X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=Documentation%2Fusb%2Fmtouchusb.txt;h=cd806bfc8b81a42301be0130a741bb5b47f6343b;hb=d939d46ba7caa14e960be18e18f5c07be8806d7a;hp=f27200050ce9b97d774b233226539cbd2ba27344;hpb=86090fcac5e27b630656fe3d963a6b80e26dac44;p=linux-2.6.git

diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index f27200050..cd806bfc8 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -1,26 +1,38 @@
 CHANGES
 
-- Created based off of scanner & INSTALL from the original touchscreen
+- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
   driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
 - Amended for linux-2.4.18, then 2.4.19
 
-- Complete rewrite using Linux Input in 2.6.3
+- 0.5 - Complete rewrite using Linux Input in 2.6.3
    Unfortunately no calibration support at this time
 
+- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
+   Changed reset from standard USB dev reset to vendor reset
+   Changed data sent to host from compensated to raw coordinates
+   Eliminated vendor/product module params
+   Performed multiple successfull tests with an EXII-5010UC
 
-DRIVER NOTES:
+SUPPORTED HARDWARE:
+
+        All controllers have the Vendor: 0x0596 & Product: 0x0001
 
-Installation is simple, you only need to add Linux Input, Linux USB, and the 
-driver to the kernel.  The driver can also be optionally built as a module.
 
-If you have another MicroTouch device that you wish to experiment with
-or try using this driver with, but the Vendor and Product ID's are not 
-coded in, don't despair.  If the driver was compiled as a module, you can 
-pass options to the driver.  Simply try:
+        Controller Description          Part Number
+        ------------------------------------------------------
 
-  /sbin/modprobe mtouchusb vendor=0x#### product=0x****
+        USB Capacitive - Pearl Case     14-205  (Discontinued)
+        USB Capacitive - Black Case     14-124  (Discontinued)
+        USB Capacitive - No Case        14-206  (Discontinued)
 
-If it works, send me the iVendor & iProduct (or a patch) and I will add...
+        USB Capacitive - Pearl Case     EXII-5010UC
+        USB Capacitive - Black Case     EXII-5030UC
+        USB Capacitive - No Case        EXII-5050UC
+
+DRIVER NOTES:
+
+Installation is simple, you only need to add Linux Input, Linux USB, and the 
+driver to the kernel.  The driver can also be optionally built as a module.
 
 This driver appears to be one of possible 2 Linux USB Input Touchscreen
 drivers.  Although 3M produces a binary only driver available for
@@ -28,53 +40,28 @@ download, I persist in updating this driver since I would like to use the
 touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
 logical choice is to use Linux Imput.
 
-A little info about the MicroTouch USB controller (14-206):
-
-Y is inverted, and the device has a total possible resolution of 0 - 65535.
-
-Y is inverted by the driver by:
-
-        input.absmin[ABS_Y] =  MTOUCHUSB_MAX_YC;
-        input.absmax[ABS_Y] =  MTOUCHUSB_MIN_YC;
-
-absmin & absmax are also used to scale the data, sine it is rather high 
-resolution.
-
-    ---------------touch screen area-----------------
-    I                        MicroTouch (xmax,ymax) @I
-    I                      X                         I
-    I   ########visible monitor area##############   I
-    I   #@ (xmin,ymin)                           #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I Y #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                                        #   I
-    I   #                           (xmax,ymax) @#   I
-    I   ##########################################   I
-    I                                                I
-    I@ MicroTouch (xmin,ymin)                        I
-    -------------------------------------------------
-
-Currently there is no way to calibrate the device via this driver.  Perhaps 
-at some point an abstract function will be placed into evdev so generic 
-functions like calibrations, resets, and vendor information can be requested 
-(And the drivers would handle the vendor specific tasks).
-
-ADDITIONAL INFORMATION/UPDATES:
+Currently there is no way to calibrate the device via this driver.  Even if
+the device could be calibrated, the driver pulls to raw coordinate data from
+the controller.  This means calibration must be performed within the
+userspace.
+
+The controller screen resolution is now 0 to 16384 for both X and Y reporting
+the raw touch data.  This is the same for the old and new capacitive USB
+controllers.
+
+Perhaps at some point an abstract function will be placed into evdev so 
+generic functions like calibrations, resets, and vendor information can be 
+requested from the userspace (And the drivers would handle the vendor specific
+tasks).
+
+ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
 
 http://groomlakelabs.com/grandamp/code/microtouch/
 
 TODO:
 
 Implement a control urb again to handle requests to and from the device
-such as calibration, etc.
+such as calibration, etc once/if it becomes available.
 
 DISCLAMER:
 
@@ -83,3 +70,7 @@ this driver!  If you want touch drivers only supported within X, please go to:
 
 http://www.3m.com/3MTouchSystems/downloads/
 
+THANKS:
+
+A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
+testing!