X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=b24c796f059585bd26167ef0146f7f92e78d1a70;hb=6a77f38946aaee1cd85eeec6cf4229b204c15071;hp=e7ea0b7a6496b047462fadf4d3f23585797b918b;hpb=87fc8d1bb10cd459024a742c6a10961fefcef18f;p=linux-2.6.git diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e7ea0b7a6..b24c796f0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -29,6 +29,7 @@ restrictions referred to are that the relevant option is valid if: CD Appropriate CD support is enabled. DEVFS devfs support is enabled. DRM Direct Rendering Management support is enabled. + EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. FB The frame buffer device is enabled. @@ -50,9 +51,11 @@ restrictions referred to are that the relevant option is valid if: MOUSE Appropriate mouse support is enabled. MTD MTD support is enabled. NET Appropriate network support is enabled. + NUMA NUMA support is enabled. NFS Appropriate NFS support is enabled. OSS OSS sound support is enabled. PARIDE The ParIDE subsystem is enabled. + PARISC The PA-RISC architecture is enabled. PCI PCI bus support is enabled. PCMCIA The PCMCIA subsystem is enabled. PNP Plug & Play support is enabled. @@ -149,6 +152,8 @@ running once the system is up. debugging. After system has booted up, it can be set via /proc/acpi/debug_level. + acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT + ad1816= [HW,OSS] Format: ,,, See also Documentation/sound/oss/AD1816. @@ -221,15 +226,19 @@ running once the system is up. atascsi= [HW,SCSI] Atari SCSI - atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess, EzKey - and similar keyboards + atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess, + EzKey and similar keyboards atkbd.reset= [HW] Reset keyboard during initialization atkbd.set= [HW] Select keyboard code set Format: (2 = AT (default) 3 = PS/2) - atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar keyboards + atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar + keyboards + + atkbd.softraw= [HW] Choose between synthetic and real raw mode + Format: (0 = real, 1 = synthetic (default)) atkbd.softrepeat= [HW] Use software keyboard repeat @@ -311,8 +320,24 @@ running once the system is up. condev= [HW,S390] console device conmode= - console= [KNL] Output console - Console device and comm spec (speed, control, parity). + console= [KNL] Output console device and options. + + tty Use the virtual console device . + + ttyS[,options] + Use the specified serial port. The options are of + the form "bbbbpn", where "bbbb" is the baud rate, + "p" is parity ("n", "o", or "e"), and "n" is bits. + Default is "9600n8". + + See also Documentation/serial-console.txt. + + uart,io,[,options] + uart,mmio,[,options] + Start an early, polled-mode console on the 8250/16550 + UART at the specified I/O port or MMIO address, + switching to the matching ttyS device later. The + options are the same as for ttyS, above. cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: ,,,[,] @@ -391,10 +416,14 @@ running once the system is up. edb= [HW,PS2] + edd= [EDD] + Format: {"of[f]" | "sk[ipmbr]"} + See comment in arch/i386/boot/edd.S + eicon= [HW,ISDN] Format: ,, - eisa_irq_edge= [PARISC] + eisa_irq_edge= [PARISC,HW] See header of drivers/parisc/eisa.c. elanfreq= [IA-32] @@ -403,7 +432,8 @@ running once the system is up. elevator= [IOSCHED] Format: {"as"|"cfq"|"deadline"|"noop"} - See Documentation/as-iosched.txt for details + See Documentation/block/as-iosched.txt + and Documentation/block/deadline-iosched.txt for details. es1370= [HW,OSS] Format: [,] @@ -456,6 +486,10 @@ running once the system is up. gvp11= [HW,SCSI] + hashdist= [KNL,NUMA] Large hashes allocated during boot + are distributed across NUMA nodes. Defaults on + for IA-64, off otherwise. + hcl= [IA-64] SGI's Hardware Graph compatibility layer hd= [EIDE] (E)IDE hard drive subsystem geometry @@ -480,6 +514,8 @@ running once the system is up. i8042.dumbkbd [HW] Pretend that controlled can only read data from keyboard and can not control its state (Don't attempt to blink the leds) + i8042.noacpi [HW] Don't use ACPI to discover KBD/AUX controller + settings i8042.noaux [HW] Don't check for auxiliary (== mouse) port i8042.nomux [HW] Don't check presence of an active multiplexing controller @@ -488,16 +524,26 @@ running once the system is up. i810= [HW,DRM] + i8k.force [HW] Activate i8k driver even if SMM BIOS signature + does not match list of supported models. + i8k.power_status + [HW] Report power status in /proc/i8k + (disabled by default) + i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN + capability is set. + ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter See Documentation/mca.txt. icn= [HW,ISDN] Format: [,[,[,]]] + ide= [HW] (E)IDE subsystem + Format: ide=nodma or ide=doubler or ide=reverse + See Documentation/ide.txt. + ide?= [HW] (E)IDE subsystem - Config (iomem/irq), tuning or debugging - (serialize,reset,no{dma,tune,probe}) or chipset - specific parameters. + Format: ide?=noprobe or chipset specific parameters. See Documentation/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed @@ -545,11 +591,13 @@ running once the system is up. Format: , , , isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler. - Format: , ..., + Format: ,..., This option can be used to specify one or more CPUs to isolate from the general SMP balancing and scheduling algorithms. The only way to move a process onto or off an "isolated" CPU is via the CPU affinity syscalls. + begins at 0 and the maximum value is + "number of CPUs in system - 1". This option is the preferred way to isolate CPUs. The alternative - manually setting the CPU mask of all tasks @@ -629,7 +677,11 @@ running once the system is up. mac53c9x= [HW,SCSI] Format: ,,,,,,, - + + machvec= [IA64] + Force the use of a particular machine-vector (machvec) in a generic + kernel. Example: machvec=hpzx1_swiotlb + mad16= [HW,OSS] Format: ,,,,,, @@ -643,9 +695,10 @@ running once the system is up. maxcpus= [SMP] Maximum number of processors that an SMP kernel should make use of - max_scsi_luns= [SCSI] + max_luns= [SCSI] Maximum number of LUNs to probe + Should be between 1 and 2^32-1. - max_scsi_report_luns= + max_report_luns= [SCSI] Maximum number of LUNs received Should be between 1 and 16384. @@ -670,6 +723,9 @@ running once the system is up. mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory Amount of memory to be used when the kernel is not able to see the whole system memory or for test. + [IA-32] Use together with memmap= to avoid physical + address space collisions. Without memmap= PCI devices + could be placed at addresses belonging to unused RAM. mem=nopentium [BUGS=IA-32] Disable usage of 4MB pages for kernel memory. @@ -692,7 +748,7 @@ running once the system is up. [KNL,ACPI] Mark specific memory as reserved. Region of memory to be used, from ss to ss+nn. - meye= [HW] Set MotionEye Camera parameters + meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. mga= [HW,DRM] @@ -754,8 +810,8 @@ running once the system is up. noalign [KNL,ARM] - noapic [SMP,APIC] Tells the kernel not to make use of any - APIC that may be present on the system. + noapic [SMP,APIC] Tells the kernel to not make use of any + IOAPICs that may be present in the system. noasync [HW,M68K] Disables async and sync negotiation for all devices. @@ -769,14 +825,12 @@ running once the system is up. noexec [IA-64] - noexec [i386] + noexec [i386, x86_64] noexec=on: enable non-executable mappings (default) noexec=off: disable nn-executable mappings nofxsr [BUGS=IA-32] - nohighio [BUGS=IA-32] Disable highmem block I/O. - nohlt [BUGS=ARM] no-hlt [BUGS=IA-32] Tells the kernel that the hlt @@ -842,6 +896,13 @@ running once the system is up. panic= [KNL] Kernel behaviour on panic Format: + parkbd.port= [HW] Parallel port number the keyboard adapter is + connected to, default is 0. + Format: + parkbd.mode= [HW] Parallel port keyboard adapter mode of operation, + 0 for XT, 1 for AT (default is AT). + Format: + parport=0 [HW,PPT] Specify parallel ports. 