBID_DVBS_TV_STAR: case SUBID_DVBS_TV_STAR_CI: case SUBID_DVBS_CYNERGY1200N: - fe = stv0299_attach(&philips_sd1878_config, + case SUBID_DVBS_EASYWATCH: + fe = dvb_attach(stv0299_attach, &philips_sd1878_config, &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params; + } break; - case SUBID_DVBS_KNC1_PLUS: case SUBID_DVBS_TYPHOON: - fe = stv0299_attach(&typhoon_config, + fe = dvb_attach(stv0299_attach, &typhoon_config, &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } break; case SUBID_DVBS_CINERGY1200: - fe = stv0299_attach(&cinergy_1200s_config, + fe = dvb_attach(stv0299_attach, &cinergy_1200s_config, &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params; + } break; case SUBID_DVBC_KNC1: case SUBID_DVBC_KNC1_PLUS: - fe = tda10021_attach(&philips_cu1216_config, + case SUBID_DVBC_CINERGY1200: + case SUBID_DVBC_EASYWATCH: + budget_av->reinitialise_demod = 1; + fe = dvb_attach(tda10021_attach, &philips_cu1216_config, &budget_av->budget.i2c_adap, read_pwm(budget_av)); + if (fe == NULL) + fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); + if (fe) { + budget_av->tda10021_poclkp = 1; + budget_av->tda10021_set_frontend = fe->ops.set_frontend; + fe->ops.set_frontend = tda10021_set_frontend; + fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; + } break; case SUBID_DVBT_KNC1: case SUBID_DVBT_KNC1_PLUS: - fe = tda10046_attach(&philips_tu1216_config, - &budget_av->budget.i2c_adap); - break; - - case SUBID_DVBC_CINERGY1200: - fe = tda10021_attach(&philips_cu1216_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); - break; - case SUBID_DVBT_CINERGY1200: - fe = tda10046_attach(&philips_tu1216_config, + budget_av->reinitialise_demod = 1; + fe = dvb_attach(tda10046_attach, &philips_tu1216_config, &budget_av->budget.i2c_adap); + if (fe) { + fe->ops.tuner_ops.init = philips_tu1216_tuner_init; + fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params; + } break; } @@ -1094,8 +1060,7 @@ static void frontend_init(struct budget_av *budget_av) if (dvb_register_frontend(&budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) { printk(KERN_ERR "budget-av: Frontend registration failed!\n"); - if (budget_av->budget.dvb_frontend->ops->release) - budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend); + dvb_frontend_detach(budget_av->budget.dvb_frontend); budget_av->budget.dvb_frontend = NULL; } } @@ -1129,8 +1094,10 @@ static int budget_av_detach(struct saa7146_dev *dev) if (budget_av->budget.ci_present) ciintf_deinit(budget_av); - if (budget_av->budget.dvb_frontend != NULL) + if (budget_av->budget.dvb_frontend != NULL) { dvb_unregister_frontend(budget_av->budget.dvb_frontend); + dvb_frontend_detach(budget_av->budget.dvb_frontend); + } err = ttpci_budget_deinit(&budget_av->budget); kfree(budget_av); @@ -1186,8 +1153,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio SAA7146_HPS_SYNC_PORT_A); saa7113_setinput(budget_av, 0); - } else { - ciintf_init(budget_av); } /* fixme: find some sane values here... */ @@ -1206,6 +1171,9 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio budget_av->budget.dvb_adapter.priv = budget_av; frontend_init(budget_av); + ciintf_init(budget_av); + + ttpci_budget_init_hooks(&budget_av->budget); return 0; } @@ -1286,6 +1254,9 @@ MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S); +MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP); MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); @@ -1299,8 +1270,12 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), + MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011), MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), + MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), + MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a), + MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a), MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), @@ -1318,7 +1293,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl); static struct saa7146_extension budget_extension = { .name = "budget_av", - .flags = SAA7146_I2C_SHORT_DELAY, + .flags = SAA7146_USE_I2C_IRQ, .pci_tbl = pci_tbl,