X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=Documentation%2Fnetworking%2FREADME.ipw2200;fp=Documentation%2Fnetworking%2FREADME.ipw2200;h=c6492d3839fabaf4b73a6670ca1cb1aae2d6769d;hb=64ba3f394c830ec48a1c31b53dcae312c56f1604;hp=4f2a40f1dbc629837463a96695759e3848f41c68;hpb=be1e6109ac94a859551f8e1774eb9a8469fe055c;p=linux-2.6.git

diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index 4f2a40f1d..c6492d383 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -10,12 +10,12 @@ both hardware adapters listed above. In this document the Intel(R)
 PRO/Wireless 2915ABG Driver for Linux will be used to reference the
 unified driver.
 
-Copyright (C) 2004-2006, Intel Corporation
+Copyright (C) 2004-2005, Intel Corporation
 
 README.ipw2200
 
-Version: 1.1.2
-Date   : March 30, 2006
+Version: 1.0.8
+Date   : October 20, 2005
 
 
 Index
@@ -26,11 +26,9 @@ Index
 1.2. Module parameters
 1.3. Wireless Extension Private Methods
 1.4. Sysfs Helper Files
-1.5. Supported channels
 2.   Ad-Hoc Networking
 3.   Interacting with Wireless Tools
 3.1. iwconfig mode
-3.2. iwconfig sens
 4.   About the Version Numbers
 5.   Firmware installation
 6.   Support
@@ -103,7 +101,7 @@ file.
 
 1.1. Overview of Features
 -----------------------------------------------
-The current release (1.1.2) supports the following features:
+The current release (1.0.8) supports the following features:
 
 + BSS mode (Infrastructure, Managed)
 + IBSS mode (Ad-Hoc)
@@ -247,8 +245,8 @@ and can set the contents via echo.  For example:
 % cat /sys/bus/pci/drivers/ipw2200/debug_level
 
 Will report the current debug level of the driver's logging subsystem 
-(only available if CONFIG_IPW2200_DEBUG was configured when the driver
-was built).
+(only available if CONFIG_IPW_DEBUG was configured when the driver was 
+built).
 
 You can set the debug level via:
 
@@ -316,35 +314,6 @@ For the device level files, see /sys/bus/pci/drivers/ipw2200:
 	running ifconfig and is therefore disabled by default.
 
 
-1.5. Supported channels
------------------------------------------------
-
-Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a
-message stating the detected geography code and the number of 802.11
-channels supported by the card will be displayed in the log.
-
-The geography code corresponds to a regulatory domain as shown in the
-table below.
-
-					  Supported channels
-Code	Geography			802.11bg	802.11a
-
----	Restricted			11 	 	 0
-ZZF	Custom US/Canada		11	 	 8
-ZZD	Rest of World			13	 	 0
-ZZA	Custom USA & Europe & High	11		13
-ZZB	Custom NA & Europe    		11		13
-ZZC	Custom Japan			11	 	 4
-ZZM	Custom 				11	 	 0
-ZZE	Europe				13		19
-ZZJ	Custom Japan			14	 	 4
-ZZR	Rest of World			14	 	 0
-ZZH	High Band			13	 	 4
-ZZG	Custom Europe			13	 	 4
-ZZK	Europe 				13		24
-ZZL	Europe				11		13
-
-
 2.   Ad-Hoc Networking
 -----------------------------------------------
 
@@ -384,15 +353,6 @@ When configuring the mode of the adapter, all run-time configured parameters
 are reset to the value used when the module was loaded.  This includes
 channels, rates, ESSID, etc.
 
-3.2 iwconfig sens
------------------------------------------------
-
-The 'iwconfig ethX sens XX' command will not set the signal sensitivity
-threshold, as described in iwconfig documentation, but rather the number
-of consecutive missed beacons that will trigger handover, i.e. roaming
-to another access point. At the same time, it will set the disassociation
-threshold to 3 times the given value.
-
 
 4.   About the Version Numbers
 -----------------------------------------------
@@ -448,7 +408,7 @@ For general information and support, go to:
 7.  License
 -----------------------------------------------
 
-  Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
 
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License version 2 as