0 disables. parport=auto Use 'auto' to force the driver to use parport=0xBBB[,IRQ[,DMA]] any IRQ/DMA settings detected (the @@ -857,6 +918,16 @@ running once the system is up. order they are specified on the command line, starting with parport0. + parport_init_mode= + [HW,PPT] Configure VIA parallel port to + operate in specific mode. This is + necessary on Pegasos computer where + firmware has no options for setting up + parallel port mode and sets it to + spp. Currently this function knows + 686a and 8231 chips. + Format: [spp|ps2|epp|ecp|ecpepp] + pas2= [HW,OSS] Format: ,,,,,,, @@ -912,6 +983,10 @@ running once the system is up. enabled. noacpi [IA-32] Do not use ACPI for IRQ routing or for PCI scanning. + routeirq Do IRQ routing for all PCI devices. + This is normally done in pci_enable_device(), + so this option is a temporary workaround + for broken drivers that don't call it. firmware [ARM] Do not re-enumerate the bus but instead just use the configuration @@ -925,6 +1000,11 @@ running once the system is up. pd. [PARIDE] See Documentation/paride.txt. + pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at + boot time. + Format: { 0 | 1 } + See arch/parisc/kernel/pdc_chassis.c + pf. [PARIDE] See Documentation/paride.txt. @@ -938,6 +1018,9 @@ running once the system is up. Format: { parport | timid | 0 } See also Documentation/parport.txt. + pnpacpi= [ACPI] + { off } + pnpbios= [ISAPNP] { on | off | curr | res | no-curr | no-res } @@ -960,6 +1043,10 @@ running once the system is up. (param: profile step/bucket size as a power of 2 for statistical time based profiling) + processor.max_cstate= [HW, ACPI] + Limit processor to maximum C-state + max_cstate=9 overrides any DMI blacklist limit. + prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. See Documentation/ramdisk.txt. @@ -1001,10 +1088,6 @@ running once the system is up. New name for the ramdisk parameter. See Documentation/ramdisk.txt. - ramdisk_start= [RAM] Starting block of RAM disk image (so you can - place it after the kernel image on a boot floppy). - See Documentation/ramdisk.txt. - reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: [,[,...]] See arch/*/kernel/reboot.c. @@ -1023,6 +1106,9 @@ running once the system is up. root= [KNL] Root filesystem + rootdelay= [KNL] Delay (in seconds) to pause before attempting to + mount the root filesystem + rootflags= [KNL] Set root filesystem mount option string rootfstype= [KNL] Set root filesystem type @@ -1060,8 +1146,6 @@ running once the system is up. scsi_logging= [SCSI] - scsihosts= [SCSI] - serialnumber [BUGS=IA-32] sf16fm= [HW] SF16FMI radio driver for Linux @@ -1219,17 +1303,12 @@ running once the system is up. sonycd535= [HW,CD] Format: [,] - sonypi= [HW] Sony Programmable I/O Control Device driver - Format: ,,,,, + sonypi.*= [HW] Sony Programmable I/O Control Device driver + See Documentation/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter See Documentation/specialix.txt. - speedstep_coppermine= - [HW,IA-32] Take CPU in your notebook as SpeedStep-capable - See comment before function speedstep_setup() in - arch/i386/kernel/cpu/cpufreq/speedstep.c. - spia_io_base= [HW,MTD] spia_fio_base= spia_pedr= @@ -1244,7 +1323,7 @@ running once the system is up. st0x= [HW,SCSI] See header of drivers/scsi/seagate.c. - sti= [HW] + sti= [PARISC,HW] Format: Set the STI (builtin display/keyboard on the HP-PARISC machines) console (graphic card) which should be used @@ -1277,12 +1356,13 @@ running once the system is up. thash_entries= [KNL,NET] Set number of hash buckets for TCP connection - tipar= [HW] - See header of drivers/char/tipar.c. + tipar.timeout= [HW,PPT] + Set communications timeout in tenths of a second + (default 15). + + tipar.delay= [HW,PPT] + Set inter-bit delay in microseconds (default 10). - tiusb= [HW,USB] Texas Instruments' USB GraphLink (aka SilverLink) - Format: - tmc8xx= [HW,SCSI] See header of drivers/scsi/seagate.c. @@ -1311,6 +1391,8 @@ running once the system is up. uart6850= [HW,OSS] Format: , + + usb-handoff [HW] Enable early USB BIOS -> OS handoff video= [FB] Frame buffer configuration See Documentation/fb/modedb.txt.